diff mbox series

[v4,3/5] staging: fbtft: Add support for orientation on Himax HX8347d

Message ID 20210503172114.27891-4-andriy.shevchenko@linux.intel.com (mailing list archive)
State New
Headers show
Series staging: fbtft: Fixing GPIO handling issues | expand

Commit Message

Andy Shevchenko May 3, 2021, 5:21 p.m. UTC
Himax HX8347d has non-standard register to control orientation.
Add support for different orientation values.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/fb_hx8347d.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/fbtft/fb_hx8347d.c b/drivers/staging/fbtft/fb_hx8347d.c
index 37eaf0862c5b..a9b72a8b42b5 100644
--- a/drivers/staging/fbtft/fb_hx8347d.c
+++ b/drivers/staging/fbtft/fb_hx8347d.c
@@ -68,9 +68,6 @@  static int init_display(struct fbtft_par *par)
 	mdelay(40);
 	write_reg(par, 0x28, 0x3C);
 
-	/* orientation */
-	write_reg(par, 0x16, 0x60 | (par->bgr << 3));
-
 	return 0;
 }
 
@@ -87,6 +84,31 @@  static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 	write_reg(par, 0x22);
 }
 
+#define MEM_Y   BIT(7) /* MY row address order */
+#define MEM_X   BIT(6) /* MX column address order */
+#define MEM_V   BIT(5) /* MV row / column exchange */
+#define MEM_L   BIT(4) /* ML vertical refresh order */
+#define MEM_BGR (3) /* RGB-BGR Order */
+static int set_var(struct fbtft_par *par)
+{
+	switch (par->info->var.rotate) {
+	case 0:
+		write_reg(par, 0x16, MEM_V | MEM_X | (par->bgr << MEM_BGR));
+		break;
+	case 270:
+		write_reg(par, 0x16, par->bgr << MEM_BGR);
+		break;
+	case 180:
+		write_reg(par, 0x16, MEM_V | MEM_Y | (par->bgr << MEM_BGR));
+		break;
+	case 90:
+		write_reg(par, 0x16, MEM_X | MEM_Y | (par->bgr << MEM_BGR));
+		break;
+	}
+
+	return 0;
+}
+
 /*
  * Gamma string format:
  *   VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM
@@ -144,6 +166,7 @@  static struct fbtft_display display = {
 	.fbtftops = {
 		.init_display = init_display,
 		.set_addr_win = set_addr_win,
+		.set_var = set_var,
 		.set_gamma = set_gamma,
 	},
 };