diff mbox series

[RFC,v3,12/15] slub: Enable balancing slabs across nodes

Message ID 20190411013441.5415-13-tobin@kernel.org (mailing list archive)
State New, archived
Headers show
Series Slab Movable Objects (SMO) | expand

Commit Message

Tobin C. Harding April 11, 2019, 1:34 a.m. UTC
We have just implemented Slab Movable Objects (SMO).  On NUMA systems
slabs can become unbalanced i.e. many slabs on one node while other
nodes have few slabs.  Using SMO we can balance the slabs across all
the nodes.

The algorithm used is as follows:

 1. Move all objects to node 0 (this has the effect of defragmenting the
    cache).

 2. Calculate the desired number of slabs for each node (this is done
    using the approximation nr_slabs / nr_nodes).

 3. Loop over the nodes moving the desired number of slabs from node 0
    to the node.

Feature is conditionally built in with CONFIG_SMO_NODE, this is because
we need the full list (we enable SLUB_DEBUG to get this).  Future
version may separate final list out of SLUB_DEBUG.

Expose this functionality to userspace via a sysfs entry.  Add sysfs
entry:

       /sysfs/kernel/slab/<cache>/balance

Write of '1' to this file triggers balance, no other value accepted.

This feature relies on SMO being enable for the cache, this is done with
a call to, after the isolate/migrate functions have been defined.

	kmem_cache_setup_mobility(s, isolate, migrate)

Signed-off-by: Tobin C. Harding <tobin@kernel.org>
---
 mm/slub.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)
diff mbox series

Patch

diff --git a/mm/slub.c b/mm/slub.c
index e4f3dde443f5..a5c48c41d72b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4583,6 +4583,109 @@  static unsigned long kmem_cache_move_to_node(struct kmem_cache *s, int node)
 
 	return left;
 }
+
+/*
+ * kmem_cache_move_slabs() - Attempt to move @num slabs to target_node,
+ * @s: The cache we are working on.
+ * @node: The node to move objects from.
+ * @target_node: The node to move objects to.
+ * @num: The number of slabs to move.
+ *
+ * Attempts to move @num slabs from @node to @target_node.  This is done
+ * by migrating objects from slabs on the full_list.
+ *
+ * Return: The number of slabs moved or error code.
+ */
+static long kmem_cache_move_slabs(struct kmem_cache *s,
+				  int node, int target_node, long num)
+{
+	struct kmem_cache_node *n = get_node(s, node);
+	LIST_HEAD(move_list);
+	struct page *page, *page2;
+	unsigned long flags;
+	void **scratch;
+	long done = 0;
+
+	if (node == target_node)
+		return -EINVAL;
+
+	scratch = alloc_scratch(s);
+	if (!scratch)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&n->list_lock, flags);
+	list_for_each_entry_safe(page, page2, &n->full, lru) {
+		if (!slab_trylock(page))
+			/* Busy slab. Get out of the way */
+			continue;
+
+		list_move(&page->lru, &move_list);
+		page->frozen = 1;
+		slab_unlock(page);
+
+		if (++done >= num)
+			break;
+	}
+	spin_unlock_irqrestore(&n->list_lock, flags);
+
+	list_for_each_entry(page, &move_list, lru) {
+		if (page->inuse)
+			move_slab_page(page, scratch, target_node);
+	}
+	kfree(scratch);
+
+	/* Inspect results and dispose of pages */
+	spin_lock_irqsave(&n->list_lock, flags);
+	list_for_each_entry_safe(page, page2, &move_list, lru) {
+		list_del(&page->lru);
+		slab_lock(page);
+		page->frozen = 0;
+
+		if (page->inuse) {
+			/*
+			 * This is best effort only, if slab still has
+			 * objects just put it back on the partial list.
+			 */
+			n->nr_partial++;
+			list_add_tail(&page->lru, &n->partial);
+			slab_unlock(page);
+		} else {
+			slab_unlock(page);
+			discard_slab(s, page);
+		}
+	}
+	spin_unlock_irqrestore(&n->list_lock, flags);
+
+	return done;
+}
+
+/*
+ * kmem_cache_balance_nodes() - Balance slabs across nodes.
+ * @s: The cache we are working on.
+ */
+static void kmem_cache_balance_nodes(struct kmem_cache *s)
+{
+	struct kmem_cache_node *n = get_node(s, 0);
+	unsigned long desired_nr_slabs_per_node;
+	unsigned long nr_slabs;
+	int nr_nodes = 0;
+	int nid;
+
+	(void)kmem_cache_move_to_node(s, 0);
+
+	for_each_node_state(nid, N_NORMAL_MEMORY)
+		nr_nodes++;
+
+	nr_slabs = atomic_long_read(&n->nr_slabs);
+	desired_nr_slabs_per_node = nr_slabs / nr_nodes;
+
+	for_each_node_state(nid, N_NORMAL_MEMORY) {
+		if (nid == 0)
+			continue;
+
+		kmem_cache_move_slabs(s, 0, nid, desired_nr_slabs_per_node);
+	}
+}
 #endif
 
 /**
@@ -5847,6 +5950,22 @@  static ssize_t move_store(struct kmem_cache *s, const char *buf, size_t length)
 	return length;
 }
 SLAB_ATTR(move);
+
+static ssize_t balance_show(struct kmem_cache *s, char *buf)
+{
+	return 0;
+}
+
+static ssize_t balance_store(struct kmem_cache *s,
+			     const char *buf, size_t length)
+{
+	if (buf[0] == '1')
+		kmem_cache_balance_nodes(s);
+	else
+		return -EINVAL;
+	return length;
+}
+SLAB_ATTR(balance);
 #endif	/* CONFIG_SMO_NODE */
 
 #ifdef CONFIG_NUMA
@@ -5975,6 +6094,7 @@  static struct attribute *slab_attrs[] = {
 	&shrink_attr.attr,
 #ifdef CONFIG_SMO_NODE
 	&move_attr.attr,
+	&balance_attr.attr,
 #endif
 	&slabs_cpu_partial_attr.attr,
 #ifdef CONFIG_SLUB_DEBUG