diff mbox series

[v3] video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host

Message ID 20190827110755.2707-1-weh@microsoft.com (mailing list archive)
State New, archived
Headers show
Series [v3] video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host | expand

Commit Message

Wei Hu Aug. 27, 2019, 11:08 a.m. UTC
Beginning from Windows 10 RS5+, VM screen resolution is obtained from host.
The "video=hyperv_fb" boot time option is not needed, but still can be
used to overwrite what the host specifies. The VM resolution on the host
could be set by executing the powershell "set-vmvideo" command.

v2:
- Implemented fallback when version negotiation failed.
- Defined full size for supported_resolution array.

v3:
- Corrected the synthvid major and minor version comparison problem.

Signed-off-by: Iouri Tarassov <iourit@microsoft.com>
Signed-off-by: Wei Hu <weh@microsoft.com>
---
 drivers/video/fbdev/hyperv_fb.c | 159 +++++++++++++++++++++++++++++---
 1 file changed, 147 insertions(+), 12 deletions(-)

Comments

Michael Kelley (LINUX) Aug. 27, 2019, 11:56 p.m. UTC | #1
From: Wei Hu <weh@microsoft.com> Sent: Tuesday, August 27, 2019 4:09 AM
> 
> Beginning from Windows 10 RS5+, VM screen resolution is obtained from host.
> The "video=hyperv_fb" boot time option is not needed, but still can be
> used to overwrite what the host specifies. The VM resolution on the host
> could be set by executing the powershell "set-vmvideo" command.
> 
> v2:
> - Implemented fallback when version negotiation failed.
> - Defined full size for supported_resolution array.
> 
> v3:
> - Corrected the synthvid major and minor version comparison problem.

The changelog for v2 and v3 should actually go after the "---" below so
that the changelog does not end up as part of the commit message.  Take
a look at other postings to LKML for an example.

> 
> Signed-off-by: Iouri Tarassov <iourit@microsoft.com>
> Signed-off-by: Wei Hu <weh@microsoft.com>
> ---
>  drivers/video/fbdev/hyperv_fb.c | 159 +++++++++++++++++++++++++++++---
>  1 file changed, 147 insertions(+), 12 deletions(-)
> 
> 
> +/* Check if the ver1 version is equal or greater than ver2 */
> +static inline bool synthvid_ver_eg(u32 ver1, u32 ver2)

I'm being picky here, but I would call this synthvid_ver_ge().   In my
experience "ge" is the shorthand for "greater than or equal", rather
than the "eg" you have used.

Michael


> +{
> +	if (SYNTHVID_VER_GET_MAJOR(ver1) > SYNTHVID_VER_GET_MAJOR(ver2) ||
> +	    (SYNTHVID_VER_GET_MAJOR(ver1) == SYNTHVID_VER_GET_MAJOR(ver2) &&
> +	     SYNTHVID_VER_GET_MINOR(ver1) >= SYNTHVID_VER_GET_MINOR(ver2)))
> +		return true;
> +
> +	return false;
> +}
Wei Hu Aug. 28, 2019, 8:45 a.m. UTC | #2
> -----Original Message-----
> From: Michael Kelley <mikelley@microsoft.com>
> >
> > Beginning from Windows 10 RS5+, VM screen resolution is obtained from host.
> > The "video=hyperv_fb" boot time option is not needed, but still can be
> > used to overwrite what the host specifies. The VM resolution on the host
> > could be set by executing the powershell "set-vmvideo" command.
> >
> > v2:
> > - Implemented fallback when version negotiation failed.
> > - Defined full size for supported_resolution array.
> >
> > v3:
> > - Corrected the synthvid major and minor version comparison problem.
> 
> The changelog for v2 and v3 should actually go after the "---" below so
> that the changelog does not end up as part of the commit message.  Take
> a look at other postings to LKML for an example.
> 
[Wei Hu] 
I saw people putting v2 and vN in commit message. The git log of this file also 
contains similar lines like v2. But if you prefer I can move it after ---. 


