diff --git a/Documentation/filesystems/xfs-online-fsck-design.rst b/Documentation/filesystems/xfs-online-fsck-design.rst
index 2957aefb983a..c41f089549a0 100644
--- a/Documentation/filesystems/xfs-online-fsck-design.rst
+++ b/Documentation/filesystems/xfs-online-fsck-design.rst
@@ -2240,3 +2240,635 @@ this functionality as follows:
 
 After removing xfile logged buffers from the transaction in this manner, the
 transaction can be committed or cancelled.
+
+Bulk Loading of Ondisk B+Trees
+------------------------------
+
+As mentioned previously, early iterations of online repair built new btree
+structures by creating a new btree and adding observations individually.
+Loading a btree one record at a time had a slight advantage of not requiring
+the incore records to be sorted prior to commit, but was very slow and leaked
+blocks if the system went down during a repair.
+Loading records one at a time also meant that repair could not control the
+loading factor of the blocks in the new btree.
+
+Fortunately, the venerable ``xfs_repair`` tool had a more efficient means for
+rebuilding a btree index from a collection of records -- bulk btree loading.
+This was implemented rather inefficiently code-wise, since ``xfs_repair``
+had separate copy-pasted implementations for each btree type.
+
+To prepare for online fsck, each of the four bulk loaders were studied, notes
+were taken, and the four were refactored into a single generic btree bulk
+loading mechanism.
+Those notes in turn have been refreshed and are presented below.
+
+Geometry Computation
+````````````````````
+
+The zeroth step of bulk loading is to assemble the entire record set that will
+be stored in the new btree, and sort the records.
+Next, call ``xfs_btree_bload_compute_geometry`` to compute the shape of the
+btree from the record set, the type of btree, and any load factor preferences.
+This information is required for resource reservation.
+
+First, the geometry computation computes the minimum and maximum records that
+will fit in a leaf block from the size of a btree block and the size of the
+block header.
+Roughly speaking, the maximum number of records is::
+
+        maxrecs = (block_size - header_size) / record_size
+
+The XFS design specifies that btree blocks should be merged when possible,
+which means the minimum number of records is half of maxrecs::
+
+        minrecs = maxrecs / 2
+
+The next variable to determine is the desired loading factor.
+This must be at least minrecs and no more than maxrecs.
+Choosing minrecs is undesirable because it wastes half the block.
+Choosing maxrecs is also undesirable because adding a single record to each
+newly rebuilt leaf block will cause a tree split, which causes a noticeable
+drop in performance immediately afterwards.
+The default loading factor was chosen to be 75% of maxrecs, which provides a
+reasonably compact structure without any immediate split penalties.
+If space is tight, the loading factor will be set to maxrecs to try to avoid
+running out of space::
+
+        leaf_load_factor = enough space ? (maxrecs + minrecs) / 2 : maxrecs
+
+Load factor is computed for btree node blocks using the combined size of the
+btree key and pointer as the record size::
+
+        maxrecs = (block_size - header_size) / (key_size + ptr_size)
+        minrecs = maxrecs / 2
+        node_load_factor = enough space ? (maxrecs + minrecs) / 2 : maxrecs
+
+Once that's done, the number of leaf blocks required to store the record set
+can be computed as::
+
+        leaf_blocks = ceil(record_count / leaf_load_factor)
+
+The number of node blocks needed to point to the next level down in the tree
+is computed as::
+
+        n_blocks = (n == 0 ? leaf_blocks : node_blocks[n])
+        node_blocks[n + 1] = ceil(n_blocks / node_load_factor)
+
+The entire computation is performed recursively until the current level only
+needs one block.
+The resulting geometry is as follows:
+
+- For AG-rooted btrees, this level is the root level, so the height of the new
+  tree is ``level + 1`` and the space needed is the summation of the number of
+  blocks on each level.
+
+- For inode-rooted btrees where the records in the top level do not fit in the
+  inode fork area, the height is ``level + 2``, the space needed is the
+  summation of the number of blocks on each level, and the inode fork points to
+  the root block.
+
+- For inode-rooted btrees where the records in the top level can be stored in
+  the inode fork area, then the root block can be stored in the inode, the
+  height is ``level + 1``, and the space needed is one less than the summation
+  of the number of blocks on each level.
+  This only becomes relevant when non-bmap btrees gain the ability to root in
+  an inode, which is a future patchset and only included here for completeness.
