[PATCHv4,2/3] fpga: altera-cvp: Preparation for V2 parts.

Commit Message

Thor Thayer July 31, 2019, 4:42 p.m. UTC

From: Thor Thayer <[e-mail]>

In preparation for adding newer V2 parts that use a FIFO,
reorganize altera_cvp_chk_error() and change the write
function to block based.
V2 parts have a block size matching the FIFO while older
V1 parts write a 32 bit word at a time.

Signed-off-by: Thor Thayer <[e-mail]>
---
v2 Remove inline function declaration
   Reverse Christmas Tree format for local variables
v3 Add return code check in altera_cvp_chk_error()
v4 Use min() function to determine block length
---
 drivers/fpga/altera-cvp.c | 69 +++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 26 deletions(-)

Patch

diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 9df2073331cb..3b8386fd32e7 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -143,6 +143,42 @@  static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
 	return -ETIMEDOUT;
 }
 
+static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 val;
+	int ret;
+
+	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+	ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+	if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
+		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+			bytes);
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int altera_cvp_send_block(struct altera_cvp_conf *conf,
+				 const u32 *data, size_t len)
+{
+	u32 mask, words = len / sizeof(u32);
+	int i, remainder;
+
+	for (i = 0; i < words; i++)
+		conf->write_data(conf, *data++);
+
+	/* write up to 3 trailing bytes, if any */
+	remainder = len % sizeof(u32);
+	if (remainder) {
+		mask = BIT(remainder * 8) - 1;
+		if (mask)
+			conf->write_data(conf, *data & mask);
+	}
+
+	return 0;
+}
+
 static int altera_cvp_teardown(struct fpga_manager *mgr,
 			       struct fpga_image_info *info)
 {
@@ -265,39 +301,25 @@  static int altera_cvp_write_init(struct fpga_manager *mgr,
 	return 0;
 }
 
-static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
-{
-	struct altera_cvp_conf *conf = mgr->priv;
-	u32 val;
-
-	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
-	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
-	if (val & VSE_CVP_STATUS_CFG_ERR) {
-		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
-			bytes);
-		return -EPROTO;
-	}
-	return 0;
-}
-
 static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
 			    size_t count)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
+	size_t done, remaining, len;
 	const u32 *data;
-	size_t done, remaining;
 	int status = 0;
-	u32 mask;
 
 	/* STEP 9 - write 32-bit data from RBF file to CVP data register */
 	data = (u32 *)buf;
 	remaining = count;
 	done = 0;
 
-	while (remaining >= 4) {
-		conf->write_data(conf, *data++);
-		done += 4;
-		remaining -= 4;
+	while (remaining) {
+		len = min(sizeof(u32), remaining);
+		altera_cvp_send_block(conf, data, len);
+		data++;
+		done += len;
+		remaining -= len;
 
 		/*
 		 * STEP 10 (optional) and STEP 11
@@ -315,11 +337,6 @@  static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
 		}
 	}
 
-	/* write up to 3 trailing bytes, if any */
-	mask = BIT(remaining * 8) - 1;
-	if (mask)
-		conf->write_data(conf, *data & mask);
-
 	if (altera_cvp_chkcfg)
 		status = altera_cvp_chk_error(mgr, count);