| Message ID | 20180115161431.803248-1-arnd@arndb.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Monday, January 15, 2018 05:14:04 PM Arnd Bergmann wrote: > Using a Kconfig 'select' statement for a user-visible symbol that other > drivers depend on often causes circular dependencies. A new one showed > up when I wanted to add an NVMEM dependency to the DRM_MSM driver: > > drivers/i2c/Kconfig:7:error: recursive dependency detected! > drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC > drivers/video/fbdev/Kconfig:63: symbol FB_DDC is selected by FB_CYBER2000_DDC > drivers/video/fbdev/Kconfig:390: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 > drivers/video/fbdev/Kconfig:378: symbol FB_CYBER2000 depends on FB > drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER > drivers/gpu/drm/Kconfig:77: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER > drivers/gpu/drm/Kconfig:71: symbol DRM_KMS_HELPER is selected by DRM_MSM > drivers/gpu/drm/msm/Kconfig:2: symbol DRM_MSM depends on NVMEM > drivers/nvmem/Kconfig:1: symbol NVMEM is selected by EEPROM_AT24 > drivers/misc/eeprom/Kconfig:3: symbol EEPROM_AT24 depends on I2C > > Here, the problem is that many fbdev drivers have an i2c based interface > and just 'select i2c' for that, while we also select the framebuffer > subsystem indirectly from a DRM driver that now depends on i2c. > > This does away with the 'select' statement and instead uses 'depends on', > like almost all I2C users. I worry that this change may cause various driver options to no longer be visible to people configuring their kernels and not having I2C already selected. DRM somehow manages to select I2C and I would prefer to be it the same way for fbdev (also looking at the current next tree there are still some drivers that 'select I2C').. > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > drivers/video/fbdev/Kconfig | 19 +++++++++++++++---- > 1 file changed, 15 insertions(+), 4 deletions(-) > > diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig > index 6962b4583fd7..892eb1863100 100644 > --- a/drivers/video/fbdev/Kconfig > +++ b/drivers/video/fbdev/Kconfig > @@ -64,7 +64,6 @@ config FB_DDC > tristate > depends on FB > select I2C_ALGOBIT > - select I2C > default n > > config FB_BOOT_VESA_SUPPORT > @@ -390,6 +389,7 @@ config FB_CYBER2000 > config FB_CYBER2000_DDC > bool "DDC for CyberPro support" > depends on FB_CYBER2000 > + depends on I2C=y || I2C=FB_CYBER2000 > select FB_DDC > default y > help > @@ -634,7 +634,7 @@ config FB_BF537_LQ035 > config FB_BFIN_7393 > tristate "Blackfin ADV7393 Video encoder" > depends on FB && BLACKFIN > - select I2C > + depends on I2C > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > @@ -1026,6 +1026,7 @@ config FB_NVIDIA > config FB_NVIDIA_I2C > bool "Enable DDC Support" > depends on FB_NVIDIA > + depends on I2C=y || I2C=FB_NVIDIA > select FB_DDC > help > This enables I2C support for nVidia Chipsets. This is used > @@ -1073,6 +1074,7 @@ config FB_RIVA > config FB_RIVA_I2C > bool "Enable DDC Support" > depends on FB_RIVA > + depends on I2C=y || I2C=FB_RIVA > select FB_DDC > help > This enables I2C support for nVidia Chipsets. This is used > @@ -1102,6 +1104,7 @@ config FB_RIVA_BACKLIGHT > config FB_I740 > tristate "Intel740 support" > depends on FB && PCI > + depends on I2C > select FB_MODE_HELPERS > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > @@ -1155,6 +1158,7 @@ config FB_I810_GTF > config FB_I810_I2C > bool "Enable DDC Support" > depends on FB_I810 && FB_I810_GTF > + depends on I2C=y || I2C=FB_I810 > select FB_DDC > help > > @@ -1206,6 +1210,7 @@ config FB_INTEL_DEBUG > config FB_INTEL_I2C > bool "DDC/I2C for Intel framebuffer support" > depends on FB_INTEL > + depends on I2C=y || I2C=FB_INTEL > select FB_DDC > default y > help > @@ -1285,6 +1290,7 @@ config FB_MATROX_G > config FB_MATROX_I2C > tristate "Matrox I2C support" > depends