@@ -7,6 +7,7 @@
menuconfig DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+ select DRM_PANEL_ORIENTATION_QUIRKS
select HDMI
select FB_CMDLINE
select I2C
@@ -24,6 +24,7 @@
#include <drm/drm_connector.h>
#include <drm/drm_edid.h>
#include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
mutex_init(&connector->mutex);
connector->edid_blob_ptr = NULL;
connector->status = connector_status_unknown;
+ connector->display_info.panel_orientation =
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
drm_connector_get_cmdline_mode(connector);
@@ -668,6 +671,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
};
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+ { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" },
+ { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" },
+ { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" },
+ { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" },
+};
+
static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
@@ -776,6 +786,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
*
* CRTC_ID:
* Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ * On some devices the LCD panel is mounted in the casing in such a way
+ * that the up/top side of the panel does not match with the top side of
+ * the device. Userspace can use this property to check for this.
+ * Note that input coordinates from touchscreens (input devices with
+ * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ * coordinates, so if userspace rotates the picture to adjust for
+ * the orientation it must also apply the same transformation to the
+ * touchscreen input coordinates.
*/
int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1251,6 +1273,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
}
EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
+/**
+ * drm_connector_init_panel_orientation_property -
+ * initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector, int width, int height)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_display_info *info = &connector->display_info;
+ struct drm_property *prop;
+ int orientation_quirk;
+
+ orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+ if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ info->panel_orientation = orientation_quirk;
+
+ if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ return 0;
+
+ prop = dev->mode_config.panel_orientation_property;
+ if (!prop) {
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+ "panel orientation",
+ drm_panel_orientation_enum_list,
+ ARRAY_SIZE(drm_panel_orientation_enum_list));
+ if (!prop)
+ return -ENOMEM;
+
+ dev->mode_config.panel_orientation_property = prop;
+ }
+
+ drm_object_attach_property(&connector->base, prop,
+ info->panel_orientation);
+ return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
@@ -175,6 +175,35 @@ enum drm_link_status {
DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
};
+/**
+ * enum drm_panel_orientation - panel_orientation info for &drm_display_info
+ *
+ * This enum is used to track the (LCD) panel orientation. There are no
+ * separate #defines for the uapi!
+ *
+ * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any
+ * panel orientation information (normal
+ * for non panels) in this case the "panel
+ * orientation" connector prop will not be
+ * attached.
+ * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the
+ * top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the
+ * bottom side of the device's casing, iow
+ * the panel is mounted upside-down.
+ * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the
+ * top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the
+ * top side of the device's casing.
+ */
+enum drm_panel_orientation {
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1,
+ DRM_MODE_PANEL_ORIENTATION_NORMAL = 0,
+ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,
+ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
/**
* struct drm_display_info - runtime data about the connected sink
*
@@ -222,6 +251,15 @@ struct drm_display_info {
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
#define DRM_COLOR_FORMAT_YCRCB420 (1<<3)
+ /**
+ * @panel_orientation: Read only connector property for built-in panels,
+ * indicating the orientation of the panel vs the device's casing.
+ * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+ * fb to compensate and gets exported as prop to userspace.
+ */
+ int panel_orientation;
+
/**
* @color_formats: HDMI Color formats, selects between RGB and YCrCb
* modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1025,6 +1063,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
const struct edid *edid);
void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector, int width, int height);
/**
* struct drm_tile_group - Tile group metadata
@@ -735,6 +735,13 @@ struct drm_mode_config {
*/
struct drm_property *non_desktop_property;
+ /**
+ * @panel_orientation_property: Optional connector property indicating
+ * how the lcd-panel is mounted inside the casing (e.g. normal or
+ * upside-down).
+ */
+ struct drm_property *panel_orientation_property;
+
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;