| Message ID | 20240216010803.164750-1-mcgrof@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,fstests] check: add support for --start-after | expand |
On 2024-02-15 17:08:02, Luis Chamberlain wrote: > Often times one is running a new test baseline we want to continue to > start testing where we left off if the last test was a crash. To do > this the first thing that occurred to me was to use the check.time > file as an expunge file but that doesn't work so well if you crashed > as the file turns out empty. > > So instead add super simple argument --start-after which let's you > skip all tests until the test infrastructure has "seen" the test > you want to skip. This does obviously work best if you are not using > a random order, but that is rather implied. If you do use a random > order --start-after still works, the final output will however just > be randomized of course, but it should let you skip a failed known > crash at least. The real value to --start-after though is for when > you use a non-randomized order. > > If the target test is not found in your test list we complain and > bail. This is not as obvious when you specify groups, so likewise > we do a special check when you use groups to ensure the test is at > least part of one group. > > Demo: > > root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/025 > Start after test generic/025 not found in any group specified. > Be sure you specify a test present in one of your test run groups if using --start-after. > > Your set of groups have these tests: > > generic/476 generic/521 generic/522 generic/616 generic/617 generic/642 generic/650 > > root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/522 > SECTION -- xfs_reflink > RECREATING -- xfs on /dev/loop16 > FSTYP -- xfs (non-debug) > PLATFORM -- Linux/x86_64 demo-xfs-reflink 6.5.0-5-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.5.13-1 (2023-11-29) > MKFS_OPTIONS -- -f -f -m reflink=1,rmapbt=1, -i sparse=1, /dev/loop5 > MOUNT_OPTIONS -- /dev/loop5 /media/scratch > > generic/616 > generic/617 > generic/642 > generic/650 > > Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> > --- > > Changes since v1: > > This all addresses Anand Jain's feedback. > > - Skip tests completely which are not going to be run > - Sanity test to ensure the test is part of a group, if you listed > groups, and if not provide a useful output giving the list of all > tests in your group so you can know better which one is a valid test > to skip > - Sanity test to ensure the test you specified is valid > - Moves the trim during file processing now using a routine > trim_start_after() > > check | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/check b/check > index 71b9fbd07522..1c76f33192ba 100755 > --- a/check > +++ b/check > @@ -18,6 +18,8 @@ showme=false > have_test_arg=false > randomize=false > exact_order=false > +start_after=false > +start_after_test="" > export here=`pwd` > xfile="" > subdir_xfile="" > @@ -80,6 +82,7 @@ check options > -b brief test summary > -R fmt[,fmt] generate report in formats specified. Supported formats: xunit, xunit-quiet > --large-fs optimise scratch device for large filesystems > + --start-after only start testing after the test specified > -s section run only specified section from config file > -S section exclude the specified section from the config file > -L <n> loop tests <n> times following a failure, measuring aggregate pass/fail metrics > @@ -120,6 +123,8 @@ examples: > check -x stress xfs/* > check -X .exclude -g auto > check -E ~/.xfstests.exclude > + check --start-after btrfs/010 > + check -n -g soak --start-after generic/522 > ' > exit 1 > } > @@ -204,6 +209,24 @@ trim_test_list() > rm -f $tmp.grep > } > > +# takes the list of tests to run in $tmp.list and skips all tests until > +# the specified test is found. This will ensure the tests start after the > +# test specified, it skips the test specified. > +trim_start_after() > +{ > + local skip_test="$1" > + local starts_regexp=$(echo $skip_test | sed -e 's|\/|\\/|') > + local grep_start_after=" | awk 'f;/.*'$starts_regexp'/{f=1}'" Looks like grep_start_after is not used Otherwise, LGTM: Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
On Fri, Feb 16, 2024 at 10:03:31AM +0100, Andrey Albershteyn wrote: > On 2024-02-15 17:08:02, Luis Chamberlain wrote: > > Often times one is running a new test baseline we want to continue to > > start testing where we left off if the last test was a crash. To do > > this the first thing that occurred to me was to use the check.time > > file as an expunge file but that doesn't work so well if you crashed > > as the file turns out empty. > > > > So instead add super simple argument --start-after which let's you > > skip all tests until the test infrastructure has "seen" the test > > you want to skip. This does obviously work best if you are not using > > a random order, but that is rather implied. If you do use a random > > order --start-after still works, the final output will however just > > be randomized of course, but it should let you skip a failed known > > crash at least. The real value to --start-after though is for when > > you use a non-randomized order. > > > > If the target test is not found in