diff mbox series

[v3,1/3] fsdax: Factor helpers to simplify dax fault code

Message ID 20210422134501.1596266-2-ruansy.fnst@fujitsu.com (mailing list archive)
State New
Headers show
Series fsdax: Factor helper functions to simplify the code | expand

Commit Message

ruansy.fnst@fujitsu.com April 22, 2021, 1:44 p.m. UTC
The dax page fault code is too long and a bit difficult to read. And it
is hard to understand when we trying to add new features. Some of the
PTE/PMD codes have similar logic. So, factor them as helper functions to
simplify the code.

Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
---
 fs/dax.c | 153 ++++++++++++++++++++++++++++++-------------------------
 1 file changed, 84 insertions(+), 69 deletions(-)

Comments

Ira Weiny April 26, 2021, 11:38 p.m. UTC | #1
On Thu, Apr 22, 2021 at 09:44:59PM +0800, Shiyang Ruan wrote:
> The dax page fault code is too long and a bit difficult to read. And it
> is hard to understand when we trying to add new features. Some of the
> PTE/PMD codes have similar logic. So, factor them as helper functions to
> simplify the code.
> 
> Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
> ---
>  fs/dax.c | 153 ++++++++++++++++++++++++++++++-------------------------
>  1 file changed, 84 insertions(+), 69 deletions(-)
> 
> diff --git a/fs/dax.c b/fs/dax.c
> index b3d27fdc6775..f843fb8fbbf1 100644
> --- a/fs/dax.c
> +++ b/fs/dax.c

[snip]

> @@ -1355,19 +1379,8 @@ static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
>  		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
>  						 0, write && !sync);
>  
> -		/*
> -		 * If we are doing synchronous page fault and inode needs fsync,
> -		 * we can insert PTE into page tables only after that happens.
> -		 * Skip insertion for now and return the pfn so that caller can
> -		 * insert it after fsync is done.
> -		 */
>  		if (sync) {
> -			if (WARN_ON_ONCE(!pfnp)) {
> -				error = -EIO;
> -				goto error_finish_iomap;
> -			}
> -			*pfnp = pfn;
> -			ret = VM_FAULT_NEEDDSYNC | major;
> +			ret = dax_fault_synchronous_pfnp(pfnp, pfn);

I commented on the previous version...  So I'll ask here too.

Why is it ok to drop 'major' here?

Ira
ruansy.fnst@fujitsu.com April 27, 2021, 2:44 a.m. UTC | #2
> -----Original Message-----
> From: Ira Weiny <ira.weiny@intel.com>
> Sent: Tuesday, April 27, 2021 7:38 AM
> Subject: Re: [PATCH v3 1/3] fsdax: Factor helpers to simplify dax fault code
> 
> On Thu, Apr 22, 2021 at 09:44:59PM +0800, Shiyang Ruan wrote:
> > The dax page fault code is too long and a bit difficult to read. And
> > it is hard to understand when we trying to add new features. Some of
> > the PTE/PMD codes have similar logic. So, factor them as helper
> > functions to simplify the code.
> >
> > Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
> > Reviewed-by: Christoph Hellwig <hch@lst.de>
> > Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
> > ---
> >  fs/dax.c | 153
> > ++++++++++++++++++++++++++++++-------------------------
> >  1 file changed, 84 insertions(+), 69 deletions(-)
> >
> > diff --git a/fs/dax.c b/fs/dax.c
> > index b3d27fdc6775..f843fb8fbbf1 100644
> > --- a/fs/dax.c
> > +++ b/fs/dax.c
> 
> [snip]
> 
> > @@ -1355,19 +1379,8 @@ static vm_fault_t dax_iomap_pte_fault(struct
> vm_fault *vmf, pfn_t *pfnp,
> >  		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
> >  						 0, write && !sync);
> >
> > -		/*
> > -		 * If we are doing synchronous page fault and inode needs fsync,
> > -		 * we can insert PTE into page tables only after that happens.
> > -		 * Skip insertion for now and return the pfn so that caller can
> > -		 * insert it after fsync is done.
> > -		 */
> >  		if (sync) {
> > -			if (WARN_ON_ONCE(!pfnp)) {
> > -				error = -EIO;
> > -				goto error_finish_iomap;
> > -			}
> > -			*pfnp = pfn;
> > -			ret = VM_FAULT_NEEDDSYNC | major;
> > +			ret = dax_fault_synchronous_pfnp(pfnp, pfn);
> 
> I commented on the previous version...  So I'll ask here too.
> 
> Why is it ok to drop 'major' here?

This dax_iomap_pte_fault () finally returns 'ret | major', so I think the major here is not dropped.  The origin code seems OR the return value and major twice.


--
Thanks,
Ruan Shiyang.

