diff mbox series

[v4,4/5] fbdev: Split frame buffer support in FB and FB_CORE symbols

Message ID 20230703230534.997525-5-javierm@redhat.com (mailing list archive)
State Superseded
Headers show
Series Allow disabling all native fbdev drivers and only keeping DRM emulation | expand

Commit Message

Javier Martinez Canillas July 3, 2023, 11:05 p.m. UTC
Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).

The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.

That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.

This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
allowing CONFIG_FB to be disabled (and automatically disabling all the
fbdev drivers).

Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
layer so these two objects can be compiled out when CONFIG_FB is disabled.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---

Changes in v4:
- Fix menuconfig hierarchy that was broken in v3 (Arnd Bergmann).

Changes in v3:
- Really make a hidden symbol by removing the prompt (Arnd Bergmann).
- Change FB_CORE to config instead of menuconfig (Arnd Bergmann).
- Keep "depends on FB" for FIRMWARE_EDID (Arnd Bergmann).
- Compile out fb_backlight.o and fbmon.o that are only needed for FB
  (Arnd Bergmann).
- Make FB_DEVICE to depend on FB_CORE instead of selecting it.

Changes in v2:
- Keep "depends on FB" for FB_DDC, FB_HECUBA, FB_SVGALIB, FB_MACMODES,
  FB_BACKLIGHT, FB_MODE_HELPERS and FB_TILEBLITTING (Arnd Bergmann).
- Don't change the fb.o object name (Arnd Bergmann).
- Make FB_CORE a non-visible Kconfig symbol instead (Thomas Zimmermann).

 arch/x86/Makefile                 |  2 +-
 arch/x86/video/Makefile           |  2 +-
 drivers/video/console/Kconfig     |  2 +-
 drivers/video/fbdev/Kconfig       | 10 ++++++++--
 drivers/video/fbdev/core/Kconfig  | 30 +++++++++++++++++-------------
 drivers/video/fbdev/core/Makefile |  8 ++++----
 6 files changed, 32 insertions(+), 22 deletions(-)

Comments

Andy Shevchenko July 4, 2023, 7:20 a.m. UTC | #1
On Tue, Jul 04, 2023 at 01:05:28AM +0200, Javier Martinez Canillas wrote:
> Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
> drivers are needed (e.g: only to have support for framebuffer consoles).
> 
> The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
> and so it can only be enabled if that dependency is enabled as well.
> 
> That means fbdev drivers have to be explicitly disabled if users want to
> enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.
> 
> This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
> enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
> allowing CONFIG_FB to be disabled (and automatically disabling all the
> fbdev drivers).
> 
> Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
> layer so these two objects can be compiled out when CONFIG_FB is disabled.

...

Wondering if

  if FB_CORE
  ...
  endif

makes Kconfig looking better instead of replacing all these "depends on" lines.

>  config FB_DEVICE
>  	bool "Provide legacy /dev/fb* device"
> -	depends on FB
> +	depends on FB_CORE
>  	default y
Andy Shevchenko July 4, 2023, 7:21 a.m. UTC | #2
On Tue, Jul 04, 2023 at 10:20:35AM +0300, Andy Shevchenko wrote:
> On Tue, Jul 04, 2023 at 01:05:28AM +0200, Javier Martinez Canillas wrote:

...

> Wondering if
> 
>   if FB_CORE
>   ...
>   endif
> 
> makes Kconfig looking better instead of replacing all these "depends on" lines.

I meant user visible effect (via `make *config` and in the source code.

> >  config FB_DEVICE
> >  	bool "Provide legacy /dev/fb* device"
> > -	depends on FB
> > +	depends on FB_CORE
> >  	default y
Javier Martinez Canillas July 4, 2023, 7:56 a.m. UTC | #3
Hello Andy,

Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:

> On Tue, Jul 04, 2023 at 01:05:28AM +0200, Javier Martinez Canillas wrote:
>> Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
>> drivers are needed (e.g: only to have support for framebuffer consoles).
>> 
>> The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
>> and so it can only be enabled if that dependency is enabled as well.
>> 
>> That means fbdev drivers have to be explicitly disabled if users want to
>> enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.
>> 
>> This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
>> enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
>> allowing CONFIG_FB to be disabled (and automatically disabling all the
>> fbdev drivers).
>> 
>> Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
>> layer so these two objects can be compiled out when CONFIG_FB is disabled.
>
> ...
>
> Wondering if
>
>   if FB_CORE
>   ...
>   endif
>
> makes Kconfig looking better instead of replacing all these "depends on" lines.
>

Yes, I discussed that with Arnd and he said that the if / endif is just
syntax sugar so I didn't do that change to keep the patches simpler. But
is something that you could change as a follow-up if you prefer that way.
diff mbox series

Patch

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b39975977c03..89a02e69be5f 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -259,7 +259,7 @@  drivers-$(CONFIG_PCI)            += arch/x86/pci/
 # suspend and hibernation support
 drivers-$(CONFIG_PM) += arch/x86/power/
 
-drivers-$(CONFIG_FB) += arch/x86/video/
+drivers-$(CONFIG_FB_CORE) += arch/x86/video/
 
 ####
 # boot loader support. Several targets are kept for legacy purposes
diff --git a/arch/x86/video/Makefile b/arch/x86/video/Makefile
index 11640c116115..5ebe48752ffc 100644
--- a/arch/x86/video/Makefile
+++ b/arch/x86/video/Makefile
@@ -1,2 +1,2 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_FB)               += fbdev.o
+obj-$(CONFIG_FB_CORE)		+= fbdev.o
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index a2a88d42edf0..1b5a319971ed 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -72,7 +72,7 @@  config DUMMY_CONSOLE_ROWS
 
 config FRAMEBUFFER_CONSOLE
 	bool "Framebuffer Console support"
-	depends on FB && !UML
+	depends on FB_CORE && !UML
 	select VT_HW_CONSOLE_BINDING
 	select CRC32
 	select FONT_SUPPORT
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 06199f044546..179e728aff5d 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -4,9 +4,9 @@ 
 #
 
 menuconfig FB
-	tristate "Support for frame buffer devices"
+	tristate "Support for frame buffer device drivers"
+	select FB_CORE
 	select FB_NOTIFY
-	select VIDEO_CMDLINE
 	help
 	  The frame buffer device provides an abstraction for the graphics
 	  hardware. It represents the frame buffer of some video hardware and
@@ -30,6 +30,12 @@  menuconfig FB
 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
 	  information.
 
