mbox series

[v6,0/4] Add Bitstream configuration support for Versal

Message ID 20210520080954.1393-1-nava.manne@xilinx.com (mailing list archive)
Headers show
Series Add Bitstream configuration support for Versal | expand


Nava kishore Manne May 20, 2021, 8:09 a.m. UTC
This series Adds FPGA manager driver support for Xilinx Versal SoC.
it uses the firmware interface to configure the programmable logic.

Changes for v4:
                -Rebase the patch series on linux-next.

Changes for v5:
                -Updated binding doc's.

Changes for v6:
                -Updated firmware binding doc.

Appana Durga Kedareswara rao (1):
  dt-bindings: fpga: Add binding doc for versal fpga manager

Nava kishore Manne (3):
  drivers: firmware: Add PDI load API support
  dt-bindings: firmware: Add bindings for xilinx firmware
  fpga: versal-fpga: Add versal fpga manager driver

 .../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 102 +++++++++++++++
 .../bindings/fpga/xlnx,versal-fpga.yaml       |  33 +++++
 drivers/firmware/xilinx/zynqmp.c              |  17 +++
 drivers/fpga/Kconfig                          |   9 ++
 drivers/fpga/Makefile                         |   1 +
 drivers/fpga/versal-fpga.c                    | 117 ++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h          |  10 ++
 7 files changed, 289 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
 create mode 100644 drivers/fpga/versal-fpga.c