> 
> Ira
Ira Weiny April 27, 2021, 4:34 p.m. UTC | #3
On Tue, Apr 27, 2021 at 02:44:33AM +0000, ruansy.fnst@fujitsu.com wrote:
> > -----Original Message-----
> > From: Ira Weiny <ira.weiny@intel.com>
> > Sent: Tuesday, April 27, 2021 7:38 AM
> > Subject: Re: [PATCH v3 1/3] fsdax: Factor helpers to simplify dax fault code
> > 
> > On Thu, Apr 22, 2021 at 09:44:59PM +0800, Shiyang Ruan wrote:
> > > The dax page fault code is too long and a bit difficult to read. And
> > > it is hard to understand when we trying to add new features. Some of
> > > the PTE/PMD codes have similar logic. So, factor them as helper
> > > functions to simplify the code.
> > >
> > > Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
> > > Reviewed-by: Christoph Hellwig <hch@lst.de>
> > > Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
> > > ---
> > >  fs/dax.c | 153
> > > ++++++++++++++++++++++++++++++-------------------------
> > >  1 file changed, 84 insertions(+), 69 deletions(-)
> > >
> > > diff --git a/fs/dax.c b/fs/dax.c
> > > index b3d27fdc6775..f843fb8fbbf1 100644
> > > --- a/fs/dax.c
> > > +++ b/fs/dax.c
> > 
> > [snip]
> > 
> > > @@ -1355,19 +1379,8 @@ static vm_fault_t dax_iomap_pte_fault(struct
> > vm_fault *vmf, pfn_t *pfnp,
> > >  		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
> > >  						 0, write && !sync);
> > >
> > > -		/*
> > > -		 * If we are doing synchronous page fault and inode needs fsync,
> > > -		 * we can insert PTE into page tables only after that happens.
> > > -		 * Skip insertion for now and return the pfn so that caller can
> > > -		 * insert it after fsync is done.
> > > -		 */
> > >  		if (sync) {
> > > -			if (WARN_ON_ONCE(!pfnp)) {
> > > -				error = -EIO;
> > > -				goto error_finish_iomap;
> > > -			}
> > > -			*pfnp = pfn;
> > > -			ret = VM_FAULT_NEEDDSYNC | major;
> > > +			ret = dax_fault_synchronous_pfnp(pfnp, pfn);
> > 
> > I commented on the previous version...  So I'll ask here too.
> > 
> > Why is it ok to drop 'major' here?
> 
> This dax_iomap_pte_fault () finally returns 'ret | major', so I think the major here is not dropped.  The origin code seems OR the return value and major twice.
> 

Thanks I missed that!
Ira
diff mbox series

Patch

diff --git a/fs/dax.c b/fs/dax.c
index b3d27fdc6775..f843fb8fbbf1 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -1244,6 +1244,53 @@  static bool dax_fault_is_synchronous(unsigned long flags,
 		&& (iomap->flags & IOMAP_F_DIRTY);
 }
 
+/*
+ * If we are doing synchronous page fault and inode needs fsync, we can insert
+ * PTE/PMD into page tables only after that happens. Skip insertion for now and
+ * return the pfn so that caller can insert it after fsync is done.
+ */
+static vm_fault_t dax_fault_synchronous_pfnp(pfn_t *pfnp, pfn_t pfn)
+{
+	if (WARN_ON_ONCE(!pfnp))
+		return VM_FAULT_SIGBUS;
+
+	*pfnp = pfn;
+	return VM_FAULT_NEEDDSYNC;
+}
+
+static vm_fault_t dax_fault_cow_page(struct vm_fault *vmf, struct iomap *iomap,
+		loff_t pos)
+{
+	int error = 0;
+	vm_fault_t ret;
+	unsigned long vaddr = vmf->address;
+	sector_t sector = dax_iomap_sector(iomap, pos);
+
+	switch (iomap->type) {
+	case IOMAP_HOLE:
+	case IOMAP_UNWRITTEN:
+		clear_user_highpage(vmf->cow_page, vaddr);
+		break;
+	case IOMAP_MAPPED:
+		error = copy_cow_page_dax(iomap->bdev, iomap->dax_dev,
+						sector, vmf->cow_page, vaddr);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		error = -EIO;
+		break;
+	}
+
+	if (error)
+		return dax_fault_return(error);
+
+	__SetPageUptodate(vmf->cow_page);
+	ret = finish_fault(vmf);
+	if (!ret)
+		ret = VM_FAULT_DONE_COW;
+	return ret;
+}
+
 static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
 			       int *iomap_errp, const struct iomap_ops *ops)
 {
@@ -1312,30 +1359,7 @@  static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
 	}
 
 	if (vmf->cow_page) {
-		sector_t sector = dax_iomap_sector(&iomap, pos);
-
-		switch (iomap.type) {
-		case IOMAP_HOLE:
-		case IOMAP_UNWRITTEN:
-			clear_user_highpage(vmf->cow_page, vaddr);
-			break;
-		case IOMAP_MAPPED:
-			error = copy_cow_page_dax(iomap.bdev, iomap.dax_dev,
-						  sector, vmf->cow_page, vaddr);
-			break;
-		default:
-			WARN_ON_ONCE(1);
-			error = -EIO;
-			break;
-		}
-
-		if (error)
-			goto error_finish_iomap;
-
-		__SetPageUptodate(vmf->cow_page);
-		ret = finish_fault(vmf);
-		if (!ret)
-			ret = VM_FAULT_DONE_COW;
+		ret = dax_fault_cow_page(vmf, &iomap, pos);
 		goto finish_iomap;
 	}
 
