| Message ID | 20180114210711.13863-4-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 14/01/18 21:07, Wolfram Sang wrote: > The documentation was wrong, gpiod_get_direction() returns 0/1 instead > of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 > ("gpio: correct docs about return value of gpiod_get_direction"). Now, > fix this user (until a better, system-wide solution is in place). > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> > --- > Only build tested! > > drivers/video/backlight/pwm_bl.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index 1c2289ddd555a6..0fa7d2bd0e4811 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -301,14 +301,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) > > /* > * If the GPIO is not known to be already configured as output, that > - * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL, > - * change the direction to output and set the GPIO as active. > + * is, if gpiod_get_direction returns either 1 or -EINVAL, change the > + * direction to output and set the GPIO as active. > * Do not force the GPIO to active when it was already output as it > * could cause backlight flickering or we would enable the backlight too > * early. Leave the decision of the initial backlight state for later. > */ > if (pb->enable_gpio && > - gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT) > + gpiod_get_direction(pb->enable_gpio) != 0) > gpiod_direction_output(pb->enable_gpio, 1); > > pb->power_supply = devm_regulator_get(&pdev->dev, "power"); > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, 14 Jan 2018, Wolfram Sang wrote: > The documentation was wrong, gpiod_get_direction() returns 0/1 instead > of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 > ("gpio: correct docs about return value of gpiod_get_direction"). Now, > fix this user (until a better, system-wide solution is in place). > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > Only build tested! > > drivers/video/backlight/pwm_bl.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) Applied with Daniel and Simon's Acks.
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 1c2289ddd555a6..0fa7d2bd0e4811 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -301,14 +301,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) /* * If the GPIO is not known to be already configured as output, that - * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL, - * change the direction to output and set the GPIO as active. + * is, if gpiod_get_direction returns either 1 or -EINVAL, change the + * direction to output and set the GPIO as active. * Do not force the GPIO to active when it was already output as it * could cause backlight flickering or we would enable the backlight too * early. Leave the decision of the initial backlight state for later. */ if (pb->enable_gpio && - gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT) + gpiod_get_direction(pb->enable_gpio) != 0) gpiod_direction_output(pb->enable_gpio, 1); pb->power_supply = devm_regulator_get(&pdev->dev, "power");
The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 ("gpio: correct docs about return value of gpiod_get_direction"). Now, fix this user (until a better, system-wide solution is in place). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Only build tested! drivers/video/backlight/pwm_bl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)