diff mbox series

[7/8] staging: sm750fb: rename detectReg to detect_reg

Message ID 20250417190302.13811-8-rubenru09@aol.com (mailing list archive)
State New
Headers show
Series staging: sm750fb: cleanup ddk750_sii164 | expand

Commit Message

Ruben Wauters April 17, 2025, 7:02 p.m. UTC 
Renames detectReg to detect_reg in a few functions

Fixes checkpatch.pl's camel case check

Signed-off-by: Ruben Wauters <rubenru09@aol.com>
---
 drivers/staging/sm750fb/ddk750_sii164.c | 38 ++++++++++++-------------
 1 file changed, 19 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 2ca72bfc67f2..769cbe768c49 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -289,28 +289,28 @@  void sii164_set_power(unsigned char power)
 static
 void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
 {
-	unsigned char detectReg;
+	unsigned char detect_reg;
 
-	detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
-		    ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
+	detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
+		     ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
 	switch (hot_plug_mode) {
 	case SII164_HOTPLUG_DISABLE:
-		detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+		detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
 		break;
 	case SII164_HOTPLUG_USE_MDI:
-		detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
-		detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
-		detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+		detect_reg &= ~SII164_DETECT_INTERRUPT_MASK;
+		detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+		detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
 		break;
 	case SII164_HOTPLUG_USE_RSEN:
-		detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+		detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
 		break;
 	case SII164_HOTPLUG_USE_HTPLG:
-		detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+		detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
 		break;
 	}
 
-	sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+	sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
 }
 
 /*
@@ -321,9 +321,9 @@  void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mo
  */
 void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
 {
-	unsigned char detectReg;
+	unsigned char detect_reg;
 
-	detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+	detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
 
 	/* Depending on each DVI controller, need to enable the hot plug based
 	 * on each individual chip design.
@@ -364,11 +364,11 @@  unsigned char sii164_is_connected(void)
  */
 unsigned char sii164_check_interrupt(void)
 {
-	unsigned char detectReg;
+	unsigned char detect_reg;
 
-	detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
-		    SII164_DETECT_MONITOR_STATE_MASK;
-	if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+	detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
+		     SII164_DETECT_MONITOR_STATE_MASK;
+	if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
 		return 1;
 	else
 		return 0;
@@ -380,12 +380,12 @@  unsigned char sii164_check_interrupt(void)
  */
 void sii164_clear_interrupt(void)
 {
-	unsigned char detectReg;
+	unsigned char detect_reg;
 
 	/* Clear the MDI interrupt */
-	detectReg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+	detect_reg = sm750_hw_i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
 	sm750_hw_i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
-			       detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+			       detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
 }
 
 #endif