@@ -1355,19 +1379,8 @@  static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
 		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
 						 0, write && !sync);
 
-		/*
-		 * If we are doing synchronous page fault and inode needs fsync,
-		 * we can insert PTE into page tables only after that happens.
-		 * Skip insertion for now and return the pfn so that caller can
-		 * insert it after fsync is done.
-		 */
 		if (sync) {
-			if (WARN_ON_ONCE(!pfnp)) {
-				error = -EIO;
-				goto error_finish_iomap;
-			}
-			*pfnp = pfn;
-			ret = VM_FAULT_NEEDDSYNC | major;
+			ret = dax_fault_synchronous_pfnp(pfnp, pfn);
 			goto finish_iomap;
 		}
 		trace_dax_insert_mapping(inode, vmf, entry);
@@ -1466,13 +1479,45 @@  static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
 	return VM_FAULT_FALLBACK;
 }
 
+static bool dax_fault_check_fallback(struct vm_fault *vmf, struct xa_state *xas,
+		pgoff_t max_pgoff)
+{
+	unsigned long pmd_addr = vmf->address & PMD_MASK;
+	bool write = vmf->flags & FAULT_FLAG_WRITE;
+
+	/*
+	 * Make sure that the faulting address's PMD offset (color) matches
+	 * the PMD offset from the start of the file.  This is necessary so
+	 * that a PMD range in the page table overlaps exactly with a PMD
+	 * range in the page cache.
+	 */
+	if ((vmf->pgoff & PG_PMD_COLOUR) !=
+	    ((vmf->address >> PAGE_SHIFT) & PG_PMD_COLOUR))
+		return true;
+
+	/* Fall back to PTEs if we're going to COW */
+	if (write && !(vmf->vma->vm_flags & VM_SHARED))
+		return true;
+
+	/* If the PMD would extend outside the VMA */
+	if (pmd_addr < vmf->vma->vm_start)
+		return true;
+	if ((pmd_addr + PMD_SIZE) > vmf->vma->vm_end)
+		return true;
+
+	/* If the PMD would extend beyond the file size */
+	if ((xas->xa_index | PG_PMD_COLOUR) >= max_pgoff)
+		return true;
+
+	return false;
+}
+
 static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
 			       const struct iomap_ops *ops)
 {
 	struct vm_area_struct *vma = vmf->vma;
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	XA_STATE_ORDER(xas, &mapping->i_pages, vmf->pgoff, PMD_ORDER);
-	unsigned long pmd_addr = vmf->address & PMD_MASK;
 	bool write = vmf->flags & FAULT_FLAG_WRITE;
 	bool sync;
 	unsigned int iomap_flags = (write ? IOMAP_WRITE : 0) | IOMAP_FAULT;
@@ -1495,33 +1540,12 @@  static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
 
 	trace_dax_pmd_fault(inode, vmf, max_pgoff, 0);
 
-	/*
-	 * Make sure that the faulting address's PMD offset (color) matches
-	 * the PMD offset from the start of the file.  This is necessary so
-	 * that a PMD range in the page table overlaps exactly with a PMD
-	 * range in the page cache.
-	 */
-	if ((vmf->pgoff & PG_PMD_COLOUR) !=
-	    ((vmf->address >> PAGE_SHIFT) & PG_PMD_COLOUR))
-		goto fallback;
-
-	/* Fall back to PTEs if we're going to COW */
-	if (write && !(vma->vm_flags & VM_SHARED))
-		goto fallback;
-
-	/* If the PMD would extend outside the VMA */
-	if (pmd_addr < vma->vm_start)
-		goto fallback;
-	if ((pmd_addr + PMD_SIZE) > vma->vm_end)
-		goto fallback;
-
 	if (xas.xa_index >= max_pgoff) {
 		result = VM_FAULT_SIGBUS;
 		goto out;
 	}
 
-	/* If the PMD would extend beyond the file size */
-	if ((xas.xa_index | PG_PMD_COLOUR) >= max_pgoff)
+	if (dax_fault_check_fallback(vmf, &xas, max_pgoff))
 		goto fallback;
 
 	/*
@@ -1573,17 +1597,8 @@  static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
 		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
 						DAX_PMD, write && !sync);
 
-		/*
-		 * If we are doing synchronous page fault and inode needs fsync,
-		 * we can insert PMD into page tables only after that happens.
-		 * Skip insertion for now and return the pfn so that caller can
-		 * insert it after fsync is done.
-		 */
 		if (sync) {
-			if (WARN_ON_ONCE(!pfnp))
-				goto finish_iomap;
-			*pfnp = pfn;
-			result = VM_FAULT_NEEDDSYNC;
+			result = dax_fault_synchronous_pfnp(pfnp, pfn);
 			goto finish_iomap;
 		}