diff mbox series

[2/2] dt-bindings: backlight: document new property default-brightness-level

Message ID 20230519200520.10657-2-alex@shruggie.ro (mailing list archive)
State Handled Elsewhere
Headers show
Series [1/2] backlight: gpio_backlight: add new property default-brightness-level | expand

Commit Message

Alexandru Ardelean May 19, 2023, 8:05 p.m. UTC
From: Yannick Fertre <yannick.fertre@foss.st.com>

Add documentation for new default-brightness-level property.

Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
---

Link to original patch:
  https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98

 .../bindings/leds/backlight/gpio-backlight.yaml          | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Daniel Thompson May 26, 2023, 10:20 a.m. UTC | #1
On Fri, May 19, 2023 at 11:05:20PM +0300, Alexandru Ardelean wrote:
> From: Yannick Fertre <yannick.fertre@foss.st.com>
>
> Add documentation for new default-brightness-level property.
>
> Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com>
> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
> Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
> ---
>
> Link to original patch:
>   https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98
>
>  .../bindings/leds/backlight/gpio-backlight.yaml          | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> index 584030b6b0b9..b96c08cff0f0 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> @@ -23,6 +23,15 @@ properties:
>      description: enable the backlight at boot.
>      type: boolean
>
> +  default-brightness-level:
> +    description:
> +      The default brightness level (index into the array defined by the
> +      "brightness-levels" property).

gpio-backlight does not have a brightness-levels array property!

I think it is also necessary to improve the docs of both properties to
distinguish between the meaning of default-on and
default-brightness-level. The result of setting default-on and
default-brightness level to zero is that the GPIO will be off (this is
correct behaviour but hard to figure out from the current text).

default-on is a control that can "enable" the backlight at boot when it
is not linked to a display in the DT (e.g. it is mostly for legacy
cases). When the backlight is linked to a display then the backlight
enable state will be automatically linked to the display enable state
instead.

default-brightness-level is useful for handling displays that
are still readable with the backlight off (e-ink, reflective/
transflexive LCD, etc), otherwise is should be absent or set to 1.


> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +dependencies:
> +  default-brightness-level: [ "brightness-levels" ]

As above, depending on brightness-levels doesn't make any sense here.


Daniel.
Philippe CORNU May 26, 2023, 12:05 p.m. UTC | #2
On 5/19/23 22:05, Alexandru Ardelean wrote:
> From: Yannick Fertre <yannick.fertre@foss.st.com>
> 
> Add documentation for new default-brightness-level property.
> 
> Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com>

Hi Alexandru,
same comments as for the 1/2 patch.
Many thanks
Philippe :-)

> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
> Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
> ---
> 
> Link to original patch:
>    https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98
> 
>   .../bindings/leds/backlight/gpio-backlight.yaml          | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> index 584030b6b0b9..b96c08cff0f0 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> @@ -23,6 +23,15 @@ properties:
>       description: enable the backlight at boot.
>       type: boolean
>   
> +  default-brightness-level:
> +    description:
> +      The default brightness level (index into the array defined by the
> +      "brightness-levels" property).
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +dependencies:
> +  default-brightness-level: [ "brightness-levels" ]
> +
>   required:
>     - compatible
>     - gpios
Alexandru Ardelean May 29, 2023, 7:03 a.m. UTC | #3
On Fri, May 26, 2023 at 1:20 PM Daniel Thompson
<daniel.thompson@linaro.org> wrote:
>
> On Fri, May 19, 2023 at 11:05:20PM +0300, Alexandru Ardelean wrote:
> > From: Yannick Fertre <yannick.fertre@foss.st.com>
> >
> > Add documentation for new default-brightness-level property.
> >
> > Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com>
> > Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
> > Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
> > ---
> >
> > Link to original patch:
> >   https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98
> >
> >  .../bindings/leds/backlight/gpio-backlight.yaml          | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > index 584030b6b0b9..b96c08cff0f0 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > @@ -23,6 +23,15 @@ properties:
> >      description: enable the backlight at boot.
> >      type: boolean
> >
> > +  default-brightness-level:
> > +    description:
> > +      The default brightness level (index into the array defined by the
> > +      "brightness-levels" property).
>
> gpio-backlight does not have a brightness-levels array property!
>
> I think it is also necessary to improve the docs of both properties to
> distinguish between the meaning of default-on and
> default-brightness-level. The result of setting default-on and
> default-brightness level to zero is that the GPIO will be off (this is
> correct behaviour but hard to figure out from the current text).
>
> default-on is a control that can "enable" the backlight at boot when it
> is not linked to a display in the DT (e.g. it is mostly for legacy
> cases). When the backlight is linked to a display then the backlight
> enable state will be automatically linked to the display enable state
> instead.
>
> default-brightness-level is useful for handling displays that
> are still readable with the backlight off (e-ink, reflective/
> transflexive LCD, etc), otherwise is should be absent or set to 1.

ack
will do in V2

thanks

>
>
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +dependencies:
> > +  default-brightness-level: [ "brightness-levels" ]
>
> As above, depending on brightness-levels doesn't make any sense here.
>
>
> Daniel.
Alexandru Ardelean May 29, 2023, 7:03 a.m. UTC | #4
On Fri, May 26, 2023 at 3:05 PM Philippe CORNU
<philippe.cornu@foss.st.com> wrote:
>
>
>
> On 5/19/23 22:05, Alexandru Ardelean wrote:
> > From: Yannick Fertre <yannick.fertre@foss.st.com>
> >
> > Add documentation for new default-brightness-level property.
> >
> > Reviewed-by: Philippe CORNU <philippe.cornu@foss.st.com>
>
> Hi Alexandru,
> same comments as for the 1/2 patch.

Ack

Will do
Thanks
Alexandru

> Many thanks
> Philippe :-)
>
> > Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
> > Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
> > ---
> >
> > Link to original patch:
> >    https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98
> >
> >   .../bindings/leds/backlight/gpio-backlight.yaml          | 9 +++++++++
> >   1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > index 584030b6b0b9..b96c08cff0f0 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > @@ -23,6 +23,15 @@ properties:
> >       description: enable the backlight at boot.
> >       type: boolean
> >
> > +  default-brightness-level:
> > +    description:
> > +      The default brightness level (index into the array defined by the
> > +      "brightness-levels" property).
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +dependencies:
> > +  default-brightness-level: [ "brightness-levels" ]
> > +
> >   required:
> >     - compatible
> >     - gpios
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
index 584030b6b0b9..b96c08cff0f0 100644
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -23,6 +23,15 @@  properties:
     description: enable the backlight at boot.
     type: boolean
 
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+  default-brightness-level: [ "brightness-levels" ]
+
 required:
   - compatible
   - gpios