| Message ID | 20230731215021.70911-1-lstoakes@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions | expand |
On Mon, Jul 31, 2023 at 10:50:21PM +0100, Lorenzo Stoakes wrote: > Some architectures do not populate the entire range categorised by > KCORE_TEXT, so we must ensure that the kernel address we read from is > valid. > > Unfortunately there is no solution currently available to do so with a > purely iterator solution so reinstate the bounce buffer in this instance so > we can use copy_from_kernel_nofault() in order to avoid page faults when > regions are unmapped. > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > the code to continue to use an iterator. > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > Reported-by: Jiri Olsa <olsajiri@gmail.com> it fixed my issue, thanks Tested-by: Jiri Olsa <jolsa@kernel.org> jirka > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > Cc: stable@vger.kernel.org > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > --- > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > index 9cb32e1a78a0..3bc689038232 100644 > --- a/fs/proc/kcore.c > +++ b/fs/proc/kcore.c > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > { > + struct file *file = iocb->ki_filp; > + char *buf = file->private_data; > loff_t *fpos = &iocb->ki_pos; > size_t phdrs_offset, notes_offset, data_offset; > size_t page_offline_frozen = 1; > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > fallthrough; > case KCORE_VMEMMAP: > case KCORE_TEXT: > + /* > + * Sadly we must use a bounce buffer here to be able to > + * make use of copy_from_kernel_nofault(), as these > + * memory regions might not always be mapped on all > + * architectures. > + */ > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > + if (iov_iter_zero(tsz, iter) != tsz) { > + ret = -EFAULT; > + goto out; > + } > /* > * We use _copy_to_iter() to bypass usermode hardening > * which would otherwise prevent this operation. > */ > - if (_copy_to_iter((char *)start, tsz, iter) != tsz) { > + } else if (_copy_to_iter(buf, tsz, iter) != tsz) { > ret = -EFAULT; > goto out; > } > @@ -595,6 +608,10 @@ static int open_kcore(struct inode *inode, struct file *filp) > if (ret) > return ret; > > + filp->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL); > + if (!filp->private_data) > + return -ENOMEM; > + > if (kcore_need_update) > kcore_update_ram(); > if (i_size_read(inode) != proc_root_kcore->size) { > @@ -605,9 +622,16 @@ static int open_kcore(struct inode *inode, struct file *filp) > return 0; > } > > +static int release_kcore(struct inode *inode, struct file *file) > +{ > + kfree(file->private_data); > + return 0; > +} > + > static const struct proc_ops kcore_proc_ops = { > .proc_read_iter = read_kcore_iter, > .proc_open = open_kcore, > + .proc_release = release_kcore, > .proc_lseek = default_llseek, > }; > > -- > 2.41.0 >
On Mon, Jul 31, 2023 at 10:50:21PM +0100, Lorenzo Stoakes wrote: > Some architectures do not populate the entire range categorised by > KCORE_TEXT, so we must ensure that the kernel address we read from is > valid. > > Unfortunately there is no solution currently available to do so with a > purely iterator solution so reinstate the bounce buffer in this instance so > we can use copy_from_kernel_nofault() in order to avoid page faults when > regions are unmapped. > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > the code to continue to use an iterator. > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > Reported-by: Jiri Olsa <olsajiri@gmail.com> > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > Cc: stable@vger.kernel.org > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > --- > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) Tested-by: Will Deacon <will@kernel.org> I can confirm this fixes the arm64 issue reported by Mike over at [1]. Cheers, Will [1] https://lore.kernel.org/r/b39c62d29a431b023e98959578ba87e96af0e030.camel@gmx.de
On 31.07.23 23:50, Lorenzo Stoakes wrote: > Some architectures do not populate the entire range categorised by > KCORE_TEXT, so we must ensure that the kernel address we read from is > valid. > > Unfortunately there is no solution currently available to do so with a > purely iterator solution so reinstate the bounce buffer in this instance so > we can use copy_from_kernel_nofault() in order to avoid page faults when > regions are unmapped. > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > the code to continue to use an iterator. > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > Reported-by: Jiri Olsa <olsajiri@gmail.com> > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > Cc: stable@vger.kernel.org > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > --- > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > index 9cb32e1a78a0..3bc689038232 100644 > --- a/fs/proc/kcore.c > +++ b/fs/proc/kcore.c > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > { > + struct file *file = iocb->ki_filp; > + char *buf = file->private_data; > loff_t *fpos = &iocb->ki_pos; > size_t phdrs_offset, notes_offset, data_offset; > size_t page_offline_frozen = 1; > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > fallthrough; > case KCORE_VMEMMAP: > case KCORE_TEXT: > + /* > + * Sadly we must use a bounce buffer here to be able to > + * make use of copy_from_kernel_nofault(), as these > + * memory regions might not always be mapped on all > + * architectures. > + */ > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > + if (iov_iter_zero(tsz, iter) != tsz) { > + ret = -EFAULT; > + goto out; > + } > /* > * We use _copy_to_iter() to bypass usermode hardening > * which would otherwise prevent this operation. > */ Having a comment at this indentation level looks for the else case looks kind of weird. (does that comment still apply?)
