diff mbox series

[v2] dt-bindings: fpga: xilinx-pr-decoupler: convert bindings to json-schema

Message ID 20230221115012.3468798-1-nava.kishore.manne@amd.com (mailing list archive)
State New
Headers show
Series [v2] dt-bindings: fpga: xilinx-pr-decoupler: convert bindings to json-schema | expand

Commit Message

Manne, Nava kishore Feb. 21, 2023, 11:50 a.m. UTC
Convert xilinx-pr-decoupler bindings to DT schema format using json-schema

Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
---
Changes for v2:
              - Updated the description and addressed some minor comments
                as suggested by Krzysztof.

 .../bindings/fpga/xilinx-pr-decoupler.txt     | 54 --------------
 .../bindings/fpga/xlnx,pr-decoupler.yaml      | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 54 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml

Comments

Krzysztof Kozlowski Feb. 22, 2023, 9:24 a.m. UTC | #1
On 21/02/2023 12:50, Nava kishore Manne wrote:
> Convert xilinx-pr-decoupler bindings to DT schema format using json-schema
> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
> Changes for v2:
>               - Updated the description and addressed some minor comments
>                 as suggested by Krzysztof.
> 
>  .../bindings/fpga/xilinx-pr-decoupler.txt     | 54 --------------
>  .../bindings/fpga/xlnx,pr-decoupler.yaml      | 71 +++++++++++++++++++
>  2 files changed, 71 insertions(+), 54 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> deleted file mode 100644
> index 0acdfa6d62a4..000000000000
> --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> -
> -The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> -decouplers / fpga bridges.
> -The controller can decouple/disable the bridges which prevents signal
> -changes from passing through the bridge.  The controller can also
> -couple / enable the bridges which allows traffic to pass through the
> -bridge normally.
> -
> -Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
> -Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
> -
> -The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
> -from passing through the bridge. The controller safely handles AXI4MM
> -and AXI4-Lite interfaces on a Reconfigurable Partition when it is
> -undergoing dynamic reconfiguration, preventing the system deadlock
> -that can occur if AXI transactions are interrupted by DFX
> -
> -The Driver supports only MMIO handling. A PR region can have multiple
> -PR Decouplers which can be handled independently or chained via decouple/
> -decouple_status signals.
> -
> -Required properties:
> -- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
> -                          "xlnx,pr-decoupler" or
> -                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
> -                          "xlnx,dfx-axi-shutdown-manager"
> -- regs			: base address and size for decoupler module
> -- clocks		: input clock to IP
> -- clock-names		: should contain "aclk"
> -
> -See Documentation/devicetree/bindings/fpga/fpga-region.txt and
> -Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
> -
> -Example:
> -Partial Reconfig Decoupler:
> -	fpga-bridge@100000450 {
> -		compatible = "xlnx,pr-decoupler-1.00",
> -			     "xlnx-pr-decoupler";
> -		regs = <0x10000045 0x10>;
> -		clocks = <&clkc 15>;
> -		clock-names = "aclk";
> -		bridge-enable = <0>;
> -	};
> -
> -Dynamic Function eXchange AXI shutdown manager:
> -	fpga-bridge@100000450 {
> -		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
> -			     "xlnx,dfx-axi-shutdown-manager";
> -		regs = <0x10000045 0x10>;
> -		clocks = <&clkc 15>;
> -		clock-names = "aclk";
> -		bridge-enable = <0>;
> -	};
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> new file mode 100644
> index 000000000000..4a08d4bfa20d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
> +
> +maintainers:
> +  - Nava kishore Manne <nava.kishore.manne@amd.com>
> +
> +description: The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more

Blank line before text... don't use your own style. Use style consistent
with the project.

> +  decouplers / fpga bridges. The controller can decouple/disable the bridges
> +  which prevents signal changes from passing through the bridge.  The controller
> +  can also couple / enable the bridges which allows traffic to pass through the
> +  bridge normally.
> +  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
> +  is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
> +  eXchange AXI shutdown manager prevents AXI traffic from passing through the
> +  bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
> +  Reconfigurable Partition when it is undergoing dynamic reconfiguration,
> +  preventing the system deadlock that can occur if AXI transactions are
> +  interrupted by DFX.
> +  Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
> +  common binding part and usage.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: xlnx,pr-decoupler-1.00 #For PR-Decoupler.

Drop the comment, it duplicates the compatible. There is no point in it.

> +          - const: xlnx,pr-decoupler
> +      - items:
> +          - const: xlnx,dfx-axi-shutdown-manager-1.00 #For AXI shutdown manager.

