diff mbox series

[v2,5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors

Message ID 20210625074213.654274-6-martin@geanix.com (mailing list archive)
State New
Headers show
Series fpga/mfd/hwmon: Initial support for Silicom N5010 PAC | expand

Commit Message

Martin Hundebøll June 25, 2021, 7:42 a.m. UTC
From: Martin Hundebøll <mhu@silicom.dk>

Add the list of sensors supported by the Silicom n5010 PAC, and enable
the drivers as a subtype of the intel-m10-bmc multi-function driver.

Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
---

Changes since v1:
 * Patch split out to separate hwmon changes

 drivers/hwmon/intel-m10-bmc-hwmon.c | 116 ++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

Comments

Xu Yilun June 28, 2021, 6 a.m. UTC | #1
It is good to me.

On Fri, Jun 25, 2021 at 09:42:13AM +0200, Martin Hundebøll wrote:
> From: Martin Hundebøll <mhu@silicom.dk>
> 
> Add the list of sensors supported by the Silicom n5010 PAC, and enable
> the drivers as a subtype of the intel-m10-bmc multi-function driver.
> 
> Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
> ---
> 
> Changes since v1:
>  * Patch split out to separate hwmon changes
> 
>  drivers/hwmon/intel-m10-bmc-hwmon.c | 116 ++++++++++++++++++++++++++++
>  1 file changed, 116 insertions(+)
> 
> diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
> index bd7ed2ed3a1e..7a08e4c44a4b 100644
> --- a/drivers/hwmon/intel-m10-bmc-hwmon.c
> +++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
> @@ -228,6 +228,118 @@ static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
>  	.hinfo = d5005bmc_hinfo,
>  };
>  
> +static const struct m10bmc_sdata n5010bmc_temp_tbl[] = {
> +	{ 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" },
> +	{ 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" },
> +	{ 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" },
> +	{ 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" },
> +	{ 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" },
> +	{ 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" },
> +	{ 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" },
> +	{ 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" },
> +	{ 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" },
> +	{ 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" },
> +	{ 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" },
> +	{ 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" },
> +	{ 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" },
> +	{ 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" },
> +	{ 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" },
> +	{ 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" },
> +	{ 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" },
> +};
> +
> +static const struct m10bmc_sdata n5010bmc_in_tbl[] = {
> +	{ 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" },
> +	{ 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" },
> +	{ 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" },
> +	{ 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" },
> +	{ 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" },
> +	{ 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" },
> +	{ 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" },
> +	{ 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" },
> +	{ 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" },
> +	{ 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" },
> +	{ 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" },
> +	{ 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" },
> +	{ 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" },
> +};
> +
> +static const struct m10bmc_sdata n5010bmc_curr_tbl[] = {
> +	{ 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" },
> +	{ 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" },
> +	{ 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" },
> +	{ 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" },
> +	{ 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" },
> +	{ 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" },
> +	{ 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" },
> +	{ 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" },
> +	{ 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" },
> +	{ 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" },
> +	{ 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" },
> +	{ 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" },
> +	{ 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" },
> +};
> +
> +static const struct hwmon_channel_info *n5010bmc_hinfo[] = {
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL),
> +	HWMON_CHANNEL_INFO(in,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL),
> +	HWMON_CHANNEL_INFO(curr,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL),
> +	NULL
> +};
> +
> +static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = {
> +	.tables = {
> +		[hwmon_temp] = n5010bmc_temp_tbl,
> +		[hwmon_in] = n5010bmc_in_tbl,
> +		[hwmon_curr] = n5010bmc_curr_tbl,
> +	},
> +
> +	.hinfo = n5010bmc_hinfo,
> +};
> +
>  static umode_t
>  m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
>  			u32 attr, int channel)
> @@ -438,6 +550,10 @@ static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
>  		.name = "d5005bmc-hwmon",
>  		.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
>  	},
> +	{
> +		.name = "n5010bmc-hwmon",
> +		.driver_data = (unsigned long)&n5010bmc_hwmon_bdata,
> +	},
>  	{ }
>  };
>  
> -- 
> 2.31.0
Guenter Roeck June 28, 2021, 2:11 p.m. UTC | #2
On 6/27/21 11:00 PM, Xu Yilun wrote:
> It is good to me.
> 

As already pointed out, please don't top-post, and provide a
formal Reviewed-by: or Acked-by: tag.

