@@ -13,7 +13,9 @@ obj-$(CONFIG_ZINC_CHACHA20) += zinc_chacha20.o
zinc_poly1305-y := poly1305/poly1305.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_X86_64) += poly1305/poly1305-x86_64.o
-perlasm-targets += poly1305/poly1305-x86_64.S
+zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM) += poly1305/poly1305-arm.o
+zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM64) += poly1305/poly1305-arm64.o
+perlasm-targets += poly1305/poly1305-x86_64.S poly1305/poly1305-arm.S poly1305/poly1305-arm64.S
obj-$(CONFIG_ZINC_POLY1305) += zinc_poly1305.o
quiet_cmd_perlasm = PERLASM $@
new file mode 100644
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+
+asmlinkage void poly1305_init_arm(void *ctx, const u8 key[16]);
+asmlinkage void poly1305_blocks_arm(void *ctx, const u8 *inp, const size_t len,
+ const u32 padbit);
+asmlinkage void poly1305_emit_arm(void *ctx, u8 mac[16], const u32 nonce[4]);
+asmlinkage void poly1305_blocks_neon(void *ctx, const u8 *inp, const size_t len,
+ const u32 padbit);
+asmlinkage void poly1305_emit_neon(void *ctx, u8 mac[16], const u32 nonce[4]);
+
+static bool poly1305_use_neon __ro_after_init;
+static bool *const poly1305_nobs[] __initconst = { &poly1305_use_neon };
+
+static void __init poly1305_fpu_init(void)
+{
+#if defined(CONFIG_ZINC_ARCH_ARM64)
+ poly1305_use_neon = elf_hwcap & HWCAP_ASIMD;
+#elif defined(CONFIG_ZINC_ARCH_ARM)
+ poly1305_use_neon = elf_hwcap & HWCAP_NEON;
+#endif
+}
+
+#if defined(CONFIG_ZINC_ARCH_ARM64)
+struct poly1305_arch_internal {
+ union {
+ u32 h[5];
+ struct {
+ u64 h0, h1, h2;
+ };
+ };
+ u64 is_base2_26;
+ u64 r[2];
+};
+#elif defined(CONFIG_ZINC_ARCH_ARM)
+struct poly1305_arch_internal {
+ union {
+ u32 h[5];
+ struct {
+ u64 h0, h1;
+ u32 h2;
+ } __packed;
+ };
+ u32 r[4];
+ u32 is_base2_26;
+};
+#endif
+
+/* The NEON code uses base 2^26, while the scalar code uses base 2^64 on 64-bit
+ * and base 2^32 on 32-bit. If we hit the unfortunate situation of using NEON
+ * and then having to go back to scalar -- because the user is silly and has
+ * called the update function from two separate contexts -- then we need to
+ * convert back to the original base before proceeding. The below function is
+ * written for 64-bit integers, and so we have to swap words at the end on
+ * big-endian 32-bit. It is possible to reason that the initial reduction below
+ * is sufficient given the implementation invariants. However, for an avoidance
+ * of doubt and because this is not performance critical, we do the full
+ * reduction anyway.
+ */
+static void convert_to_base2_64(void *ctx)
+{
+ struct poly1305_arch_internal *state = ctx;
+ u32 cy;
+
+ if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !state->is_base2_26)
+ return;
+
+ cy = state->h[0] >> 26; state->h[0] &= 0x3ffffff; state->h[1] += cy;
+ cy = state->h[1] >> 26; state->h[1] &= 0x3ffffff; state->h[2] += cy;
+ cy = state->h[2] >> 26; state->h[2] &= 0x3ffffff; state->h[3] += cy;
+ cy = state->h[3] >> 26; state->h[3] &= 0x3ffffff; state->h[4] += cy;
+ state->h0 = ((u64)state->h[2] << 52) | ((u64)state->h[1] << 26) | state->h[0];
+ state->h1 = ((u64)state->h[4] << 40) | ((u64)state->h[3] << 14) | (state->h[2] >> 12);
+ state->h2 = state->h[4] >> 24;
+ if (IS_ENABLED(CONFIG_ZINC_ARCH_ARM) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) {
+ state->h0 = rol64(state->h0, 32);
+ state->h1 = rol64(state->h1, 32);
+ }
+#define ULT(a, b) ((a ^ ((a ^ b) | ((a - b) ^ b))) >> (sizeof(a) * 8 - 1))
+ cy = (state->h2 >> 2) + (state->h2 & ~3ULL);
+ state->h2 &= 3;
+ state->h0 += cy;
+ state->h1 += (cy = ULT(state->h0, cy));
+ state->h2 += ULT(state->h1, cy);
+#undef ULT
+ state->is_base2_26 = 0;
+}
+
+static inline bool poly1305_init_arch(void *ctx,
+ const u8 key[POLY1305_KEY_SIZE])
+{
+ poly1305_init_arm(ctx, key);
+ return true;
+}
+
+static inline bool poly1305_blocks_arch(void *ctx, const u8 *inp,
