diff mbox series

[04/17] backlight: corgi-lcd: Use backlight power constants

Message ID 20240611125321.6927-5-tzimmermann@suse.de (mailing list archive)
State Handled Elsewhere
Headers show
Series backlight: Introduce power-state constants | expand

Commit Message

Thomas Zimmermann June 11, 2024, 12:41 p.m. UTC
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.

Only change the driver's backlight device, but leave the LCD
device as-is.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/video/backlight/corgi_lcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index aad1680c9075d..b29ee8579b57e 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -526,7 +526,7 @@  static int corgi_lcd_probe(struct spi_device *spi)
 		return PTR_ERR(lcd->bl_dev);
 
 	lcd->bl_dev->props.brightness = pdata->default_intensity;
-	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+	lcd->bl_dev->props.power = BL_CORE_UNBLANK;
 
 	ret = setup_gpio_backlight(lcd, pdata);
 	if (ret)
@@ -547,7 +547,7 @@  static void corgi_lcd_remove(struct spi_device *spi)
 {
 	struct corgi_lcd *lcd = spi_get_drvdata(spi);
 
-	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+	lcd->bl_dev->props.power = BL_CORE_UNBLANK;
 	lcd->bl_dev->props.brightness = 0;
 	backlight_update_status(lcd->bl_dev);
 	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);