+
+.. _newbt:
+
+Reserving New B+Tree Blocks
+```````````````````````````
+
+Once repair knows the number of blocks needed for the new btree, it allocates
+those blocks using the free space information.
+Each reserved extent is tracked separately by the btree builder state data.
+To improve crash resilience, the reservation code also logs an Extent Freeing
+Intent (EFI) item in the same transaction as each space allocation and attaches
+its in-memory ``struct xfs_extent_free_item`` object to the space reservation.
+If the system goes down, log recovery will use the unfinished EFIs to free the
+unused space, the free space, leaving the filesystem unchanged.
+
+Each time the btree builder claims a block for the btree from a reserved
+extent, it updates the in-memory reservation to reflect the claimed space.
+Block reservation tries to allocate as much contiguous space as possible to
+reduce the number of EFIs in play.
+
+While repair is writing these new btree blocks, the EFIs created for the space
+reservations pin the tail of the ondisk log.
+It's possible that other parts of the system will remain busy and push the head
+of the log towards the pinned tail.
+To avoid livelocking the filesystem, the EFIs must not pin the tail of the log
+for too long.
+To alleviate this problem, the dynamic relogging capability of the deferred ops
+mechanism is reused here to commit a transaction at the log head containing an
+EFD for the old EFI and new EFI at the head.
+This enables the log to release the old EFI to keep the log moving forwards.
+
+EFIs have a role to play during the commit and reaping phases; please see the
+next section and the section about :ref:`reaping<reaping>` for more details.
+
+Proposed patchsets are the
+`bitmap rework
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-bitmap-rework>`_
+and the
+`preparation for bulk loading btrees
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-prep-for-bulk-loading>`_.
+
+
+Writing the New Tree
+````````````````````
+
+This part is pretty simple -- the btree builder (``xfs_btree_bulkload``) claims
+a block from the reserved list, writes the new btree block header, fills the
+rest of the block with records, and adds the new leaf block to a list of
+written blocks.
+Sibling pointers are set every time a new block is added to the level.
+When it finishes writing the record leaf blocks, it moves on to the node
+blocks.
+To fill a node block, it walks each block in the next level down in the tree
+to compute the relevant keys and write them into the parent node.
+When it reaches the root level, it is ready to commit the new btree!
+
+The first step to commit the new btree is to persist the btree blocks to disk
+synchronously.
+This is a little complicated because a new btree block could have been freed
+in the recent past, so the builder must use ``xfs_buf_delwri_queue_here`` to
+remove the (stale) buffer from the AIL list before it can write the new blocks
+to disk.
+Blocks are queued for IO using a delwri list and written in one large batch
+with ``xfs_buf_delwri_submit``.
+
+Once the new blocks have been persisted to disk, control returns to the
+individual repair function that called the bulk loader.
+The repair function must log the location of the new root in a transaction,
+clean up the space reservations that were made for the new btree, and reap the
+old metadata blocks:
+
+1. Commit the location of the new btree root.
+
+2. For each incore reservation:
+
+   a. Log Extent Freeing Done (EFD) items for all the space that was consumed
+      by the btree builder.  The new EFDs must point to the EFIs attached to
+      the reservation to prevent log recovery from freeing the new blocks.
+
+   b. For unclaimed portions of incore reservations, create a regular deferred
+      extent free work item to be free the unused space later in the
+      transaction chain.
+
+   c. The EFDs and EFIs logged in steps 2a and 2b must not overrun the
+      reservation of the committing transaction.
+      If the btree loading code suspects this might be about to happen, it must
+      call ``xrep_defer_finish`` to clear out the deferred work and obtain a
+      fresh transaction.
+
+3. Clear out the deferred work a second time to finish the commit and clean
+   the repair transaction.
+
+The transaction rolling in steps 2c and 3 represent a weakness in the repair
+algorithm, because a log flush and a crash before the end of the reap step can
+result in space leaking.
+Online repair functions minimize the chances of this occuring by using very
+large transactions, which each can accomodate many thousands of block freeing
+instructions.
+Repair moves on to reaping the old blocks, which will be presented in a
+subsequent :ref:`section<reaping>` after a few case studies of bulk loading.
+
+Case Study: Rebuilding the Inode Index
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The high level process to rebuild the inode index btree is:
+
+1. Walk the reverse mapping records to generate ``struct xfs_inobt_rec``
+   records from the inode chunk information and a bitmap of the old inode btree
+   blocks.