+ size_t len, const u32 padbit,
+ simd_context_t *simd_context)
+{
+ /* SIMD disables preemption, so relax after processing each page. */
+ BUILD_BUG_ON(PAGE_SIZE < POLY1305_BLOCK_SIZE ||
+ PAGE_SIZE % POLY1305_BLOCK_SIZE);
+
+ if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !poly1305_use_neon ||
+ !simd_use(simd_context)) {
+ convert_to_base2_64(ctx);
+ poly1305_blocks_arm(ctx, inp, len, padbit);
+ return true;
+ }
+
+ for (;;) {
+ const size_t bytes = min_t(size_t, len, PAGE_SIZE);
+
+ poly1305_blocks_neon(ctx, inp, bytes, padbit);
+ len -= bytes;
+ if (!len)
+ break;
+ inp += bytes;
+ simd_relax(simd_context);
+ }
+ return true;
+}
+
+static inline bool poly1305_emit_arch(void *ctx, u8 mac[POLY1305_MAC_SIZE],
+ const u32 nonce[4],
+ simd_context_t *simd_context)
+{
+ if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !poly1305_use_neon ||
+ !simd_use(simd_context)) {
+ convert_to_base2_64(ctx);
+ poly1305_emit_arm(ctx, mac, nonce);
+ } else
+ poly1305_emit_neon(ctx, mac, nonce);
+ return true;
+}
new file mode 100644
@@ -0,0 +1,1276 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# IALU(*)/gcc-4.4 NEON
+#
+# ARM11xx(ARMv6) 7.78/+100% -
+# Cortex-A5 6.35/+130% 3.00
+# Cortex-A8 6.25/+115% 2.36
+# Cortex-A9 5.10/+95% 2.55
+# Cortex-A15 3.85/+85% 1.25(**)
+# Snapdragon S4 5.70/+100% 1.48(**)
+#
+# (*) this is for -march=armv6, i.e. with bunch of ldrb loading data;
+# (**) these are trade-off results, they can be improved by ~8% but at
+# the cost of 15/12% regression on Cortex-A5/A7, it's even possible
+# to improve Cortex-A9 result, but then A5/A7 loose more than 20%;
+
+$flavour = shift;
+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+
+if ($flavour && $flavour ne "void") {
+ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+ ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+ ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+ die "can't locate arm-xlate.pl";
+
+ open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+ open STDOUT,">$output";
+}
+
+($ctx,$inp,$len,$padbit)=map("r$_",(0..3));
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+#else
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
+# define poly1305_init poly1305_init_arm
+# define poly1305_blocks poly1305_blocks_arm
+# define poly1305_emit poly1305_emit_arm
+#endif
+
+.text
+#if defined(__thumb2__)
+.syntax unified
+.thumb
+#else
+.code 32
+#endif
+
+.globl poly1305_emit
+.globl poly1305_blocks
+.globl poly1305_init
+.type poly1305_init,%function
+.align 5
+poly1305_init:
+.Lpoly1305_init:
+ stmdb sp!,{r4-r11}
+
+ eor r3,r3,r3
+ cmp $inp,#0
+ str r3,[$ctx,#0] @ zero hash value
+ str r3,[$ctx,#4]
+ str r3,[$ctx,#8]
+ str r3,[$ctx,#12]
+ str r3,[$ctx,#16]
+ str r3,[$ctx,#36] @ is_base2_26
+ add $ctx,$ctx,#20
+
+#ifdef __thumb2__
+ it eq
+#endif
+ moveq r0,#0
+ beq .Lno_key
+
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+ adr r11,.Lpoly1305_init
+ ldr r12,.LOPENSSL_armcap
+#endif
+ ldrb r4,[$inp,#0]
+ mov r10,#0x0fffffff
+ ldrb r5,[$inp,#1]
+ and r3,r10,#-4 @ 0x0ffffffc
+ ldrb r6,[$inp,#2]
+ ldrb r7,[$inp,#3]
+ orr r4,r4,r5,lsl#8
+ ldrb r5,[$inp,#4]
+ orr r4,r4,r6,lsl#16
+ ldrb r6,[$inp,#5]
+ orr r4,r4,r7,lsl#24
+ ldrb r7,[$inp,#6]
+ and r4,r4,r10
+
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+ ldr r12,[r11,r12] @ OPENSSL_armcap_P
+# ifdef __APPLE__
+ ldr r12,[r12]
+# endif
+#endif
+ ldrb r8,[$inp,#7]
+ orr r5,r5,r6,lsl#8
+ ldrb r6,[$inp,#8]
+ orr r5,r5,r7,lsl#16
+ ldrb r7,[$inp,#9]
+ orr r5,r5,r8,lsl#24
+ ldrb r8,[$inp,#10]
+ and r5,r5,r3
+
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+ tst r12,#ARMV7_NEON @ check for NEON
+# ifdef __APPLE__
+ adr r9,poly1305_blocks_neon
+ adr r11,poly1305_blocks
+# ifdef __thumb2__
+ it ne
+# endif
+ movne r11,r9
+ adr r12,poly1305_emit
+ adr r10,poly1305_emit_neon
+# ifdef __thumb2__
+ it ne
+# endif
+ movne r12,r10
+# else
+# ifdef __thumb2__
+ itete eq
+# endif
