diff mbox series

[v3,05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight

Message ID 20220623115631.22209-6-peterwu.pub@gmail.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Add Mediatek MT6370 PMIC support | expand

Commit Message

ChiaEn Wu June 23, 2022, 11:56 a.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

Add mt6370 backlight binding documentation.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---

v3
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
  "mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
  "bled-ocp-microamp" enum values
---
 .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml

Comments

Joe Simmons-Talbott June 23, 2022, 1:16 p.m. UTC | #1
On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Add mt6370 backlight binding documentation.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> 
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
>   "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
>   "bled-ocp-microamp" enum values
> ---
>  .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> new file mode 100644
> index 0000000..26563ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Backlight
> +
> +maintainers:
> +  - ChiaEn Wu <chiaen_wu@richtek.com>
> +
> +description: |
> +  This module is part of the MT6370 MFD device.
> +  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> +  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> +  capability with 2048 current steps (11 bits) in exponential or linear
> +  mapping curves.
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6370-backlight
> +
> +  default-brightness:
> +    minimum: 0
> +    maximum: 2048
> +
> +  max-brightness:
> +    minimum: 0
> +    maximum: 2048
> +
> +  enable-gpios:
> +    description: External backlight 'enable' pin
> +    maxItems: 1
> +
> +  mediatek,bled-pwm-enable:
> +    description: |
> +      Enable external PWM input for backlight dimming
> +    type: boolean
> +
> +  mediatek,bled-pwm-hys-enable:
> +    description: |
> +      Enable the backlight input-hysteresis for PWM mode
> +    type: boolean
> +
> +  mediatek,bled-pwm-hys-input-th-steps:
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    enum: [1, 4, 16, 64]
> +    description: |
> +      The selection of the upper and lower bounds threshold of backlight
> +      PWM resolution. If we choose selection 64, the variation of PWM
> +      resolution needs over than 64 steps.

more than?

Thanks,
Joe

> +
> +  mediatek,bled-ovp-shutdown:
> +    description: |
> +      Enable the backlight shutdown when OVP level triggered
> +    type: boolean
> +
> +  mediatek,bled-ovp-microvolt:
> +    enum: [17000000, 21000000, 25000000, 29000000]
> +    description: |
> +      Backlight OVP level selection.
> +
> +  mediatek,bled-ocp-shutdown:
> +    description: |
> +      Enable the backlight shutdown when OCP level triggerred.
> +    type: boolean
> +
> +  mediatek,bled-ocp-microamp:
> +    enum: [900000, 1200000, 1500000, 1800000]
> +    description: |
> +      Backlight OC level selection.
> +
> +  mediatek,bled-channel-use:
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    description: |
> +      Backlight LED channel to be used.
> +      Each bit mapping to:
> +        - 0: CH4
> +        - 1: CH3
> +        - 2: CH2
> +        - 3: CH1
> +    minimum: 1
> +    maximum: 15
> +
> +required:
> +  - compatible
> +  - mediatek,bled-channel-use
> +
> +additionalProperties: false
> -- 
> 2.7.4
>
ChiaEn Wu June 24, 2022, 9:34 a.m. UTC | #2
Hi Joe,

Joe Simmons-Talbott <joetalbott@gmail.com> 於 2022年6月23日 週四 晚上9:17寫道:
>
> On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > Add mt6370 backlight binding documentation.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > ---
> >
> > v3
> > - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
> >   "mediatek,bled-pwm-hys-input-th-steps"
> > - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
> >   "bled-ocp-microamp" enum values
> > ---
> >  .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
> >  1 file changed, 92 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> > new file mode 100644
> > index 0000000..26563ae
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> > @@ -0,0 +1,92 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek MT6370 Backlight
> > +
> > +maintainers:
> > +  - ChiaEn Wu <chiaen_wu@richtek.com>
> > +
> > +description: |
> > +  This module is part of the MT6370 MFD device.
> > +  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> > +  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> > +  capability with 2048 current steps (11 bits) in exponential or linear
> > +  mapping curves.
> > +
> > +allOf:
> > +  - $ref: common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt6370-backlight
> > +
> > +  default-brightness:
> > +    minimum: 0
> > +    maximum: 2048
> > +
> > +  max-brightness:
> > +    minimum: 0
> > +    maximum: 2048
> > +
> > +  enable-gpios:
> > +    description: External backlight 'enable' pin
> > +    maxItems: 1
> > +
> > +  mediatek,bled-pwm-enable:
> > +    description: |
> > +      Enable external PWM input for backlight dimming
> > +    type: boolean
> > +
> > +  mediatek,bled-pwm-hys-enable:
> > +    description: |
> > +      Enable the backlight input-hysteresis for PWM mode
> > +    type: boolean
> > +
> > +  mediatek,bled-pwm-hys-input-th-steps:
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    enum: [1, 4, 16, 64]
> > +    description: |
> > +      The selection of the upper and lower bounds threshold of backlight
> > +      PWM resolution. If we choose selection 64, the variation of PWM
> > +      resolution needs over than 64 steps.
>
> more than?
>
> Thanks,
> Joe
>

Thanks for your helpful comments!
I will revise this in the next patch. Thanks!

> > +
> > +  mediatek,bled-ovp-shutdown:
> > +    description: |
> > +      Enable the backlight shutdown when OVP level triggered
> > +    type: boolean
> > +
> > +  mediatek,bled-ovp-microvolt:
> > +    enum: [17000000, 21000000, 25000000, 29000000]
> > +    description: |
> > +      Backlight OVP level selection.
> > +
> > +  mediatek,bled-ocp-shutdown:
> > +    description: |
> > +      Enable the backlight shutdown when OCP level triggerred.
> > +    type: boolean
> > +
> > +  mediatek,bled-ocp-microamp:
> > +    enum: [900000, 1200000, 1500000, 1800000]
> > +    description: |
> > +      Backlight OC level selection.
> > +
> > +  mediatek,bled-channel-use:
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    description: |
> > +      Backlight LED channel to be used.
> > +      Each bit mapping to:
> > +        - 0: CH4
> > +        - 1: CH3
> > +        - 2: CH2
> > +        - 3: CH1
> > +    minimum: 1
> > +    maximum: 15
> > +
> > +required:
> > +  - compatible
> > +  - mediatek,bled-channel-use
> > +
> > +additionalProperties: false
> > --
> > 2.7.4
> >

Best regards,
ChiaEn Wu
Rob Herring (Arm) June 30, 2022, 9:55 p.m. UTC | #3
On Thu, 23 Jun 2022 19:56:22 +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Add mt6370 backlight binding documentation.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> 
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
>   "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
>   "bled-ocp-microamp" enum values
> ---
>  .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 0000000..26563ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,92 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt6370-backlight
+
+  default-brightness:
+    minimum: 0
+    maximum: 2048
+
+  max-brightness:
+    minimum: 0
+    maximum: 2048
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs over than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggerred.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false