| Message ID | 20190731141245.7230-10-cmaiolino@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | New ->fiemap infrastructure and ->bmap removal | expand |
On Wed, Jul 31, 2019 at 04:12:45PM +0200, Carlos Maiolino wrote: > We don't need ->bmap anymore, only usage for it was FIBMAP, which is now > gone. > > Also kill iomap_bmap() and iomap_bmap_actor once it has no users anymore. > > Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> > --- > > Changelog: > > V2: > - Kill iomap_bmap() and iomap_bmap_actor() > > fs/iomap.c | 34 ---------------------------------- > fs/xfs/xfs_aops.c | 24 ------------------------ > fs/xfs/xfs_trace.h | 1 - > 3 files changed, 59 deletions(-) > > diff --git a/fs/iomap.c b/fs/iomap.c > index 2b182abd18e8..12e6a575feb4 100644 > --- a/fs/iomap.c > +++ b/fs/iomap.c Needs rebasing against 5.3-rc1. > @@ -2153,37 +2153,3 @@ int iomap_swapfile_activate(struct swap_info_struct *sis, > } > EXPORT_SYMBOL_GPL(iomap_swapfile_activate); > #endif /* CONFIG_SWAP */ > - > -static loff_t > -iomap_bmap_actor(struct inode *inode, loff_t pos, loff_t length, > - void *data, struct iomap *iomap) > -{ > - sector_t *bno = data, addr; > - > - if (iomap->type == IOMAP_MAPPED) { > - addr = (pos - iomap->offset + iomap->addr) >> inode->i_blkbits; > - if (addr > INT_MAX) > - WARN(1, "would truncate bmap result\n"); > - else > - *bno = addr; > - } > - return 0; > -} > - > -/* legacy ->bmap interface. 0 is the error return (!) */ > -sector_t > -iomap_bmap(struct address_space *mapping, sector_t bno, > - const struct iomap_ops *ops) > -{ > - struct inode *inode = mapping->host; > - loff_t pos = bno << inode->i_blkbits; > - unsigned blocksize = i_blocksize(inode); > - > - if (filemap_write_and_wait(mapping)) > - return 0; > - > - bno = 0; > - iomap_apply(inode, pos, blocksize, 0, ops, &bno, iomap_bmap_actor); > - return bno; > -} > -EXPORT_SYMBOL_GPL(iomap_bmap); > diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c > index 3619e9e8d359..76ee495eba1a 100644 > --- a/fs/xfs/xfs_aops.c > +++ b/fs/xfs/xfs_aops.c > @@ -1006,29 +1006,6 @@ xfs_vm_releasepage( > return iomap_releasepage(page, gfp_mask); > } > > -STATIC sector_t > -xfs_vm_bmap( > - struct address_space *mapping, > - sector_t block) > -{ > - struct xfs_inode *ip = XFS_I(mapping->host); > - > - trace_xfs_vm_bmap(ip); > - > - /* > - * The swap code (ab-)uses ->bmap to get a block mapping and then > - * bypasses the file system for actual I/O. We really can't allow > - * that on reflinks inodes, so we have to skip out here. And yes, > - * 0 is the magic code for a bmap error. > - * > - * Since we don't pass back blockdev info, we can't return bmap > - * information for rt files either. > - */ > - if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip)) Wait, this isn't the same check that was added to the xfs fiemap implementation. --D > - return 0; > - return iomap_bmap(mapping, block, &xfs_iomap_ops); > -} > - > STATIC int > xfs_vm_readpage( > struct file *unused, > @@ -1067,7 +1044,6 @@ const struct address_space_operations xfs_address_space_operations = { > .set_page_dirty = iomap_set_page_dirty, > .releasepage = xfs_vm_releasepage, > .invalidatepage = xfs_vm_invalidatepage, > - .bmap = xfs_vm_bmap, > .direct_IO = noop_direct_IO, > .migratepage = iomap_migrate_page, > .is_partially_uptodate = iomap_is_partially_uptodate, > diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h > index 47fb07d86efd..3a45a3971dce 100644 > --- a/fs/xfs/xfs_trace.h > +++ b/fs/xfs/xfs_trace.h > @@ -621,7 +621,6 @@ DEFINE_INODE_EVENT(xfs_readdir); > #ifdef CONFIG_XFS_POSIX_ACL > DEFINE_INODE_EVENT(xfs_get_acl); > #endif > -DEFINE_INODE_EVENT(xfs_vm_bmap); > DEFINE_INODE_EVENT(xfs_file_ioctl); > DEFINE_INODE_EVENT(xfs_file_compat_ioctl); > DEFINE_INODE_EVENT(xfs_ioctl_setattr); > -- > 2.20.1 >
