@@ -17,8 +17,14 @@
struct bmc_sec {
struct device *dev;
struct intel_m10bmc *m10bmc;
+ struct fw_upload *fwl;
+ char *fw_name;
+ u32 fw_name_id;
+ bool cancel_request;
};
+static DEFINE_XARRAY_ALLOC(fw_upload_xa);
+
/* Root Entry Hash (REH) support */
#define REH_SHA256_SIZE 32
#define REH_SHA384_SIZE 48
@@ -178,9 +184,349 @@ static const struct attribute_group *bmc_sec_attr_groups[] = {
NULL,
};
+static void log_error_regs(struct bmc_sec *sec, u32 doorbell)
+{
+ u32 auth_result;
+
+ dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
+
+ if (!m10bmc_sys_read(sec->m10bmc, M10BMC_AUTH_RESULT, &auth_result))
+ dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
+}
+
+static enum fw_upload_err rsu_check_idle(struct bmc_sec *sec)
+{
+ u32 doorbell;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ if (rsu_prog(doorbell) != RSU_PROG_IDLE &&
+ rsu_prog(doorbell) != RSU_PROG_RSU_DONE) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_BUSY;
+ }
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+static inline bool rsu_start_done(u32 doorbell)
+{
+ u32 status, progress;
+
+ if (doorbell & DRBL_RSU_REQUEST)
+ return false;
+
+ status = rsu_stat(doorbell);
+ if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT)
+ return true;
+
+ progress = rsu_prog(doorbell);
+ if (progress != RSU_PROG_IDLE && progress != RSU_PROG_RSU_DONE)
+ return true;
+
+ return false;
+}
+
+static enum fw_upload_err rsu_update_init(struct bmc_sec *sec)
+{
+ u32 doorbell, status;
+ int ret;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_RSU_REQUEST | DRBL_HOST_STATUS,
+ DRBL_RSU_REQUEST |
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_IDLE));
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ doorbell,
+ rsu_start_done(doorbell),
+ NIOS_HANDSHAKE_INTERVAL_US,
+ NIOS_HANDSHAKE_TIMEOUT_US);
+
+ if (ret == -ETIMEDOUT) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_TIMEOUT;
+ } else if (ret) {
+ return FW_UPLOAD_ERR_RW_ERROR;
+ }
+
+ status = rsu_stat(doorbell);
+ if (status == RSU_STAT_WEAROUT) {
+ dev_warn(sec->dev, "Excessive flash update count detected\n");
+ return FW_UPLOAD_ERR_WEAROUT;
+ } else if (status == RSU_STAT_ERASE_FAIL) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_HW_ERROR;
+ }
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err rsu_prog_ready(struct bmc_sec *sec)
+{
+ unsigned long poll_timeout;
+ u32 doorbell, progress;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ poll_timeout = jiffies + msecs_to_jiffies(RSU_PREP_TIMEOUT_MS);
+ while (rsu_prog(doorbell) == RSU_PROG_PREPARE) {
+ msleep(RSU_PREP_INTERVAL_MS);
+ if (time_after(jiffies, poll_timeout))
+ break;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+ }
+
+ progress = rsu_prog(doorbell);
+ if (progress == RSU_PROG_PREPARE) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_TIMEOUT;
+ } else if (progress != RSU_PROG_READY) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_HW_ERROR;
+ }
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err rsu_send_data(struct bmc_sec *sec)
+{
+ u32 doorbell;
+ int ret;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_HOST_STATUS,
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_WRITE_DONE));
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ doorbell,
+ rsu_prog(doorbell) != RSU_PROG_READY,
+ NIOS_HANDSHAKE_INTERVAL_US,
+ NIOS_HANDSHAKE_TIMEOUT_US);
+
+ if (ret == -ETIMEDOUT) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_TIMEOUT;
+ } else if (ret) {
+ return FW_UPLOAD_ERR_RW_ERROR;
+ }
+
+ switch (rsu_stat(doorbell)) {
+ case RSU_STAT_NORMAL:
+ case RSU_STAT_NIOS_OK:
+ case RSU_STAT_USER_OK:
