diff mbox series

[v2,02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml

Message ID 20220727164646.387541-3-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: iio: use spi-peripheral-props.yaml | expand

Commit Message

Krzysztof Kozlowski July 27, 2022, 4:46 p.m. UTC
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

I wonder if spi-3wire is device specific (not controller) and should be
rather explicitly mentioned by device schema. Just like spi-cpol/cpha.
---
 .../devicetree/bindings/iio/accel/adi,adis16201.yaml     | 7 ++++---
 .../devicetree/bindings/iio/accel/adi,adis16240.yaml     | 7 ++++---
 .../devicetree/bindings/iio/accel/adi,adxl313.yaml       | 9 ++++-----
 .../devicetree/bindings/iio/accel/adi,adxl345.yaml       | 7 ++++---
 .../devicetree/bindings/iio/accel/adi,adxl355.yaml       | 7 ++++---
 .../devicetree/bindings/iio/accel/adi,adxl367.yaml       | 7 ++++---
 .../devicetree/bindings/iio/accel/adi,adxl372.yaml       | 7 ++++---
 .../devicetree/bindings/iio/accel/bosch,bma220.yaml      | 7 ++++---
 .../devicetree/bindings/iio/accel/bosch,bma255.yaml      | 5 ++++-
 .../devicetree/bindings/iio/accel/bosch,bmi088.yaml      | 7 ++++---
 .../devicetree/bindings/iio/accel/fsl,mma7455.yaml       | 7 ++++---
 .../devicetree/bindings/iio/accel/kionix,kxsd9.yaml      | 7 ++++---
 .../devicetree/bindings/iio/accel/murata,sca3300.yaml    | 5 ++++-
 .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml    | 7 ++++---
 14 files changed, 56 insertions(+), 40 deletions(-)

Comments

Jonathan Cameron July 31, 2022, 3:49 p.m. UTC | #1
On Wed, 27 Jul 2022 18:46:38 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> Instead of listing directly properties typical for SPI peripherals,
> reference the spi-peripheral-props.yaml schema.  This allows using all
> properties typical for SPI-connected devices, even these which device
> bindings author did not tried yet.
> 
> Remove the spi-* properties which now come via spi-peripheral-props.yaml
> schema, except for the cases when device schema adds some constraints
> like maximum frequency.
> 
> While changing additionalProperties->unevaluatedProperties, put it in
> typical place, just before example DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> I wonder if spi-3wire is device specific (not controller) and should be
> rather explicitly mentioned by device schema. Just like spi-cpol/cpha.

I think it is, but Mark is expert on this.
In general I'm waiting on Mark's opinion on the whole idea!

Thanks,

Jonathan

> ---
>  .../devicetree/bindings/iio/accel/adi,adis16201.yaml     | 7 ++++---
>  .../devicetree/bindings/iio/accel/adi,adis16240.yaml     | 7 ++++---
>  .../devicetree/bindings/iio/accel/adi,adxl313.yaml       | 9 ++++-----
>  .../devicetree/bindings/iio/accel/adi,adxl345.yaml       | 7 ++++---
>  .../devicetree/bindings/iio/accel/adi,adxl355.yaml       | 7 ++++---
>  .../devicetree/bindings/iio/accel/adi,adxl367.yaml       | 7 ++++---
>  .../devicetree/bindings/iio/accel/adi,adxl372.yaml       | 7 ++++---
>  .../devicetree/bindings/iio/accel/bosch,bma220.yaml      | 7 ++++---
>  .../devicetree/bindings/iio/accel/bosch,bma255.yaml      | 5 ++++-
>  .../devicetree/bindings/iio/accel/bosch,bmi088.yaml      | 7 ++++---
>  .../devicetree/bindings/iio/accel/fsl,mma7455.yaml       | 7 ++++---
>  .../devicetree/bindings/iio/accel/kionix,kxsd9.yaml      | 7 ++++---
>  .../devicetree/bindings/iio/accel/murata,sca3300.yaml    | 5 ++++-
>  .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml    | 7 ++++---
>  14 files changed, 56 insertions(+), 40 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
> index 6f8f8a6258fe..7332442e5661 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
> @@ -27,15 +27,16 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>    vdd-supply: true
>  
>  required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> index 8d829ef878bc..f6f97164c2ca 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
> @@ -25,14 +25,15 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>  required:
>    - compatible
>    - reg
>    - interrupts
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> index d6afc1b8c272..7c1bc7810528 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> @@ -22,10 +22,6 @@ properties:
>    reg:
>      maxItems: 1
>  
> -  spi-3wire: true
> -
> -  spi-max-frequency: true
> -
>    vs-supply:
>      description: Regulator that supplies power to the accelerometer
>  
> @@ -48,7 +44,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index 9bb039e2f533..346abfb13a3a 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -32,8 +32,6 @@ properties:
>  
>    spi-cpol: true
>  
> -  spi-max-frequency: true
> -
>    interrupts:
>      maxItems: 1
>  
> @@ -42,7 +40,10 @@ required:
>    - reg
>    - interrupts
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> index ba54d6998f2e..14b487088ab4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> @@ -45,13 +45,14 @@ properties:
>    vddio-supply:
>      description: Regulator that provides power to the bus
>  
> -  spi-max-frequency: true
> -
>  required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> index d259e796c1d6..f10d98d34cb8 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> @@ -35,8 +35,6 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>    vdd-supply: true
>    vddio-supply: true
>  
> @@ -45,7 +43,10 @@ required:
>    - reg
>    - interrupts
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> index 38b59b6454ce..73a5c8f814cc 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> @@ -25,14 +25,15 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>  required:
>    - compatible
>    - reg
>    - interrupts
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
> index 942b23ad0712..5dd06f5905b4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
> @@ -20,8 +20,6 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>    vdda-supply: true
>    vddd-supply: true
>    vddio-supply: true
> @@ -30,7 +28,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> index 478e75ae0885..457a709b583c 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> @@ -72,7 +72,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> index 272eb48eef5a..3cb82576d758 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -24,8 +24,6 @@ properties:
>    reg:
>      maxItems: 1
>  
> -  spi-max-frequency: true
> -
>    vdd-supply: true
>  
>    vddio-supply: true
> @@ -50,7 +48,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
> index 7c8f8bdc2333..589ca8178f4a 100644
> --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
> @@ -40,13 +40,14 @@ properties:
>          - "INT1"
>          - "INT2"
>  
> -  spi-max-frequency: true
> -
>  required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
> index 390b87242fcb..f64d99b35492 100644
> --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
> @@ -29,13 +29,14 @@ properties:
>    mount-matrix:
>      description: an optional 3x3 mounting rotation matrix.
>  
> -  spi-max-frequency: true
> -
>  required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
> index f6e2a16a710b..00c990caa1e4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
> @@ -29,7 +29,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> index ad529ab2c6e2..65ce8ea14b52 100644
> --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> @@ -27,8 +27,6 @@ properties:
>    vdd-supply:
>      description: phandle to the regulator that provides power to the accelerometer
>  
> -  spi-max-frequency: true
> -
>    interrupts:
>      maxItems: 1
>  
> @@ -44,7 +42,10 @@ required:
>    - compatible
>    - reg
>  
> -additionalProperties: false
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
>  
>  examples:
>    - |
Rob Herring (Arm) Aug. 3, 2022, 9:29 p.m. UTC | #2
On Sun, Jul 31, 2022 at 04:49:43PM +0100, Jonathan Cameron wrote:
> On Wed, 27 Jul 2022 18:46:38 +0200
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
> > Instead of listing directly properties typical for SPI peripherals,
> > reference the spi-peripheral-props.yaml schema.  This allows using all
> > properties typical for SPI-connected devices, even these which device
> > bindings author did not tried yet.
> > 
> > Remove the spi-* properties which now come via spi-peripheral-props.yaml
> > schema, except for the cases when device schema adds some constraints
> > like maximum frequency.
> > 
> > While changing additionalProperties->unevaluatedProperties, put it in
> > typical place, just before example DTS.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > 
> > ---
> > 
> > I wonder if spi-3wire is device specific (not controller) and should be
> > rather explicitly mentioned by device schema. Just like spi-cpol/cpha.
> 
> I think it is, but Mark is expert on this.