On 07/31/23 at 10:50pm, Lorenzo Stoakes wrote: > Some architectures do not populate the entire range categorised by > KCORE_TEXT, so we must ensure that the kernel address we read from is > valid. > > Unfortunately there is no solution currently available to do so with a > purely iterator solution so reinstate the bounce buffer in this instance so > we can use copy_from_kernel_nofault() in order to avoid page faults when > regions are unmapped. > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > the code to continue to use an iterator. > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > Reported-by: Jiri Olsa <olsajiri@gmail.com> > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > Cc: stable@vger.kernel.org > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > --- > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > index 9cb32e1a78a0..3bc689038232 100644 > --- a/fs/proc/kcore.c > +++ b/fs/proc/kcore.c > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > { > + struct file *file = iocb->ki_filp; > + char *buf = file->private_data; > loff_t *fpos = &iocb->ki_pos; > size_t phdrs_offset, notes_offset, data_offset; > size_t page_offline_frozen = 1; > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > fallthrough; > case KCORE_VMEMMAP: > case KCORE_TEXT: > + /* > + * Sadly we must use a bounce buffer here to be able to > + * make use of copy_from_kernel_nofault(), as these > + * memory regions might not always be mapped on all > + * architectures. > + */ > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > + if (iov_iter_zero(tsz, iter) != tsz) { > + ret = -EFAULT; > + goto out; > + } > /* > * We use _copy_to_iter() to bypass usermode hardening > * which would otherwise prevent this operation. > */ > - if (_copy_to_iter((char *)start, tsz, iter) != tsz) { > + } else if (_copy_to_iter(buf, tsz, iter) != tsz) { > ret = -EFAULT; > goto out; > } > @@ -595,6 +608,10 @@ static int open_kcore(struct inode *inode, struct file *filp) > if (ret) > return ret; > > + filp->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL); > + if (!filp->private_data) > + return -ENOMEM; > + > if (kcore_need_update) > kcore_update_ram(); > if (i_size_read(inode) != proc_root_kcore->size) { > @@ -605,9 +622,16 @@ static int open_kcore(struct inode *inode, struct file *filp) > return 0; > } > > +static int release_kcore(struct inode *inode, struct file *file) > +{ > + kfree(file->private_data); > + return 0; > +} > + > static const struct proc_ops kcore_proc_ops = { > .proc_read_iter = read_kcore_iter, > .proc_open = open_kcore, > + .proc_release = release_kcore, > .proc_lseek = default_llseek, > }; On 6.5-rc4, the failures can be reproduced stably on a arm64 machine. With patch applied, both makedumpfile and objdump test cases passed. And the code change looks good to me, thanks. Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Baoquan He <bhe@redhat.com> =============================================== [root@ ~]# makedumpfile --mem-usage /proc/kcore The kernel version is not supported. The makedumpfile operation may be incomplete. TYPE PAGES EXCLUDABLE DESCRIPTION ---------------------------------------------------------------------- ZERO 76234 yes Pages filled with zero NON_PRI_CACHE 147613 yes Cache pages without private flag PRI_CACHE 3847 yes Cache pages with private flag USER 15276 yes User process pages FREE 15809884 yes Free pages KERN_DATA 459950 no Dumpable kernel data page size: 4096 Total pages on system: 16512804 Total size on system: 67636445184 Byte [root@ ~]# objdump -d --start-address=0x^C [root@ ~]# cat /proc/kallsyms | grep ksys_read ffffab3be77229d8 T ksys_readahead ffffab3be782a700 T ksys_read [root@ ~]# objdump -d --start-address=0xffffab3be782a700 --stop-address=0xffffab3be782a710 /proc/kcore /proc/kcore: file format elf64-littleaarch64 Disassembly of section load1: ffffab3be782a700 <load1+0x41a700>: ffffab3be782a700: aa1e03e9 mov x9, x30 ffffab3be782a704: d503201f nop ffffab3be782a708: d503233f paciasp ffffab3be782a70c: a9bc7bfd stp x29, x30, [sp, #-64]! objdump: error: /proc/kcore(load2) is too large (0x7bff70000000 bytes) objdump: Reading section load2 failed because: memory exhausted