+ addeq r12,r11,#(poly1305_emit-.Lpoly1305_init)
+ addne r12,r11,#(poly1305_emit_neon-.Lpoly1305_init)
+ addeq r11,r11,#(poly1305_blocks-.Lpoly1305_init)
+ addne r11,r11,#(poly1305_blocks_neon-.Lpoly1305_init)
+# endif
+# ifdef __thumb2__
+ orr r12,r12,#1 @ thumb-ify address
+ orr r11,r11,#1
+# endif
+#endif
+ ldrb r9,[$inp,#11]
+ orr r6,r6,r7,lsl#8
+ ldrb r7,[$inp,#12]
+ orr r6,r6,r8,lsl#16
+ ldrb r8,[$inp,#13]
+ orr r6,r6,r9,lsl#24
+ ldrb r9,[$inp,#14]
+ and r6,r6,r3
+
+ ldrb r10,[$inp,#15]
+ orr r7,r7,r8,lsl#8
+ str r4,[$ctx,#0]
+ orr r7,r7,r9,lsl#16
+ str r5,[$ctx,#4]
+ orr r7,r7,r10,lsl#24
+ str r6,[$ctx,#8]
+ and r7,r7,r3
+ str r7,[$ctx,#12]
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+ stmia r2,{r11,r12} @ fill functions table
+ mov r0,#1
+#else
+ mov r0,#0
+#endif
+.Lno_key:
+ ldmia sp!,{r4-r11}
+#if __ARM_ARCH__>=5
+ ret @ bx lr
+#else
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ bx lr @ interoperable with Thumb ISA:-)
+#endif
+.size poly1305_init,.-poly1305_init
+___
+{
+my ($h0,$h1,$h2,$h3,$h4,$r0,$r1,$r2,$r3)=map("r$_",(4..12));
+my ($s1,$s2,$s3)=($r1,$r2,$r3);
+
+$code.=<<___;
+.type poly1305_blocks,%function
+.align 5
+poly1305_blocks:
+.Lpoly1305_blocks:
+ stmdb sp!,{r3-r11,lr}
+
+ ands $len,$len,#-16
+ beq .Lno_data
+
+ cmp $padbit,#0
+ add $len,$len,$inp @ end pointer
+ sub sp,sp,#32
+
+ ldmia $ctx,{$h0-$r3} @ load context
+
+ str $ctx,[sp,#12] @ offload stuff
+ mov lr,$inp
+ str $len,[sp,#16]
+ str $r1,[sp,#20]
+ str $r2,[sp,#24]
+ str $r3,[sp,#28]
+ b .Loop
+
+.Loop:
+#if __ARM_ARCH__<7
+ ldrb r0,[lr],#16 @ load input
+# ifdef __thumb2__
+ it hi
+# endif
+ addhi $h4,$h4,#1 @ 1<<128
+ ldrb r1,[lr,#-15]
+ ldrb r2,[lr,#-14]
+ ldrb r3,[lr,#-13]
+ orr r1,r0,r1,lsl#8
+ ldrb r0,[lr,#-12]
+ orr r2,r1,r2,lsl#16
+ ldrb r1,[lr,#-11]
+ orr r3,r2,r3,lsl#24
+ ldrb r2,[lr,#-10]
+ adds $h0,$h0,r3 @ accumulate input
+
+ ldrb r3,[lr,#-9]
+ orr r1,r0,r1,lsl#8
+ ldrb r0,[lr,#-8]
+ orr r2,r1,r2,lsl#16
+ ldrb r1,[lr,#-7]
+ orr r3,r2,r3,lsl#24
+ ldrb r2,[lr,#-6]
+ adcs $h1,$h1,r3
+
+ ldrb r3,[lr,#-5]
+ orr r1,r0,r1,lsl#8
+ ldrb r0,[lr,#-4]
+ orr r2,r1,r2,lsl#16
+ ldrb r1,[lr,#-3]
+ orr r3,r2,r3,lsl#24
+ ldrb r2,[lr,#-2]
+ adcs $h2,$h2,r3
+
+ ldrb r3,[lr,#-1]
+ orr r1,r0,r1,lsl#8
+ str lr,[sp,#8] @ offload input pointer
+ orr r2,r1,r2,lsl#16
+ add $s1,$r1,$r1,lsr#2
+ orr r3,r2,r3,lsl#24
+#else
+ ldr r0,[lr],#16 @ load input
+# ifdef __thumb2__
+ it hi
+# endif
+ addhi $h4,$h4,#1 @ padbit
+ ldr r1,[lr,#-12]
+ ldr r2,[lr,#-8]
+ ldr r3,[lr,#-4]
+# ifdef __ARMEB__
+ rev r0,r0
+ rev r1,r1
+ rev r2,r2
+ rev r3,r3
+# endif
+ adds $h0,$h0,r0 @ accumulate input
+ str lr,[sp,#8] @ offload input pointer
+ adcs $h1,$h1,r1
+ add $s1,$r1,$r1,lsr#2
+ adcs $h2,$h2,r2
+#endif
+ add $s2,$r2,$r2,lsr#2
+ adcs $h3,$h3,r3
+ add $s3,$r3,$r3,lsr#2
+
+ umull r2,r3,$h1,$r0
+ adc $h4,$h4,#0
+ umull r0,r1,$h0,$r0
+ umlal r2,r3,$h4,$s1
+ umlal r0,r1,$h3,$s1
+ ldr $r1,[sp,#20] @ reload $r1
+ umlal r2,r3,$h2,$s3
+ umlal r0,r1,$h1,$s3
+ umlal r2,r3,$h3,$s2
+ umlal r0,r1,$h2,$s2
+ umlal r2,r3,$h0,$r1
+ str r0,[sp,#0] @ future $h0
+ mul r0,$s2,$h4
+ ldr $r2,[sp,#24] @ reload $r2
+ adds r2,r2,r1 @ d1+=d0>>32
+ eor r1,r1,r1
+ adc lr,r3,#0 @ future $h2
+ str r2,[sp,#4] @ future $h1
+
+ mul r2,$s3,$h4
+ eor r3,r3,r3
+ umlal r0,r1,$h3,$s3
+ ldr $r3,[sp,#28] @ reload $r3
+ umlal r2,r3,$h3,$r0
+ umlal r0,r1,$h2,$r0
+ umlal r2,r3,$h2,$r1
+ umlal r0,r1,$h1,$r1
+ umlal r2,r3,$h1,$r2
+ umlal r0,r1,$h0,$r2
+ umlal r2,r3,$h0,$r3
+ ldr $h0,[sp,#0]
+ mul $h4,$r0,$h4
+ ldr $h1,[sp,#4]
+
+ adds $h2,lr,r0 @ d2+=d1>>32
+ ldr lr,[sp,#8] @ reload input pointer
+ adc r1,r1,#0
+ adds $h3,r2,r1 @ d3+=d2>>32
+ ldr r0,[sp,#16] @ reload end pointer
+ adc r3,r3,#0
+ add $h4,$h4,r3 @ h4+=d3>>32
+
+ and r1,$h4,#-4
+ and $h4,$h4,#3
+ add r1,r1,r1,lsr#2 @ *=5
+ adds $h0,$h0,r1
+ adcs $h1,$h1,#0
+ adcs $h2,$h2,#0
+ adcs $h3,$h3,#0
+ adc $h4,$h4,#0
+
+ cmp r0,lr @ done yet?
