diff mbox series

efifb: Fix runtime pm calls for non PCI efifb device

Message ID 20210415102224.2764054-1-sudeep.holla@arm.com (mailing list archive)
State New
Headers show
Series efifb: Fix runtime pm calls for non PCI efifb device | expand

Commit Message

Sudeep Holla April 15, 2021, 10:22 a.m. UTC
Commit a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
added runtime pm calls to probe and remove routines to ensure the PCI
device for efifb stays in D0 state. However not ever efifb is based on
PCI device and efifb_pci_dev can be NULL if that is the case.

In such cases, we will get a boot splat like below due to NULL dereference:
-->8
 Console: switching to colour frame buffer device 240x67
 fb0: EFI VGA frame buffer device
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000270
 Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 [0000000000000270] user address but active_mm is swapper
 Internal error: Oops: 96000004 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc7-next-20210413 #1
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
 pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
 pc : pm_runtime_drop_link+0x12c/0x338
 lr : efifb_probe+0x7bc/0x7f0
 Call trace:
  pm_runtime_drop_link+0x12c/0x338
  efifb_probe+0x7bc/0x7f0
  platform_probe+0x68/0xd8
  really_probe+0xe4/0x3a8
  driver_probe_device+0x64/0xc8
  device_driver_attach+0x74/0x80
  __driver_attach+0x64/0xf0
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x1f8
  driver_register+0x64/0x120
  __platform_driver_register+0x28/0x38
  efifb_driver_init+0x1c/0x28
  do_one_initcall+0x48/0x2b0
  kernel_init_freeable+0x1e8/0x258
  kernel_init+0x14/0x118
  ret_from_fork+0x10/0x30
 Code: 88027c01 35ffffa2 17fff706 f9800051 (885f7c40)
 ---[ end trace 17d8da630bf8ff77 ]---
 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
-->8

Fix the issue by checking for non-NULL efifb_pci_dev before dereferencing
for runtime pm calls in probe and remove routines.

Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/video/fbdev/efifb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Sudeep Holla April 20, 2021, 7:53 a.m. UTC | #1
Gentle Ping! There is boot failure because of this issue with linux-next
on few arm platforms with non PCIe efifb. Please review and get the fix
merged ASAP so the testing on these platforms can continue with linux-next.

On Thu, Apr 15, 2021 at 11:22:24AM +0100, Sudeep Holla wrote:
> Commit a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
> added runtime pm calls to probe and remove routines to ensure the PCI
> device for efifb stays in D0 state. However not ever efifb is based on
> PCI device and efifb_pci_dev can be NULL if that is the case.
>
> In such cases, we will get a boot splat like below due to NULL dereference:
> -->8
>  Console: switching to colour frame buffer device 240x67
>  fb0: EFI VGA frame buffer device
>  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000270
>  Mem abort info:
>    ESR = 0x96000004
>    EC = 0x25: DABT (current EL), IL = 32 bits
>    SET = 0, FnV = 0
>    EA = 0, S1PTW = 0
>  Data abort info:
>    ISV = 0, ISS = 0x00000004
>    CM = 0, WnR = 0
>  [0000000000000270] user address but active_mm is swapper
>  Internal error: Oops: 96000004 [#1] PREEMPT SMP
>  Modules linked in:
>  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc7-next-20210413 #1
>  Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
>  pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
>  pc : pm_runtime_drop_link+0x12c/0x338
>  lr : efifb_probe+0x7bc/0x7f0
>  Call trace:
>   pm_runtime_drop_link+0x12c/0x338
>   efifb_probe+0x7bc/0x7f0
>   platform_probe+0x68/0xd8
>   really_probe+0xe4/0x3a8
>   driver_probe_device+0x64/0xc8
>   device_driver_attach+0x74/0x80
>   __driver_attach+0x64/0xf0
>   bus_for_each_dev+0x70/0xc0
>   driver_attach+0x24/0x30
>   bus_add_driver+0x150/0x1f8
>   driver_register+0x64/0x120
>   __platform_driver_register+0x28/0x38
>   efifb_driver_init+0x1c/0x28
>   do_one_initcall+0x48/0x2b0
>   kernel_init_freeable+0x1e8/0x258
>   kernel_init+0x14/0x118
>   ret_from_fork+0x10/0x30
>  Code: 88027c01 35ffffa2 17fff706 f9800051 (885f7c40)
>  ---[ end trace 17d8da630bf8ff77 ]---
>  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> -->8
>
> Fix the issue by checking for non-NULL efifb_pci_dev before dereferencing
> for runtime pm calls in probe and remove routines.
>
> Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: Peter Jones <pjones@redhat.com>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  drivers/video/fbdev/efifb.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
> index f58a545b3bf3..8ea8f079cde2 100644
> --- a/drivers/video/fbdev/efifb.c
> +++ b/drivers/video/fbdev/efifb.c
> @@ -575,7 +575,8 @@ static int efifb_probe(struct platform_device *dev)
>  		goto err_fb_dealoc;
>  	}
>  	fb_info(info, "%s frame buffer device\n", info->fix.id);
> -	pm_runtime_get_sync(&efifb_pci_dev->dev);
> +	if (efifb_pci_dev)
> +		pm_runtime_get_sync(&efifb_pci_dev->dev);
>  	return 0;
>
>  err_fb_dealoc:
> @@ -602,7 +603,8 @@ static int efifb_remove(struct platform_device *pdev)
>  	unregister_framebuffer(info);
>  	sysfs_remove_groups(&pdev->dev.kobj, efifb_groups);
>  	framebuffer_release(info);
> -	pm_runtime_put(&efifb_pci_dev->dev);
> +	if (efifb_pci_dev)
> +		pm_runtime_put(&efifb_pci_dev->dev);
>
>  	return 0;
>  }
> --
> 2.25.1
>