On 08/01/23 at 11:57pm, Baoquan He wrote: > On 07/31/23 at 10:50pm, Lorenzo Stoakes wrote: > > Some architectures do not populate the entire range categorised by > > KCORE_TEXT, so we must ensure that the kernel address we read from is > > valid. > > > > Unfortunately there is no solution currently available to do so with a > > purely iterator solution so reinstate the bounce buffer in this instance so > > we can use copy_from_kernel_nofault() in order to avoid page faults when > > regions are unmapped. > > > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > > the code to continue to use an iterator. > > > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > > Reported-by: Jiri Olsa <olsajiri@gmail.com> > > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > > Cc: stable@vger.kernel.org > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > > --- > > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > > 1 file changed, 25 insertions(+), 1 deletion(-) > > > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > > index 9cb32e1a78a0..3bc689038232 100644 > > --- a/fs/proc/kcore.c > > +++ b/fs/proc/kcore.c > > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > { > > + struct file *file = iocb->ki_filp; > > + char *buf = file->private_data; > > loff_t *fpos = &iocb->ki_pos; > > size_t phdrs_offset, notes_offset, data_offset; > > size_t page_offline_frozen = 1; > > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > fallthrough; > > case KCORE_VMEMMAP: > > case KCORE_TEXT: > > + /* > > + * Sadly we must use a bounce buffer here to be able to > > + * make use of copy_from_kernel_nofault(), as these > > + * memory regions might not always be mapped on all > > + * architectures. > > + */ > > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > > + if (iov_iter_zero(tsz, iter) != tsz) { > > + ret = -EFAULT; > > + goto out; > > + } > > /* > > * We use _copy_to_iter() to bypass usermode hardening > > * which would otherwise prevent this operation. > > */ > > - if (_copy_to_iter((char *)start, tsz, iter) != tsz) { > > + } else if (_copy_to_iter(buf, tsz, iter) != tsz) { > > ret = -EFAULT; > > goto out; > > } > > @@ -595,6 +608,10 @@ static int open_kcore(struct inode *inode, struct file *filp) > > if (ret) > > return ret; > > > > + filp->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL); > > + if (!filp->private_data) > > + return -ENOMEM; > > + > > if (kcore_need_update) > > kcore_update_ram(); > > if (i_size_read(inode) != proc_root_kcore->size) { > > @@ -605,9 +622,16 @@ static int open_kcore(struct inode *inode, struct file *filp) > > return 0; > > } > > > > +static int release_kcore(struct inode *inode, struct file *file) > > +{ > > + kfree(file->private_data); > > + return 0; > > +} > > + > > static const struct proc_ops kcore_proc_ops = { > > .proc_read_iter = read_kcore_iter, > > .proc_open = open_kcore, > > + .proc_release = release_kcore, > > .proc_lseek = default_llseek, > > }; > > On 6.5-rc4, the failures can be reproduced stably on a arm64 machine. > With patch applied, both makedumpfile and objdump test cases passed. > > And the code change looks good to me, thanks. > > Tested-by: Baoquan He <bhe@redhat.com> > Reviewed-by: Baoquan He <bhe@redhat.com> > > > =============================================== > [root@ ~]# makedumpfile --mem-usage /proc/kcore > The kernel version is not supported. > The makedumpfile operation may be incomplete. > > TYPE PAGES EXCLUDABLE DESCRIPTION > ---------------------------------------------------------------------- > ZERO 76234 yes Pages filled with zero > NON_PRI_CACHE 147613 yes Cache pages without private flag > PRI_CACHE 3847 yes Cache pages with private flag > USER 15276 yes User process pages > FREE 15809884 yes Free pages > KERN_DATA 459950 no Dumpable kernel data > > page size: 4096 > Total pages on system: 16512804 > Total size on system: 67636445184 Byte > > [root@ ~]# objdump -d --start-address=0x^C > [root@ ~]# cat /proc/kallsyms | grep ksys_read > ffffab3be77229d8 T ksys_readahead > ffffab3be782a700 T ksys_read > [root@ ~]# objdump -d --start-address=0xffffab3be782a700 --stop-address=0xffffab3be782a710 /proc/kcore > > /proc/kcore: file format elf64-littleaarch64 > > > Disassembly of section load1: > > ffffab3be782a700 <load1+0x41a700>: > ffffab3be782a700: aa1e03e9 mov x9, x30 > ffffab3be782a704: d503201f nop > ffffab3be782a708: d503233f paciasp > ffffab3be782a70c: a9bc7bfd stp x29, x30, [sp, #-64]! > objdump: error: /proc/kcore(load2) is too large (0x7bff70000000 bytes) > objdump: Reading section load2 failed because: memory exhausted By the way, I can still see the objdump error saying kcore is too large as above, at the same time there's console printing as below. Haven't checked it's objdump's issue or kernel's. [ 6631.575800] __vm_enough_memory: pid: 5321, comm: objdump, not enough memory for the allocation [ 6631.584469] __vm_enough_memory: pid: 5321, comm: objdump, not enough memory for the allocation
On Wed, Aug 02, 2023 at 12:01:16AM +0800, Baoquan He wrote: > On 08/01/23 at 11:57pm, Baoquan He wrote: > > On 07/31/23 at 10:50pm, Lorenzo Stoakes wrote: > > > Some architectures do not populate the entire range categorised by > > > KCORE_TEXT, so we must ensure that the kernel address we read from is > > > valid. > > > > > > Unfortunately there is no solution currently available to do so with a > > > purely iterator solution so reinstate the bounce buffer in this instance so > > > we can use copy_from_kernel_nofault() in order to avoid page faults when > > > regions are unmapped. > > > > > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > > > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > > > the code to continue to use an iterator. > > > > > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > > > Reported-by: Jiri Olsa <olsajiri@gmail.com> > > > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > > > Cc: stable@vger.kernel.org > > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > > > --- > > > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > > > 1 file changed, 25 insertions(+), 1 deletion(-) > > > > > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > > > index 9cb32e1a78a0..3bc689038232 100644 > > > --- a/fs/proc/kcore.c > > > +++ b/fs/proc/kcore.c > > > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > > > > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > > { > > > + struct file *file = iocb->ki_filp; > > > + char *buf = file->private_data; > > > loff_t *fpos = &iocb->ki_pos; > > > size_t phdrs_offset, notes_offset, data_offset; > > > size_t page_offline_frozen = 1; > > > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > > fallthrough; > > > case KCORE_VMEMMAP: > > > case KCORE_TEXT: > > > + /* > > > + * Sadly we must use a bounce buffer here to be able to > > > + * make use of copy_from_kernel_nofault(), as these > > > + * memory regions might not always be mapped on all > > > + * architectures. > > > + */ > > > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > > > + if (iov_iter_zero(tsz, iter) != tsz) { > > > + ret = -EFAULT; > > > + goto out; > > > + } > > > /* > > > * We use _copy_to_iter() to bypass usermode hardening > > > * which would otherwise prevent this operation. > > > */ > > > - if (_copy_to_iter((char *)start, tsz, iter) != tsz) { > > > + } else if (_copy_to_iter(buf, tsz, iter) != tsz) { > > > ret = -EFAULT; > > > goto out; > > > } > > > @@ -595,6 +608,10 @@ static int open_kcore(struct inode *inode, struct file *filp) > > > if (ret) > > > return ret; > > > > > > + filp->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL); > > > + if (!filp->private_data) > > > + return -ENOMEM; > > > + > > > if (kcore_need_update) > > > kcore_update_ram(); > > > if (i_size_read(inode) != proc_root_kcore->size) { > > > @@ -605,9 +622,16 @@ static int open_kcore(struct inode *inode, struct file *filp) > > > return 0; > > > } > > > > > > +static int release_kcore(struct inode *inode, struct file *file) > > > +{ > > > + kfree(file->private_data); > > > + return 0; > > > +} > > > + > > > static const struct proc_ops kcore_proc_ops = { > > > .proc_read_iter = read_kcore_iter, > > > .proc_open = open_kcore, > > > + .proc_release = release_kcore, > > > .proc_lseek = default_llseek, > > > }; > > > > On 6.5-rc4, the failures can be reproduced stably on a arm64 