+ bhi .Loop
+
+ ldr $ctx,[sp,#12]
+ add sp,sp,#32
+ stmia $ctx,{$h0-$h4} @ store the result
+
+.Lno_data:
+#if __ARM_ARCH__>=5
+ ldmia sp!,{r3-r11,pc}
+#else
+ ldmia sp!,{r3-r11,lr}
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ bx lr @ interoperable with Thumb ISA:-)
+#endif
+.size poly1305_blocks,.-poly1305_blocks
+___
+}
+{
+my ($ctx,$mac,$nonce)=map("r$_",(0..2));
+my ($h0,$h1,$h2,$h3,$h4,$g0,$g1,$g2,$g3)=map("r$_",(3..11));
+my $g4=$h4;
+
+$code.=<<___;
+.type poly1305_emit,%function
+.align 5
+poly1305_emit:
+ stmdb sp!,{r4-r11}
+.Lpoly1305_emit_enter:
+
+ ldmia $ctx,{$h0-$h4}
+ adds $g0,$h0,#5 @ compare to modulus
+ adcs $g1,$h1,#0
+ adcs $g2,$h2,#0
+ adcs $g3,$h3,#0
+ adc $g4,$h4,#0
+ tst $g4,#4 @ did it carry/borrow?
+
+#ifdef __thumb2__
+ it ne
+#endif
+ movne $h0,$g0
+ ldr $g0,[$nonce,#0]
+#ifdef __thumb2__
+ it ne
+#endif
+ movne $h1,$g1
+ ldr $g1,[$nonce,#4]
+#ifdef __thumb2__
+ it ne
+#endif
+ movne $h2,$g2
+ ldr $g2,[$nonce,#8]
+#ifdef __thumb2__
+ it ne
+#endif
+ movne $h3,$g3
+ ldr $g3,[$nonce,#12]
+
+ adds $h0,$h0,$g0
+ adcs $h1,$h1,$g1
+ adcs $h2,$h2,$g2
+ adc $h3,$h3,$g3
+
+#if __ARM_ARCH__>=7
+# ifdef __ARMEB__
+ rev $h0,$h0
+ rev $h1,$h1
+ rev $h2,$h2
+ rev $h3,$h3
+# endif
+ str $h0,[$mac,#0]
+ str $h1,[$mac,#4]
+ str $h2,[$mac,#8]
+ str $h3,[$mac,#12]
+#else
+ strb $h0,[$mac,#0]
+ mov $h0,$h0,lsr#8
+ strb $h1,[$mac,#4]
+ mov $h1,$h1,lsr#8
+ strb $h2,[$mac,#8]
+ mov $h2,$h2,lsr#8
+ strb $h3,[$mac,#12]
+ mov $h3,$h3,lsr#8
+
+ strb $h0,[$mac,#1]
+ mov $h0,$h0,lsr#8
+ strb $h1,[$mac,#5]
+ mov $h1,$h1,lsr#8
+ strb $h2,[$mac,#9]
+ mov $h2,$h2,lsr#8
+ strb $h3,[$mac,#13]
+ mov $h3,$h3,lsr#8
+
+ strb $h0,[$mac,#2]
+ mov $h0,$h0,lsr#8
+ strb $h1,[$mac,#6]
+ mov $h1,$h1,lsr#8
+ strb $h2,[$mac,#10]
+ mov $h2,$h2,lsr#8
+ strb $h3,[$mac,#14]
+ mov $h3,$h3,lsr#8
+
+ strb $h0,[$mac,#3]
+ strb $h1,[$mac,#7]
+ strb $h2,[$mac,#11]
+ strb $h3,[$mac,#15]
+#endif
+ ldmia sp!,{r4-r11}
+#if __ARM_ARCH__>=5
+ ret @ bx lr
+#else
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ bx lr @ interoperable with Thumb ISA:-)
+#endif
+.size poly1305_emit,.-poly1305_emit
+___
+{
+my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("d$_",(0..9));
+my ($D0,$D1,$D2,$D3,$D4, $H0,$H1,$H2,$H3,$H4) = map("q$_",(5..14));
+my ($T0,$T1,$MASK) = map("q$_",(15,4,0));
+
+my ($in2,$zeros,$tbl0,$tbl1) = map("r$_",(4..7));
+
+$code.=<<___;
+#if (defined(__KERNEL__) && defined(CONFIG_KERNEL_MODE_NEON)) || (!defined(__KERNEL__) && __ARM_MAX_ARCH__>=7)
+.fpu neon
+
+.type poly1305_init_neon,%function
+.align 5
+poly1305_init_neon:
+.Lpoly1305_init_neon:
+ ldr r4,[$ctx,#20] @ load key base 2^32
+ ldr r5,[$ctx,#24]
+ ldr r6,[$ctx,#28]
+ ldr r7,[$ctx,#32]
+
+ and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26
+ mov r3,r4,lsr#26
+ mov r4,r5,lsr#20
+ orr r3,r3,r5,lsl#6
+ mov r5,r6,lsr#14
+ orr r4,r4,r6,lsl#12
+ mov r6,r7,lsr#8
+ orr r5,r5,r7,lsl#18
+ and r3,r3,#0x03ffffff
+ and r4,r4,#0x03ffffff
+ and r5,r5,#0x03ffffff
+
+ vdup.32 $R0,r2 @ r^1 in both lanes
+ add r2,r3,r3,lsl#2 @ *5
+ vdup.32 $R1,r3
+ add r3,r4,r4,lsl#2
+ vdup.32 $S1,r2
+ vdup.32 $R2,r4
+ add r4,r5,r5,lsl#2
+ vdup.32 $S2,r3
+ vdup.32 $R3,r5
+ add r5,r6,r6,lsl#2
+ vdup.32 $S3,r4
+ vdup.32 $R4,r6
+ vdup.32 $S4,r5
+
