diff mbox series

[RFC,v2,03/16] iomap: use iomap_page_create_gfp() in __iomap_write_begin

Message ID 20220516164718.2419891-4-shr@fb.com (mailing list archive)
State New, archived
Headers show
Series io-uring/xfs: support async buffered writes | expand

Commit Message

Stefan Roesch May 16, 2022, 4:47 p.m. UTC
This change uses the new iomap_page_create_gfp() function in the
function __iomap_write_begin().

No intended functional changes in this patch.

Signed-off-by: Stefan Roesch <shr@fb.com>
---
 fs/iomap/buffered-io.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Matthew Wilcox May 16, 2022, 11:58 p.m. UTC | #1
On Mon, May 16, 2022 at 09:47:05AM -0700, Stefan Roesch wrote:
> This change uses the new iomap_page_create_gfp() function in the
> function __iomap_write_begin().
> 
> No intended functional changes in this patch.

But there is one.  I don't know if it's harmful or not.

>  	const struct iomap *srcmap = iomap_iter_srcmap(iter);
> -	struct iomap_page *iop = iomap_page_create(iter->inode, folio);
> +	struct iomap_page *iop = to_iomap_page(folio);
>  	loff_t block_size = i_blocksize(iter->inode);
>  	loff_t block_start = round_down(pos, block_size);
>  	loff_t block_end = round_up(pos + len, block_size);
> +	unsigned int nr_blocks = i_blocks_per_folio(iter->inode, folio);
>  	size_t from = offset_in_folio(folio, pos), to = from + len;
>  	size_t poff, plen;
> +	gfp_t  gfp = GFP_NOFS | __GFP_NOFAIL;

For the case where the folio is already uptodate, would need an iop to
be written back (ie nr_blocks > 1) but doesn't have an iop, we used to
create one here, and now we don't.

How much testing has this seen with blocksize < 4k?

>  	if (folio_test_uptodate(folio))
>  		return 0;
>  	folio_clear_error(folio);
>  
> +	if (!iop && nr_blocks > 1)
> +		iop = iomap_page_create_gfp(iter->inode, folio, nr_blocks, gfp);
> +
>  	do {
>  		iomap_adjust_read_range(iter->inode, folio, &block_start,
>  				block_end - block_start, &poff, &plen);
> -- 
> 2.30.2
> 
>
Stefan Roesch May 18, 2022, 11:21 p.m. UTC | #2
On 5/16/22 4:58 PM, Matthew Wilcox wrote:
> On Mon, May 16, 2022 at 09:47:05AM -0700, Stefan Roesch wrote:
>> This change uses the new iomap_page_create_gfp() function in the
>> function __iomap_write_begin().
>>
>> No intended functional changes in this patch.
> 
> But there is one.  I don't know if it's harmful or not.
> 
>>  	const struct iomap *srcmap = iomap_iter_srcmap(iter);
>> -	struct iomap_page *iop = iomap_page_create(iter->inode, folio);
>> +	struct iomap_page *iop = to_iomap_page(folio);
>>  	loff_t block_size = i_blocksize(iter->inode);
>>  	loff_t block_start = round_down(pos, block_size);
>>  	loff_t block_end = round_up(pos + len, block_size);
>> +	unsigned int nr_blocks = i_blocks_per_folio(iter->inode, folio);
>>  	size_t from = offset_in_folio(folio, pos), to = from + len;
>>  	size_t poff, plen;
>> +	gfp_t  gfp = GFP_NOFS | __GFP_NOFAIL;
> 
> For the case where the folio is already uptodate, would need an iop to
> be written back (ie nr_blocks > 1) but doesn't have an iop, we used to
> create one here, and now we don't.

The next version of the patch series will remove the 
	if (!iop && nr_blocks > 1)
check.

> 
> How much testing has this seen with blocksize < 4k?
> 
>>  	if (folio_test_uptodate(folio))
>>  		return 0;
>>  	folio_clear_error(folio);
>>  
>> +	if (!iop && nr_blocks > 1)
>> +		iop = iomap_page_create_gfp(iter->inode, folio, nr_blocks, gfp);
>> +
>>  	do {
>>  		iomap_adjust_read_range(iter->inode, folio, &block_start,
>>  				block_end - block_start, &poff, &plen);
>> -- 
>> 2.30.2
>>
>>
diff mbox series

Patch

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 85aa32f50db0..1ffdc7078e7d 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -572,17 +572,22 @@  static int __iomap_write_begin(const struct iomap_iter *iter, loff_t pos,
 		size_t len, struct folio *folio)
 {
 	const struct iomap *srcmap = iomap_iter_srcmap(iter);
-	struct iomap_page *iop = iomap_page_create(iter->inode, folio);
+	struct iomap_page *iop = to_iomap_page(folio);
 	loff_t block_size = i_blocksize(iter->inode);
 	loff_t block_start = round_down(pos, block_size);
 	loff_t block_end = round_up(pos + len, block_size);
+	unsigned int nr_blocks = i_blocks_per_folio(iter->inode, folio);
 	size_t from = offset_in_folio(folio, pos), to = from + len;
 	size_t poff, plen;
+	gfp_t  gfp = GFP_NOFS | __GFP_NOFAIL;
 
 	if (folio_test_uptodate(folio))
 		return 0;
 	folio_clear_error(folio);
 
+	if (!iop && nr_blocks > 1)
+		iop = iomap_page_create_gfp(iter->inode, folio, nr_blocks, gfp);
+
 	do {
 		iomap_adjust_read_range(iter->inode, folio, &block_start,
 				block_end - block_start, &poff, &plen);