diff mbox series

[24/26] Staging: fbtft: fb_tls8204: Switch to the gpio descriptor interface

Message ID 413693a296f8f890731369ccd755081466f81df7.1543142441.git.nishadkamdar@gmail.com (mailing list archive)
State New, archived
Headers show
Series Staging: fbtft: Switch to the gpio descriptor interface | expand

Commit Message

Nishad Kamdar Nov. 25, 2018, 11:43 a.m. UTC 
This switches the fb_tls8204.c to use GPIO descriptors
rather than numerical gpios.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
 drivers/staging/fbtft/fb_tls8204.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/fbtft/fb_tls8204.c b/drivers/staging/fbtft/fb_tls8204.c
index 277b6ed9c725..bec6dd0ffb01 100644
--- a/drivers/staging/fbtft/fb_tls8204.c
+++ b/drivers/staging/fbtft/fb_tls8204.c
@@ -12,7 +12,7 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
@@ -94,7 +94,7 @@  static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 		/* The display is 102x68 but the LCD is 84x48.
 		 * Set the write pointer at the start of each row.
 		 */
-		gpio_set_value(par->gpio.dc, 0);
+		gpiod_set_value(par->gpio.dc, 0);
 		write_reg(par, 0x80 | 0);
 		write_reg(par, 0x40 | y);
 
@@ -109,7 +109,7 @@  static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 			*buf++ = ch;
 		}
 		/* Write the row */
-		gpio_set_value(par->gpio.dc, 1);
+		gpiod_set_value(par->gpio.dc, 1);
 		ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
 		if (ret < 0) {
 			dev_err(par->info->device,