+ case RSU_STAT_FACTORY_OK:
+ break;
+ default:
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_HW_ERROR;
+ }
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+static int rsu_check_complete(struct bmc_sec *sec, u32 *doorbell)
+{
+ if (m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, doorbell))
+ return -EIO;
+
+ switch (rsu_stat(*doorbell)) {
+ case RSU_STAT_NORMAL:
+ case RSU_STAT_NIOS_OK:
+ case RSU_STAT_USER_OK:
+ case RSU_STAT_FACTORY_OK:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (rsu_prog(*doorbell)) {
+ case RSU_PROG_IDLE:
+ case RSU_PROG_RSU_DONE:
+ return 0;
+ case RSU_PROG_AUTHENTICATING:
+ case RSU_PROG_COPYING:
+ case RSU_PROG_UPDATE_CANCEL:
+ case RSU_PROG_PROGRAM_KEY_HASH:
+ return -EAGAIN;
+ default:
+ return -EINVAL;
+ }
+}
+
+static enum fw_upload_err rsu_cancel(struct bmc_sec *sec)
+{
+ u32 doorbell;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ if (rsu_prog(doorbell) != RSU_PROG_READY)
+ return FW_UPLOAD_ERR_BUSY;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_HOST_STATUS,
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_ABORT_RSU));
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ return FW_UPLOAD_ERR_CANCELED;
+}
+
+static enum fw_upload_err bmc_sec_prepare(struct fw_upload *fwl,
+ const u8 *data, u32 size)
+{
+ struct bmc_sec *sec = fwl->dd_handle;
+ u32 ret;
+
+ sec->cancel_request = false;
+
+ if (!size || size & 0x3 || size > M10BMC_STAGING_SIZE)
+ return FW_UPLOAD_ERR_INVALID_SIZE;
+
+ ret = rsu_check_idle(sec);
+ if (ret != FW_UPLOAD_ERR_NONE)
+ return ret;
+
+ ret = rsu_update_init(sec);
+ if (ret != FW_UPLOAD_ERR_NONE)
+ return ret;
+
+ ret = rsu_prog_ready(sec);
+ if (ret != FW_UPLOAD_ERR_NONE)
+ return ret;
+
+ if (sec->cancel_request)
+ return rsu_cancel(sec);
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+#define WRITE_BLOCK_SIZE 0x4000 /* Default write-block size is 0x4000 bytes */
+
+static enum fw_upload_err bmc_sec_write(struct fw_upload *fwl, const u8 *data,
+ u32 offset, u32 size, u32 *written)
+{
+ struct bmc_sec *sec = fwl->dd_handle;
+ unsigned int stride = regmap_get_reg_stride(sec->m10bmc->regmap);
+ u32 blk_size, doorbell;
+ int ret;
+
+ if (sec->cancel_request)
+ return rsu_cancel(sec);
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret) {
+ return FW_UPLOAD_ERR_RW_ERROR;
+ } else if (rsu_prog(doorbell) != RSU_PROG_READY) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_HW_ERROR;
+ }
+
+ blk_size = min_t(u32, WRITE_BLOCK_SIZE, size);
+ ret = regmap_bulk_write(sec->m10bmc->regmap,
+ M10BMC_STAGING_BASE + offset,
+ (void *)data + offset,
+ (blk_size + stride - 1) / stride);
+
+ if (ret)
+ return FW_UPLOAD_ERR_RW_ERROR;
+
+ *written = blk_size;
+ return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err bmc_sec_poll_complete(struct fw_upload *fwl)
+{
+ struct bmc_sec *sec = fwl->dd_handle;
+ unsigned long poll_timeout;
+ u32 doorbell, result;
+ int ret;
+
+ if (sec->cancel_request)
+ return rsu_cancel(sec);
+
+ result = rsu_send_data(sec);
+ if (result != FW_UPLOAD_ERR_NONE)
+ return result;
+
+ poll_timeout = jiffies + msecs_to_jiffies(RSU_COMPLETE_TIMEOUT_MS);
+ do {
+ msleep(RSU_COMPLETE_INTERVAL_MS);
+ ret = rsu_check_complete(sec, &doorbell);
+ } while (ret == -EAGAIN && !time_after(jiffies, poll_timeout));
+
+ if (ret == -EAGAIN) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_TIMEOUT;
+ } else if (ret == -EIO) {
+ return FW_UPLOAD_ERR_RW_ERROR;
+ } else if (ret) {
+ log_error_regs(sec, doorbell);
+ return FW_UPLOAD_ERR_HW_ERROR;
+ }
+
+ return FW_UPLOAD_ERR_NONE;
+}
+
+/*
+ * bmc_sec_cancel() may be called asynchronously with an on-going update.