+ mov $zeros,#2 @ counter
+
+.Lsquare_neon:
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
+ @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4
+ @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4
+ @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4
+ @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4
+
+ vmull.u32 $D0,$R0,${R0}[1]
+ vmull.u32 $D1,$R1,${R0}[1]
+ vmull.u32 $D2,$R2,${R0}[1]
+ vmull.u32 $D3,$R3,${R0}[1]
+ vmull.u32 $D4,$R4,${R0}[1]
+
+ vmlal.u32 $D0,$R4,${S1}[1]
+ vmlal.u32 $D1,$R0,${R1}[1]
+ vmlal.u32 $D2,$R1,${R1}[1]
+ vmlal.u32 $D3,$R2,${R1}[1]
+ vmlal.u32 $D4,$R3,${R1}[1]
+
+ vmlal.u32 $D0,$R3,${S2}[1]
+ vmlal.u32 $D1,$R4,${S2}[1]
+ vmlal.u32 $D3,$R1,${R2}[1]
+ vmlal.u32 $D2,$R0,${R2}[1]
+ vmlal.u32 $D4,$R2,${R2}[1]
+
+ vmlal.u32 $D0,$R2,${S3}[1]
+ vmlal.u32 $D3,$R0,${R3}[1]
+ vmlal.u32 $D1,$R3,${S3}[1]
+ vmlal.u32 $D2,$R4,${S3}[1]
+ vmlal.u32 $D4,$R1,${R3}[1]
+
+ vmlal.u32 $D3,$R4,${S4}[1]
+ vmlal.u32 $D0,$R1,${S4}[1]
+ vmlal.u32 $D1,$R2,${S4}[1]
+ vmlal.u32 $D2,$R3,${S4}[1]
+ vmlal.u32 $D4,$R0,${R4}[1]
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
+ @ and P. Schwabe
+ @
+ @ H0>>+H1>>+H2>>+H3>>+H4
+ @ H3>>+H4>>*5+H0>>+H1
+ @
+ @ Trivia.
+ @
+ @ Result of multiplication of n-bit number by m-bit number is
+ @ n+m bits wide. However! Even though 2^n is a n+1-bit number,
+ @ m-bit number multiplied by 2^n is still n+m bits wide.
+ @
+ @ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
+ @ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
+ @ one is n+1 bits wide.
+ @
+ @ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
+ @ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
+ @ can be 27. However! In cases when their width exceeds 26 bits
+ @ they are limited by 2^26+2^6. This in turn means that *sum*
+ @ of the products with these values can still be viewed as sum
+ @ of 52-bit numbers as long as the amount of addends is not a
+ @ power of 2. For example,
+ @
+ @ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
+ @
+ @ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
+ @ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
+ @ 8 * (2^52) or 2^55. However, the value is then multiplied by
+ @ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
+ @ which is less than 32 * (2^52) or 2^57. And when processing
+ @ data we are looking at triple as many addends...
+ @
+ @ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
+ @ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
+ @ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
+ @ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
+ @ instruction accepts 2x32-bit input and writes 2x64-bit result.
+ @ This means that result of reduction have to be compressed upon
+ @ loop wrap-around. This can be done in the process of reduction
+ @ to minimize amount of instructions [as well as amount of
+ @ 128-bit instructions, which benefits low-end processors], but
+ @ one has to watch for H2 (which is narrower than H0) and 5*H4
+ @ not being wider than 58 bits, so that result of right shift
+ @ by 26 bits fits in 32 bits. This is also useful on x86,
+ @ because it allows to use paddd in place for paddq, which
+ @ benefits Atom, where paddq is ridiculously slow.