Thanks,
Guenter

> On Fri, Jun 25, 2021 at 09:42:13AM +0200, Martin Hundebøll wrote:
>> From: Martin Hundebøll <mhu@silicom.dk>
>>
>> Add the list of sensors supported by the Silicom n5010 PAC, and enable
>> the drivers as a subtype of the intel-m10-bmc multi-function driver.
>>
>> Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
>> ---
>>
>> Changes since v1:
>>   * Patch split out to separate hwmon changes
>>
>>   drivers/hwmon/intel-m10-bmc-hwmon.c | 116 ++++++++++++++++++++++++++++
>>   1 file changed, 116 insertions(+)
>>
>> diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
>> index bd7ed2ed3a1e..7a08e4c44a4b 100644
>> --- a/drivers/hwmon/intel-m10-bmc-hwmon.c
>> +++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
>> @@ -228,6 +228,118 @@ static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
>>   	.hinfo = d5005bmc_hinfo,
>>   };
>>   
>> +static const struct m10bmc_sdata n5010bmc_temp_tbl[] = {
>> +	{ 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" },
>> +	{ 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" },
>> +	{ 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" },
>> +	{ 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" },
>> +	{ 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" },
>> +	{ 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" },
>> +	{ 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" },
>> +	{ 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" },
>> +	{ 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" },
>> +	{ 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" },
>> +	{ 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" },
>> +	{ 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" },
>> +	{ 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" },
>> +	{ 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" },
>> +	{ 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" },
>> +	{ 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" },
>> +	{ 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" },
>> +};
>> +
>> +static const struct m10bmc_sdata n5010bmc_in_tbl[] = {
>> +	{ 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" },
>> +	{ 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" },
>> +	{ 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" },
>> +	{ 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" },
>> +	{ 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" },
>> +	{ 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" },
>> +	{ 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" },
>> +	{ 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" },
>> +	{ 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" },
>> +	{ 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" },
>> +	{ 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" },
>> +	{ 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" },
>> +	{ 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" },
>> +};
>> +
>> +static const struct m10bmc_sdata n5010bmc_curr_tbl[] = {
>> +	{ 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" },
>> +	{ 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" },
>> +	{ 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" },
>> +	{ 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" },
>> +	{ 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" },
>> +	{ 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" },
>> +	{ 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" },
>> +	{ 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" },
>> +	{ 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" },
>> +	{ 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" },
>> +	{ 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" },
>> +	{ 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" },
>> +	{ 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" },
>> +};
>> +
>> +static const struct hwmon_channel_info *n5010bmc_hinfo[] = {
>> +	HWMON_CHANNEL_INFO(temp,
>> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL,
>> +			   HWMON_T_INPUT | HWMON_T_LABEL),
>> +	HWMON_CHANNEL_INFO(in,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>> +			   HWMON_I_INPUT | HWMON_I_LABEL),
>> +	HWMON_CHANNEL_INFO(curr,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL,
>> +			   HWMON_C_INPUT | HWMON_C_LABEL),
>> +	NULL
>> +};
>> +
>> +static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = {
>> +	.tables = {
>> +		[hwmon_temp] = n5010bmc_temp_tbl,
>> +		[hwmon_in] = n5010bmc_in_tbl,
>> +		[hwmon_curr] = n5010bmc_curr_tbl,
>> +	},
>> +
>> +	.hinfo = n5010bmc_hinfo,
>> +};
>> +
>>   static umode_t
>>   m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
>>   			u32 attr, int channel)
>> @@ -438,6 +550,10 @@ static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
>>   		.name = "d5005bmc-hwmon",
>>   		.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
>>   	},
>> +	{
>> +		.name = "n5010bmc-hwmon",
>> +		.driver_data = (unsigned long)&n5010bmc_hwmon_bdata,
>> +	},
>>   	{ }
>>   };
>>   
>> -- 
>> 2.31.0
Guenter Roeck June 28, 2021, 4:35 p.m. UTC | #3
On Fri, Jun 25, 2021 at 09:42:13AM +0200, Martin Hundebøll wrote:
> From: Martin Hundebøll <mhu@silicom.dk>
> 
> Add the list of sensors supported by the Silicom n5010 PAC, and enable
> the drivers as a subtype of the intel-m10-bmc multi-function driver.
> 
> Signed-off-by: Martin Hundebøll <mhu@silicom.dk>