Ditto

> +          - const: xlnx,dfx-axi-shutdown-manager
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +
> +  bridge-enable:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +    description:
> +      Zero if driver should disable bridge at startup. One if driver should
> +      enable bridge at startup. Default is to leave bridge in current state.

This property wasn't in original binding. Even though it is
fpga-bridge.txt, why do you need it? It's not used. Also, do not
describe driver but rather hardware.


Best regards,
Krzysztof
Manne, Nava kishore Feb. 23, 2023, 5:12 a.m. UTC | #2
Hi Krzysztof,

	Thanks for providing the review comments.
Please find my response inline below.

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Wednesday, February 22, 2023 2:54 PM
> To: Manne, Nava kishore <nava.kishore.manne@amd.com>;
> mdf@kernel.org; hao.wu@intel.com; yilun.xu@intel.com; trix@redhat.com;
> robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> michal.simek@xilinx.com; linux-fpga@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH v2] dt-bindings: fpga: xilinx-pr-decoupler: convert
> bindings to json-schema
> 
> On 21/02/2023 12:50, Nava kishore Manne wrote:
> > Convert xilinx-pr-decoupler bindings to DT schema format using
> > json-schema
> >
> > Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> > ---
> > Changes for v2:
> >               - Updated the description and addressed some minor comments
> >                 as suggested by Krzysztof.
> >
> >  .../bindings/fpga/xilinx-pr-decoupler.txt     | 54 --------------
> >  .../bindings/fpga/xlnx,pr-decoupler.yaml      | 71 +++++++++++++++++++
> >  2 files changed, 71 insertions(+), 54 deletions(-)  delete mode
> > 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > deleted file mode 100644
> > index 0acdfa6d62a4..000000000000
> > --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > +++ /dev/null
> > @@ -1,54 +0,0 @@
> > -Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> > -
> > -The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> > -decouplers / fpga bridges.
> > -The controller can decouple/disable the bridges which prevents signal
> > -changes from passing through the bridge.  The controller can also
> > -couple / enable the bridges which allows traffic to pass through the
> > -bridge normally.
> > -
> > -Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
> > -Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
> > -
> > -The Dynamic Function eXchange AXI shutdown manager prevents AXI
> > traffic -from passing through the bridge. The controller safely
> > handles AXI4MM -and AXI4-Lite interfaces on a Reconfigurable Partition
> > when it is -undergoing dynamic reconfiguration, preventing the system
> > deadlock -that can occur if AXI transactions are interrupted by DFX
> > -
> > -The Driver supports only MMIO handling. A PR region can have multiple
> > -PR Decouplers which can be handled independently or chained via
> > decouple/ -decouple_status signals.
> > -
> > -Required properties:
> > -- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed
> by
> > -                          "xlnx,pr-decoupler" or
> > -                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
> > -                          "xlnx,dfx-axi-shutdown-manager"
> > -- regs			: base address and size for decoupler module
> > -- clocks		: input clock to IP
> > -- clock-names		: should contain "aclk"
> > -
> > -See Documentation/devicetree/bindings/fpga/fpga-region.txt and
> > -Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic
> bindings.
> > -
> > -Example:
> > -Partial Reconfig Decoupler:
> > -	fpga-bridge@100000450 {
> > -		compatible = "xlnx,pr-decoupler-1.00",
> > -			     "xlnx-pr-decoupler";
> > -		regs = <0x10000045 0x10>;
> > -		clocks = <&clkc 15>;
> > -		clock-names = "aclk";
> > -		bridge-enable = <0>;
> > -	};
> > -
> > -Dynamic Function eXchange AXI shutdown manager:
> > -	fpga-bridge@100000450 {
> > -		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
> > -			     "xlnx,dfx-axi-shutdown-manager";
> > -		regs = <0x10000045 0x10>;
> > -		clocks = <&clkc 15>;
> > -		clock-names = "aclk";
> > -		bridge-enable = <0>;
> > -	};
> > diff --git
> > a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> > b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> > new file mode 100644
> > index 000000000000..4a08d4bfa20d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
> > @@ -0,0 +1,71 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown
> > +manager Softcore
> > +
> > +maintainers:
> > +  - Nava kishore Manne <nava.kishore.manne@amd.com>
> > +
> > +description: The Xilinx LogiCORE Partial Reconfig Decoupler manages
> > +one or more
> 
> Blank line before text... don't use your own style. Use style consistent with
> the project.
> 
> > +  decouplers / fpga bridges. The controller can decouple/disable the
> > + bridges  which prevents signal changes from passing through the
> > + bridge.  The controller  can also couple / enable the bridges which
> > + allows traffic to pass through the  bridge normally.
> > +  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
> > + Softcore  is compatible with the Xilinx LogiCORE pr-decoupler. The
> > + Dynamic Function  eXchange AXI shutdown manager prevents AXI traffic
> > + from passing through the  bridge. The controller safely handles
> > + AXI4MM and AXI4-Lite interfaces on a  Reconfigurable Partition when
> > + it is undergoing dynamic reconfiguration,  preventing the system
> > + deadlock that can occur if AXI transactions are  interrupted by DFX.
> > +  Please refer to fpga-region.txt and fpga-bridge.txt in this
> > + directory for  common binding part and usage.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - const: xlnx,pr-decoupler-1.00 #For PR-Decoupler.
> 
> Drop the comment, it duplicates the compatible. There is no point in it.
> 
> > +          - const: xlnx,pr-decoupler
> > +      - items:
> > +          - const: xlnx,dfx-axi-shutdown-manager-1.00 #For AXI shutdown
> manager.
> 
> Ditto
> 
> > +          - const: xlnx,dfx-axi-shutdown-manager
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aclk
> > +
> > +  bridge-enable:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [0, 1]
> > +    description:
> > +      Zero if driver should disable bridge at startup. One if driver should
> > +      enable bridge at startup. Default is to leave bridge in current state.
> 
> This property wasn't in original binding. Even though it is fpga-bridge.txt, why
> do you need it? It's not used. Also, do not describe driver but rather
> hardware.

