diff mbox

[v3,3/5] crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS

Message ID 20180618215657.GB8022@google.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Eric Biggers June 18, 2018, 9:56 p.m. UTC
On Sun, Jun 17, 2018 at 01:10:41PM +0200, Ard Biesheuvel wrote:
> >>>>> +
> >>>>> +     // One-time XTS preparation
> >>>>> +
> >>>>> +     /*
> >>>>> +      * Allocate stack space to store 128 bytes worth of tweaks.  For
> >>>>> +      * performance, this space is aligned to a 16-byte boundary so that we
> >>>>> +      * can use the load/store instructions that declare 16-byte alignment.
> >>>>> +      */
> >>>>> +     sub             sp, #128
> >>>>> +     bic             sp, #0xf
> >>>>
> >>>>
> >>>> This fails here when building with CONFIG_THUMB2_KERNEL=y
> >>>>
> >>>>   AS      arch/arm/crypto/speck-neon-core.o
> >>>>
> >>>> arch/arm/crypto/speck-neon-core.S: Assembler messages:
> >>>>
> >>>> arch/arm/crypto/speck-neon-core.S:419: Error: r13 not allowed here --
> >>>> `bic sp,#0xf'
> >>>> arch/arm/crypto/speck-neon-core.S:423: Error: r13 not allowed here --
> >>>> `bic sp,#0xf'
> >>>> arch/arm/crypto/speck-neon-core.S:427: Error: r13 not allowed here --
> >>>> `bic sp,#0xf'
> >>>> arch/arm/crypto/speck-neon-core.S:431: Error: r13 not allowed here --
> >>>> `bic sp,#0xf'
> >>>>
> >>>> In a quick hack this change seems to address it:
> >>>>
> >>>>
> >>>> -       sub             sp, #128
> >>>> -       bic             sp, #0xf
> >>>> +       mov             r6, sp
> >>>> +       sub             r6, #128
> >>>> +       bic             r6, #0xf
> >>>> +       mov             sp, r6
> >>>>
> >>>> But there is probably a better solution to address this.
> >>>>
> >>>
> >>> Given that there is no NEON on M class cores, I recommend we put something like
> >>>
> >>> THUMB(bx pc)
> >>> THUMB(nop.w)
> >>> THUMB(.arm)
> >>>
> >>> at the beginning and be done with it.
> >>
> >> I mean nop.n or just nop, of course, and we may need a '.align 2' at
> >> the beginning as well.
> >
> > Wouldn't it be preferable to have it assemble it in Thumb2 too? It seems
> > that bic sp,#0xf is the only issue...
> >
> 
> Well, in general, yes. In the case of NEON code, not really, since the
> resulting code will not be smaller anyway, because the Thumb2 NEON
> opcodes are all 4 bytes. Also, Thumb2-only cores don't have NEON
> units, so all cores that this code can run on will be able to run in
> ARM mode.
> 
> So from a maintainability pov, having code that only assembles in one
> way is better than having code that must compile both to ARM and to
> Thumb2 opcodes.
> 
> Just my 2 cents, anyway.

I don't have too much of a preference, though Stefan's suggested 4 instructions
can be reduced to 3, which also matches what aes-neonbs-core.S does:

        sub             r12, sp, #128
        bic             r12, #0xf
        mov             sp, r12

Ard, is the following what you're suggesting instead?