machine. > > With patch applied, both makedumpfile and objdump test cases passed. > > > > And the code change looks good to me, thanks. > > > > Tested-by: Baoquan He <bhe@redhat.com> > > Reviewed-by: Baoquan He <bhe@redhat.com> Thanks! > > > > > > =============================================== > > [root@ ~]# makedumpfile --mem-usage /proc/kcore > > The kernel version is not supported. > > The makedumpfile operation may be incomplete. > > > > TYPE PAGES EXCLUDABLE DESCRIPTION > > ---------------------------------------------------------------------- > > ZERO 76234 yes Pages filled with zero > > NON_PRI_CACHE 147613 yes Cache pages without private flag > > PRI_CACHE 3847 yes Cache pages with private flag > > USER 15276 yes User process pages > > FREE 15809884 yes Free pages > > KERN_DATA 459950 no Dumpable kernel data > > > > page size: 4096 > > Total pages on system: 16512804 > > Total size on system: 67636445184 Byte > > > > [root@ ~]# objdump -d --start-address=0x^C > > [root@ ~]# cat /proc/kallsyms | grep ksys_read > > ffffab3be77229d8 T ksys_readahead > > ffffab3be782a700 T ksys_read > > [root@ ~]# objdump -d --start-address=0xffffab3be782a700 --stop-address=0xffffab3be782a710 /proc/kcore > > > > /proc/kcore: file format elf64-littleaarch64 > > > > > > Disassembly of section load1: > > > > ffffab3be782a700 <load1+0x41a700>: > > ffffab3be782a700: aa1e03e9 mov x9, x30 > > ffffab3be782a704: d503201f nop > > ffffab3be782a708: d503233f paciasp > > ffffab3be782a70c: a9bc7bfd stp x29, x30, [sp, #-64]! > > objdump: error: /proc/kcore(load2) is too large (0x7bff70000000 bytes) > > objdump: Reading section load2 failed because: memory exhausted > > By the way, I can still see the objdump error saying kcore is too large > as above, at the same time there's console printing as below. Haven't > checked it's objdump's issue or kernel's. > > [ 6631.575800] __vm_enough_memory: pid: 5321, comm: objdump, not enough memory for the allocation > [ 6631.584469] __vm_enough_memory: pid: 5321, comm: objdump, not enough memory for the allocation > Yeah this issue existed before this patch was applied on arm64, apparently an ancient objdump bug according to the other thread [0]. I confirmed it exists on v6.0 kernel for instance. [0]:https://lore.kernel.org/all/7b94619ad89c9e308c7aedef2cacfa10b8666e69.camel@gmx.de/
On Tue, Aug 01, 2023 at 11:05:40AM +0200, David Hildenbrand wrote: > On 31.07.23 23:50, Lorenzo Stoakes wrote: > > Some architectures do not populate the entire range categorised by > > KCORE_TEXT, so we must ensure that the kernel address we read from is > > valid. > > > > Unfortunately there is no solution currently available to do so with a > > purely iterator solution so reinstate the bounce buffer in this instance so > > we can use copy_from_kernel_nofault() in order to avoid page faults when > > regions are unmapped. > > > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > > the code to continue to use an iterator. > > > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > > Reported-by: Jiri Olsa <olsajiri@gmail.com> > > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > > Cc: stable@vger.kernel.org > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > > --- > > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > > 1 file changed, 25 insertions(+), 1 deletion(-) > > > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > > index 9cb32e1a78a0..3bc689038232 100644 > > --- a/fs/proc/kcore.c > > +++ b/fs/proc/kcore.c > > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > { > > + struct file *file = iocb->ki_filp; > > + char *buf = file->private_data; > > loff_t *fpos = &iocb->ki_pos; > > size_t phdrs_offset, notes_offset, data_offset; > > size_t page_offline_frozen = 1; > > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > fallthrough; > > case KCORE_VMEMMAP: > > case KCORE_TEXT: > > + /* > > + * Sadly we must use a bounce buffer here to be able to > > + * make use of copy_from_kernel_nofault(), as these > > + * memory regions might not always be mapped on all > > + * architectures. > > + */ > > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > > + if (iov_iter_zero(tsz, iter) != tsz) { > > + ret = -EFAULT; > > + goto out; > > + } > > /* > > * We use _copy_to_iter() to bypass usermode hardening > > * which would otherwise prevent this operation. > > */ > > Having a comment at this indentation level looks for the else case looks > kind of weird. Yeah, but having it indented again would be weird and seem like it doesn't apply to the block below, there's really no good spot for it and checkpatch.pl doesn't mind so I think this is ok :) > > (does that comment still apply?) Hm good point, actually, now we're using the bounce buffer we don't need to avoid usermode hardening any more. However since we've established a bounce buffer ourselves its still appropriate to use _copy_to_iter() as we know the source region is good to copy from. To make life easy I'll just respin with an updated comment :) > > > -- > Cheers, > > David / dhildenb >
On 01.08.23 18:33, Lorenzo Stoakes wrote: > On Tue, Aug 01, 2023 at 11:05:40AM +0200, David Hildenbrand wrote: >> On 31.07.23 23:50, Lorenzo Stoakes wrote: >>> Some architectures do not populate the entire range categorised by >>> KCORE_TEXT, so we must ensure that the kernel address we read from is >>> valid. >>> >>> Unfortunately there is no solution currently available to do so with a >>> purely iterator solution so reinstate the bounce buffer in this instance so >>> we can use copy_from_kernel_nofault() in order to avoid page faults when >>> regions are unmapped. >>> >>> This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid >>> bounce buffer for ktext data"), reinstating the bounce buffer, but adapts >>> the code to continue to use an iterator. >>> >>> Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") >>> Reported-by: Jiri Olsa <olsajiri@gmail.com> >>> Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava >>> Cc: stable@vger.kernel.org >>> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> >>> --- >>> fs/proc/kcore.c | 26 +++++++++++++++++++++++++- >>> 1 file changed, 25 insertions(+), 1 deletion(-) >>> >>> diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c >>> index 9cb32e1a78a0..3bc689038232 100644 >>> --- a/fs/proc/kcore.c >>> +++ b/fs/proc/kcore.c >>> @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, >>> static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) >>> { >>> + struct file *file = iocb->ki_filp; >>> + char *buf = file->private_data; >>> loff_t *fpos = &iocb->ki_pos; >>> size_t phdrs_offset, notes_offset, data_offset; >>> size_t page_offline_frozen = 1; >>> @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) >>> fallthrough; >>> case KCORE_VMEMMAP: >>> case KCORE_TEXT: >>> + /* >>> + * Sadly we must use a bounce buffer here to be able to >>> + * make use of copy_from_kernel_nofault(), as these >>> + * memory regions might not always be mapped on all >>> + * architectures. >>> + */ >>> + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { >>> + if (iov_iter_zero(tsz, iter) != tsz) { >>> + ret = -EFAULT; >>> + goto out; >>> + } >>> /* >>> * We use _copy_to_iter() to bypass usermode hardening >>> * which would otherwise prevent this operation. >>> */ >> >> Having a comment at this indentation level looks for the else case looks >> kind of weird. > > Yeah, but having it indented again would be weird and seem like it doesn't > apply to the block below, there's really no good spot for it and > checkpatch.pl doesn't mind so I think this is ok :) > >> >> (does that comment still apply?) > > Hm good point, actually, now we're using the bounce buffer we don't need to > avoid usermode hardening any more. > > However since we've established a bounce buffer ourselves its still > appropriate to use _copy_to_iter() as we know the source region is good to > copy from. > > To make life easy I'll just respin with an updated comment :) I'm not too picky this time, no need to resend if everybody else is fine :P
