diff mbox series

[man-pages,RFC,v2] statx.2, open.2: document STATX_DIOALIGN

Message ID 20220722074229.148925-1-ebiggers@kernel.org (mailing list archive)
State New, archived
Headers show
Series [man-pages,RFC,v2] statx.2, open.2: document STATX_DIOALIGN | expand

Commit Message

Eric Biggers July 22, 2022, 7:42 a.m. UTC
From: Eric Biggers <ebiggers@google.com>

Document the proposed STATX_DIOALIGN support for statx()
(https://lore.kernel.org/linux-fsdevel/20220722071228.146690-1-ebiggers@kernel.org/T/#u).

Signed-off-by: Eric Biggers <ebiggers@google.com>
---

v2: rebased onto man-pages master branch, mentioned xfs, and updated
    link to patchset

 man2/open.2  | 43 ++++++++++++++++++++++++++++++++-----------
 man2/statx.2 | 29 +++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+), 11 deletions(-)


base-commit: f9f25914e4ed393ac284ab921876e8a78722c504

Comments

Darrick J. Wong July 22, 2022, 4:31 p.m. UTC | #1
On Fri, Jul 22, 2022 at 12:42:28AM -0700, Eric Biggers wrote:
> From: Eric Biggers <ebiggers@google.com>
> 
> Document the proposed STATX_DIOALIGN support for statx()
> (https://lore.kernel.org/linux-fsdevel/20220722071228.146690-1-ebiggers@kernel.org/T/#u).
> 
> Signed-off-by: Eric Biggers <ebiggers@google.com>
> ---
> 
> v2: rebased onto man-pages master branch, mentioned xfs, and updated
>     link to patchset
> 
>  man2/open.2  | 43 ++++++++++++++++++++++++++++++++-----------
>  man2/statx.2 | 29 +++++++++++++++++++++++++++++
>  2 files changed, 61 insertions(+), 11 deletions(-)
> 
> diff --git a/man2/open.2 b/man2/open.2
> index d1485999f..ef29847c3 100644
> --- a/man2/open.2
> +++ b/man2/open.2
> @@ -1732,21 +1732,42 @@ of user-space buffers and the file offset of I/Os.
>  In Linux alignment
>  restrictions vary by filesystem and kernel version and might be
>  absent entirely.
> -However there is currently no filesystem\-independent
> -interface for an application to discover these restrictions for a given
> -file or filesystem.
> -Some filesystems provide their own interfaces
> -for doing so, for example the
> +The handling of misaligned
> +.B O_DIRECT
> +I/Os also varies; they can either fail with
> +.B EINVAL
> +or fall back to buffered I/O.
> +.PP
> +Since Linux 5.20,
> +.B O_DIRECT
> +support and alignment restrictions for a file can be queried using
> +.BR statx (2),
> +using the
> +.B STATX_DIOALIGN
> +flag.
> +Support for
> +.B STATX_DIOALIGN
> +varies by filesystem; see
> +.BR statx (2).
> +.PP
> +Some filesystems provide their own interfaces for querying
> +.B O_DIRECT
> +alignment restrictions, for example the
>  .B XFS_IOC_DIOINFO
>  operation in
>  .BR xfsctl (3).
> +.B STATX_DIOALIGN
> +should be used instead when it is available.
>  .PP
> -Under Linux 2.4, transfer sizes, the alignment of the user buffer,
> -and the file offset must all be multiples of the logical block size
> -of the filesystem.
> -Since Linux 2.6.0, alignment to the logical block size of the
> -underlying storage (typically 512 bytes) suffices.
> -The logical block size can be determined using the
> +If none of the above is available, then direct I/O support and alignment
> +restrictions can only be assumed from known characteristics of the filesystem,
> +the individual file, the underlying storage device(s), and the kernel version.
> +In Linux 2.4, most block device based filesystems require that the file offset
> +and the length and memory address of all I/O segments be multiples of the
> +filesystem block size (typically 4096 bytes).
> +In Linux 2.6.0, this was relaxed to the logical block size of the block device
> +(typically 512 bytes).
> +A block device's logical block size can be determined using the
>  .BR ioctl (2)
>  .B BLKSSZGET
>  operation or from the shell using the command:
> diff --git a/man2/statx.2 b/man2/statx.2
> index 0326e9af0..ea38ec829 100644
> --- a/man2/statx.2
> +++ b/man2/statx.2
> @@ -61,7 +61,12 @@ struct statx {
>         containing the filesystem where the file resides */
>      __u32 stx_dev_major;   /* Major ID */
>      __u32 stx_dev_minor;   /* Minor ID */
> +
>      __u64 stx_mnt_id;      /* Mount ID */
> +
> +    /* Direct I/O alignment restrictions */
> +    __u32 stx_dio_mem_align;
> +    __u32 stx_dio_offset_align;
>  };
>  .EE
>  .in
> @@ -247,6 +252,8 @@ STATX_BTIME	Want stx_btime
>  STATX_ALL	The same as STATX_BASIC_STATS | STATX_BTIME.
>  	It is deprecated and should not be used.
>  STATX_MNT_ID	Want stx_mnt_id (since Linux 5.8)
> +STATX_DIOALIGN	Want stx_dio_mem_align and stx_dio_offset_align
> +	(since Linux 5.20; support varies by filesystem)
>  .TE
>  .in
>  .PP
> @@ -407,6 +414,28 @@ This is the same number reported by
>  .BR name_to_handle_at (2)
>  and corresponds to the number in the first field in one of the records in
>  .IR /proc/self/mountinfo .
> +.TP
> +.I stx_dio_mem_align
> +The alignment (in bytes) required for user memory buffers for direct I/O
> +.BR "" ( O_DIRECT )
> +on this file. or 0 if direct I/O is not supported on this file.