+
+2. Append the records to an xfarray in inode order.
+
+3. Use the ``xfs_btree_bload_compute_geometry`` function to compute the number
+   of blocks needed for the inode btree.
+   If the free space inode btree is enabled, call it again to estimate the
+   geometry of the finobt.
+
+4. Allocate the number of blocks computed in the previous step.
+
+5. Use ``xfs_btree_bload`` to write the xfarray records to btree blocks and
+   generate the internal node blocks.
+   If the free space inode btree is enabled, call it again to load the finobt.
+
+6. Commit the location of the new btree root block(s) to the AGI.
+
+7. Reap the old btree blocks using the bitmap created in step 1.
+
+Details are as follows.
+
+The inode btree maps inumbers to the ondisk location of the associated
+inode records, which means that the inode btrees can be rebuilt from the
+reverse mapping information.
+Reverse mapping records with an owner of ``XFS_RMAP_OWN_INOBT`` marks the
+location of the old inode btree blocks.
+Each reverse mapping record with an owner of ``XFS_RMAP_OWN_INODES`` marks the
+location of at least one inode cluster buffer.
+A cluster is the smallest number of ondisk inodes that can be allocated or
+freed in a single transaction; it is never smaller than 1 fs block or 4 inodes.
+
+For the space represented by each inode cluster, ensure that there are no
+records in the free space btrees nor any records in the reference count btree.
+If there are, the space metadata inconsistencies are reason enough to abort the
+operation.
+Otherwise, read each cluster buffer to check that its contents appear to be
+ondisk inodes and to decide if the file is allocated
+(``xfs_dinode.i_mode != 0``) or free (``xfs_dinode.i_mode == 0``).
+Accumulate the results of successive inode cluster buffer reads until there is
+enough information to fill a single inode chunk record, which is 64 consecutive
+numbers in the inumber keyspace.
+If the chunk is sparse, the chunk record may include holes.
+
+Once the repair function accumulates one chunk's worth of data, it calls
+``xfarray_append`` to add the inode btree record to the xfarray.
+This xfarray is walked twice during the btree creation step -- once to populate
+the inode btree with all inode chunk records, and a second time to populate the
+free inode btree with records for chunks that have free non-sparse inodes.
+The number of records for the inode btree is the number of xfarray records,
+but the record count for the free inode btree has to be computed as inode chunk
+records are stored in the xfarray.
+
+The proposed patchset is the
+`AG btree repair
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-ag-btrees>`_
+series.
+
+Case Study: Rebuilding the Space Reference Counts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The high level process to rebuild the reference count btree is:
+
+1. Walk the reverse mapping records to generate ``struct xfs_refcount_irec``
+   records for any space having more than one reverse mapping and add them to
+   the xfarray.
+   Any records owned by ``XFS_RMAP_OWN_COW`` are also added to the xfarray.
+   Use any records owned by ``XFS_RMAP_OWN_REFC`` to create a bitmap of old
+   refcount btree blocks.
+
+2. Sort the records in physical extent order, putting the CoW staging extents
+   at the end of the xfarray.
+
+3. Use the ``xfs_btree_bload_compute_geometry`` function to compute the number
+   of blocks needed for the new tree.
+
+4. Allocate the number of blocks computed in the previous step.
+
+5. Use ``xfs_btree_bload`` to write the xfarray records to btree blocks and
+   generate the internal node blocks.
+
+6. Commit the location of new btree root block to the AGF.
+
+7. Reap the old btree blocks using the bitmap created in step 1.
+
+Details are as follows; the same algorithm is used by ``xfs_repair`` to
+generate refcount information from reverse mapping records.
+
+Reverse mapping records are used to rebuild the reference count information.
+Reference counts are required for correct operation of copy on write for shared
+file data.
+Imagine the reverse mapping entries as rectangles representing extents of
+physical blocks, and that the rectangles can be laid down to allow them to
+overlap each other.
+From the diagram below, it is apparent that a reference count record must start
+or end wherever the height of the stack changes.
+In other words, the record emission stimulus is level-triggered::
+
+                        █    ███
+              ██      █████ ████   ███        ██████
+        ██   ████     ███████████ ████     █████████
+        ████████████████████████████████ ███████████
+        ^ ^  ^^ ^^    ^ ^^ ^^^  ^^^^  ^ ^^ ^  ^     ^
+        2 1  23 21    3 43 234  2123  1 01 2  3     0
+
+The ondisk reference count btree does not store the refcount == 0 cases because
+the free space btree already records which blocks are free.
