diff mbox series

[v5,4/4] fpga: lattice: reorganize to subdir layout

Message ID 20210622200511.3739914-6-trix@redhat.com (mailing list archive)
State New
Headers show
Series fpga: reorganize to subdirs | expand

Commit Message

Tom Rix June 22, 2021, 8:05 p.m. UTC
From: Tom Rix <trix@redhat.com>

Follow drivers/net/ethernet/ which has control configs
NET_VENDOR_BLA that map to drivers/net/ethernet/bla
Since fpgas do not have many vendors, drop the 'VENDOR' and use
FPGA_BLA.

There are several new subdirs
altera/
dfl/
lattice/
xilinx/

Each subdir has a Kconfig that has a new/reused

if FPGA_BLA
  ... existing configs ...
endif FPGA_BLA

Which is sourced into the main fpga/Kconfig

Each subdir has a Makefile whose transversal is controlled in the
fpga/Makefile by

obj-$(CONFIG_FPGA_BLA) += bla/

This is the lattice/ subdir part.

Create a lattice/ subdir
Move ice40* and machxo2* files to it.
Add a Kconfig and Makefile

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/fpga/Kconfig                     | 14 +-----------
 drivers/fpga/Makefile                    | 13 ++++-------
 drivers/fpga/lattice/Kconfig             | 29 ++++++++++++++++++++++++
 drivers/fpga/lattice/Makefile            |  4 ++++
 drivers/fpga/{ => lattice}/ice40-spi.c   |  0
 drivers/fpga/{ => lattice}/machxo2-spi.c |  0
 6 files changed, 39 insertions(+), 21 deletions(-)
 create mode 100644 drivers/fpga/lattice/Kconfig
 create mode 100644 drivers/fpga/lattice/Makefile
 rename drivers/fpga/{ => lattice}/ice40-spi.c (100%)
 rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%)
diff mbox series

Patch

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 2c829b1105925..955b155da3575 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -12,19 +12,6 @@  menuconfig FPGA
 
 if FPGA
 
-config FPGA_MGR_ICE40_SPI
-	tristate "Lattice iCE40 SPI"
-	depends on OF && SPI
-	help
-	  FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
-
-config FPGA_MGR_MACHXO2_SPI
-	tristate "Lattice MachXO2 SPI"
-	depends on SPI
-	help
-	  FPGA manager driver support for Lattice MachXO2 configuration
-	  over slave SPI interface.
-
 config FPGA_BRIDGE
 	tristate "FPGA Bridge Framework"
 	help
@@ -48,6 +35,7 @@  config OF_FPGA_REGION
 
 source "drivers/fpga/altera/Kconfig"
 source "drivers/fpga/dfl/Kconfig"
+source "drivers/fpga/lattice/Kconfig"
 source "drivers/fpga/xilinx/Kconfig"
 
 endif # FPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index db83aeb997f24..9197698201e3a 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -4,19 +4,16 @@ 
 #
 
 # Core FPGA Manager Framework
-obj-$(CONFIG_FPGA)			+= fpga-mgr.o
-
-# FPGA Manager Drivers
-obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
-obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI)	+= machxo2-spi.o
+obj-$(CONFIG_FPGA) += fpga-mgr.o
 
 # FPGA Bridge Drivers
-obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
+obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
 
 # High Level Interfaces
-obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
-obj-$(CONFIG_OF_FPGA_REGION)		+= of-fpga-region.o
+obj-$(CONFIG_FPGA_REGION) += fpga-region.o
+obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o
 
 obj-$(CONFIG_FPGA_ALTERA) += altera/
 obj-$(CONFIG_FPGA_DFL) += dfl/
+obj-$(CONFIG_FPGA_LATTICE) += lattice/
 obj-$(CONFIG_FPGA_XILINX) += xilinx/
diff --git a/drivers/fpga/lattice/Kconfig b/drivers/fpga/lattice/Kconfig
new file mode 100644
index 0000000000000..47f5a0c62aa4e
--- /dev/null
+++ b/drivers/fpga/lattice/Kconfig
@@ -0,0 +1,29 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+
+config FPGA_LATTICE
+	bool "Lattice FPGAs"
+	default y
+	help
+	  If you have a Lattice FPGA, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Lattice FPGAs. If you say Y, you will be asked
+	  for your specific device in the following questions.
+
+if FPGA_LATTICE
+
+config FPGA_MGR_ICE40_SPI
+	tristate "Lattice iCE40 SPI"
+	depends on OF && SPI
+	help
+	  FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
+
+config FPGA_MGR_MACHXO2_SPI
+	tristate "Lattice MachXO2 SPI"
+	depends on SPI
+	help
+	  FPGA manager driver support for Lattice MachXO2 configuration
+	  over slave SPI interface.
+
+endif #FPGA_LATTICE
diff --git a/drivers/fpga/lattice/Makefile b/drivers/fpga/lattice/Makefile
new file mode 100644
index 0000000000000..f542c96a73d40
--- /dev/null
+++ b/drivers/fpga/lattice/Makefile
@@ -0,0 +1,4 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
+obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o
diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/lattice/ice40-spi.c
similarity index 100%
rename from drivers/fpga/ice40-spi.c
rename to drivers/fpga/lattice/ice40-spi.c
diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/lattice/machxo2-spi.c
similarity index 100%
rename from drivers/fpga/machxo2-spi.c
rename to drivers/fpga/lattice/machxo2-spi.c