On Tue, Aug 01, 2023 at 06:34:26PM +0200, David Hildenbrand wrote: > On 01.08.23 18:33, Lorenzo Stoakes wrote: > > On Tue, Aug 01, 2023 at 11:05:40AM +0200, David Hildenbrand wrote: > > > On 31.07.23 23:50, Lorenzo Stoakes wrote: > > > > Some architectures do not populate the entire range categorised by > > > > KCORE_TEXT, so we must ensure that the kernel address we read from is > > > > valid. > > > > > > > > Unfortunately there is no solution currently available to do so with a > > > > purely iterator solution so reinstate the bounce buffer in this instance so > > > > we can use copy_from_kernel_nofault() in order to avoid page faults when > > > > regions are unmapped. > > > > > > > > This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid > > > > bounce buffer for ktext data"), reinstating the bounce buffer, but adapts > > > > the code to continue to use an iterator. > > > > > > > > Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") > > > > Reported-by: Jiri Olsa <olsajiri@gmail.com> > > > > Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava > > > > Cc: stable@vger.kernel.org > > > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > > > > --- > > > > fs/proc/kcore.c | 26 +++++++++++++++++++++++++- > > > > 1 file changed, 25 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > > > > index 9cb32e1a78a0..3bc689038232 100644 > > > > --- a/fs/proc/kcore.c > > > > +++ b/fs/proc/kcore.c > > > > @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, > > > > static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > > > { > > > > + struct file *file = iocb->ki_filp; > > > > + char *buf = file->private_data; > > > > loff_t *fpos = &iocb->ki_pos; > > > > size_t phdrs_offset, notes_offset, data_offset; > > > > size_t page_offline_frozen = 1; > > > > @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > > > > fallthrough; > > > > case KCORE_VMEMMAP: > > > > case KCORE_TEXT: > > > > + /* > > > > + * Sadly we must use a bounce buffer here to be able to > > > > + * make use of copy_from_kernel_nofault(), as these > > > > + * memory regions might not always be mapped on all > > > > + * architectures. > > > > + */ > > > > + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { > > > > + if (iov_iter_zero(tsz, iter) != tsz) { > > > > + ret = -EFAULT; > > > > + goto out; > > > > + } > > > > /* > > > > * We use _copy_to_iter() to bypass usermode hardening > > > > * which would otherwise prevent this operation. > > > > */ > > > > > > Having a comment at this indentation level looks for the else case looks > > > kind of weird. > > > > Yeah, but having it indented again would be weird and seem like it doesn't > > apply to the block below, there's really no good spot for it and > > checkpatch.pl doesn't mind so I think this is ok :) > > > > > > > > (does that comment still apply?) > > > > Hm good point, actually, now we're using the bounce buffer we don't need to > > avoid usermode hardening any more. > > > > However since we've established a bounce buffer ourselves its still > > appropriate to use _copy_to_iter() as we know the source region is good to > > copy from. > > > > To make life easy I'll just respin with an updated comment :) > > I'm not too picky this time, no need to resend if everybody else is fine :P > Haha you know the classic Lorenzo respin spiral and want to avoid it I see ;) The comment is actually inaccurate now, so to avoid noise + make life easy (maybe) for Andrew here's a fix patch that just corrects the comment:- ----8<---- From d2b8fb271f21b79048e5630699133f77a93d0481 Mon Sep 17 00:00:00 2001 From: Lorenzo Stoakes <lstoakes@gmail.com> Date: Tue, 1 Aug 2023 17:36:08 +0100 Subject: [PATCH] fs/proc/kcore: correct comment Correct comment to be strictly correct about reasoning. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> --- fs/proc/kcore.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c index 3bc689038232..23fc24d16b31 100644 --- a/fs/proc/kcore.c +++ b/fs/proc/kcore.c @@ -568,8 +568,8 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) goto out; } /* - * We use _copy_to_iter() to bypass usermode hardening - * which would otherwise prevent this operation. + * We know the bounce buffer is safe to copy from, so + * use _copy_to_iter() directly. */ } else if (_copy_to_iter(buf, tsz, iter) != tsz) { ret = -EFAULT; -- 2.41.0