+Extents being used to stage copy-on-write operations should be the only records
+with refcount == 1.
+Single-owner file blocks aren't recorded in either the free space or the
+reference count btrees.
+
+Given the reverse mapping btree which orders records by physical block number,
+a starting physical block (``sp``), a bag-like data structure to hold mappings
+that cover ``sp``, and the next physical block where the level changes
+(``np``), reference count information is constructed from reverse mapping data
+as follows:
+
+While there are still unprocessed mappings in the reverse mapping btree:
+
+1. Set ``sp`` to the physical block of the next unprocessed reverse mapping
+   record.
+
+2. Add to the bag all the reverse mappings where ``rm_startblock`` == ``sp``.
+
+3. Set ``np`` to the physical block where the bag size will change.
+   This is the minimum of (``rm_startblock`` of the next unprocessed mapping)
+   and (``rm_startblock`` + ``rm_blockcount`` of each mapping in the bag).
+
+4. Record the bag size as ``old_bag_size``.
+
+5. While the bag isn't empty,
+
+   a. Remove from the bag all mappings where ``rm_startblock`` +
+      ``rm_blockcount`` == ``np``.
+
+   b. Add to the bag all reverse mappings where ``rm_startblock`` == ``np``.
+
+   c. If the bag size isn't ``old_bag_size``, store the refcount record
+      ``(sp, np - sp, old_bag_size)`` in the refcount xfarray.
+
+   d. If the bag is empty, break out of this inner loop.
+
+   e. Set ``old_bag_size`` to ``bag_size``.
+
+   f. Set ``sp`` = ``np``.
+
+   g. Set ``np`` to the physical block where the bag size will change.
+      Go to step 3 above.
+
+The bag-like structure in this case is a type 2 xfarray as discussed in the
+:ref:`xfarray access patterns<xfarray_access_patterns>` section.
+Reverse mappings are added to the bag using ``xfarray_store_anywhere`` and
+removed via ``xfarray_unset``.
+Bag members are examined through ``xfarray_iter`` loops.
+
+The proposed patchset is the
+`AG btree repair
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-ag-btrees>`_
+series.
+
+Case Study: Rebuilding File Fork Mapping Indices
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The high level process to rebuild a data/attr fork mapping btree is:
+
+1. Walk the reverse mapping records to generate ``struct xfs_bmbt_rec``
+   records from the reverse mapping records for that inode and fork.
+   Append these records to an xfarray.
+   Compute the bitmap of the old bmap btree blocks from the ``BMBT_BLOCK``
+   records.
+
+2. Use the ``xfs_btree_bload_compute_geometry`` function to compute the number
+   of blocks needed for the new tree.
+
+3. Sort the records in file offset order.
+
+4. If the extent records would fit in the inode fork immediate area, commit the
+   records to that immediate area and skip to step 8.
+
+5. Allocate the number of blocks computed in the previous step.
+
+6. Use ``xfs_btree_bload`` to write the xfarray records to btree blocks and
+   generate the internal node blocks.
+
+7. Commit the new btree root block to the inode fork immediate area.
+
+8. Reap the old btree blocks using the bitmap created in step 1.
+
+There are some complications here:
+First, it's possible to move the fork offset to adjust the sizes of the
+immediate areas if the data and attr forks are not both in BMBT format.
+Second, if there are sufficiently few fork mappings, it may be possible to use
+EXTENTS format instead of BMBT, which may require a conversion.
+Third, the incore extent map must be reloaded carefully to avoid disturbing
+any delayed allocation extents.
+
+The proposed patchset is the
+`file repair
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-inodes>`_
+series.
+
+.. _reaping:
+
+Reaping Old Metadata Blocks
+---------------------------
+
+Whenever online fsck builds a new data structure to replace one that is
+suspect, there is a question of how to find and dispose of the blocks that
+belonged to the old structure.
+The laziest method of course is not to deal with them at all, but this slowly
+leads to service degradations as space leaks out of the filesystem.
+Hopefully, someone will schedule a rebuild of the free space information to
+plug all those leaks.
+Offline repair rebuilds all space metadata after recording the usage of
+the files and directories that it decides not to clear, hence it can build new
+structures in the discovered free space and avoid the question of reaping.