--
Regards,
Sudeep
Kai-Heng Feng April 20, 2021, 8:12 a.m. UTC | #2
Hi Sudeep,

On Tue, Apr 20, 2021 at 3:53 PM Sudeep Holla <sudeep.holla@arm.com> wrote:
>
> Gentle Ping! There is boot failure because of this issue with linux-next
> on few arm platforms with non PCIe efifb. Please review and get the fix
> merged ASAP so the testing on these platforms can continue with linux-next.

It was merged in drm-tip as d510c88cfbb2 ("efifb: Check efifb_pci_dev
before using it").

Kai-Heng

>
> On Thu, Apr 15, 2021 at 11:22:24AM +0100, Sudeep Holla wrote:
> > Commit a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
> > added runtime pm calls to probe and remove routines to ensure the PCI
> > device for efifb stays in D0 state. However not ever efifb is based on
> > PCI device and efifb_pci_dev can be NULL if that is the case.
> >
> > In such cases, we will get a boot splat like below due to NULL dereference:
> > -->8
> >  Console: switching to colour frame buffer device 240x67
> >  fb0: EFI VGA frame buffer device
> >  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000270
> >  Mem abort info:
> >    ESR = 0x96000004
> >    EC = 0x25: DABT (current EL), IL = 32 bits
> >    SET = 0, FnV = 0
> >    EA = 0, S1PTW = 0
> >  Data abort info:
> >    ISV = 0, ISS = 0x00000004
> >    CM = 0, WnR = 0
> >  [0000000000000270] user address but active_mm is swapper
> >  Internal error: Oops: 96000004 [#1] PREEMPT SMP
> >  Modules linked in:
> >  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc7-next-20210413 #1
> >  Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
> >  pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> >  pc : pm_runtime_drop_link+0x12c/0x338
> >  lr : efifb_probe+0x7bc/0x7f0
> >  Call trace:
> >   pm_runtime_drop_link+0x12c/0x338
> >   efifb_probe+0x7bc/0x7f0
> >   platform_probe+0x68/0xd8
> >   really_probe+0xe4/0x3a8
> >   driver_probe_device+0x64/0xc8
> >   device_driver_attach+0x74/0x80
> >   __driver_attach+0x64/0xf0
> >   bus_for_each_dev+0x70/0xc0
> >   driver_attach+0x24/0x30
> >   bus_add_driver+0x150/0x1f8
> >   driver_register+0x64/0x120
> >   __platform_driver_register+0x28/0x38
> >   efifb_driver_init+0x1c/0x28
> >   do_one_initcall+0x48/0x2b0
> >   kernel_init_freeable+0x1e8/0x258
> >   kernel_init+0x14/0x118
> >   ret_from_fork+0x10/0x30
> >  Code: 88027c01 35ffffa2 17fff706 f9800051 (885f7c40)
> >  ---[ end trace 17d8da630bf8ff77 ]---
> >  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> > -->8
> >
> > Fix the issue by checking for non-NULL efifb_pci_dev before dereferencing
> > for runtime pm calls in probe and remove routines.
> >
> > Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0")
> > Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > Cc: Alex Deucher <alexander.deucher@amd.com>
> > Cc: Thomas Zimmermann <tzimmermann@suse.de>
> > Cc: Peter Jones <pjones@redhat.com>
> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> > ---
> >  drivers/video/fbdev/efifb.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
> > index f58a545b3bf3..8ea8f079cde2 100644
> > --- a/drivers/video/fbdev/efifb.c
> > +++ b/drivers/video/fbdev/efifb.c
> > @@ -575,7 +575,8 @@ static int efifb_probe(struct platform_device *dev)
> >               goto err_fb_dealoc;
> >       }
> >       fb_info(info, "%s frame buffer device\n", info->fix.id);
> > -     pm_runtime_get_sync(&efifb_pci_dev->dev);
> > +     if (efifb_pci_dev)
> > +             pm_runtime_get_sync(&efifb_pci_dev->dev);
> >       return 0;
> >
> >  err_fb_dealoc:
> > @@ -602,7 +603,8 @@ static int efifb_remove(struct platform_device *pdev)
> >       unregister_framebuffer(info);
> >       sysfs_remove_groups(&pdev->dev.kobj, efifb_groups);
> >       framebuffer_release(info);
> > -     pm_runtime_put(&efifb_pci_dev->dev);
> > +     if (efifb_pci_dev)
> > +             pm_runtime_put(&efifb_pci_dev->dev);
> >
> >       return 0;
> >  }
> > --
> > 2.25.1
> >
>
> --
> Regards,
> Sudeep
Sudeep Holla April 20, 2021, 8:24 a.m. UTC | #3
On Tue, Apr 20, 2021 at 04:12:26PM +0800, Kai-Heng Feng wrote:
> Hi Sudeep,
>
> On Tue, Apr 20, 2021 at 3:53 PM Sudeep Holla <sudeep.holla@arm.com> wrote:
> >
> > Gentle Ping! There is boot failure because of this issue with linux-next
> > on few arm platforms with non PCIe efifb. Please review and get the fix
> > merged ASAP so the testing on these platforms can continue with linux-next.
>
> It was merged in drm-tip as d510c88cfbb2 ("efifb: Check efifb_pci_dev
> before using it").
>

Ah OK, thanks! But I don't think it is appear on -next yet.

--
Regards,
Sudeep
diff mbox series

Patch

diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index f58a545b3bf3..8ea8f079cde2 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -575,7 +575,8 @@  static int efifb_probe(struct platform_device *dev)
 		goto err_fb_dealoc;
 	}
 	fb_info(info, "%s frame buffer device\n", info->fix.id);
-	pm_runtime_get_sync(&efifb_pci_dev->dev);
+	if (efifb_pci_dev)
+		pm_runtime_get_sync(&efifb_pci_dev->dev);
 	return 0;
 
 err_fb_dealoc:
@@ -602,7 +603,8 @@  static int efifb_remove(struct platform_device *pdev)
 	unregister_framebuffer(info);
 	sysfs_remove_groups(&pdev->dev.kobj, efifb_groups);
 	framebuffer_release(info);
-	pm_runtime_put(&efifb_pci_dev->dev);
+	if (efifb_pci_dev)
+		pm_runtime_put(&efifb_pci_dev->dev);
 
 	return 0;
 }