on FB_MATROX > + depends on I2C > select FB_DDC > ---help--- > This drivers creates I2C buses which are needed for accessing the > @@ -1350,6 +1356,7 @@ config FB_RADEON > config FB_RADEON_I2C > bool "DDC/I2C for ATI Radeon support" > depends on FB_RADEON > + depends on I2C=y || I2C=FB_RADEON > select FB_DDC > default y > help > @@ -1460,6 +1467,7 @@ config FB_S3 > config FB_S3_DDC > bool "DDC for S3 support" > depends on FB_S3 > + depends on I2C=y || I2C=FB_S3 > select FB_DDC > default y > help > @@ -1485,6 +1493,7 @@ config FB_SAVAGE > config FB_SAVAGE_I2C > bool "Enable DDC2 Support" > depends on FB_SAVAGE > + depends on I2C=y || I2C=FB_SAVAGE > select FB_DDC > help > This enables I2C support for S3 Savage Chipsets. This is used > @@ -1629,6 +1638,7 @@ config FB_3DFX_ACCEL > config FB_3DFX_I2C > bool "Enable DDC/I2C support" > depends on FB_3DFX > + depends on I2C=y || I2C=FB_3DFX > select FB_DDC > default y > help > @@ -1669,6 +1679,7 @@ config FB_VT8623 > config FB_TRIDENT > tristate "Trident/CyberXXX/CyberBlade support" > depends on FB && PCI > + depends on I2C > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > @@ -2299,8 +2310,8 @@ endchoice > > config FB_MB862XX_I2C > bool "Support I2C bus on MB862XX GDC" > - depends on FB_MB862XX && I2C > - depends on FB_MB862XX=m || I2C=y > + depends on FB_MB862XX > + depends on I2C=y || I2C=FB_MB862XX > default y > help > Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/01/2018 08:14 AM, Bartlomiej Zolnierkiewicz wrote: > On Monday, January 15, 2018 05:14:04 PM Arnd Bergmann wrote: >> Using a Kconfig 'select' statement for a user-visible symbol that other >> drivers depend on often causes circular dependencies. A new one showed >> up when I wanted to add an NVMEM dependency to the DRM_MSM driver: >> >> drivers/i2c/Kconfig:7:error: recursive dependency detected! >> drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC >> drivers/video/fbdev/Kconfig:63: symbol FB_DDC is selected by FB_CYBER2000_DDC >> drivers/video/fbdev/Kconfig:390: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 >> drivers/video/fbdev/Kconfig:378: symbol FB_CYBER2000 depends on FB >> drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER >> drivers/gpu/drm/Kconfig:77: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER >> drivers/gpu/drm/Kconfig:71: symbol DRM_KMS_HELPER is selected by DRM_MSM >> drivers/gpu/drm/msm/Kconfig:2: symbol DRM_MSM depends on NVMEM >> drivers/nvmem/Kconfig:1: symbol NVMEM is selected by EEPROM_AT24 >> drivers/misc/eeprom/Kconfig:3: symbol EEPROM_AT24 depends on I2C >> >> Here, the problem is that many fbdev drivers have an i2c based interface >> and just 'select i2c' for that, while we also select the framebuffer >> subsystem indirectly from a DRM driver that now depends on i2c. >> >> This does away with the 'select' statement and instead uses 'depends on', >> like almost all I2C users. > > I worry that this change may cause various driver options to no longer > be visible to people configuring their kernels and not having I2C already > selected. > > DRM somehow manages to select I2C and I would prefer to be it the same > way for fbdev (also looking at the current next tree there are still > some drivers that 'select I2C').. a. Linus has stated that a driver should not enable an entire subsystem, so depends on would be better than select. If I had the email/patch, I would be glad to Ack it. b. DRM configuration is a mess. You shouldn't want to follow their model. :) c. If I2C is not enabled in the FB menu, someone could just add something like this: comment "Enable I2C to see more driver choices" depends on !I2C >> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >> --- >> drivers/video/fbdev/Kconfig | 19 +++++++++++++++---- >> 1 file changed, 15 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig >> index 6962b4583fd7..892eb1863100 100644 >> --- a/drivers/video/fbdev/Kconfig >> +++ b/drivers/video/fbdev/Kconfig >> @@ -64,7 +64,6 @@ config FB_DDC >> tristate >> depends on FB >> select I2C_ALGOBIT >> - select I2C >> default n >> >> config FB_BOOT_VESA_SUPPORT >> @@ -390,6 +389,7 @@ config FB_CYBER2000 >> config FB_CYBER2000_DDC >> bool "DDC for CyberPro support" >> depends on FB_CYBER2000 >> + depends on I2C=y || I2C=FB_CYBER2000 >> select FB_DDC >> default y >> help >> @@ -634,7 +634,7 @@ config FB_BF537_LQ035 >> config FB_BFIN_7393 >> tristate "Blackfin ADV7393 Video encoder" >> depends on FB && BLACKFIN >> - select I2C >> + depends on I2C >> select FB_CFB_FILLRECT >> select FB_CFB_COPYAREA >> select FB_CFB_IMAGEBLIT >> @@ -1026,6 +1026,7 @@ config FB_NVIDIA >> config FB_NVIDIA_I2C >> bool "Enable DDC Support" >> depends on FB_NVIDIA >> + depends on I2C=y || I2C=FB_NVIDIA >> select FB_DDC >> help >> This enables I2C support for nVidia Chipsets. This is used >> @@ -1073,6 +1074,7 @@ config FB_RIVA >> config FB_RIVA_I2C >> bool "Enable DDC Support" >> depends on FB_RIVA >> + depends on I2C=y || I2C=FB_RIVA >> select FB_DDC >> help >> This enables I2C support for nVidia Chipsets. This is used >> @@ -1102,6 +1104,7 @@ config FB_RIVA_BACKLIGHT >> config FB_I740 >> tristate "Intel740 support" >> depends on FB && PCI >> + depends on I2C >> select FB_MODE_HELPERS >> select FB_CFB_FILLRECT >> select FB_CFB_COPYAREA >> @@ -1155,6 +1158,7 @@ config FB_I810_GTF >> config FB_I810_I2C >> bool "Enable DDC Support" >> depends on FB_I810 && FB_I810_GTF >> + depends on I2C=y || I2C=FB_I810 >> select FB_DDC >> help >> >> @@ -1206,6 +1210,7 @@ config FB_INTEL_DEBUG >> config FB_INTEL_I2C >> bool "DDC/I2C for Intel framebuffer support" >> depends on FB_INTEL >> + depends on I2C=y || I2C=FB_INTEL >> select FB_DDC >> default y >> help >> @@ -1285,6 +1290,7 @@ config FB_MATROX_G >> config FB_MATROX_I2C >> tristate "Matrox I2C support" >> depends on FB_MATROX >> + depends on I2C >> select FB_DDC >> ---help--- >> This drivers creates I2C buses which are needed for accessing the >> @@ -1350,6 +1356,7 @@ config FB_RADEON >> config FB_RADEON_I2C >> bool "DDC/I2C for ATI Radeon support" >> depends on FB_RADEON >> + depends on I2C=y || I2C=FB_RADEON >> select FB_DDC >> default y >> help >> @@ -1460,6 +1467,7 @@ config FB_S3 >> config FB_S3_DDC >> bool "DDC for S3 support" >> depends on FB_S3 >> + depends on I2C=y || I2C=FB_S3 >> select FB_DDC >> default y >> help >> @@ -1485,6 +1493,7 @@ config FB_SAVAGE >> config FB_SAVAGE_I2C >> bool "Enable DDC2 Support" >> depends on FB_SAVAGE >> + depends on I2C=y || I2C=FB_SAVAGE >> select FB_DDC >> help >> This enables I2C support for S3 Savage Chipsets. This is used >> @@ -1629,6 +1638,7 @@ config FB_3DFX_ACCEL >> config FB_3DFX_I2C >> bool "Enable DDC/I2C support" >> depends on FB_3DFX >> + depends on I2C=y || I2C=FB_3DFX >> select FB_DDC >> default y >> help >> @@ -1669,6 +1679,7 @@ config FB_VT8623 >> config FB_TRIDENT >> tristate "Trident/CyberXXX/CyberBlade support" >> depends on FB && PCI >> + depends on I2C >> select FB_CFB_FILLRECT >> select FB_CFB_COPYAREA >> select FB_CFB_IMAGEBLIT >> @@ -2299,8 +2310,8 @@ endchoice >> >> config FB_MB862XX_I2C >> bool "Support I2C bus on MB862XX GDC" >> - depends on FB_MB862XX && I2C >> - depends on FB_MB862XX=m || I2C=y >> + depends on FB_MB862XX >> + depends on I2C=y || I2C=FB_MB862XX >> default y >> help >> Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 6962b4583fd7..892eb1863100 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -64,7 +64,6 @@ config FB_DDC tristate depends on FB select I2C_ALGOBIT - select I2C default n config FB_BOOT_VESA_SUPPORT @@ -390,6 +389,7 @@ config FB_CYBER2000 config FB_CYBER2000_DDC bool "DDC for CyberPro support" depends on FB_CYBER2000 + depends on I2C=y || I2C=FB_CYBER2000 select FB_DDC default y help @@ -634,7 +634,7 @@ config FB_BF537_LQ035 config FB_BFIN_7393 tristate "Blackfin