> >
> > Signed-off-by: Iouri Tarassov <iourit@microsoft.com>
> > Signed-off-by: Wei Hu <weh@microsoft.com>
> > ---
> >  drivers/video/fbdev/hyperv_fb.c | 159 +++++++++++++++++++++++++++++---
> >  1 file changed, 147 insertions(+), 12 deletions(-)
> >
> >
> > +/* Check if the ver1 version is equal or greater than ver2 */
> > +static inline bool synthvid_ver_eg(u32 ver1, u32 ver2)
> 
> I'm being picky here, but I would call this synthvid_ver_ge().   In my
> experience "ge" is the shorthand for "greater than or equal", rather
> than the "eg" you have used.
> 
[Wei Hu] 
Okay.

Thanks,
Wei


> Michael
>
diff mbox series

Patch

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 00f5bdcc6c6f..1464c6f14687 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -23,6 +23,14 @@ 
  *
  * Portrait orientation is also supported:
  *     For example: video=hyperv_fb:864x1152
+ *
+ * When a Windows 10 RS5+ host is used, the virtual machine screen
+ * resolution is obtained from the host. The "video=hyperv_fb" option is
+ * not needed, but still can be used to overwrite what the host specifies.
+ * The VM resolution on the host could be set by executing the powershell
+ * "set-vmvideo" command. For example
+ *     set-vmvideo -vmname name -horizontalresolution:1920 \
+ * -verticalresolution:1200 -resolutiontype single
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -44,6 +52,10 @@ 
 #define SYNTHVID_VERSION(major, minor) ((minor) << 16 | (major))
 #define SYNTHVID_VERSION_WIN7 SYNTHVID_VERSION(3, 0)
 #define SYNTHVID_VERSION_WIN8 SYNTHVID_VERSION(3, 2)
+#define SYNTHVID_VERSION_WIN10 SYNTHVID_VERSION(3, 5)
+
+#define SYNTHVID_VER_GET_MAJOR(ver) (ver & 0x0000ffff)
+#define SYNTHVID_VER_GET_MINOR(ver) ((ver & 0xffff0000) >> 16)
 
 #define SYNTHVID_DEPTH_WIN7 16
 #define SYNTHVID_DEPTH_WIN8 32
@@ -82,16 +94,25 @@  enum synthvid_msg_type {
 	SYNTHVID_POINTER_SHAPE		= 8,
 	SYNTHVID_FEATURE_CHANGE		= 9,
 	SYNTHVID_DIRT			= 10,
+	SYNTHVID_RESOLUTION_REQUEST	= 13,
+	SYNTHVID_RESOLUTION_RESPONSE	= 14,
 
-	SYNTHVID_MAX			= 11
+	SYNTHVID_MAX			= 15
 };
 
+#define		SYNTHVID_EDID_BLOCK_SIZE	128
+#define		SYNTHVID_MAX_RESOLUTION_COUNT	64
+
+struct hvd_screen_info {
+	u16 width;
+	u16 height;
+} __packed;
+
 struct synthvid_msg_hdr {
 	u32 type;
 	u32 size;  /* size of this header + payload after this field*/
 } __packed;
 
-
 struct synthvid_version_req {
 	u32 version;
 } __packed;
@@ -102,6 +123,19 @@  struct synthvid_version_resp {
 	u8 max_video_outputs;
 } __packed;
 
+struct synthvid_supported_resolution_req {
+	u8 maximum_resolution_count;
+} __packed;
+
+struct synthvid_supported_resolution_resp {
+	u8 edid_block[SYNTHVID_EDID_BLOCK_SIZE];
+	u8 resolution_count;
+	u8 default_resolution_index;
+	u8 is_standard;
+	struct hvd_screen_info
+		supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT];
+} __packed;
+
 struct synthvid_vram_location {
 	u64 user_ctx;
 	u8 is_vram_gpa_specified;
@@ -187,6 +221,8 @@  struct synthvid_msg {
 		struct synthvid_pointer_shape ptr_shape;
 		struct synthvid_feature_change feature_chg;
 		struct synthvid_dirt dirt;
+		struct synthvid_supported_resolution_req resolution_req;
+		struct synthvid_supported_resolution_resp resolution_resp;
 	};
 } __packed;
 