diff --git a/fs/iomap.c b/fs/iomap.c index 2b182abd18e8..12e6a575feb4 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -2153,37 +2153,3 @@ int iomap_swapfile_activate(struct swap_info_struct *sis, } EXPORT_SYMBOL_GPL(iomap_swapfile_activate); #endif /* CONFIG_SWAP */ - -static loff_t -iomap_bmap_actor(struct inode *inode, loff_t pos, loff_t length, - void *data, struct iomap *iomap) -{ - sector_t *bno = data, addr; - - if (iomap->type == IOMAP_MAPPED) { - addr = (pos - iomap->offset + iomap->addr) >> inode->i_blkbits; - if (addr > INT_MAX) - WARN(1, "would truncate bmap result\n"); - else - *bno = addr; - } - return 0; -} - -/* legacy ->bmap interface. 0 is the error return (!) */ -sector_t -iomap_bmap(struct address_space *mapping, sector_t bno, - const struct iomap_ops *ops) -{ - struct inode *inode = mapping->host; - loff_t pos = bno << inode->i_blkbits; - unsigned blocksize = i_blocksize(inode); - - if (filemap_write_and_wait(mapping)) - return 0; - - bno = 0; - iomap_apply(inode, pos, blocksize, 0, ops, &bno, iomap_bmap_actor); - return bno; -} -EXPORT_SYMBOL_GPL(iomap_bmap); diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 3619e9e8d359..76ee495eba1a 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1006,29 +1006,6 @@ xfs_vm_releasepage( return iomap_releasepage(page, gfp_mask); } -STATIC sector_t -xfs_vm_bmap( - struct address_space *mapping, - sector_t block) -{ - struct xfs_inode *ip = XFS_I(mapping->host); - - trace_xfs_vm_bmap(ip); - - /* - * The swap code (ab-)uses ->bmap to get a block mapping and then - * bypasses the file system for actual I/O. We really can't allow - * that on reflinks inodes, so we have to skip out here. And yes, - * 0 is the magic code for a bmap error. - * - * Since we don't pass back blockdev info, we can't return bmap - * information for rt files either. - */ - if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip)) - return 0; - return iomap_bmap(mapping, block, &xfs_iomap_ops); -} - STATIC int xfs_vm_readpage( struct file *unused, @@ -1067,7 +1044,6 @@ const struct address_space_operations xfs_address_space_operations = { .set_page_dirty = iomap_set_page_dirty, .releasepage = xfs_vm_releasepage, .invalidatepage = xfs_vm_invalidatepage, - .bmap = xfs_vm_bmap, .direct_IO = noop_direct_IO, .migratepage = iomap_migrate_page, .is_partially_uptodate = iomap_is_partially_uptodate, diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index 47fb07d86efd..3a45a3971dce 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -621,7 +621,6 @@ DEFINE_INODE_EVENT(xfs_readdir); #ifdef CONFIG_XFS_POSIX_ACL DEFINE_INODE_EVENT(xfs_get_acl); #endif -DEFINE_INODE_EVENT(xfs_vm_bmap); DEFINE_INODE_EVENT(xfs_file_ioctl); DEFINE_INODE_EVENT(xfs_file_compat_ioctl); DEFINE_INODE_EVENT(xfs_ioctl_setattr);
We don't need ->bmap anymore, only usage for it was FIBMAP, which is now gone. Also kill iomap_bmap() and iomap_bmap_actor once it has no users anymore. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> --- Changelog: V2: - Kill iomap_bmap() and iomap_bmap_actor() fs/iomap.c | 34 ---------------------------------- fs/xfs/xfs_aops.c | 24 ------------------------ fs/xfs/xfs_trace.h | 1 - 3 files changed, 59 deletions(-)