| Message ID | 20220531192344.23038-3-i.bornyakov@metrotek.ru (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Microchip Polarfire FPGA manager | expand |
On 31/05/2022 20:23, Ivan Bornyakov wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Add support to the FPGA manager for programming Microchip Polarfire > FPGAs over slave SPI interface with .dat formatted bitsream image. > > Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Hey Ivan, Could've kept at least the R-b tag from v13, but either way: Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> I did have another look at Yiluns two questions. The reason for the double status read effectively boils down to the system controller potentially not having had enough time to process the previous command/frame and update its status yet. And see below about the memcpy()... > --- > drivers/fpga/Kconfig | 9 + > drivers/fpga/Makefile | 1 + > drivers/fpga/microchip-spi.c | 384 +++++++++++++++++++++++++++++++++++ > 3 files changed, 394 insertions(+) > create mode 100644 drivers/fpga/microchip-spi.c > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig > index 26025dbab353..75806ef5c9ea 100644 > --- a/drivers/fpga/Kconfig > +++ b/drivers/fpga/Kconfig > @@ -248,4 +248,13 @@ config FPGA_MGR_VERSAL_FPGA > configure the programmable logic(PL). > > To compile this as a module, choose M here. > + > +config FPGA_MGR_MICROCHIP_SPI > + tristate "Microchip Polarfire SPI FPGA manager" > + depends on SPI > + help > + FPGA manager driver support for Microchip Polarfire FPGAs > + programming over slave SPI interface with .dat formatted > + bitstream image. > + > endif # FPGA > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile > index e32bfa90f968..5425a15892df 100644 > --- a/drivers/fpga/Makefile > +++ b/drivers/fpga/Makefile > @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o > obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o > obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o > obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o > +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o > obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o > obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o > > diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c > new file mode 100644 > index 000000000000..413e5c364f68 ---8<--- > + > +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) > +{ > + u8 tmp_buf[MPF_SPI_FRAME_SIZE + 1] = { MPF_SPI_FRAME, }; > + struct mpf_priv *priv = mgr->priv; > + struct device *dev = &mgr->dev; > + struct spi_device *spi; > + int ret, i; > + > + if (count % MPF_SPI_FRAME_SIZE) { > + dev_err(dev, "Bitstream size is not a multiple of %d\n", > + MPF_SPI_FRAME_SIZE); > + return -EINVAL; > + } > + > + spi = priv->spi; > + > + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { > + memcpy(tmp_buf + 1, buf + i * MPF_SPI_FRAME_SIZE, > + MPF_SPI_FRAME_SIZE); > + > + ret = mpf_spi_write(spi, tmp_buf, sizeof(tmp_buf)); > + if (ret) { > + dev_err(dev, "Failed to write bitstream frame %d/%zu\n", > + i, count / MPF_SPI_FRAME_SIZE); > + return ret; > + } > + } > + > + return 0; > +} I was able to program with the following diff, which is effectively the same as the one you sent (which also worked for me): diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c index 413e5c364f68..fa6220e8056a 100644 --- a/drivers/fpga/microchip-spi.c +++ b/drivers/fpga/microchip-spi.c @@ -268,7 +268,8 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) { - u8 tmp_buf[MPF_SPI_FRAME_SIZE + 1] = { MPF_SPI_FRAME, }; + u8 spi_frame_command = MPF_SPI_FRAME; + struct spi_transfer xfers[2] = { 0 }; struct mpf_priv *priv = mgr->priv; struct device *dev = &mgr->dev; struct spi_device *spi; @@ -282,11 +283,16 @@ static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count spi = priv->spi; + xfers[0].tx_buf = &spi_frame_command; + xfers[0].len = 1; + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { - memcpy(tmp_buf + 1, buf + i * MPF_SPI_FRAME_SIZE, - MPF_SPI_FRAME_SIZE); + xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; + xfers[1].len = MPF_SPI_FRAME_SIZE; - ret = mpf_spi_write(spi, tmp_buf, sizeof(tmp_buf)); + ret = mpf_poll_status(spi, 0); + if (ret >= 0) + ret = spi_sync_transfer(spi, xfers, 2); if (ret) { dev_err(dev, "Failed to write bitstream frame %d/%zu\n", i, count / MPF_SPI_FRAME_SIZE); Have you been able to look at a waveform of programming like this on your hardware? Off the top of my head, I was wondering if your spi controller releases CS between every xfer? Mine is perfectly happy not to release it - which is why I noticed the extra cs_change in mpf_read_status(). Thanks, Conor.