ADV7393 Video encoder" depends on FB && BLACKFIN - select I2C + depends on I2C select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1026,6 +1026,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" depends on FB_NVIDIA + depends on I2C=y || I2C=FB_NVIDIA select FB_DDC help This enables I2C support for nVidia Chipsets. This is used @@ -1073,6 +1074,7 @@ config FB_RIVA config FB_RIVA_I2C bool "Enable DDC Support" depends on FB_RIVA + depends on I2C=y || I2C=FB_RIVA select FB_DDC help This enables I2C support for nVidia Chipsets. This is used @@ -1102,6 +1104,7 @@ config FB_RIVA_BACKLIGHT config FB_I740 tristate "Intel740 support" depends on FB && PCI + depends on I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1155,6 +1158,7 @@ config FB_I810_GTF config FB_I810_I2C bool "Enable DDC Support" depends on FB_I810 && FB_I810_GTF + depends on I2C=y || I2C=FB_I810 select FB_DDC help @@ -1206,6 +1210,7 @@ config FB_INTEL_DEBUG config FB_INTEL_I2C bool "DDC/I2C for Intel framebuffer support" depends on FB_INTEL + depends on I2C=y || I2C=FB_INTEL select FB_DDC default y help @@ -1285,6 +1290,7 @@ config FB_MATROX_G config FB_MATROX_I2C tristate "Matrox I2C support" depends on FB_MATROX + depends on I2C select FB_DDC ---help--- This drivers creates I2C buses which are needed for accessing the @@ -1350,6 +1356,7 @@ config FB_RADEON config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON + depends on I2C=y || I2C=FB_RADEON select FB_DDC default y help @@ -1460,6 +1467,7 @@ config FB_S3 config FB_S3_DDC bool "DDC for S3 support" depends on FB_S3 + depends on I2C=y || I2C=FB_S3 select FB_DDC default y help @@ -1485,6 +1493,7 @@ config FB_SAVAGE config FB_SAVAGE_I2C bool "Enable DDC2 Support" depends on FB_SAVAGE + depends on I2C=y || I2C=FB_SAVAGE select FB_DDC help This enables I2C support for S3 Savage Chipsets. This is used @@ -1629,6 +1638,7 @@ config FB_3DFX_ACCEL config FB_3DFX_I2C bool "Enable DDC/I2C support" depends on FB_3DFX + depends on I2C=y || I2C=FB_3DFX select FB_DDC default y help @@ -1669,6 +1679,7 @@ config FB_VT8623 config FB_TRIDENT tristate "Trident/CyberXXX/CyberBlade support" depends on FB && PCI + depends on I2C select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -2299,8 +2310,8 @@ endchoice config FB_MB862XX_I2C bool "Support I2C bus on MB862XX GDC" - depends on FB_MB862XX && I2C - depends on FB_MB862XX=m || I2C=y + depends on FB_MB862XX + depends on I2C=y || I2C=FB_MB862XX default y help Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
Using a Kconfig 'select' statement for a user-visible symbol that other drivers depend on often causes circular dependencies. A new one showed up when I wanted to add an NVMEM dependency to the DRM_MSM driver: drivers/i2c/Kconfig:7:error: recursive dependency detected! drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC drivers/video/fbdev/Kconfig:63: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/fbdev/Kconfig:390: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/fbdev/Kconfig:378: symbol FB_CYBER2000 depends on FB drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER drivers/gpu/drm/Kconfig:77: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER drivers/gpu/drm/Kconfig:71: symbol DRM_KMS_HELPER is selected by DRM_MSM drivers/gpu/drm/msm/Kconfig:2: symbol DRM_MSM depends on NVMEM drivers/nvmem/Kconfig:1: symbol NVMEM is selected by EEPROM_AT24 drivers/misc/eeprom/Kconfig:3: symbol EEPROM_AT24 depends on I2C Here, the problem is that many fbdev drivers have an i2c based interface and just 'select i2c' for that, while we also select the framebuffer subsystem indirectly from a DRM driver that now depends on i2c. This does away with the 'select' statement and instead uses 'depends on', like almost all I2C users. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/video/fbdev/Kconfig | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)