@@ -224,6 +260,8 @@  struct hvfb_par {
 
 static uint screen_width = HVFB_WIDTH;
 static uint screen_height = HVFB_HEIGHT;
+static uint screen_width_max = HVFB_WIDTH;
+static uint screen_height_max = HVFB_HEIGHT;
 static uint screen_depth;
 static uint screen_fb_size;
 
@@ -354,6 +392,7 @@  static void synthvid_recv_sub(struct hv_device *hdev)
 
 	/* Complete the wait event */
 	if (msg->vid_hdr.type == SYNTHVID_VERSION_RESPONSE ||
+	    msg->vid_hdr.type == SYNTHVID_RESOLUTION_RESPONSE ||
 	    msg->vid_hdr.type == SYNTHVID_VRAM_LOCATION_ACK) {
 		memcpy(par->init_buf, msg, MAX_VMBUS_PKT_SIZE);
 		complete(&par->wait);
@@ -400,6 +439,17 @@  static void synthvid_receive(void *ctx)
 	} while (bytes_recvd > 0 && ret == 0);
 }
 
+/* Check if the ver1 version is equal or greater than ver2 */
+static inline bool synthvid_ver_eg(u32 ver1, u32 ver2)
+{
+	if (SYNTHVID_VER_GET_MAJOR(ver1) > SYNTHVID_VER_GET_MAJOR(ver2) ||
+	    (SYNTHVID_VER_GET_MAJOR(ver1) == SYNTHVID_VER_GET_MAJOR(ver2) &&
+	     SYNTHVID_VER_GET_MINOR(ver1) >= SYNTHVID_VER_GET_MINOR(ver2)))
+		return true;
+
+	return false;
+}
+
 /* Check synthetic video protocol version with the host */
 static int synthvid_negotiate_ver(struct hv_device *hdev, u32 ver)
 {
@@ -428,6 +478,64 @@  static int synthvid_negotiate_ver(struct hv_device *hdev, u32 ver)
 	}
 
 	par->synthvid_version = ver;
+	pr_info("Synthvid Version major %d, minor %d\n",
+		SYNTHVID_VER_GET_MAJOR(ver), SYNTHVID_VER_GET_MINOR(ver));
+
+out:
+	return ret;
+}
+
+/* Get current resolution from the host */
+static int synthvid_get_supported_resolution(struct hv_device *hdev)
+{
+	struct fb_info *info = hv_get_drvdata(hdev);
+	struct hvfb_par *par = info->par;
+	struct synthvid_msg *msg = (struct synthvid_msg *)par->init_buf;
+	int ret = 0;
+	unsigned long t;
+	u8 index;
+	int i;
+
+	memset(msg, 0, sizeof(struct synthvid_msg));
+	msg->vid_hdr.type = SYNTHVID_RESOLUTION_REQUEST;
+	msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
+		sizeof(struct synthvid_supported_resolution_req);
+
+	msg->resolution_req.maximum_resolution_count =
+		SYNTHVID_MAX_RESOLUTION_COUNT;
+	synthvid_send(hdev, msg);
+
+	t = wait_for_completion_timeout(&par->wait, VSP_TIMEOUT);
+	if (!t) {
+		pr_err("Time out on waiting resolution response\n");
+			ret = -ETIMEDOUT;
+			goto out;
+	}
+
+	if (msg->resolution_resp.resolution_count == 0) {
+		pr_err("No supported resolutions\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	index = msg->resolution_resp.default_resolution_index;
+	if (index >= msg->resolution_resp.resolution_count) {
+		pr_err("Invalid resolution index: %d\n", index);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	for (i = 0; i < msg->resolution_resp.resolution_count; i++) {
+		screen_width_max = max_t(unsigned int, screen_width_max,
+		    msg->resolution_resp.supported_resolution[i].width);
+		screen_height_max = max_t(unsigned int, screen_height_max,
+		    msg->resolution_resp.supported_resolution[i].height);
+	}
+
+	screen_width =
+		msg->resolution_resp.supported_resolution[index].width;
+	screen_height =
+		msg->resolution_resp.supported_resolution[index].height;
 