On Wed, Jun 01, 2022 at 07:49:48AM +0000, Conor.Dooley@microchip.com wrote: > On 31/05/2022 20:23, Ivan Bornyakov wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > Add support to the FPGA manager for programming Microchip Polarfire > > FPGAs over slave SPI interface with .dat formatted bitsream image. > > > > Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> > > Hey Ivan, > Could've kept at least the R-b tag from v13, but either way: > Tested-by: Conor Dooley <conor.dooley@microchip.com> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > > I did have another look at Yiluns two questions. > The reason for the double status read effectively boils down > to the system controller potentially not having had enough > time to process the previous command/frame and update its > status yet. > > And see below about the memcpy()... > > > --- > > drivers/fpga/Kconfig | 9 + > > drivers/fpga/Makefile | 1 + > > drivers/fpga/microchip-spi.c | 384 +++++++++++++++++++++++++++++++++++ > > 3 files changed, 394 insertions(+) > > create mode 100644 drivers/fpga/microchip-spi.c > > > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig > > index 26025dbab353..75806ef5c9ea 100644 > > --- a/drivers/fpga/Kconfig > > +++ b/drivers/fpga/Kconfig > > @@ -248,4 +248,13 @@ config FPGA_MGR_VERSAL_FPGA > > configure the programmable logic(PL). > > > > To compile this as a module, choose M here. > > + > > +config FPGA_MGR_MICROCHIP_SPI > > + tristate "Microchip Polarfire SPI FPGA manager" > > + depends on SPI > > + help > > + FPGA manager driver support for Microchip Polarfire FPGAs > > + programming over slave SPI interface with .dat formatted > > + bitstream image. > > + > > endif # FPGA > > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile > > index e32bfa90f968..5425a15892df 100644 > > --- a/drivers/fpga/Makefile > > +++ b/drivers/fpga/Makefile > > @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o > > obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o > > obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o > > obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o > > +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o > > obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o > > obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o > > > > diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c > > new file mode 100644 > > index 000000000000..413e5c364f68 > ---8<--- > > + > > +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) > > +{ > > + u8 tmp_buf[MPF_SPI_FRAME_SIZE + 1] = { MPF_SPI_FRAME, }; > > + struct mpf_priv *priv = mgr->priv; > > + struct device *dev = &mgr->dev; > > + struct spi_device *spi; > > + int ret, i; > > + > > + if (count % MPF_SPI_FRAME_SIZE) { > > + dev_err(dev, "Bitstream size is not a multiple of %d\n", > > + MPF_SPI_FRAME_SIZE); > > + return -EINVAL; > > + } > > + > > + spi = priv->spi; > > + > > + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { > > + memcpy(tmp_buf + 1, buf + i * MPF_SPI_FRAME_SIZE, > > + MPF_SPI_FRAME_SIZE); > > + > > + ret = mpf_spi_write(spi, tmp_buf, sizeof(tmp_buf)); > > + if (ret) { > > + dev_err(dev, "Failed to write bitstream frame %d/%zu\n", > > + i, count / MPF_SPI_FRAME_SIZE); > > + return ret; > > + } > > + } > > + > > + return 0; > > +} > > I was able to program with the following diff, which is effectively > the same as the one you sent (which also worked for me): > > diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c > index 413e5c364f68..fa6220e8056a 100644 > --- a/drivers/fpga/microchip-spi.c > +++ b/drivers/fpga/microchip-spi.c > @@ -268,7 +268,8 @@ static int mpf_ops_write_init(struct fpga_manager *mgr, > > static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) > { > - u8 tmp_buf[MPF_SPI_FRAME_SIZE + 1] = { MPF_SPI_FRAME, }; > + u8 spi_frame_command = MPF_SPI_FRAME; > + struct