Nit: "..on this file, or 0 if direct..."

> +.IP
> +.B STATX_DIOALIGN
> +.IR "" ( stx_dio_mem_align
> +and
> +.IR stx_dio_offset_align )
> +is supported on block devices since Linux 5.20.
> +The support on regular files varies by filesystem; it is supported by ext4,
> +f2fs, and xfs since Linux 5.20.
> +.TP
> +.I stx_dio_offset_align
> +The alignment (in bytes) required for file offsets and I/O segment lengths for
> +direct I/O
> +.BR "" ( O_DIRECT )
> +on this file, or 0 if direct I/O is not supported on this file.

On this last part -- userspace can only conclude that directio is not
supported on the file if ((STATX_DIOALIGN & stx_mask) &&
stx_dio_offset_align == 0), right?

IOWs, if (STATX_DIOALIGN & stx_mask)==0 then userspace can't draw any
conclusions from stx_dio_offset_align, correct?

If the answers are yes and yes, then I think I've understood all this
and can say
Reviewed-by: Darrick J. Wong <djwong@kernel.org>

--D


> +This will only be nonzero if
> +.I stx_dio_mem_align
> +is nonzero, and vice versa.
>  .PP
>  For further information on the above fields, see
>  .BR inode (7).
> 
> base-commit: f9f25914e4ed393ac284ab921876e8a78722c504
> -- 
> 2.37.0
>
diff mbox series

Patch

diff --git a/man2/open.2 b/man2/open.2
index d1485999f..ef29847c3 100644
--- a/man2/open.2
+++ b/man2/open.2
@@ -1732,21 +1732,42 @@  of user-space buffers and the file offset of I/Os.
 In Linux alignment
 restrictions vary by filesystem and kernel version and might be
 absent entirely.
-However there is currently no filesystem\-independent
-interface for an application to discover these restrictions for a given
-file or filesystem.
-Some filesystems provide their own interfaces
-for doing so, for example the
+The handling of misaligned
+.B O_DIRECT
+I/Os also varies; they can either fail with
+.B EINVAL
+or fall back to buffered I/O.
+.PP
+Since Linux 5.20,
+.B O_DIRECT
+support and alignment restrictions for a file can be queried using
+.BR statx (2),
+using the
+.B STATX_DIOALIGN
+flag.
+Support for
+.B STATX_DIOALIGN
+varies by filesystem; see
+.BR statx (2).
+.PP
+Some filesystems provide their own interfaces for querying
+.B O_DIRECT
+alignment restrictions, for example the
 .B XFS_IOC_DIOINFO
 operation in
 .BR xfsctl (3).
+.B STATX_DIOALIGN
+should be used instead when it is available.
 .PP
-Under Linux 2.4, transfer sizes, the alignment of the user buffer,
-and the file offset must all be multiples of the logical block size
-of the filesystem.
-Since Linux 2.6.0, alignment to the logical block size of the
-underlying storage (typically 512 bytes) suffices.
-The logical block size can be determined using the
+If none of the above is available, then direct I/O support and alignment
+restrictions can only be assumed from known characteristics of the filesystem,
+the individual file, the underlying storage device(s), and the kernel version.
+In Linux 2.4, most block device based filesystems require that the file offset
+and the length and memory address of all I/O segments be multiples of the
+filesystem block size (typically 4096 bytes).
+In Linux 2.6.0, this was relaxed to the logical block size of the block device
+(typically 512 bytes).
+A block device's logical block size can be determined using the
 .BR ioctl (2)
 .B BLKSSZGET
 operation or from the shell using the command:
diff --git a/man2/statx.2 b/man2/statx.2
index 0326e9af0..ea38ec829 100644
--- a/man2/statx.2
+++ b/man2/statx.2
@@ -61,7 +61,12 @@  struct statx {
        containing the filesystem where the file resides */
     __u32 stx_dev_major;   /* Major ID */
     __u32 stx_dev_minor;   /* Minor ID */
+
     __u64 stx_mnt_id;      /* Mount ID */
+
+    /* Direct I/O alignment restrictions */
+    __u32 stx_dio_mem_align;
+    __u32 stx_dio_offset_align;
 };
 .EE
 .in
@@ -247,6 +252,8 @@  STATX_BTIME	Want stx_btime
 STATX_ALL	The same as STATX_BASIC_STATS | STATX_BTIME.
 	It is deprecated and should not be used.
 STATX_MNT_ID	Want stx_mnt_id (since Linux 5.8)
+STATX_DIOALIGN	Want stx_dio_mem_align and stx_dio_offset_align
+	(since Linux 5.20; support varies by filesystem)
 .TE
 .in
 .PP
@@ -407,6 +414,28 @@  This is the same number reported by
 .BR name_to_handle_at (2)
 and corresponds to the number in the first field in one of the records in
 .IR /proc/self/mountinfo .
+.TP
+.I stx_dio_mem_align
+The alignment (in bytes) required for user memory buffers for direct I/O
+.BR "" ( O_DIRECT )
+on this file. or 0 if direct I/O is not supported on this file.
+.IP
+.B STATX_DIOALIGN
+.IR "" ( stx_dio_mem_align
+and
+.IR stx_dio_offset_align )
+is supported on block devices since Linux 5.20.
+The support on regular files varies by filesystem; it is supported by ext4,
+f2fs, and xfs since Linux 5.20.
+.TP
+.I stx_dio_offset_align
+The alignment (in bytes) required for file offsets and I/O segment lengths for
+direct I/O
+.BR "" ( O_DIRECT )
+on this file, or 0 if direct I/O is not supported on this file.
+This will only be nonzero if
+.I stx_dio_mem_align
+is nonzero, and vice versa.
 .PP
 For further information on the above fields, see
 .BR inode (7).