 out:
 	return ret;
@@ -448,11 +556,27 @@  static int synthvid_connect_vsp(struct hv_device *hdev)
 	}
 
 	/* Negotiate the protocol version with host */
-	if (vmbus_proto_version == VERSION_WS2008 ||
-	    vmbus_proto_version == VERSION_WIN7)
-		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN7);
-	else
+	switch (vmbus_proto_version) {
+	case VERSION_WIN10:
+	case VERSION_WIN10_V5:
+		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN10);
+		if (!ret)
+			break;
+		/* Fallthrough */
+	case VERSION_WIN8:
+	case VERSION_WIN8_1:
 		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN8);
+		if (!ret)
+			break;
+		/* Fallthrough */
+	case VERSION_WS2008:
+	case VERSION_WIN7:
+		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN7);
+		break;
+	default:
+		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN10);
+		break;
+	}
 
 	if (ret) {
 		pr_err("Synthetic video device version not accepted\n");
@@ -464,6 +588,12 @@  static int synthvid_connect_vsp(struct hv_device *hdev)
 	else
 		screen_depth = SYNTHVID_DEPTH_WIN8;
 
+	if (synthvid_ver_eg(par->synthvid_version, SYNTHVID_VERSION_WIN10)) {
+		ret = synthvid_get_supported_resolution(hdev);
+		if (ret)
+			pr_info("Failed to get supported resolution from host, use default\n");
+	}
+
 	screen_fb_size = hdev->channel->offermsg.offer.
 				mmio_megabytes * 1024 * 1024;
 
@@ -653,6 +783,8 @@  static void hvfb_get_option(struct fb_info *info)
 	}
 
 	if (x < HVFB_WIDTH_MIN || y < HVFB_HEIGHT_MIN ||
+	    (synthvid_ver_eg(par->synthvid_version, SYNTHVID_VERSION_WIN10) &&
+	    (x > screen_width_max || y > screen_height_max)) ||
 	    (par->synthvid_version == SYNTHVID_VERSION_WIN8 &&
 	     x * y * screen_depth / 8 > SYNTHVID_FB_SIZE_WIN8) ||
 	    (par->synthvid_version == SYNTHVID_VERSION_WIN7 &&
@@ -689,8 +821,12 @@  static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 		}
 
 		if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
-		    pci_resource_len(pdev, 0) < screen_fb_size)
+		    pci_resource_len(pdev, 0) < screen_fb_size) {
+			pr_err("Resource not available or (0x%lx < 0x%lx)\n",
+			       (unsigned long) pci_resource_len(pdev, 0),
+			       (unsigned long) screen_fb_size);
 			goto err1;
+		}
 
 		pot_end = pci_resource_end(pdev, 0);
 		pot_start = pot_end - screen_fb_size + 1;
@@ -781,17 +917,16 @@  static int hvfb_probe(struct hv_device *hdev,
 		goto error1;
 	}
 
+	hvfb_get_option(info);
+	pr_info("Screen resolution: %dx%d, Color depth: %d\n",
+		screen_width, screen_height, screen_depth);
+
 	ret = hvfb_getmem(hdev, info);
 	if (ret) {
 		pr_err("No memory for framebuffer\n");
 		goto error2;
 	}
 
-	hvfb_get_option(info);
-	pr_info("Screen resolution: %dx%d, Color depth: %d\n",
-		screen_width, screen_height, screen_depth);
-
-
 	/* Set up fb_info */
 	info->flags = FBINFO_DEFAULT;