+
+ vshr.u64 $T0,$D3,#26
+ vmovn.i64 $D3#lo,$D3
+ vshr.u64 $T1,$D0,#26
+ vmovn.i64 $D0#lo,$D0
+ vadd.i64 $D4,$D4,$T0 @ h3 -> h4
+ vbic.i32 $D3#lo,#0xfc000000 @ &=0x03ffffff
+ vadd.i64 $D1,$D1,$T1 @ h0 -> h1
+ vbic.i32 $D0#lo,#0xfc000000
+
+ vshrn.u64 $T0#lo,$D4,#26
+ vmovn.i64 $D4#lo,$D4
+ vshr.u64 $T1,$D1,#26
+ vmovn.i64 $D1#lo,$D1
+ vadd.i64 $D2,$D2,$T1 @ h1 -> h2
+ vbic.i32 $D4#lo,#0xfc000000
+ vbic.i32 $D1#lo,#0xfc000000
+
+ vadd.i32 $D0#lo,$D0#lo,$T0#lo
+ vshl.u32 $T0#lo,$T0#lo,#2
+ vshrn.u64 $T1#lo,$D2,#26
+ vmovn.i64 $D2#lo,$D2
+ vadd.i32 $D0#lo,$D0#lo,$T0#lo @ h4 -> h0
+ vadd.i32 $D3#lo,$D3#lo,$T1#lo @ h2 -> h3
+ vbic.i32 $D2#lo,#0xfc000000
+
+ vshr.u32 $T0#lo,$D0#lo,#26
+ vbic.i32 $D0#lo,#0xfc000000
+ vshr.u32 $T1#lo,$D3#lo,#26
+ vbic.i32 $D3#lo,#0xfc000000
+ vadd.i32 $D1#lo,$D1#lo,$T0#lo @ h0 -> h1
+ vadd.i32 $D4#lo,$D4#lo,$T1#lo @ h3 -> h4
+
+ subs $zeros,$zeros,#1
+ beq .Lsquare_break_neon
+
+ add $tbl0,$ctx,#(48+0*9*4)
+ add $tbl1,$ctx,#(48+1*9*4)
+
+ vtrn.32 $R0,$D0#lo @ r^2:r^1
+ vtrn.32 $R2,$D2#lo
+ vtrn.32 $R3,$D3#lo
+ vtrn.32 $R1,$D1#lo
+ vtrn.32 $R4,$D4#lo
+
+ vshl.u32 $S2,$R2,#2 @ *5
+ vshl.u32 $S3,$R3,#2
+ vshl.u32 $S1,$R1,#2
+ vshl.u32 $S4,$R4,#2
+ vadd.i32 $S2,$S2,$R2
+ vadd.i32 $S1,$S1,$R1
+ vadd.i32 $S3,$S3,$R3
+ vadd.i32 $S4,$S4,$R4
+
+ vst4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
+ vst4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
+ vst4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
+ vst4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
+ vst1.32 {${S4}[0]},[$tbl0,:32]
+ vst1.32 {${S4}[1]},[$tbl1,:32]
+
+ b .Lsquare_neon
+
+.align 4
+.Lsquare_break_neon:
+ add $tbl0,$ctx,#(48+2*4*9)
+ add $tbl1,$ctx,#(48+3*4*9)
+
+ vmov $R0,$D0#lo @ r^4:r^3
+ vshl.u32 $S1,$D1#lo,#2 @ *5
+ vmov $R1,$D1#lo
+ vshl.u32 $S2,$D2#lo,#2
+ vmov $R2,$D2#lo
+ vshl.u32 $S3,$D3#lo,#2
+ vmov $R3,$D3#lo
+ vshl.u32 $S4,$D4#lo,#2
+ vmov $R4,$D4#lo
+ vadd.i32 $S1,$S1,$D1#lo
+ vadd.i32 $S2,$S2,$D2#lo
+ vadd.i32 $S3,$S3,$D3#lo
+ vadd.i32 $S4,$S4,$D4#lo
+
+ vst4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
+ vst4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
+ vst4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
+ vst4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
+ vst1.32 {${S4}[0]},[$tbl0]
+ vst1.32 {${S4}[1]},[$tbl1]
+
+ ret @ bx lr
+.size poly1305_init_neon,.-poly1305_init_neon
+
+#ifdef __KERNEL__
+.globl poly1305_blocks_neon
+#endif
+.type poly1305_blocks_neon,%function
+.align 5
+poly1305_blocks_neon:
+ ldr ip,[$ctx,#36] @ is_base2_26
+ ands $len,$len,#-16
+ beq .Lno_data_neon
+
+ cmp $len,#64
+ bhs .Lenter_neon
+ tst ip,ip @ is_base2_26?
+ beq .Lpoly1305_blocks
+
+.Lenter_neon:
+ stmdb sp!,{r4-r7}
+ vstmdb sp!,{d8-d15} @ ABI specification says so
+
+ tst ip,ip @ is_base2_26?
+ bne .Lbase2_26_neon
+
+ stmdb sp!,{r1-r3,lr}
+ bl .Lpoly1305_init_neon
+
+ ldr r4,[$ctx,#0] @ load hash value base 2^32
+ ldr r5,[$ctx,#4]
+ ldr r6,[$ctx,#8]
+ ldr r7,[$ctx,#12]
+ ldr ip,[$ctx,#16]
+
+ and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26
+ mov r3,r4,lsr#26
+ veor $D0#lo,$D0#lo,$D0#lo
+ mov r4,r5,lsr#20
+ orr r3,r3,r5,lsl#6
+ veor $D1#lo,$D1#lo,$D1#lo
+ mov r5,r6,lsr#14
+ orr r4,r4,r6,lsl#12
+ veor $D2#lo,$D2#lo,$D2#lo
+ mov r6,r7,lsr#8
+ orr r5,r5,r7,lsl#18
+ veor $D3#lo,$D3#lo,$D3#lo
+ and r3,r3,#0x03ffffff
+ orr r6,r6,ip,lsl#24
+ veor $D4#lo,$D4#lo,$D4#lo
+ and r4,r4,#0x03ffffff
+ mov r1,#1
+ and r5,r5,#0x03ffffff
+ str r1,[$ctx,#36] @ is_base2_26
+
+ vmov.32 $D0#lo[0],r2
+ vmov.32 $D1#lo[0],r3
+ vmov.32 $D2#lo[0],r4
+ vmov.32 $D3#lo[0],r5
+ vmov.32 $D4#lo[0],r6
+ adr $zeros,.Lzeros
+
+ ldmia sp!,{r1-r3,lr}
+ b .Lbase2_32_neon
+
+.align 4
+.Lbase2_26_neon:
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ load hash value
+
+ veor $D0#lo,$D0#lo,$D0#lo
+ veor $D1#lo,$D1#lo,$D1#lo
+ veor $D2#lo,$D2#lo,$D2#lo
+ veor $D3#lo,$D3#lo,$D3#lo
+ veor $D4#lo,$D4#lo,$D4#lo
+ vld4.32 {$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
+ adr $zeros,.Lzeros
+ vld1.32 {$D4#lo[0]},[$ctx]
+ sub $ctx,$ctx,#16 @ rewind
+
+.Lbase2_32_neon:
+ add $in2,$inp,#32
+ mov $padbit,$padbit,lsl#24
+ tst $len,#31
+ beq .Leven
+
+ vld4.32 {$H0#lo[0],$H1#lo[0],$H2#lo[0],$H3#lo[0]},[$inp]!
