diff mbox series

[v5,03/12] evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded

Message ID 20210407105252.30721-4-roberto.sassu@huawei.com (mailing list archive)
State New, archived
Headers show
Series evm: Improve usability of portable signatures | expand

Commit Message

Roberto Sassu April 7, 2021, 10:52 a.m. UTC
EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
temporarily disable metadata verification until all xattrs/attrs necessary
to verify an EVM portable signature are copied to the file. This flag is
cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
calculated on unverified xattrs/attrs.

Currently EVM unnecessarily denies setting this flag if EVM is initialized
with a public key, which is not a concern as it cannot be used to trust
xattrs/attrs updates. This patch removes this limitation.

Cc: stable@vger.kernel.org # 4.16.x
Fixes: ae1ba1676b88e ("EVM: Allow userland to permit modification of EVM-protected metadata")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
---
 Documentation/ABI/testing/evm      | 5 +++--
 security/integrity/evm/evm_secfs.c | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

Comments

Mimi Zohar April 30, 2021, 8:28 p.m. UTC | #1
Hi Roberto,

On Wed, 2021-04-07 at 12:52 +0200, Roberto Sassu wrote:
> EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
> temporarily disable metadata verification until all xattrs/attrs necessary
> to verify an EVM portable signature are copied to the file. This flag is
> cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
> calculated on unverified xattrs/attrs.
> 
> Currently EVM unnecessarily denies setting this flag if EVM is initialized
> with a public key, which is not a concern as it cannot be used to trust
> xattrs/attrs updates. This patch removes this limitation.
> 
> Cc: stable@vger.kernel.org # 4.16.x
> Fixes: ae1ba1676b88e ("EVM: Allow userland to permit modification of EVM-protected metadata")
> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
> ---
>  Documentation/ABI/testing/evm      | 5 +++--
>  security/integrity/evm/evm_secfs.c | 4 ++--
>  2 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm
> index 3c477ba48a31..eb6d70fd6fa2 100644
> --- a/Documentation/ABI/testing/evm
> +++ b/Documentation/ABI/testing/evm
> @@ -49,8 +49,9 @@ Description:
>  		modification of EVM-protected metadata and
>  		disable all further modification of policy
>  
> -		Note that once a key has been loaded, it will no longer be
> -		possible to enable metadata modification.
> +		Note that once an HMAC key has been loaded, it will no longer
> +		be possible to enable metadata modification and, if it is
> +		already enabled, it will be disabled.
>  
>  		Until key loading has been signaled EVM can not create
>  		or validate the 'security.evm' xattr, but returns
> diff --git a/security/integrity/evm/evm_secfs.c b/security/integrity/evm/evm_secfs.c
> index bbc85637e18b..197a4b83e534 100644
> --- a/security/integrity/evm/evm_secfs.c
> +++ b/security/integrity/evm/evm_secfs.c
> @@ -81,10 +81,10 @@ static ssize_t evm_write_key(struct file *file, const char __user *buf,
>  		return -EINVAL;
>  
>  	/* Don't allow a request to freshly enable metadata writes if
> -	 * keys are loaded.
> +	 * an HMAC key is loaded.
>  	 */
>  	if ((i & EVM_ALLOW_METADATA_WRITES) &&
> -	    ((evm_initialized & EVM_KEY_MASK) != 0) &&
> +	    ((evm_initialized & EVM_INIT_HMAC) != 0) &&
>  	    !(evm_initialized & EVM_ALLOW_METADATA_WRITES))
>  		return -EPERM;
>  

The comment "freshly enable" is confusing.  Perhaps the original intent
was to enable flags before loading any keys.  So the comment and code
were kind of in sync.  With this change, enabling metadata writes may
be triggered after loading an x509 certificate.  Unless someone
comments, I don't have problems with this change.

Once metadata writes are enabled, the only way of disabling them is by
loading and enabling an HMAC key.  With this change "freshly enable"
only refers to after an HMAC key is loaded, when the setup completion
flag is not set.  The code can be simplified by just checking if an
HMAC key is loaded.

thanks,

Mimi
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm
index 3c477ba48a31..eb6d70fd6fa2 100644
--- a/Documentation/ABI/testing/evm
+++ b/Documentation/ABI/testing/evm
@@ -49,8 +49,9 @@  Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification and, if it is
+		already enabled, it will be disabled.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git a/security/integrity/evm/evm_secfs.c b/security/integrity/evm/evm_secfs.c
index bbc85637e18b..197a4b83e534 100644
--- a/security/integrity/evm/evm_secfs.c
+++ b/security/integrity/evm/evm_secfs.c
@@ -81,10 +81,10 @@  static ssize_t evm_write_key(struct file *file, const char __user *buf,
 		return -EINVAL;
 
 	/* Don't allow a request to freshly enable metadata writes if
-	 * keys are loaded.
+	 * an HMAC key is loaded.
 	 */
 	if ((i & EVM_ALLOW_METADATA_WRITES) &&
-	    ((evm_initialized & EVM_KEY_MASK) != 0) &&
+	    ((evm_initialized & EVM_INIT_HMAC) != 0) &&
 	    !(evm_initialized & EVM_ALLOW_METADATA_WRITES))
 		return -EPERM;