--
To unsubscribe from this list: send the line "unsubscribe linux-fscrypt" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Ard Biesheuvel June 18, 2018, 10:04 p.m. UTC | #1
On 18 June 2018 at 23:56, Eric Biggers <ebiggers@google.com> wrote:
> On Sun, Jun 17, 2018 at 01:10:41PM +0200, Ard Biesheuvel wrote:
>> >>>>> +
>> >>>>> +     // One-time XTS preparation
>> >>>>> +
>> >>>>> +     /*
>> >>>>> +      * Allocate stack space to store 128 bytes worth of tweaks.  For
>> >>>>> +      * performance, this space is aligned to a 16-byte boundary so that we
>> >>>>> +      * can use the load/store instructions that declare 16-byte alignment.
>> >>>>> +      */
>> >>>>> +     sub             sp, #128
>> >>>>> +     bic             sp, #0xf
>> >>>>
>> >>>>
>> >>>> This fails here when building with CONFIG_THUMB2_KERNEL=y
>> >>>>
>> >>>>   AS      arch/arm/crypto/speck-neon-core.o
>> >>>>
>> >>>> arch/arm/crypto/speck-neon-core.S: Assembler messages:
>> >>>>
>> >>>> arch/arm/crypto/speck-neon-core.S:419: Error: r13 not allowed here --
>> >>>> `bic sp,#0xf'
>> >>>> arch/arm/crypto/speck-neon-core.S:423: Error: r13 not allowed here --
>> >>>> `bic sp,#0xf'
>> >>>> arch/arm/crypto/speck-neon-core.S:427: Error: r13 not allowed here --
>> >>>> `bic sp,#0xf'
>> >>>> arch/arm/crypto/speck-neon-core.S:431: Error: r13 not allowed here --
>> >>>> `bic sp,#0xf'
>> >>>>
>> >>>> In a quick hack this change seems to address it:
>> >>>>
>> >>>>
>> >>>> -       sub             sp, #128
>> >>>> -       bic             sp, #0xf
>> >>>> +       mov             r6, sp
>> >>>> +       sub             r6, #128
>> >>>> +       bic             r6, #0xf
>> >>>> +       mov             sp, r6
>> >>>>
>> >>>> But there is probably a better solution to address this.
>> >>>>
>> >>>
>> >>> Given that there is no NEON on M class cores, I recommend we put something like
>> >>>
>> >>> THUMB(bx pc)
>> >>> THUMB(nop.w)
>> >>> THUMB(.arm)
>> >>>
>> >>> at the beginning and be done with it.
>> >>
>> >> I mean nop.n or just nop, of course, and we may need a '.align 2' at
>> >> the beginning as well.
>> >
>> > Wouldn't it be preferable to have it assemble it in Thumb2 too? It seems
>> > that bic sp,#0xf is the only issue...
>> >
>>
>> Well, in general, yes. In the case of NEON code, not really, since the
>> resulting code will not be smaller anyway, because the Thumb2 NEON
>> opcodes are all 4 bytes. Also, Thumb2-only cores don't have NEON
>> units, so all cores that this code can run on will be able to run in
>> ARM mode.
>>
>> So from a maintainability pov, having code that only assembles in one
>> way is better than having code that must compile both to ARM and to
>> Thumb2 opcodes.
>>
>> Just my 2 cents, anyway.
>
> I don't have too much of a preference, though Stefan's suggested 4 instructions
> can be reduced to 3, which also matches what aes-neonbs-core.S does:
>
>         sub             r12, sp, #128
>         bic             r12, #0xf
>         mov             sp, r12
>
> Ard, is the following what you're suggesting instead?
>

Yes, but after looking at the actual code, I prefer the change above.
The access occurs only once, not in the loop so the additional
instructions should not affect performance.

Apologies for the noise.

> diff --git a/arch/arm/crypto/speck-neon-core.S b/arch/arm/crypto/speck-neon-core.S
> index 3c1e203e53b9..c989ce3dc057 100644
> --- a/arch/arm/crypto/speck-neon-core.S
> +++ b/arch/arm/crypto/speck-neon-core.S
> @@ -8,6 +8,7 @@
>   */
>
>  #include <linux/linkage.h>
> +#include <asm/assembler.h>
>
>         .text
>         .fpu            neon
> @@ -233,6 +234,12 @@
>   * nonzero multiple of 128.
>   */
>  .macro _speck_xts_crypt        n, decrypting
> +
> +       .align          2
> +       THUMB(bx pc)
> +       THUMB(nop)
> +       THUMB(.arm)
> +
>         push            {r4-r7}
>         mov             r7, sp
>
> @@ -413,6 +420,8 @@
>         mov             sp, r7
>         pop             {r4-r7}
>         bx              lr
> +
> +       THUMB(.thumb)
>  .endm
>
>  ENTRY(speck128_xts_encrypt_neon)
--
To unsubscribe from this list: send the line "unsubscribe linux-fscrypt" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/crypto/speck-neon-core.S b/arch/arm/crypto/speck-neon-core.S
index 3c1e203e53b9..c989ce3dc057 100644
--- a/arch/arm/crypto/speck-neon-core.S
+++ b/arch/arm/crypto/speck-neon-core.S
@@ -8,6 +8,7 @@ 
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 	.text
 	.fpu		neon
@@ -233,6 +234,12 @@ 
  * nonzero multiple of 128.
  */
 .macro _speck_xts_crypt	n, decrypting
+
+	.align		2
+	THUMB(bx pc)
+	THUMB(nop)
+	THUMB(.arm)
+
 	push		{r4-r7}
 	mov		r7, sp
 
@@ -413,6 +420,8 @@ 
 	mov		sp, r7
 	pop		{r4-r7}
 	bx		lr
+
+	THUMB(.thumb)
 .endm
 
 ENTRY(speck128_xts_encrypt_neon)