+ vmov.32 $H4#lo[0],$padbit
+ sub $len,$len,#16
+ add $in2,$inp,#32
+
+# ifdef __ARMEB__
+ vrev32.8 $H0,$H0
+ vrev32.8 $H3,$H3
+ vrev32.8 $H1,$H1
+ vrev32.8 $H2,$H2
+# endif
+ vsri.u32 $H4#lo,$H3#lo,#8 @ base 2^32 -> base 2^26
+ vshl.u32 $H3#lo,$H3#lo,#18
+
+ vsri.u32 $H3#lo,$H2#lo,#14
+ vshl.u32 $H2#lo,$H2#lo,#12
+ vadd.i32 $H4#hi,$H4#lo,$D4#lo @ add hash value and move to #hi
+
+ vbic.i32 $H3#lo,#0xfc000000
+ vsri.u32 $H2#lo,$H1#lo,#20
+ vshl.u32 $H1#lo,$H1#lo,#6
+
+ vbic.i32 $H2#lo,#0xfc000000
+ vsri.u32 $H1#lo,$H0#lo,#26
+ vadd.i32 $H3#hi,$H3#lo,$D3#lo
+
+ vbic.i32 $H0#lo,#0xfc000000
+ vbic.i32 $H1#lo,#0xfc000000
+ vadd.i32 $H2#hi,$H2#lo,$D2#lo
+
+ vadd.i32 $H0#hi,$H0#lo,$D0#lo
+ vadd.i32 $H1#hi,$H1#lo,$D1#lo
+
+ mov $tbl1,$zeros
+ add $tbl0,$ctx,#48
+
+ cmp $len,$len
+ b .Long_tail
+
+.align 4
+.Leven:
+ subs $len,$len,#64
+ it lo
+ movlo $in2,$zeros
+
+ vmov.i32 $H4,#1<<24 @ padbit, yes, always
+ vld4.32 {$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp] @ inp[0:1]
+ add $inp,$inp,#64
+ vld4.32 {$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2] @ inp[2:3] (or 0)
+ add $in2,$in2,#64
+ itt hi
+ addhi $tbl1,$ctx,#(48+1*9*4)
+ addhi $tbl0,$ctx,#(48+3*9*4)
+
+# ifdef __ARMEB__
+ vrev32.8 $H0,$H0
+ vrev32.8 $H3,$H3
+ vrev32.8 $H1,$H1
+ vrev32.8 $H2,$H2
+# endif
+ vsri.u32 $H4,$H3,#8 @ base 2^32 -> base 2^26
+ vshl.u32 $H3,$H3,#18
+
+ vsri.u32 $H3,$H2,#14
+ vshl.u32 $H2,$H2,#12
+
+ vbic.i32 $H3,#0xfc000000
+ vsri.u32 $H2,$H1,#20
+ vshl.u32 $H1,$H1,#6
+
+ vbic.i32 $H2,#0xfc000000
+ vsri.u32 $H1,$H0,#26
+
+ vbic.i32 $H0,#0xfc000000
+ vbic.i32 $H1,#0xfc000000
+
+ bls .Lskip_loop
+
+ vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^2
+ vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^4
+ vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
+ vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
+ b .Loop_neon
+
+.align 5
+.Loop_neon:
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
+ @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
+ @ \___________________/
+ @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
+ @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
+ @ \___________________/ \____________________/
+ @
+ @ Note that we start with inp[2:3]*r^2. This is because it
+ @ doesn't depend on reduction in previous iteration.