spi_transfer xfers[2] = { 0 }; > struct mpf_priv *priv = mgr->priv; > struct device *dev = &mgr->dev; > struct spi_device *spi; > @@ -282,11 +283,16 @@ static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count > > spi = priv->spi; > > + xfers[0].tx_buf = &spi_frame_command; > + xfers[0].len = 1; > + > for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { > - memcpy(tmp_buf + 1, buf + i * MPF_SPI_FRAME_SIZE, > - MPF_SPI_FRAME_SIZE); > + xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; > + xfers[1].len = MPF_SPI_FRAME_SIZE; > > - ret = mpf_spi_write(spi, tmp_buf, sizeof(tmp_buf)); > + ret = mpf_poll_status(spi, 0); > + if (ret >= 0) > + ret = spi_sync_transfer(spi, xfers, 2); > if (ret) { > dev_err(dev, "Failed to write bitstream frame %d/%zu\n", > i, count / MPF_SPI_FRAME_SIZE); > > Have you been able to look at a waveform of programming like this > on your hardware? Off the top of my head, I was wondering if your > spi controller releases CS between every xfer? > Mine is perfectly happy not to release it - which is why I noticed > the extra cs_change in mpf_read_status(). > > Thanks, > Conor. > Thanks for the hint. I'll ask our HW folks if it's possible.
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 26025dbab353..75806ef5c9ea 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -248,4 +248,13 @@ config FPGA_MGR_VERSAL_FPGA configure the programmable logic(PL). To compile this as a module, choose M here. + +config FPGA_MGR_MICROCHIP_SPI + tristate "Microchip Polarfire SPI FPGA manager" + depends on SPI + help + FPGA manager driver support for Microchip Polarfire FPGAs + programming over slave SPI interface with .dat formatted + bitstream image. + endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index e32bfa90f968..5425a15892df 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c new file mode 100644 index 000000000000..413e5c364f68 --- /dev/null +++ b/drivers/fpga/microchip-spi.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip Polarfire FPGA programming over slave SPI interface. + */ + +#include <asm/unaligned.h> +#include <linux/delay.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spi/spi.h> + +#define MPF_SPI_ISC_ENABLE 0x0B +#define MPF_SPI_ISC_DISABLE 0x0C +#define MPF_SPI_READ_STATUS 0x00 +#define MPF_SPI_READ_DATA 0x01 +#define MPF_SPI_FRAME_INIT 0xAE +#define MPF_SPI_FRAME 0xEE +#define MPF_SPI_PRG_MODE 0x01 +#define MPF_SPI_RELEASE 0x23 + +#define MPF_SPI_FRAME_SIZE 16 + +#define MPF_HEADER_SIZE_OFFSET 24 +#define MPF_DATA_SIZE_OFFSET 55 + +#define MPF_LOOKUP_TABLE_RECORD_SIZE 9 +#define MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET 0 +#define MPF_LOOKUP_TABLE_BLOCK_START_OFFSET 1 + +#define MPF_COMPONENTS_SIZE_ID 5 +#define MPF_BITSTREAM_ID 8 + +#define MPF_BITS_PER_COMPONENT_SIZE 22 + +#define MPF_STATUS_POLL_RETRIES 10000 +#define MPF_STATUS_BUSY BIT(0) +#define MPF_STATUS_READY BIT(1) +#define MPF_STATUS_SPI_VIOLATION BIT(2) +#define MPF_STATUS_SPI_ERROR BIT(3) + +struct mpf_priv { + struct spi_device *spi; + bool program_mode; +}; + +static int mpf_read_status(struct spi_device *spi) +{ + u8 status = 0, status_command = MPF_SPI_READ_STATUS; + struct spi_transfer xfers[2] = { 0 }; + int ret; + + /* + * HW status is returned on MISO in the first byte after CS went + * active. However, first reading can be inadequate, so we submit + * two identical SPI transfers and use result of the later one. + */ + xfers[0].tx_buf = xfers[1].tx_buf = &status_command; + xfers[0].rx_buf = xfers[1].rx_buf = &status; + xfers[0].len = xfers[1].len = 1; + xfers[0].cs_change = 1; + + ret = spi_sync_transfer(spi, xfers, 2); + + if ((status & MPF_STATUS_SPI_VIOLATION) || + (status & MPF_STATUS_SPI_ERROR)) + ret = -EIO; + + return ret ? : status; +} + +static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr) +{ + struct