I agree, this is not relevant to the H/W property.
Will drop this in v3.

Regards,
Navakishore.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
deleted file mode 100644
index 0acdfa6d62a4..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ /dev/null
@@ -1,54 +0,0 @@ 
-Xilinx LogiCORE Partial Reconfig Decoupler Softcore
-
-The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
-decouplers / fpga bridges.
-The controller can decouple/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-couple / enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
-Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
-
-The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
-from passing through the bridge. The controller safely handles AXI4MM
-and AXI4-Lite interfaces on a Reconfigurable Partition when it is
-undergoing dynamic reconfiguration, preventing the system deadlock
-that can occur if AXI transactions are interrupted by DFX
-
-The Driver supports only MMIO handling. A PR region can have multiple
-PR Decouplers which can be handled independently or chained via decouple/
-decouple_status signals.
-
-Required properties:
-- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
-                          "xlnx,pr-decoupler" or
-                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
-                          "xlnx,dfx-axi-shutdown-manager"
-- regs			: base address and size for decoupler module
-- clocks		: input clock to IP
-- clock-names		: should contain "aclk"
-
-See Documentation/devicetree/bindings/fpga/fpga-region.txt and
-Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-Partial Reconfig Decoupler:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,pr-decoupler-1.00",
-			     "xlnx-pr-decoupler";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
-
-Dynamic Function eXchange AXI shutdown manager:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
-			     "xlnx,dfx-axi-shutdown-manager";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
new file mode 100644
index 000000000000..4a08d4bfa20d
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
@@ -0,0 +1,71 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
+  decouplers / fpga bridges. The controller can decouple/disable the bridges
+  which prevents signal changes from passing through the bridge.  The controller
+  can also couple / enable the bridges which allows traffic to pass through the
+  bridge normally.
+  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
+  is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
+  eXchange AXI shutdown manager prevents AXI traffic from passing through the
+  bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
+  Reconfigurable Partition when it is undergoing dynamic reconfiguration,
+  preventing the system deadlock that can occur if AXI transactions are
+  interrupted by DFX.
+  Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
+  common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: xlnx,pr-decoupler-1.00 #For PR-Decoupler.
+          - const: xlnx,pr-decoupler
+      - items:
+          - const: xlnx,dfx-axi-shutdown-manager-1.00 #For AXI shutdown manager.
+          - const: xlnx,dfx-axi-shutdown-manager
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+  bridge-enable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Zero if driver should disable bridge at startup. One if driver should
+      enable bridge at startup. Default is to leave bridge in current state.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+      compatible = "xlnx,pr-decoupler-1.00", "xlnx,pr-decoupler";
+      reg = <0x10000045 0x10>;
+      clocks = <&clkc 15>;
+      clock-names = "aclk";
+      bridge-enable = <0>;
+    };
+...