For my reference:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Not sure if I can apply this patch as-is to hwmon, or if it needs
to wait for the other patches in the series. Any thoughts / comments ?

Guenter

> ---
> 
> Changes since v1:
>  * Patch split out to separate hwmon changes
> 
>  drivers/hwmon/intel-m10-bmc-hwmon.c | 116 ++++++++++++++++++++++++++++
>  1 file changed, 116 insertions(+)
> 
> diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
> index bd7ed2ed3a1e..7a08e4c44a4b 100644
> --- a/drivers/hwmon/intel-m10-bmc-hwmon.c
> +++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
> @@ -228,6 +228,118 @@ static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
>  	.hinfo = d5005bmc_hinfo,
>  };
>  
> +static const struct m10bmc_sdata n5010bmc_temp_tbl[] = {
> +	{ 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" },
> +	{ 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" },
> +	{ 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" },
> +	{ 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" },
> +	{ 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" },
> +	{ 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" },
> +	{ 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" },
> +	{ 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" },
> +	{ 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" },
> +	{ 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" },
> +	{ 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" },
> +	{ 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" },
> +	{ 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" },
> +	{ 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" },
> +	{ 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" },
> +	{ 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" },
> +	{ 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" },
> +};
> +
> +static const struct m10bmc_sdata n5010bmc_in_tbl[] = {
> +	{ 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" },
> +	{ 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" },
> +	{ 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" },
> +	{ 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" },
> +	{ 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" },
> +	{ 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" },
> +	{ 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" },
> +	{ 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" },
> +	{ 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" },
> +	{ 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" },
> +	{ 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" },
> +	{ 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" },
> +	{ 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" },
> +};
> +
> +static const struct m10bmc_sdata n5010bmc_curr_tbl[] = {
> +	{ 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" },
> +	{ 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" },
> +	{ 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" },
> +	{ 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" },
> +	{ 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" },
> +	{ 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" },
> +	{ 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" },
> +	{ 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" },
> +	{ 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" },
> +	{ 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" },
> +	{ 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" },
> +	{ 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" },
> +	{ 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" },
> +};
> +
> +static const struct hwmon_channel_info *n5010bmc_hinfo[] = {
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL),
> +	HWMON_CHANNEL_INFO(in,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL),
> +	HWMON_CHANNEL_INFO(curr,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL),
> +	NULL
> +};
> +
> +static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = {
> +	.tables = {
> +		[hwmon_temp] = n5010bmc_temp_tbl,
> +		[hwmon_in] = n5010bmc_in_tbl,
> +		[hwmon_curr] = n5010bmc_curr_tbl,
> +	},
> +
> +	.hinfo = n5010bmc_hinfo,
> +};
> +
>  static umode_t
>  m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
>  			u32 attr, int channel)
> @@ -438,6 +550,10 @@ static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
>  		.name = "d5005bmc-hwmon",
>  		.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
>  	},
> +	{
> +		.name = "n5010bmc-hwmon",
> +		.driver_data = (unsigned long)&n5010bmc_hwmon_bdata,
> +	},
>  	{ }
>  };
>  
> -- 
> 2.31.0
>
Moritz Fischer June 28, 2021, 5:28 p.m. UTC | #4
Hi Guenter,

On Mon, Jun 28, 2021 at 09:35:56AM -0700, Guenter Roeck wrote:
> On Fri, Jun 25, 2021 at 09:42:13AM +0200, Martin Hundebøll wrote:
> > From: Martin Hundebøll <mhu@silicom.dk>
> > 
> > Add the list of sensors supported by the Silicom n5010 PAC, and enable
> > the drivers as a subtype of the intel-m10-bmc multi-function driver.
> > 
> > Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
> 
> For my reference:
> 
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>

> 
> Not sure if I can apply this patch as-is to hwmon, or if it needs
> to wait for the other patches in the series. Any thoughts / comments ?

