mbox series

[0/3] fpga: dfl: add support for Intel D5005 card

Message ID 20210405235301.187542-1-matthew.gerlach@linux.intel.com (mailing list archive)
Headers show
Series fpga: dfl: add support for Intel D5005 card | expand


matthew.gerlach@linux.intel.com April 5, 2021, 11:52 p.m. UTC
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

This patch set adds basic support for the Intel D5005 card to the
dfl driver framework.

Patch 1 adds the PCIe device id of the D5005 to the dfl-pci id table.

Patch 2 adds a dfl driver for the Altera SPI Master which is connected
to the board's BMC.

Patch 3 adds hwmon support for the sensors monitored by the board's BMC.

Matthew Gerlach (2):
  fpga: dfl: Add DFL bus driver for Altera SPI Master
  hwmon: intel-m10-bmc-hwmon: add sensor support of Intel D5005 card

Russ Weight (1):
  fpga: dfl: pci: add DID for D5005 PAC cards

 drivers/fpga/Kconfig                |   9 ++
 drivers/fpga/Makefile               |   1 +
 drivers/fpga/dfl-pci.c              |  18 +--
 drivers/fpga/dfl-spi-altera.c       | 221 ++++++++++++++++++++++++++++++++++++
 drivers/hwmon/intel-m10-bmc-hwmon.c | 122 ++++++++++++++++++++
 drivers/mfd/intel-m10-bmc.c         |  10 ++
 6 files changed, 374 insertions(+), 7 deletions(-)
 create mode 100644 drivers/fpga/dfl-spi-altera.c