mpf_priv *priv = mgr->priv; + struct spi_device *spi; + bool program_mode; + int status; + + spi = priv->spi; + program_mode = priv->program_mode; + status = mpf_read_status(spi); + + if (!program_mode && !status) + return FPGA_MGR_STATE_OPERATING; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static int mpf_ops_parse_header(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + size_t component_size_byte_num, component_size_byte_off, + block_id_offset, block_start_offset; + u8 header_size, blocks_num, block_id; + u32 block_start, component_size, i, + components_size_start = 0, + bitstream_start = 0; + u16 components_num; + + if (!buf) { + dev_err(&mgr->dev, "Image buffer is not provided\n"); + return -EINVAL; + } + + header_size = *(buf + MPF_HEADER_SIZE_OFFSET); + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + /* + * Go through look-up table to find out where actual bitstream starts + * and where sizes of components of the bitstream lies. + */ + blocks_num = *(buf + header_size - 1); + block_id_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET; + block_start_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_START_OFFSET; + + header_size += blocks_num * MPF_LOOKUP_TABLE_RECORD_SIZE; + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + while (blocks_num--) { + block_id = *(buf + block_id_offset); + block_start = get_unaligned_le32(buf + block_start_offset); + + switch (block_id) { + case MPF_BITSTREAM_ID: + info->header_size = bitstream_start = block_start; + if (block_start > count) + return -EAGAIN; + + break; + case MPF_COMPONENTS_SIZE_ID: + components_size_start = block_start; + break; + default: + break; + } + + if (bitstream_start && components_size_start) + break; + + block_id_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + block_start_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + } + + if (!bitstream_start || !components_size_start) { + dev_err(&mgr->dev, "Failed to parse header look-up table\n"); + return -EFAULT; + } + + /* + * Parse bitstream size. + * Sizes of components of the bitstream are 22-bits long placed next + * to each other. Image header should be extended by now up to where + * actual bitstream starts, so no need for overflow check anymore. + */ + components_num = get_unaligned_le16(buf + MPF_DATA_SIZE_OFFSET); + + for (i = 0; i < components_num; i++) { + component_size_byte_num = + (i * MPF_BITS_PER_COMPONENT_SIZE) / BITS_PER_BYTE; + component_size_byte_off = + (i * MPF_BITS_PER_COMPONENT_SIZE) % BITS_PER_BYTE; + + component_size = get_unaligned_le32(buf + + components_size_start + + component_size_byte_num); + component_size >>= component_size_byte_off; + component_size &= GENMASK(MPF_BITS_PER_COMPONENT_SIZE - 1, 0); + + info->data_size += component_size * MPF_SPI_FRAME_SIZE; + } + + return 0; +} + +/* Poll HW status until busy bit is cleared and mask bits are set. */ +static int mpf_poll_status(struct spi_device *spi, u8 mask) +{ + int status, retries = MPF_STATUS_POLL_RETRIES; + + while (retries--) { + status = mpf_read_status(spi); + if (status < 0) + return status; + + if (status & MPF_STATUS_BUSY) + continue; + + if (!mask || (status & mask)) + return status; + } + + return -EBUSY; +} + +static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size) +{ + int status = mpf_poll_status(spi, 0); + + if (status < 0) + return status; + + return spi_write(spi, buf, buf_size); +} + +static int mpf_spi_write_then_read(struct spi_device *spi, + const void *txbuf, size_t txbuf_size, + void *rxbuf, size_t rxbuf_size) +{ + const u8 read_command[] = { MPF_SPI_READ_DATA }; + int ret; + + ret = mpf_spi_write(spi, txbuf, txbuf_size); + if (ret) + return ret; + + ret = mpf_poll_status(spi, MPF_STATUS_READY); + if (ret < 0) + return ret; + + return spi_write_then_read(spi, read_command, sizeof(read_command), + rxbuf, rxbuf_size); +} + +static