>>> Hm good point, actually, now we're using the bounce buffer we don't need to >>> avoid usermode hardening any more. >>> >>> However since we've established a bounce buffer ourselves its still >>> appropriate to use _copy_to_iter() as we know the source region is good to >>> copy from. >>> >>> To make life easy I'll just respin with an updated comment :) >> >> I'm not too picky this time, no need to resend if everybody else is fine :P >> > > Haha you know the classic Lorenzo respin spiral and want to avoid it I see ;) Don't want to make your apparently stressful week more stressful. Not this time ;) > > The comment is actually inaccurate now, so to avoid noise + make life easy > (maybe) for Andrew here's a fix patch that just corrects the comment:- > > ----8<---- > > From d2b8fb271f21b79048e5630699133f77a93d0481 Mon Sep 17 00:00:00 2001 > From: Lorenzo Stoakes <lstoakes@gmail.com> > Date: Tue, 1 Aug 2023 17:36:08 +0100 > Subject: [PATCH] fs/proc/kcore: correct comment > > Correct comment to be strictly correct about reasoning. > > Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> > --- > fs/proc/kcore.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c > index 3bc689038232..23fc24d16b31 100644 > --- a/fs/proc/kcore.c > +++ b/fs/proc/kcore.c > @@ -568,8 +568,8 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) > goto out; > } > /* > - * We use _copy_to_iter() to bypass usermode hardening > - * which would otherwise prevent this operation. > + * We know the bounce buffer is safe to copy from, so > + * use _copy_to_iter() directly. > */ > } else if (_copy_to_iter(buf, tsz, iter) != tsz) { > ret = -EFAULT; > -- > 2.41.0 > Thanks! Acked-by: David Hildenbrand <david@redhat.com>
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c index 9cb32e1a78a0..3bc689038232 100644 --- a/fs/proc/kcore.c +++ b/fs/proc/kcore.c @@ -309,6 +309,8 @@ static void append_kcore_note(char *notes, size_t *i, const char *name, static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) { + struct file *file = iocb->ki_filp; + char *buf = file->private_data; loff_t *fpos = &iocb->ki_pos; size_t phdrs_offset, notes_offset, data_offset; size_t page_offline_frozen = 1; @@ -554,11 +556,22 @@ static ssize_t read_kcore_iter(struct kiocb *iocb, struct iov_iter *iter) fallthrough; case KCORE_VMEMMAP: case KCORE_TEXT: + /* + * Sadly we must use a bounce buffer here to be able to + * make use of copy_from_kernel_nofault(), as these + * memory regions might not always be mapped on all + * architectures. + */ + if (copy_from_kernel_nofault(buf, (void *)start, tsz)) { + if (iov_iter_zero(tsz, iter) != tsz) { + ret = -EFAULT; + goto out; + } /* * We use _copy_to_iter() to bypass usermode hardening * which would otherwise prevent this operation. */ - if (_copy_to_iter((char *)start, tsz, iter) != tsz) { + } else if (_copy_to_iter(buf, tsz, iter) != tsz) { ret = -EFAULT; goto out; } @@ -595,6 +608,10 @@ static int open_kcore(struct inode *inode, struct file *filp) if (ret) return ret; + filp->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!filp->private_data) + return -ENOMEM; + if (kcore_need_update) kcore_update_ram(); if (i_size_read(inode) != proc_root_kcore->size) { @@ -605,9 +622,16 @@ static int open_kcore(struct inode *inode, struct file *filp) return 0; } +static int release_kcore(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + static const struct proc_ops kcore_proc_ops = { .proc_read_iter = read_kcore_iter, .proc_open = open_kcore, + .proc_release = release_kcore, .proc_lseek = default_llseek, };
Some architectures do not populate the entire range categorised by KCORE_TEXT, so we must ensure that the kernel address we read from is valid. Unfortunately there is no solution currently available to do so with a purely iterator solution so reinstate the bounce buffer in this instance so we can use copy_from_kernel_nofault() in order to avoid page faults when regions are unmapped. This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data"), reinstating the bounce buffer, but adapts the code to continue to use an iterator. Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data") Reported-by: Jiri Olsa <olsajiri@gmail.com> Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> --- fs/proc/kcore.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)