diff mbox

[RFC,V2,05/11] ext4: Decrypt all boundary blocks when doing buffered write

Message ID 20180212094347.22071-6-chandan@linux.vnet.ibm.com (mailing list archive)
State Superseded
Headers show

Commit Message

Chandan Rajendra Feb. 12, 2018, 9:43 a.m. UTC
With block size < page size, ext4_block_write_begin() can have up to two
blocks to decrypt. Hence this commit invokes fscrypt_decrypt_block() for
each of those blocks.

Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
---
 fs/ext4/inode.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

Comments

Eric Biggers Feb. 21, 2018, 1:01 a.m. UTC | #1
Hi Chandan,

On Mon, Feb 12, 2018 at 03:13:41PM +0530, Chandan Rajendra wrote:
> With block size < page size, ext4_block_write_begin() can have up to two
> blocks to decrypt. Hence this commit invokes fscrypt_decrypt_block() for
> each of those blocks.
> 
> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
> ---
>  fs/ext4/inode.c | 33 +++++++++++++++++++++++----------
>  1 file changed, 23 insertions(+), 10 deletions(-)
> 
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 69a4fd6..180dd2d 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -1158,12 +1158,13 @@ static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
>  	unsigned to = from + len;
>  	struct inode *inode = page->mapping->host;
>  	unsigned block_start, block_end;
> -	sector_t block;
> +	sector_t block, page_blk_nr;
>  	int err = 0;
>  	unsigned blocksize = inode->i_sb->s_blocksize;
>  	unsigned bbits;
>  	struct buffer_head *bh, *head, *wait[2], **wait_bh = wait;
>  	bool decrypt = false;
> +	int i;
>  
>  	BUG_ON(!PageLocked(page));
>  	BUG_ON(from > PAGE_SIZE);
> @@ -1224,18 +1225,30 @@ static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
>  	/*
>  	 * If we issued read requests, let them complete.
>  	 */
> -	while (wait_bh > wait) {
> -		wait_on_buffer(*--wait_bh);
> -		if (!buffer_uptodate(*wait_bh))
> +	for (i = 0; &wait[i] < wait_bh; i++) {
> +		wait_on_buffer(wait[i]);
> +		if (!buffer_uptodate(wait[i]))
>  			err = -EIO;
> 	}

[...]

> +		for (i = 0; &wait[i] < wait_bh; i++) {
> +			int err2;
> +
> +			--wait_bh;
> +			block = page_blk_nr + (bh_offset(wait[i]) >> bbits);
> +			err2 = fscrypt_decrypt_block(page->mapping->host, page,
> +						wait[i]->b_size,
> +						bh_offset(wait[i]),
> +						block);
> +			if (err2) {
> +				clear_buffer_uptodate(wait[i]);
> +				err = err2;
> +			}
> +		}

These are very confusing ways to iterate through an array, especially the second
loop which is actually going in reverse order (why?).  Why not just use a
variable like 'nr_wait' for the number of valid buffer_head's like I had
suggested?  Then you can just do 'for (i = 0; i < nr_wait; i++)'.

- Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-fscrypt" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chandan Rajendra Feb. 21, 2018, 9:57 a.m. UTC | #2
On Wednesday, February 21, 2018 6:31:55 AM IST Eric Biggers wrote:
> Hi Chandan,
> 
> On Mon, Feb 12, 2018 at 03:13:41PM +0530, Chandan Rajendra wrote:
> > With block size < page size, ext4_block_write_begin() can have up to two
> > blocks to decrypt. Hence this commit invokes fscrypt_decrypt_block() for
> > each of those blocks.
> > 
> > Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
> > ---
> >  fs/ext4/inode.c | 33 +++++++++++++++++++++++----------
> >  1 file changed, 23 insertions(+), 10 deletions(-)
> > 
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 69a4fd6..180dd2d 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -1158,12 +1158,13 @@ static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
> >  	unsigned to = from + len;
> >  	struct inode *inode = page->mapping->host;
> >  	unsigned block_start, block_end;
> > -	sector_t block;
> > +	sector_t block, page_blk_nr;
> >  	int err = 0;
> >  	unsigned blocksize = inode->i_sb->s_blocksize;
> >  	unsigned bbits;
> >  	struct buffer_head *bh, *head, *wait[2], **wait_bh = wait;
> >  	bool decrypt = false;
> > +	int i;
> >  
> >  	BUG_ON(!PageLocked(page));
> >  	BUG_ON(from > PAGE_SIZE);
> > @@ -1224,18 +1225,30 @@ static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
> >  	/*
> >  	 * If we issued read requests, let them complete.
> >  	 */
> > -	while (wait_bh > wait) {
> > -		wait_on_buffer(*--wait_bh);
> > -		if (!buffer_uptodate(*wait_bh))
> > +	for (i = 0; &wait[i] < wait_bh; i++) {
> > +		wait_on_buffer(wait[i]);
> > +		if (!buffer_uptodate(wait[i]))
> >  			err = -EIO;
> > 	}
> 
> [...]
> 
> > +		for (i = 0; &wait[i] < wait_bh; i++) {
> > +			int err2;
> > +
> > +			--wait_bh;
> > +			block = page_blk_nr + (bh_offset(wait[i]) >> bbits);
> > +			err2 = fscrypt_decrypt_block(page->mapping->host, page,
> > +						wait[i]->b_size,
> > +						bh_offset(wait[i]),
> > +						block);
> > +			if (err2) {
> > +				clear_buffer_uptodate(wait[i]);
> > +				err = err2;
> > +			}
> > +		}
> 
> These are very confusing ways to iterate through an array, especially the second
> loop which is actually going in reverse order (why?).  Why not just use a
> variable like 'nr_wait' for the number of valid buffer_head's like I had
> suggested?  Then you can just do 'for (i = 0; i < nr_wait; i++)'.
> 

Sorry, the "--wait_bh;" part was a remanent from the "RFC PATCH V1". Without
that statement, we loop in increasing order of elements in wait[] array. I
will use the 'nr_wait' counter approach and post the next version of the
patchset.  I misunderstood your advice to mean that the code should use
similar looping order in both loops.
diff mbox

Patch

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 69a4fd6..180dd2d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1158,12 +1158,13 @@  static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
 	unsigned to = from + len;
 	struct inode *inode = page->mapping->host;
 	unsigned block_start, block_end;
-	sector_t block;
+	sector_t block, page_blk_nr;
 	int err = 0;
 	unsigned blocksize = inode->i_sb->s_blocksize;
 	unsigned bbits;
 	struct buffer_head *bh, *head, *wait[2], **wait_bh = wait;
 	bool decrypt = false;
+	int i;
 
 	BUG_ON(!PageLocked(page));
 	BUG_ON(from > PAGE_SIZE);
@@ -1224,18 +1225,30 @@  static int ext4_block_write_begin(struct page *page, loff_t pos, unsigned len,
 	/*
 	 * If we issued read requests, let them complete.
 	 */
-	while (wait_bh > wait) {
-		wait_on_buffer(*--wait_bh);
-		if (!buffer_uptodate(*wait_bh))
+	for (i = 0; &wait[i] < wait_bh; i++) {
+		wait_on_buffer(wait[i]);
+		if (!buffer_uptodate(wait[i]))
 			err = -EIO;
 	}
-	if (unlikely(err))
+	if (unlikely(err)) {
 		page_zero_new_buffers(page, from, to);
-	else if (decrypt) {
-		err = fscrypt_decrypt_block(page->mapping->host, page,
-				PAGE_SIZE, 0, page->index);
-		if (err)
-			clear_buffer_uptodate(*wait_bh);
+	} else if (decrypt) {
+		page_blk_nr = (sector_t)page->index << (PAGE_SHIFT - bbits);
+
+		for (i = 0; &wait[i] < wait_bh; i++) {
+			int err2;
+
+			--wait_bh;
+			block = page_blk_nr + (bh_offset(wait[i]) >> bbits);
+			err2 = fscrypt_decrypt_block(page->mapping->host, page,
+						wait[i]->b_size,
+						bh_offset(wait[i]),
+						block);
+			if (err2) {
+				clear_buffer_uptodate(wait[i]);
+				err = err2;
+			}
+		}
 	}
 
 	return err;