+	  This enables support for native frame buffer device (fbdev) drivers.
+
+	  The DRM subsystem provides support for emulated frame buffer devices
+	  on top of KMS drivers, but this option allows legacy fbdev drivers to
+	  be enabled as well.
+
 	  Say Y here and to the driver for your graphics board below if you
 	  are compiling a kernel for a non-x86 architecture.
 
diff --git a/drivers/video/fbdev/core/Kconfig b/drivers/video/fbdev/core/Kconfig
index 8e308d12c57b..15ce529d579a 100644
--- a/drivers/video/fbdev/core/Kconfig
+++ b/drivers/video/fbdev/core/Kconfig
@@ -3,6 +3,10 @@ 
 # fbdev core configuration
 #
 
+config FB_CORE
+	select VIDEO_CMDLINE
+	tristate
+
 config FB_NOTIFY
 	bool
 
@@ -23,7 +27,7 @@  config FIRMWARE_EDID
 
 config FB_DEVICE
 	bool "Provide legacy /dev/fb* device"
-	depends on FB
+	depends on FB_CORE
 	default y
 	help
 	  Say Y here if you want the legacy /dev/fb* device file and
@@ -39,7 +43,7 @@  config FB_DDC
 
 config FB_CFB_FILLRECT
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the cfb_fillrect function for generic software rectangle
 	  filling. This is used by drivers that don't provide their own
@@ -47,7 +51,7 @@  config FB_CFB_FILLRECT
 
 config FB_CFB_COPYAREA
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the cfb_copyarea function for generic software area copying.
 	  This is used by drivers that don't provide their own (accelerated)
@@ -55,7 +59,7 @@  config FB_CFB_COPYAREA
 
 config FB_CFB_IMAGEBLIT
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the cfb_imageblit function for generic software image
 	  blitting. This is used by drivers that don't provide their own
@@ -63,7 +67,7 @@  config FB_CFB_IMAGEBLIT
 
 config FB_CFB_REV_PIXELS_IN_BYTE
 	bool
-	depends on FB
+	depends on FB_CORE
 	help
 	  Allow generic frame-buffer functions to work on displays with 1, 2
 	  and 4 bits per pixel depths which has opposite order of pixels in
@@ -71,7 +75,7 @@  config FB_CFB_REV_PIXELS_IN_BYTE
 
 config FB_SYS_FILLRECT
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the sys_fillrect function for generic software rectangle
 	  filling. This is used by drivers that don't provide their own
@@ -79,7 +83,7 @@  config FB_SYS_FILLRECT
 
 config FB_SYS_COPYAREA
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the sys_copyarea function for generic software area copying.
 	  This is used by drivers that don't provide their own (accelerated)
@@ -87,7 +91,7 @@  config FB_SYS_COPYAREA
 
 config FB_SYS_IMAGEBLIT
 	tristate
-	depends on FB
+	depends on FB_CORE
 	help
 	  Include the sys_imageblit function for generic software image
 	  blitting. This is used by drivers that don't provide their own
@@ -126,22 +130,22 @@  endchoice
 
 config FB_SYS_FOPS
 	tristate
-	depends on FB
+	depends on FB_CORE
 
 config FB_DEFERRED_IO
 	bool
-	depends on FB
+	depends on FB_CORE
 
 config FB_IO_HELPERS
 	bool
-	depends on FB
+	depends on FB_CORE
 	select FB_CFB_COPYAREA
 	select FB_CFB_FILLRECT
 	select FB_CFB_IMAGEBLIT
 
 config FB_SYS_HELPERS
 	bool
-	depends on FB
+	depends on FB_CORE
 	select FB_SYS_COPYAREA
 	select FB_SYS_FILLRECT
 	select FB_SYS_FOPS
@@ -149,7 +153,7 @@  config FB_SYS_HELPERS
 
 config FB_SYS_HELPERS_DEFERRED
 	bool
-	depends on FB
+	depends on FB_CORE
 	select FB_DEFERRED_IO
 	select FB_SYS_HELPERS
 
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index 9150bafd9e89..2cd213716c12 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -1,10 +1,10 @@ 
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_FB_NOTIFY)           += fb_notify.o
-obj-$(CONFIG_FB)                  += fb.o
-fb-y                              := fb_backlight.o \
-                                     fb_info.o \
-                                     fbmem.o fbmon.o fbcmap.o \
+obj-$(CONFIG_FB_CORE)             += fb.o
+fb-y                              := fb_info.o \
+                                     fbmem.o fbcmap.o \
                                      modedb.o fbcvt.o fb_cmdline.o fb_io_fops.o
+fb-$(CONFIG_FB)                   += fb_backlight.o fbmon.o
 fb-$(CONFIG_FB_DEFERRED_IO)       += fb_defio.o
 fb-$(CONFIG_FB_DEVICE)            += fb_chrdev.o \
                                      fb_procfs.o \