I don't see how it would break anything in itself since it just adds
extra compatible and data.

I'd probably wait with applying until discussions around the mfd and dfl
parts are resolved since otherwise there's no user.

> Guenter

Thanks,
Moritz
Xu Yilun June 29, 2021, 1:40 a.m. UTC | #5
On Mon, Jun 28, 2021 at 10:28:28AM -0700, Moritz Fischer wrote:
> Hi Guenter,
> 
> On Mon, Jun 28, 2021 at 09:35:56AM -0700, Guenter Roeck wrote:
> > On Fri, Jun 25, 2021 at 09:42:13AM +0200, Martin Hundebøll wrote:
> > > From: Martin Hundebøll <mhu@silicom.dk>
> > > 
> > > Add the list of sensors supported by the Silicom n5010 PAC, and enable
> > > the drivers as a subtype of the intel-m10-bmc multi-function driver.
> > > 
> > > Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
> > 
> > For my reference:
> > 
> > Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>

Thanks,
Yilun

> 
> > 
> > Not sure if I can apply this patch as-is to hwmon, or if it needs
> > to wait for the other patches in the series. Any thoughts / comments ?
> 
> I don't see how it would break anything in itself since it just adds
> extra compatible and data.
> 
> I'd probably wait with applying until discussions around the mfd and dfl
> parts are resolved since otherwise there's no user.
> 
> > Guenter
> 
> Thanks,
> Moritz
diff mbox series

Patch

diff --git a/drivers/hwmon/intel-m10-bmc-hwmon.c b/drivers/hwmon/intel-m10-bmc-hwmon.c
index bd7ed2ed3a1e..7a08e4c44a4b 100644
--- a/drivers/hwmon/intel-m10-bmc-hwmon.c
+++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
@@ -228,6 +228,118 @@  static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
 	.hinfo = d5005bmc_hinfo,
 };
 
+static const struct m10bmc_sdata n5010bmc_temp_tbl[] = {
+	{ 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" },
+	{ 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" },
+	{ 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" },
+	{ 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" },
+	{ 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" },
+	{ 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" },
+	{ 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" },
+	{ 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" },
+	{ 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" },
+	{ 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" },
+	{ 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" },
+	{ 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" },
+	{ 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" },
+	{ 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" },
+	{ 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" },
+	{ 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" },
+	{ 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" },
+};
+
+static const struct m10bmc_sdata n5010bmc_in_tbl[] = {
+	{ 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" },
+	{ 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" },
+	{ 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" },
+	{ 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" },
+	{ 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" },
+	{ 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" },
+	{ 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" },
+	{ 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" },
+	{ 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" },
+	{ 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" },
+	{ 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" },
+	{ 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" },
+	{ 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" },
+};
+
+static const struct m10bmc_sdata n5010bmc_curr_tbl[] = {
+	{ 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" },
+	{ 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" },
+	{ 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" },
+	{ 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" },
+	{ 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" },
+	{ 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" },
+	{ 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" },
+	{ 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" },
+	{ 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" },
+	{ 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" },
+	{ 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" },
+	{ 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" },
+	{ 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" },
+};
+
+static const struct hwmon_channel_info *n5010bmc_hinfo[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL),
+	NULL
+};
+
+static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = {
+	.tables = {
+		[hwmon_temp] = n5010bmc_temp_tbl,
+		[hwmon_in] = n5010bmc_in_tbl,
+		[hwmon_curr] = n5010bmc_curr_tbl,
+	},
+
+	.hinfo = n5010bmc_hinfo,
+};
+
 static umode_t
 m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
 			u32 attr, int channel)
@@ -438,6 +550,10 @@  static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
 		.name = "d5005bmc-hwmon",
 		.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
 	},
+	{
+		.name = "n5010bmc-hwmon",
+		.driver_data = (unsigned long)&n5010bmc_hwmon_bdata,
+	},
 	{ }
 };