@@ -15,6 +15,7 @@
#include "delalloc-space.h"
#include "discard.h"
#include "raid56.h"
+#include "zoned.h"
/*
* Return target flags in extended format or 0 if restripe for this chunk_type
@@ -1945,6 +1946,13 @@ static int read_one_block_group(struct btrfs_fs_info *info,
goto error;
}
+ ret = btrfs_load_block_group_zone_info(cache);
+ if (ret) {
+ btrfs_err(info, "failed to load zone info of bg %llu",
+ cache->start);
+ goto error;
+ }
+
/*
* We need to exclude the super stripes now so that the space info has
* super bytes accounted for, otherwise we'll think we have more space
@@ -2148,6 +2156,13 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
cache->needs_free_space = 1;
+
+ ret = btrfs_load_block_group_zone_info(cache);
+ if (ret) {
+ btrfs_put_block_group(cache);
+ return ret;
+ }
+
ret = exclude_super_stripes(cache);
if (ret) {
/* We may have excluded something, so call this just in case */
@@ -183,6 +183,12 @@ struct btrfs_block_group {
/* Record locked full stripes for RAID5/6 block group */
struct btrfs_full_stripe_locks_tree full_stripe_locks_root;
+
+ /*
+ * Allocation offset for the block group to implement sequential
+ * allocation. This is used only with ZONED mode enabled.
+ */
+ u64 alloc_offset;
};
static inline u64 btrfs_block_group_end(struct btrfs_block_group *block_group)
@@ -11,14 +11,20 @@
#include "linux/kernel.h"
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/sched/mm.h>
#include "ctree.h"
#include "volumes.h"
#include "zoned.h"
#include "rcu-string.h"
#include "disk-io.h"
+#include "block-group.h"
/* Maximum number of zones to report per blkdev_report_zones() call */
#define BTRFS_REPORT_NR_ZONES 4096
+/* Invalid allocation pointer value for missing devices */
+#define WP_MISSING_DEV ((u64)-1)
+/* Pseudo write pointer value for conventional zone */
+#define WP_CONVENTIONAL ((u64)-2)
static int copy_zone_info_cb(struct blk_zone *zone, unsigned int idx,
void *data)
@@ -746,3 +752,150 @@ int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size)
return 0;
}
+
+int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache)
+{
+ struct btrfs_fs_info *fs_info = cache->fs_info;
+ struct extent_map_tree *em_tree = &fs_info->mapping_tree;
+ struct extent_map *em;
+ struct map_lookup *map;
+ struct btrfs_device *device;
+ u64 logical = cache->start;
+ u64 length = cache->length;
+ u64 physical = 0;
+ int ret;
+ int i;
+ unsigned int nofs_flag;
+ u64 *alloc_offsets = NULL;
+ u32 num_sequential = 0, num_conventional = 0;
+
+ if (!btrfs_fs_incompat(fs_info, ZONED))
+ return 0;
+
+ /* Sanity check */
+ if (!IS_ALIGNED(length, fs_info->zone_size)) {
+ btrfs_err(fs_info, "unaligned block group at %llu + %llu",
+ logical, length);
+ return -EIO;
+ }
+
+ /* Get the chunk mapping */
+ read_lock(&em_tree->lock);
+ em = lookup_extent_mapping(em_tree, logical, length);
+ read_unlock(&em_tree->lock);
+
+ if (!em)
+ return -EINVAL;
+
+ map = em->map_lookup;
+
+ /*
+ * Get the zone type: if the group is mapped to a non-sequential zone,
+ * there is no need for the allocation offset (fit allocation is OK).
+ */
+ alloc_offsets = kcalloc(map->num_stripes, sizeof(*alloc_offsets),
+ GFP_NOFS);
+ if (!alloc_offsets) {
+ free_extent_map(em);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < map->num_stripes; i++) {
+ bool is_sequential;
+ struct blk_zone zone;
+
+ device = map->stripes[i].dev;
+ physical = map->stripes[i].physical;
+
+ if (device->bdev == NULL) {
+ alloc_offsets[i] = WP_MISSING_DEV;
+ continue;
+ }
+
+ is_sequential = btrfs_dev_is_sequential(device, physical);
+ if (is_sequential)
+ num_sequential++;
+ else
+ num_conventional++;
+
+ if (!is_sequential) {
+ alloc_offsets[i] = WP_CONVENTIONAL;
+ continue;
+ }
+
+ /*
+ * This zone will be used for allocation, so mark this
+ * zone non-empty.