+ * All other functions are called sequentially in a single thread. To avoid
+ * contention on register accesses, bmc_sec_cancel() must only update
+ * the cancel_request flag. Other functions will check this flag and handle
+ * the cancel request synchronously.
+ */
+static void bmc_sec_cancel(struct fw_upload *fwl)
+{
+ struct bmc_sec *sec = fwl->dd_handle;
+
+ sec->cancel_request = true;
+}
+
+static void bmc_sec_cleanup(struct fw_upload *fwl)
+{
+ struct bmc_sec *sec = fwl->dd_handle;
+
+ (void)rsu_cancel(sec);
+}
+
+static const struct fw_upload_ops cardbmc_ops = {
+ .prepare = bmc_sec_prepare,
+ .write = bmc_sec_write,
+ .poll_complete = bmc_sec_poll_complete,
+ .cancel = bmc_sec_cancel,
+ .cleanup = bmc_sec_cleanup,
+};
+
#define SEC_UPDATE_LEN_MAX 32
static int bmc_sec_probe(struct platform_device *pdev)
{
+ char buf[SEC_UPDATE_LEN_MAX];
+ struct fw_upload *fwl;
+ unsigned int len, ret;
struct bmc_sec *sec;
sec = devm_kzalloc(&pdev->dev, sizeof(*sec), GFP_KERNEL);
@@ -191,6 +537,36 @@ static int bmc_sec_probe(struct platform_device *pdev)
sec->m10bmc = dev_get_drvdata(pdev->dev.parent);
dev_set_drvdata(&pdev->dev, sec);
+ ret = xa_alloc(&fw_upload_xa, &sec->fw_name_id, sec,
+ xa_limit_32b, GFP_KERNEL);
+ if (ret)
+ return ret;
+
+ len = scnprintf(buf, SEC_UPDATE_LEN_MAX, "secure-update%d",
+ sec->fw_name_id);
+ sec->fw_name = kmemdup_nul(buf, len, GFP_KERNEL);
+
+ fwl = firmware_upload_register(THIS_MODULE, sec->dev, sec->fw_name,
+ &cardbmc_ops, sec);
+ if (IS_ERR(fwl)) {
+ dev_err(sec->dev, "Firmware Upload driver failed to start\n");
+ kfree(sec->fw_name);
+ xa_erase(&fw_upload_xa, sec->fw_name_id);
+ return PTR_ERR(fwl);
+ }
+
+ sec->fwl = fwl;
+ return 0;
+}
+
+static int bmc_sec_remove(struct platform_device *pdev)
+{
+ struct bmc_sec *sec = dev_get_drvdata(&pdev->dev);
+
+ firmware_upload_unregister(sec->fwl);
+ kfree(sec->fw_name);
+ xa_erase(&fw_upload_xa, sec->fw_name_id);
+
return 0;
}
@@ -203,6 +579,7 @@ static const struct platform_device_id intel_cardbmc_sec_ids[] = {
static struct platform_driver intel_cardbmc_sec_driver = {
.probe = bmc_sec_probe,
+ .remove = bmc_sec_remove,
.driver = {
.name = "intel-cardbmc-sec-update",
.dev_groups = bmc_sec_attr_groups,
Create firmware upload ops and call the Firmware Upload support of the Firmware Loader subsystem to enable FPGA image uploads for secure updates of BMC images, FPGA images, etc. Signed-off-by: Russ Weight <russell.h.weight@intel.com> --- v18: - Moved the firmware_upload_register() function here from an earlier patch since this is where the required ops are provided. - Moved the bmc_sec_remove() function here from an earlier patch to unregister the firmware driver and do cleanup. v17: - Change "m10bmc" in symbol names to "cardbmc" to reflect the fact that the future devices will not necessarily use the MAX10. - Change from image_load class driver to the new firmware_upload