+
+As part of a repair, online fsck relies heavily on the reverse mapping records
+to find space that is owned by the corresponding rmap owner yet truly free.
+Cross referencing rmap records with other rmap records is necessary because
+there may be other data structures that also think they own some of those
+blocks (e.g. crosslinked trees).
+Permitting the block allocator to hand them out again will not push the system
+towards consistency.
+
+For space metadata, the process of finding extents to dispose of generally
+follows this format:
+
+1. Create a bitmap of space used by data structures that must be preserved.
+   The space reservations used to create the new metadata can be used here if
+   the same rmap owner code is used to denote all of the objects being rebuilt.
+
+2. Survey the reverse mapping data to create a bitmap of space owned by the
+   same ``XFS_RMAP_OWN_*`` number for the metadata that is being preserved.
+
+3. Use the bitmap disunion operator to subtract (1) from (2).
+   The remaining set bits represent candidate extents that could be freed.
+   The process moves on to step 4 below.
+
+Repairs for file-based metadata such as extended attributes, directories,
+symbolic links, quota files and realtime bitmaps are performed by building a
+new structure attached to a temporary file and swapping the forks.
+Afterward, the mappings in the old file fork are the candidate blocks for
+disposal.
+
+The process for disposing of old extents is as follows:
+
+4. For each candidate extent, count the number of reverse mapping records for
+   the first block in that extent that do not have the same rmap owner for the
+   data structure being repaired.
+
+   - If zero, the block has a single owner and can be freed.
+
+   - If not, the block is part of a crosslinked structure and must not be
+     freed.
+
+5. Starting with the next block in the extent, figure out how many more blocks
+   have the same zero/nonzero other owner status as that first block.
+
+6. If the region is crosslinked, delete the reverse mapping entry for the
+   structure being repaired and move on to the next region.
+
+7. If the region is to be freed, mark any corresponding buffers in the buffer
+   cache as stale to prevent log writeback.
+
+8. Free the region and move on.
+
+However, there is one complication to this procedure.
+Transactions are of finite size, so the reaping process must be careful to roll
+the transactions to avoid overruns.
+Overruns come from two sources:
+
+a. EFIs logged on behalf of space that is no longer occupied
+
+b. Log items for buffer invalidations
+
+This is also a window in which a crash during the reaping process can leak
+blocks.
+As stated earlier, online repair functions use very large transactions to
+minimize the chances of this occurring.
+
+The proposed patchset is the
+`preparation for bulk loading btrees
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-prep-for-bulk-loading>`_
+series.
+
+Case Study: Reaping After a Regular Btree Repair
+````````````````````````````````````````````````
+
+Old reference count and inode btrees are the easiest to reap because they have
+rmap records with special owner codes: ``XFS_RMAP_OWN_REFC`` for the refcount
+btree, and ``XFS_RMAP_OWN_INOBT`` for the inode and free inode btrees.
+Creating a list of extents to reap the old btree blocks is quite simple,
+conceptually:
+
+1. Lock the relevant AGI/AGF header buffers to prevent allocation and frees.
+
+2. For each reverse mapping record with an rmap owner corresponding to the
+   metadata structure being rebuilt, set the corresponding range in a bitmap.
+
+3. Walk the current data structures that have the same rmap owner.
+   For each block visited, clear that range in the above bitmap.
+
+4. Each set bit in the bitmap represents a block that could be a block from the
+   old data structures and hence is a candidate for reaping.
+   In other words, ``(rmap_records_owned_by & ~blocks_reachable_by_walk)``
+   are the blocks that might be freeable.
+
+If it is possible to maintain the AGF lock throughout the repair (which is the
+common case), then step 2 can be performed at the same time as the reverse
+mapping record walk that creates the records for the new btree.
+
+Case Study: Rebuilding the Free Space Indices
+`````````````````````````````````````````````
+
+The high level process to rebuild the free space indices is:
+
+1. Walk the reverse mapping records to generate ``struct xfs_alloc_rec_incore``
+   records from the gaps in the reverse mapping btree.
+
+2. Append the records to an xfarray.
+
+3. Use the ``xfs_btree_bload_compute_geometry`` function to compute the number
+   of blocks needed for each new tree.
+
+4. Allocate the number of blocks computed in the previous step from the free
+   space information collected.
+
+5. Use ``xfs_btree_bload`` to write the xfarray records to btree blocks and
+   generate the internal node blocks for the free space by block index.
+   Call it again for the free space by length index.