int mpf_ops_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, const char *buf, + size_t count) +{ + const u8 program_mode[] = { MPF_SPI_FRAME_INIT, MPF_SPI_PRG_MODE }; + const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + u32 isc_ret = 0; + int ret; + + if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { + dev_err(dev, "Partial reconfiguration is not supported\n"); + return -EOPNOTSUPP; + } + + spi = priv->spi; + + ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command), + &isc_ret, sizeof(isc_ret)); + if (ret || isc_ret) { + dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n", + ret, isc_ret); + return -EFAULT; + } + + ret = mpf_spi_write(spi, program_mode, sizeof(program_mode)); + if (ret) { + dev_err(dev, "Failed to enter program mode: %d\n", ret); + return ret; + } + + priv->program_mode = true; + + return 0; +} + +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) +{ + u8 tmp_buf[MPF_SPI_FRAME_SIZE + 1] = { MPF_SPI_FRAME, }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret, i; + + if (count % MPF_SPI_FRAME_SIZE) { + dev_err(dev, "Bitstream size is not a multiple of %d\n", + MPF_SPI_FRAME_SIZE); + return -EINVAL; + } + + spi = priv->spi; + + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { + memcpy(tmp_buf + 1, buf + i * MPF_SPI_FRAME_SIZE, + MPF_SPI_FRAME_SIZE); + + ret = mpf_spi_write(spi, tmp_buf, sizeof(tmp_buf)); + if (ret) { + dev_err(dev, "Failed to write bitstream frame %d/%zu\n", + i, count / MPF_SPI_FRAME_SIZE); + return ret; + } + } + + return 0; +} + +static int mpf_ops_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + const u8 isc_dis_command[] = { MPF_SPI_ISC_DISABLE }; + const u8 release_command[] = { MPF_SPI_RELEASE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret; + + spi = priv->spi; + + ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command)); + if (ret) { + dev_err(dev, "Failed to disable ISC: %d\n", ret); + return ret; + } + + usleep_range(1000, 2000); + + ret = mpf_spi_write(spi, release_command, sizeof(release_command)); + if (ret) { + dev_err(dev, "Failed to exit program mode: %d\n", ret); + return ret; + } + + priv->program_mode = false; + + return 0; +} + +static const struct fpga_manager_ops mpf_ops = { + .state = mpf_ops_state, + .initial_header_size = 71, + .parse_header = mpf_ops_parse_header, + .write_init = mpf_ops_write_init, + .write = mpf_ops_write, + .write_complete = mpf_ops_write_complete, +}; + +static int mpf_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct fpga_manager *mgr; + struct mpf_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi = spi; + + mgr = devm_fpga_mgr_register(dev, "Microchip Polarfire SPI FPGA Manager", + &mpf_ops, priv); + + return PTR_ERR_OR_ZERO(mgr); +} + +static const struct spi_device_id mpf_spi_ids[] = { + { .name = "mpf-spi-fpga-mgr", }, + {}, +}; +MODULE_DEVICE_TABLE(spi, mpf_spi_ids); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mpf_of_ids[] = { + { .compatible = "microchip,mpf-spi-fpga-mgr" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpf_of_ids); +#endif /* IS_ENABLED(CONFIG_OF) */ + +static struct spi_driver mpf_driver = { + .probe = mpf_probe, + .id_table = mpf_spi_ids, + .driver = { + .name = "microchip_mpf_spi_fpga_mgr", + .of_match_table = of_match_ptr(mpf_of_ids), + }, +}; + +module_spi_driver(mpf_driver); + +MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager"); +MODULE_LICENSE("GPL");
Add support to the FPGA manager for programming Microchip Polarfire FPGAs over slave SPI interface with .dat formatted bitsream image. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> --- drivers/fpga/Kconfig | 9 + drivers/fpga/Makefile | 1 + drivers/fpga/microchip-spi.c | 384 +++++++++++++++++++++++++++++++++++ 3 files changed, 394 insertions(+) create mode 100644 drivers/fpga/microchip-spi.c