functionality of the firmware_loader. - fw_upload_ops functions will return "enum fw_upload_err" data types instead of integer values. v16: - Use 0 instead of FPGA_IMAGE_ERR_NONE to indicate success. - The size alignment check was moved from the FPGA Image Load framework to the prepare() op. - Added cancel_request boolean flag to struct m10bmc_sec. - Moved the RSU cancellation logic from m10bmc_sec_cancel() to a new rsu_cancel() function. - The m10bmc_sec_cancel() function ONLY sets the cancel_request flag. The cancel_request flag is checked at the beginning of the m10bmc_sec_write() and m10bmc_sec_poll_complete() functions. - Adapt to changed prototypes for the prepare() and write() ops. The m10bmc_sec_write_blk() function has been renamed to m10bmc_sec_write(). - Created a cleanup() op, m10bmc_sec_cleanup(), to attempt to cancel an ongoing op during when exiting the update process. v15: - Adapted to changes in the FPGA Image Load framework: (1) All enum types (progress and errors) are now type u32 (2) m10bmc_sec_write_blk() adds *blk_size and max_size parameters and uses *blk_size as provided by the caller. (3) m10bmc_sec_poll_complete() no long checks the driver_unload flag. v14: - Changed symbol names to reflect the renaming of the Security Manager Class driver to FPGA Image Load. v13: - No change v12: - Updated Date and KernelVersion fields in ABI documentation - Removed size parameter from the write_blk() op. m10bmc_sec_write_blk() no longer has a size parameter, and the block size is determined in this (the lower-level) driver. v11: - No change v10: - No change v9: - No change v8: - Previously patch 5/6, otherwise no change v7: - No change v6: - Changed (size / stride) calculation to ((size + stride - 1) / stride) to ensure that the proper count is passed to regmap_bulk_write(). - Removed unnecessary call to rsu_check_complete() in m10bmc_sec_poll_complete() and changed while loop to do/while loop. v5: - No change v4: - No change v3: - Changed: iops -> sops, imgr -> smgr, IFPGA_ -> FPGA_, ifpga_ to fpga_ - Changed "MAX10 BMC Secure Engine driver" to "MAX10 BMC Secure Update driver" - Removed wrapper functions (m10bmc_raw_*, m10bmc_sys_*). The underlying functions are now called directly. - Changed calling functions of functions that return "enum fpga_sec_err" to check for (ret != FPGA_SEC_ERR_NONE) instead of (ret) v2: - Reworked the rsu_start_done() function to make it more readable - Reworked while-loop condition/content in rsu_prog_ready() - Minor code cleanup per review comments - Added a comment to the m10bmc_sec_poll_complete() function to explain the context (could take 30+ minutes to complete). - Added m10bmc_ prefix to functions in m10bmc_iops structure - Moved MAX10 BMC address and function definitions to a separate patch. --- drivers/fpga/intel-cardbmc-sec-update.c | 377 ++++++++++++++++++++++++ 1 file changed, 377 insertions(+)