your test list we complain and > > bail. This is not as obvious when you specify groups, so likewise > > we do a special check when you use groups to ensure the test is at > > least part of one group. > > > > Demo: > > > > root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/025 > > Start after test generic/025 not found in any group specified. > > Be sure you specify a test present in one of your test run groups if using --start-after. > > > > Your set of groups have these tests: > > > > generic/476 generic/521 generic/522 generic/616 generic/617 generic/642 generic/650 > > > > root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/522 > > SECTION -- xfs_reflink > > RECREATING -- xfs on /dev/loop16 > > FSTYP -- xfs (non-debug) > > PLATFORM -- Linux/x86_64 demo-xfs-reflink 6.5.0-5-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.5.13-1 (2023-11-29) > > MKFS_OPTIONS -- -f -f -m reflink=1,rmapbt=1, -i sparse=1, /dev/loop5 > > MOUNT_OPTIONS -- /dev/loop5 /media/scratch > > > > generic/616 > > generic/617 > > generic/642 > > generic/650 > > > > Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> > > --- > > > > Changes since v1: > > > > This all addresses Anand Jain's feedback. > > > > - Skip tests completely which are not going to be run > > - Sanity test to ensure the test is part of a group, if you listed > > groups, and if not provide a useful output giving the list of all > > tests in your group so you can know better which one is a valid test > > to skip > > - Sanity test to ensure the test you specified is valid > > - Moves the trim during file processing now using a routine > > trim_start_after() > > > > check | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/check b/check > > index 71b9fbd07522..1c76f33192ba 100755 > > --- a/check > > +++ b/check > > @@ -18,6 +18,8 @@ showme=false > > have_test_arg=false > > randomize=false > > exact_order=false > > +start_after=false > > +start_after_test="" > > export here=`pwd` > > xfile="" > > subdir_xfile="" > > @@ -80,6 +82,7 @@ check options > > -b brief test summary > > -R fmt[,fmt] generate report in formats specified. Supported formats: xunit, xunit-quiet > > --large-fs optimise scratch device for large filesystems > > + --start-after only start testing after the test specified > > -s section run only specified section from config file > > -S section exclude the specified section from the config file > > -L <n> loop tests <n> times following a failure, measuring aggregate pass/fail metrics > > @@ -120,6 +123,8 @@ examples: > > check -x stress xfs/* > > check -X .exclude -g auto > > check -E ~/.xfstests.exclude > > + check --start-after btrfs/010 > > + check -n -g soak --start-after generic/522 > > ' > > exit 1 > > } > > @@ -204,6 +209,24 @@ trim_test_list() > > rm -f $tmp.grep > > } > > > > +# takes the list of tests to run in $tmp.list and skips all tests until > > +# the specified test is found. This will ensure the tests start after the > > +# test specified, it skips the test specified. > > +trim_start_after() > > +{ > > + local skip_test="$1" > > + local starts_regexp=$(echo $skip_test | sed -e 's|\/|\\/|') > > + local grep_start_after=" | awk 'f;/.*'$starts_regexp'/{f=1}'" > > Looks like grep_start_after is not used > Otherwise, LGTM: > Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com> Thanks I've made these changes, will send a v3: diff --git a/check b/check index 1c76f33192ba..d0bf7ea43870 100755 --- a/check +++ b/check @@ -18,7 +18,6 @@ showme=false have_test_arg=false randomize=false exact_order=false -start_after=false start_after_test="" export here=`pwd` xfile="" @@ -216,7 +215,6 @@ trim_start_after() { local skip_test="$1" local starts_regexp=$(echo $skip_test | sed -e 's|\/|\\/|') - local grep_start_after=" | awk 'f;/.*'$starts_regexp'/{f=1}'" if grep -q $skip_test $tmp.list ; then rm -f $tmp.grep @@ -266,7 +264,7 @@ _prepare_test_list() exit 1 fi - if [[ $start_after && $start_after_found -ne 1 ]]; then + if [[ "$start_after_test" != "" && $start_after_found -ne 1 ]]; then echo $list | grep -q $start_after_test if [[ $? -eq 0 ]]; then start_after_found=1 @@ -278,7 +276,7 @@ _prepare_test_list() done group_all="$group_all $list" done - if [[ $start_after && $start_after_found -ne 1 ]]; then + if [[ "$start_after_test" != "" && $start_after_found -ne 1 ]]; then group_all=$(echo $group_all | sed -e 's|tests/||g') echo "Start after test $start_after_test not found in any group specified." echo "Be sure you specify a test present in one of your test run groups if using --start-after." @@ -301,7 +299,7 @@ _prepare_test_list() trim_test_list $list done - if [[ $start_after ]]; then + if [[ "$start_after_test" != "" ]]; then trim_start_after $start_after_test fi @@ -361,7 +359,10 @@ while [ $# -gt 0 ]; do fi ;; --start-after) - start_after=true + if $randomize; then + echo "Cannot specify -r and --start-after." + exit 1 + fi start_after_test="$2" shift ;;