I would say yes as it's the device with a single data line.

> In general I'm waiting on Mark's opinion on the whole idea!

The prerequisite changes (except for spi-3-wire) are already queued up 
by Mark as are changes for other subsystems.

Rob
Krzysztof Kozlowski Aug. 4, 2022, 7:27 a.m. UTC | #3
On 03/08/2022 23:29, Rob Herring wrote:
>>> I wonder if spi-3wire is device specific (not controller) and should be
>>> rather explicitly mentioned by device schema. Just like spi-cpol/cpha.
>>
>> I think it is, but Mark is expert on this.
> 
> I would say yes as it's the device with a single data line.

I will move it to device schema, just like cpol/cpha, and send a v3.
After the merge window.

> 
>> In general I'm waiting on Mark's opinion on the whole idea!
> 
> The prerequisite changes (except for spi-3-wire) are already queued up 
> by Mark as are changes for other subsystems.


Best regards,
Krzysztof
Jonathan Cameron Aug. 6, 2022, 5:31 p.m. UTC | #4
On Thu, 4 Aug 2022 09:27:37 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 03/08/2022 23:29, Rob Herring wrote:
> >>> I wonder if spi-3wire is device specific (not controller) and should be
> >>> rather explicitly mentioned by device schema. Just like spi-cpol/cpha.  
> >>
> >> I think it is, but Mark is expert on this.  
> > 
> > I would say yes as it's the device with a single data line.  
> 
> I will move it to device schema, just like cpol/cpha, and send a v3.
> After the merge window.
Works for me. I'll wait for v3 then.



> 
> >   
> >> In general I'm waiting on Mark's opinion on the whole idea!  
> > 
> > The prerequisite changes (except for spi-3-wire) are already queued up 
> > by Mark as are changes for other subsystems.  

Ah. Got it.

Thanks for driving this through.

Jonathan
> 
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..7332442e5661 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,15 +27,16 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 8d829ef878bc..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,14 +25,15 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..7c1bc7810528 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -22,10 +22,6 @@  properties:
   reg:
     maxItems: 1
 
-  spi-3wire: true
-
-  spi-max-frequency: true
-
   vs-supply:
     description: Regulator that supplies power to the accelerometer
 
@@ -48,7 +44,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 9bb039e2f533..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@  properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -42,7 +40,10 @@  required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..14b487088ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -45,13 +45,14 @@  properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
index d259e796c1d6..f10d98d34cb8 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -35,8 +35,6 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
@@ -45,7 +43,10 @@  required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,14 +25,15 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..5dd06f5905b4 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@  properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
   vddd-supply: true
   vddio-supply: true
@@ -30,7 +28,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 272eb48eef5a..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -24,8 +24,6 @@  properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
   vddio-supply: true
@@ -50,7 +48,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 7c8f8bdc2333..589ca8178f4a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -40,13 +40,14 @@  properties:
         - "INT1"
         - "INT2"
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@  properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index f6e2a16a710b..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -29,7 +29,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..65ce8ea14b52 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@  properties:
   vdd-supply:
     description: phandle to the regulator that provides power to the accelerometer
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -44,7 +42,10 @@  required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |