@@ -948,6 +948,39 @@ int zynqmp_pm_fpga_get_status(u32 *value)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
+/**
+ * zynqmp_pm_fpga_get_config_status - Get the FPGA configuration status.
+ * @value: Buffer to store FPGA configuration status.
+ *
+ * This function provides access to the pmufw to get the FPGA configuration
+ * status
+ *
+ * Return: 0 on success, a negative value on error
+ */
+int zynqmp_pm_fpga_get_config_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ u32 buf, lower_addr, upper_addr;
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ lower_addr = lower_32_bits((u64)&buf);
+ upper_addr = upper_32_bits((u64)&buf);
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_READ,
+ XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET,
+ lower_addr, upper_addr,
+ XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG,
+ ret_payload);
+
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_config_status);
+
/**
* zynqmp_pm_pinctrl_request - Request Pin from firmware
* @pin: Pin number to request
@@ -71,6 +71,10 @@
#define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U
#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+/* FPGA Status Reg */
+#define XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET 7U
+#define XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG 0U
+
/*
* Node IDs for the Error Events.
*/
@@ -120,6 +124,7 @@ enum pm_api_id {
PM_CLOCK_GETRATE = 42,
PM_CLOCK_SETPARENT = 43,
PM_CLOCK_GETPARENT = 44,
+ PM_FPGA_READ = 46,
PM_SECURE_AES = 47,
PM_FEATURE_CHECK = 63,
};
@@ -515,6 +520,7 @@ int zynqmp_pm_aes_engine(const u64 address, u32 *out);
int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags);
int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags);
int zynqmp_pm_fpga_get_status(u32 *value);
+int zynqmp_pm_fpga_get_config_status(u32 *value);
int zynqmp_pm_write_ggs(u32 index, u32 value);
int zynqmp_pm_read_ggs(u32 index, u32 *value);
int zynqmp_pm_write_pggs(u32 index, u32 value);
@@ -721,6 +727,11 @@ static inline int zynqmp_pm_fpga_get_status(u32 *value)
return -ENODEV;
}
+static inline int zynqmp_pm_fpga_get_config_status(u32 *value)
+{
+ return -ENODEV;
+}
+
static inline int zynqmp_pm_write_ggs(u32 index, u32 value)
{
return -ENODEV;
Adds PM API for performing Programmable Logic(PL) configuration register readback. It provides an interface to the firmware(pmufw) to readback the FPGA configuration register. Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com> --- changes for v2: - None. Changes for v3: - Updated API and config reg read-back handling logic - Updated the commit msg to align with the changes. Changes for v4: - Fixed some minor coding issues. No functional changes. - Updated Return value comments as suggested by Xu Yilun. Changes for v5: - Fixed some minor coding issues as suggested by Xu Yilun. No functional changes. Changes for v6: - None. drivers/firmware/xilinx/zynqmp.c | 33 ++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 11 ++++++++++ 2 files changed, 44 insertions(+)