+ */
+ btrfs_dev_clear_zone_empty(device, physical);
+
+ /*
+ * The group is mapped to a sequential zone. Get the zone write
+ * pointer to determine the allocation offset within the zone.
+ */
+ WARN_ON(!IS_ALIGNED(physical, fs_info->zone_size));
+ nofs_flag = memalloc_nofs_save();
+ ret = btrfs_get_dev_zone(device, physical, &zone);
+ memalloc_nofs_restore(nofs_flag);
+ if (ret == -EIO || ret == -EOPNOTSUPP) {
+ ret = 0;
+ alloc_offsets[i] = WP_MISSING_DEV;
+ continue;
+ } else if (ret) {
+ goto out;
+ }
+
+ switch (zone.cond) {
+ case BLK_ZONE_COND_OFFLINE:
+ case BLK_ZONE_COND_READONLY:
+ btrfs_err(fs_info, "Offline/readonly zone %llu",
+ physical >> device->zone_info->zone_size_shift);
+ alloc_offsets[i] = WP_MISSING_DEV;
+ break;
+ case BLK_ZONE_COND_EMPTY:
+ alloc_offsets[i] = 0;
+ break;
+ case BLK_ZONE_COND_FULL:
+ alloc_offsets[i] = fs_info->zone_size;
+ break;
+ default:
+ /* Partially used zone */
+ alloc_offsets[i] =
+ ((zone.wp - zone.start) << SECTOR_SHIFT);
+ break;
+ }
+ }
+
+ if (num_conventional > 0) {
+ /*
+ * Since conventional zones does not have write pointer, we
+ * cannot determine alloc_offset from the pointer
+ */
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
+ case 0: /* single */
+ cache->alloc_offset = alloc_offsets[0];
+ break;
+ case BTRFS_BLOCK_GROUP_DUP:
+ case BTRFS_BLOCK_GROUP_RAID1:
+ case BTRFS_BLOCK_GROUP_RAID0:
+ case BTRFS_BLOCK_GROUP_RAID10:
+ case BTRFS_BLOCK_GROUP_RAID5:
+ case BTRFS_BLOCK_GROUP_RAID6:
+ /* non-SINGLE profiles are not supported yet */
+ default:
+ btrfs_err(fs_info, "Unsupported profile on ZONED %s",
+ btrfs_bg_type_to_raid_name(map->type));
+ ret = -EINVAL;
+ goto out;
+ }
+
+out:
+ kfree(alloc_offsets);
+ free_extent_map(em);
+
+ return ret;
+}
@@ -45,6 +45,7 @@ u64 btrfs_find_allocatable_zones(struct btrfs_device *device, u64 hole_start,
int btrfs_reset_device_zone(struct btrfs_device *device, u64 physical,
u64 length, u64 *bytes);
int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size);
+int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache);
#else /* CONFIG_BLK_DEV_ZONED */
static inline int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos,
struct blk_zone *zone)
@@ -107,6 +108,11 @@ static inline int btrfs_ensure_empty_zones(struct btrfs_device *device,
{
return 0;
}
+static inline int btrfs_load_block_group_zone_info(
+ struct btrfs_block_group *cache)
+{
+ return 0;
+}
#endif
static inline bool btrfs_dev_is_sequential(struct btrfs_device *device, u64 pos)
Zoned btrfs must allocate blocks at the zones' write pointer. The device's write pointer position can be mapped to a logical address within a block group. This commit adds "alloc_offset" to track the logical address. This logical address is populated in btrfs_load_block-group_zone_info() from write pointers of corresponding zones. For now, zoned btrfs only support the SINGLE profile. Supporting non-SINGLE profile with zone append writing is not trivial. For example, in the DUP profile, we send a zone append writing IO to two zones on a device. The device reply with written LBAs for the IOs. If the offsets of the returned addresses from the beginning of the zone are different, then it results in different logical addresses. We need fine-grained logical to physical mapping to support such separated physical address issue. Since it should require additional metadata type, disable non-SINGLE profiles for now. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> --- fs/btrfs/block-group.c | 15 ++++ fs/btrfs/block-group.h | 6 ++ fs/btrfs/zoned.c | 153 +++++++++++++++++++++++++++++++++++++++++ fs/btrfs/zoned.h | 6 ++ 4 files changed, 180 insertions(+)