diff mbox series

[v7,08/10] fs/ntfs3: Add Kconfig, Makefile and doc

Message ID 20200925155537.1030046-9-almaz.alexandrovich@paragon-software.com
State New
Headers show
Series NTFS read-write driver GPL implementation by Paragon Software | expand

Commit Message

Konstantin Komarov Sept. 25, 2020, 3:55 p.m. UTC
This adds Kconfig, Makefile and doc

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
 Documentation/filesystems/ntfs3.rst | 107 ++++++++++++++++++++++++++++
 fs/ntfs3/Kconfig                    |  23 ++++++
 fs/ntfs3/Makefile                   |  11 +++
 3 files changed, 141 insertions(+)
 create mode 100644 Documentation/filesystems/ntfs3.rst
 create mode 100644 fs/ntfs3/Kconfig
 create mode 100644 fs/ntfs3/Makefile
diff mbox series


diff --git a/Documentation/filesystems/ntfs3.rst b/Documentation/filesystems/ntfs3.rst
new file mode 100644
index 000000000000..7b7d71b26c95
--- /dev/null
+++ b/Documentation/filesystems/ntfs3.rst
@@ -0,0 +1,107 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+Summary and Features
+NTFS3 is fully functional NTFS Read-Write driver. The driver works with
+NTFS versions up to 3.1, normal/compressed/sparse files
+and journal replaying. File system type to use on mount is 'ntfs3'.
+- This driver implements NTFS read/write support for normal, sparse and
+  compressed files.
+  NOTE: Operations with compressed files require increased memory consumption;
+- Supports native journal replaying;
+- Supports extended attributes;
+- Supports NFS export of mounted NTFS volumes.
+Mount Options
+The list below describes mount options supported by NTFS3 driver in addition to
+generic ones.
+nls=name		This option informs the driver how to interpret path
+			strings and translate them to Unicode and back. If
+			this option is not set, the default codepage will be
+			Examples:
+				'nls=utf8'
+nls_alt=name		This option extends "nls". It will be used to translate
+			path string to Unicode if primary nls failed.
+			Examples:
+				'nls_alt=cp1251'
+umask=			Controls the default permissions for files/directories created
+			after the NTFS volume is mounted.
+dmask=			Instead of specifying umask which applies both to
+			files and directories, fmask applies only to files and
+			dmask only to directories.
+nohidden		Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN)
+			attribute will not be shown under Linux.
+sys_immutable		Files with the Windows-specific SYSTEM
+			(FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system
+			immutable files.
+discard			Enable support of the TRIM command for improved performance
+			on delete operations, which is recommended for use with the
+			solid-state drives (SSD).
+force			Forces the driver to mount partitions even if 'dirty' flag
+			(volume dirty) is set. Not recommended for use.
+sparse			Create new files as "sparse".
+showmeta		Use this parameter to show all meta-files (System Files) on
+			a mounted NTFS partition.
+			By default, all meta-files are hidden.
+prealloc		Preallocate space for files excessively when file size is
+			increasing on writes. Decreases fragmentation in case of
+			parallel write operations to different files.
+no_acs_rules		"No access rules" mount option sets access rights for
+			files/folders to 777 and owner/group to root. This mount
+			option absorbs all other permissions:
+			- permissions change for files/folders will be reported
+				as successful, but they will remain 777;
+			- owner/group change will be reported as successful, but
+				they will stay as root
+acl			Support POSIX ACLs (Access Control Lists). Effective if
+			supported by Kernel. Not to be confused with NTFS ACLs.
+			The option specified as acl enables support for POSIX ACLs.
+noatime			All files and directories will not update their last access
+			time attribute if a partition is mounted with this parameter.
+			This option can speed up file system operation.
+ToDo list
+- Full journaling support (currently journal replaying is supported) over JBD.
+	- Commercial version of the NTFS driver for Linux.
+	- Direct e-mail address for feedback and requests on the NTFS3 implementation.
diff --git a/fs/ntfs3/Kconfig b/fs/ntfs3/Kconfig
new file mode 100644
index 000000000000..92a9c68008c8
--- /dev/null
+++ b/fs/ntfs3/Kconfig
@@ -0,0 +1,23 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+config NTFS3_FS
+	tristate "NTFS Read-Write file system support"
+	select NLS
+	help
+	  Windows OS native file system (NTFS) support up to NTFS version 3.1.
+	  Y or M enables the NTFS3 driver with full features enabled (read,
+	  write, journal replaying, sparse/compressed files support).
+	  File system type to use on mount is "ntfs3". Module name (M option)
+	  is also "ntfs3".
+	  Documentation: <file:Documentation/filesystems/ntfs3.rst>
+	bool "64 bits per NTFS clusters"
+	depends on NTFS3_FS && 64BIT
+	help
+	  Windows implementation of ntfs.sys uses 32 bits per clusters.
+	  If activated 64 bits per clusters you will be able to use 4k cluster
+	  for 16T+ volumes. Windows will not be able to mount such volumes.
+	  It is recommended to say N here.
diff --git a/fs/ntfs3/Makefile b/fs/ntfs3/Makefile
new file mode 100644
index 000000000000..d99dd1af43aa
--- /dev/null
+++ b/fs/ntfs3/Makefile
@@ -0,0 +1,11 @@ 
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for the ntfs3 filesystem support.
+obj-$(CONFIG_NTFS3_FS) += ntfs3.o
+ntfs3-y := bitfunc.o bitmap.o inode.o fsntfs.o frecord.o \
+	    index.o attrlist.o record.o attrib.o run.o xattr.o\
+	    upcase.o super.o file.o dir.o namei.o lznt.o\
+	    fslog.o