diff mbox series

[DO,NOT,MERGE,v6,19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema

Message ID a801115c277e65341da079c318a1b970f8d9e671.1704788539.git.ysato@users.sourceforge.jp (mailing list archive)
State Not Applicable
Headers show
Series Device Tree support for SH7751 based board | expand

Commit Message

Yoshinori Sato Jan. 9, 2024, 8:23 a.m. UTC
Renesas SH7751 external interrupt encoder json-schema.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 .../renesas,sh7751-irl-ext.yaml               | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml

Comments

Rob Herring (Arm) Jan. 9, 2024, 4:29 p.m. UTC | #1
On Tue, 09 Jan 2024 17:23:16 +0900, Yoshinori Sato wrote:
> Renesas SH7751 external interrupt encoder json-schema.
> 
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>  .../renesas,sh7751-irl-ext.yaml               | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.example.dtb: sh7751irl_encoder@a4000000: '#size-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/renesas,sh7751-irl-ext.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/a801115c277e65341da079c318a1b970f8d9e671.1704788539.git.ysato@users.sourceforge.jp

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Rob Herring (Arm) Jan. 9, 2024, 5:18 p.m. UTC | #2
On Tue, Jan 09, 2024 at 05:23:16PM +0900, Yoshinori Sato wrote:
> Renesas SH7751 external interrupt encoder json-schema.
> 
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
>  .../renesas,sh7751-irl-ext.yaml               | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> new file mode 100644
> index 000000000000..541b582b94ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/renesas,sh7751-irl-ext.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas SH7751 external interrupt encoder with enable regs.
> +
> +maintainers:
> +  - Yoshinori Sato <ysato@users.sourceforge.jp>
> +
> +description:
> +  This is the generally used external interrupt encoder on SH7751 based boards.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: renesas,sh7751-irl-ext
> +
> +  reg: true

Must define how many entries and what they are if more than one.

> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  '#address-cells':
> +    const: 0
> +
> +  renesas,set-to-disable:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Invert enable registers. Setting the bit to 0 enables interrupts.

Why is this a property? Does it change per board or instance? If not, it 
should be implied by compatible.

> +
> +  renesas,enable-bit:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description: |
> +      IRQ enable register bit mapping
> +      1st word interrupt level
> +      2nd word bit index of enable register

Same question here.

If it remains, then you need:

items:
  items:
    - description: interrupt level (does that mean high/low?)
    - description: bit index of enable register

Plus any constraints on the values if possible.


> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - renesas,enable-bit
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    r2dintc: sh7751irl_encoder@a4000000 {

interrupt-controller@a4000000 {

> +        compatible = "renesas,sh7751-irl-ext";
> +        reg = <0xa4000000 0x02>;
> +        interrupt-controller;
> +        #address-cells = <0>;
> +        #size-cells = <0>;
> +        #interrupt-cells = <1>;
> +        renesas,enable-bit = <0 11>,            /* PCI INTD */
> +                             <1 9>,             /* CF IDE */
> +                             <2 8>,             /* CF CD */
> +                             <3 12>,            /* PCI INTC */
> +                             <4 10>,            /* SM501 */
> +                             <5 6>,             /* KEY */
> +                             <6 5>,             /* RTC ALARM */
> +                             <7 4>,             /* RTC T */
> +                             <8 7>,             /* SDCARD */
> +                             <9 14>,            /* PCI INTA */
> +                             <10 13>,           /* PCI INTB */
> +                             <11 0>,            /* EXT */
> +                             <12 15>;           /* TP */

Looks like 'interrupt level' is just the index of the values? Why not 
make this an array?

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
new file mode 100644
index 000000000000..541b582b94ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-irl-ext.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,sh7751-irl-ext.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH7751 external interrupt encoder with enable regs.
+
+maintainers:
+  - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+description:
+  This is the generally used external interrupt encoder on SH7751 based boards.
+
+properties:
+  compatible:
+    items:
+      - const: renesas,sh7751-irl-ext
+
+  reg: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  renesas,set-to-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Invert enable registers. Setting the bit to 0 enables interrupts.
+
+  renesas,enable-bit:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      IRQ enable register bit mapping
+      1st word interrupt level
+      2nd word bit index of enable register
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - renesas,enable-bit
+
+additionalProperties: false
+
+examples:
+  - |
+    r2dintc: sh7751irl_encoder@a4000000 {
+        compatible = "renesas,sh7751-irl-ext";
+        reg = <0xa4000000 0x02>;
+        interrupt-controller;
+        #address-cells = <0>;
+        #size-cells = <0>;
+        #interrupt-cells = <1>;
+        renesas,enable-bit = <0 11>,            /* PCI INTD */
+                             <1 9>,             /* CF IDE */
+                             <2 8>,             /* CF CD */
+                             <3 12>,            /* PCI INTC */
+                             <4 10>,            /* SM501 */
+                             <5 6>,             /* KEY */
+                             <6 5>,             /* RTC ALARM */
+                             <7 4>,             /* RTC T */
+                             <8 7>,             /* SDCARD */
+                             <9 14>,            /* PCI INTA */
+                             <10 13>,           /* PCI INTB */
+                             <11 0>,            /* EXT */
+                             <12 15>;           /* TP */
+    };