diff --git a/check b/check index 71b9fbd07522..1c76f33192ba 100755 --- a/check +++ b/check @@ -18,6 +18,8 @@ showme=false have_test_arg=false randomize=false exact_order=false +start_after=false +start_after_test="" export here=`pwd` xfile="" subdir_xfile="" @@ -80,6 +82,7 @@ check options -b brief test summary -R fmt[,fmt] generate report in formats specified. Supported formats: xunit, xunit-quiet --large-fs optimise scratch device for large filesystems + --start-after only start testing after the test specified -s section run only specified section from config file -S section exclude the specified section from the config file -L <n> loop tests <n> times following a failure, measuring aggregate pass/fail metrics @@ -120,6 +123,8 @@ examples: check -x stress xfs/* check -X .exclude -g auto check -E ~/.xfstests.exclude + check --start-after btrfs/010 + check -n -g soak --start-after generic/522 ' exit 1 } @@ -204,6 +209,24 @@ trim_test_list() rm -f $tmp.grep } +# takes the list of tests to run in $tmp.list and skips all tests until +# the specified test is found. This will ensure the tests start after the +# test specified, it skips the test specified. +trim_start_after() +{ + local skip_test="$1" + local starts_regexp=$(echo $skip_test | sed -e 's|\/|\\/|') + local grep_start_after=" | awk 'f;/.*'$starts_regexp'/{f=1}'" + + if grep -q $skip_test $tmp.list ; then + rm -f $tmp.grep + awk 'f;/.*'$starts_regexp'/{f=1}' $tmp.list > $tmp.tmp + mv $tmp.tmp $tmp.list + else + echo "Test $skip_test not found in test list, be sure to use a valid test if using --start-after" + exit 1 + fi +} _wallclock() { @@ -233,6 +256,9 @@ _prepare_test_list() # no test numbers, do everything get_all_tests else + local group_all + local start_after_found=0 + list="" for group in $GROUP_LIST; do list=$(get_group_list $group) if [ -z "$list" ]; then @@ -240,11 +266,28 @@ _prepare_test_list() exit 1 fi + if [[ $start_after && $start_after_found -ne 1 ]]; then + echo $list | grep -q $start_after_test + if [[ $? -eq 0 ]]; then + start_after_found=1 + fi + fi for t in $list; do grep -s "^$t\$" $tmp.list >/dev/null || \ echo "$t" >>$tmp.list done + group_all="$group_all $list" done + if [[ $start_after && $start_after_found -ne 1 ]]; then + group_all=$(echo $group_all | sed -e 's|tests/||g') + echo "Start after test $start_after_test not found in any group specified." + echo "Be sure you specify a test present in one of your test run groups if using --start-after." + echo + echo "Your set of groups have these tests:" + echo + echo -e $group_all + exit 1 + fi fi # Specified groups to exclude @@ -258,6 +301,10 @@ _prepare_test_list() trim_test_list $list done + if [[ $start_after ]]; then + trim_start_after $start_after_test + fi + # sort the list of tests into numeric order unless we're running tests # in the exact order specified if ! $exact_order; then @@ -313,6 +360,11 @@ while [ $# -gt 0 ]; do <(sed "s/#.*$//" $xfile) fi ;; + --start-after) + start_after=true + start_after_test="$2" + shift + ;; -s) RUN_SECTION="$RUN_SECTION $2"; shift ;; -S) EXCLUDE_SECTION="$EXCLUDE_SECTION $2"; shift ;; -l) diff="diff" ;;
Often times one is running a new test baseline we want to continue to start testing where we left off if the last test was a crash. To do this the first thing that occurred to me was to use the check.time file as an expunge file but that doesn't work so well if you crashed as the file turns out empty. So instead add super simple argument --start-after which let's you skip all tests until the test infrastructure has "seen" the test you want to skip. This does obviously work best if you are not using a random order, but that is rather implied. If you do use a random order --start-after still works, the final output will however just be randomized of course, but it should let you skip a failed known crash at least. The real value to --start-after though is for when you use a non-randomized order. If the target test is not found in your test list we complain and bail. This is not as obvious when you specify groups, so likewise we do a special check when you use groups to ensure the test is at least part of one group. Demo: root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/025 Start after test generic/025 not found in any group specified. Be sure you specify a test present in one of your test run groups if using --start-after. Your set of groups have these tests: generic/476 generic/521 generic/522 generic/616 generic/617 generic/642 generic/650 root@demo-xfs-reflink /var/lib/xfstests # ./check -s xfs_reflink -n -g soak --start-after generic/522 SECTION -- xfs_reflink RECREATING -- xfs on /dev/loop16 FSTYP -- xfs (non-debug) PLATFORM -- Linux/x86_64 demo-xfs-reflink 6.5.0-5-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.5.13-1 (2023-11-29) MKFS_OPTIONS -- -f -f -m reflink=1,rmapbt=1, -i sparse=1, /dev/loop5 MOUNT_OPTIONS -- /dev/loop5 /media/scratch generic/616 generic/617 generic/642 generic/650 Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> --- Changes since v1: This all addresses Anand Jain's feedback. - Skip tests completely which are not going to be run - Sanity test to ensure the test is part of a group, if you listed groups, and if not provide a useful output giving the list of all tests in your group so you can know better which one is a valid test to skip - Sanity test to ensure the test you specified is valid - Moves the trim during file processing now using a routine trim_start_after() check | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)