+
+6. Commit the locations of the new btree root blocks to the AGF.
+
+7. Reap the old btree blocks by looking for space that is not recorded by the
+   reverse mapping btree, the new free space btrees, or the AGFL.
+
+Repairing the free space btrees has three key complications over a regular
+btree repair:
+
+First, free space is not explicitly tracked in the reverse mapping records.
+Hence, the new free space records must be inferred from gaps in the physical
+space component of the keyspace of the reverse mapping btree.
+
+Second, free space repairs cannot use the common btree reservation code because
+new blocks are reserved out of the free space btrees.
+This is impossible when repairing the free space btrees themselves.
+However, repair holds the AGF buffer lock for the duration of the free space
+index reconstruction, so it can use the collected free space information to
+supply the blocks for the new free space btrees.
+It is not necessary to back each reserved extent with an EFI because the new
+free space btrees are constructed in what the ondisk filesystem thinks is
+unowned space.
+However, if reserving blocks for the new btrees from the collected free space
+information changes the number of free space records, repair must re-estimate
+the new free space btree geometry with the new record count until the
+reservation is sufficient.
+As part of committing the new btrees, repair must ensure that reverse mappings
+are created for the reserved blocks and that unused reserved blocks are
+inserted into the free space btrees.
+Deferrred rmap and freeing operations are used to ensure that this transition
+is atomic, similar to the other btree repair functions.
+
+Third, finding the blocks to reap after the repair is not overly
+straightforward.
+Blocks for the free space btrees and the reverse mapping btrees are supplied by
+the AGFL.
+Blocks put onto the AGFL have reverse mapping records with the owner
+``XFS_RMAP_OWN_AG``.
+This ownership is retained when blocks move from the AGFL into the free space
+btrees or the reverse mapping btrees.
+When repair walks reverse mapping records to synthesize free space records, it
+creates a bitmap (``ag_owner_bitmap``) of all the space claimed by
+``XFS_RMAP_OWN_AG`` records.
+The repair context maintains a second bitmap corresponding to the rmap btree
+blocks and the AGFL blocks (``rmap_agfl_bitmap``).
+When the walk is complete, the bitmap disunion operation ``(ag_owner_bitmap &
+~rmap_agfl_bitmap)`` computes the extents that are used by the old free space
+btrees.
+These blocks can then be reaped using the methods outlined above.
+
+The proposed patchset is the
+`AG btree repair
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-ag-btrees>`_
+series.
+
+.. _rmap_reap:
+
+Case Study: Reaping After Repairing Reverse Mapping Btrees
+``````````````````````````````````````````````````````````
+
+Old reverse mapping btrees are less difficult to reap after a repair.
+As mentioned in the previous section, blocks on the AGFL, the two free space
+btree blocks, and the reverse mapping btree blocks all have reverse mapping
+records with ``XFS_RMAP_OWN_AG`` as the owner.
+The full process of gathering reverse mapping records and building a new btree
+are described in the case study of
+:ref:`live rebuilds of rmap data <rmap_repair>`, but a crucial point from that
+discussion is that the new rmap btree will not contain any records for the old
+rmap btree, nor will the old btree blocks be tracked in the free space btrees.
+The list of candidate reaping blocks is computed by setting the bits
+corresponding to the gaps in the new rmap btree records, and then clearing the
+bits corresponding to extents in the free space btrees and the current AGFL
+blocks.
+The result ``(new_rmapbt_gaps & ~(agfl | bnobt_records))`` are reaped using the
+methods outlined above.
+
+The rest of the process of rebuildng the reverse mapping btree is discussed
+in a separate :ref:`case study<rmap_repair>`.
+
+The proposed patchset is the
+`AG btree repair
+<https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git/log/?h=repair-ag-btrees>`_
+series.
+
+Case Study: Rebuilding the AGFL
+```````````````````````````````
+
+The allocation group free block list (AGFL) is repaired as follows:
+
+1. Create a bitmap for all the space that the reverse mapping data claims is
+   owned by ``XFS_RMAP_OWN_AG``.
+
+2. Subtract the space used by the two free space btrees and the rmap btree.
+
+3. Subtract any space that the reverse mapping data claims is owned by any
+   other owner, to avoid re-adding crosslinked blocks to the AGFL.
+
+4. Once the AGFL is full, reap any blocks leftover.
+
+5. The next operation to fix the freelist will right-size the list.