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4
+ @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4
+ @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4
+ @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4
+ @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ inp[2:3]*r^2
+
+ vadd.i32 $H2#lo,$H2#lo,$D2#lo @ accumulate inp[0:1]
+ vmull.u32 $D2,$H2#hi,${R0}[1]
+ vadd.i32 $H0#lo,$H0#lo,$D0#lo
+ vmull.u32 $D0,$H0#hi,${R0}[1]
+ vadd.i32 $H3#lo,$H3#lo,$D3#lo
+ vmull.u32 $D3,$H3#hi,${R0}[1]
+ vmlal.u32 $D2,$H1#hi,${R1}[1]
+ vadd.i32 $H1#lo,$H1#lo,$D1#lo
+ vmull.u32 $D1,$H1#hi,${R0}[1]
+
+ vadd.i32 $H4#lo,$H4#lo,$D4#lo
+ vmull.u32 $D4,$H4#hi,${R0}[1]
+ subs $len,$len,#64
+ vmlal.u32 $D0,$H4#hi,${S1}[1]
+ it lo
+ movlo $in2,$zeros
+ vmlal.u32 $D3,$H2#hi,${R1}[1]
+ vld1.32 ${S4}[1],[$tbl1,:32]
+ vmlal.u32 $D1,$H0#hi,${R1}[1]
+ vmlal.u32 $D4,$H3#hi,${R1}[1]
+
+ vmlal.u32 $D0,$H3#hi,${S2}[1]
+ vmlal.u32 $D3,$H1#hi,${R2}[1]
+ vmlal.u32 $D4,$H2#hi,${R2}[1]
+ vmlal.u32 $D1,$H4#hi,${S2}[1]
+ vmlal.u32 $D2,$H0#hi,${R2}[1]
+
+ vmlal.u32 $D3,$H0#hi,${R3}[1]
+ vmlal.u32 $D0,$H2#hi,${S3}[1]
+ vmlal.u32 $D4,$H1#hi,${R3}[1]
+ vmlal.u32 $D1,$H3#hi,${S3}[1]
+ vmlal.u32 $D2,$H4#hi,${S3}[1]
+
+ vmlal.u32 $D3,$H4#hi,${S4}[1]
+ vmlal.u32 $D0,$H1#hi,${S4}[1]
+ vmlal.u32 $D4,$H0#hi,${R4}[1]
+ vmlal.u32 $D1,$H2#hi,${S4}[1]
+ vmlal.u32 $D2,$H3#hi,${S4}[1]
+
+ vld4.32 {$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2] @ inp[2:3] (or 0)
+ add $in2,$in2,#64
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ (hash+inp[0:1])*r^4 and accumulate
+
+ vmlal.u32 $D3,$H3#lo,${R0}[0]
+ vmlal.u32 $D0,$H0#lo,${R0}[0]
+ vmlal.u32 $D4,$H4#lo,${R0}[0]
+ vmlal.u32 $D1,$H1#lo,${R0}[0]
+ vmlal.u32 $D2,$H2#lo,${R0}[0]
+ vld1.32 ${S4}[0],[$tbl0,:32]
+
+ vmlal.u32 $D3,$H2#lo,${R1}[0]
+ vmlal.u32 $D0,$H4#lo,${S1}[0]
+ vmlal.u32 $D4,$H3#lo,${R1}[0]
+ vmlal.u32 $D1,$H0#lo,${R1}[0]
+ vmlal.u32 $D2,$H1#lo,${R1}[0]
+
+ vmlal.u32 $D3,$H1#lo,${R2}[0]
+ vmlal.u32 $D0,$H3#lo,${S2}[0]
+ vmlal.u32 $D4,$H2#lo,${R2}[0]
+ vmlal.u32 $D1,$H4#lo,${S2}[0]
+ vmlal.u32 $D2,$H0#lo,${R2}[0]
+
+ vmlal.u32 $D3,$H0#lo,${R3}[0]
+ vmlal.u32 $D0,$H2#lo,${S3}[0]
+ vmlal.u32 $D4,$H1#lo,${R3}[0]
+ vmlal.u32 $D1,$H3#lo,${S3}[0]
+ vmlal.u32 $D3,$H4#lo,${S4}[0]
+
+ vmlal.u32 $D2,$H4#lo,${S3}[0]
+ vmlal.u32 $D0,$H1#lo,${S4}[0]
+ vmlal.u32 $D4,$H0#lo,${R4}[0]
+ vmov.i32 $H4,#1<<24 @ padbit, yes, always
+ vmlal.u32 $D1,$H2#lo,${S4}[0]
+ vmlal.u32 $D2,$H3#lo,${S4}[0]
+
+ vld4.32 {$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp] @ inp[0:1]
+ add $inp,$inp,#64
+# ifdef __ARMEB__
+ vrev32.8 $H0,$H0
+ vrev32.8 $H1,$H1
+ vrev32.8 $H2,$H2
+ vrev32.8 $H3,$H3
+# endif
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ lazy reduction interleaved with base 2^32 -> base 2^26 of
+ @ inp[0:3] previously loaded to $H0-$H3 and smashed to $H0-$H4.
+
+ vshr.u64 $T0,$D3,#26
+ vmovn.i64 $D3#lo,$D3
+ vshr.u64 $T1,$D0,#26
+ vmovn.i64 $D0#lo,$D0
+ vadd.i64 $D4,$D4,$T0 @ h3 -> h4
+ vbic.i32 $D3#lo,#0xfc000000
+ vsri.u32 $H4,$H3,#8 @ base 2^32 -> base 2^26
+ vadd.i64 $D1,$D1,$T1 @ h0 -> h1
+ vshl.u32 $H3,$H3,#18
+ vbic.i32 $D0#lo,#0xfc000000
+
+ vshrn.u64 $T0#lo,$D4,#26
+ vmovn.i64 $D4#lo,$D4
+ vshr.u64 $T1,$D1,#26
+ vmovn.i64 $D1#lo,$D1
+ vadd.i64 $D2,$D2,$T1 @ h1 -> h2
+ vsri.u32 $H3,$H2,#14
+ vbic.i32 $D4#lo,#0xfc000000
+ vshl.u32 $H2,$H2,#12
+ vbic.i32 $D1#lo,#0xfc000000
+
+ vadd.i32 $D0#lo,$D0#lo,$T0#lo
+ vshl.u32 $T0#lo,$T0#lo,#2
+ vbic.i32 $H3,#0xfc000000
+ vshrn.u64 $T1#lo,$D2,#26
+ vmovn.i64 $D2#lo,$D2
+ vaddl.u32 $D0,$D0#lo,$T0#lo @ h4 -> h0 [widen for a sec]
+ vsri.u32 $H2,$H1,#20
+ vadd.i32 $D3#lo,$D3#lo,$T1#lo @ h2 -> h3
+ vshl.u32 $H1,$H1,#6
+ vbic.i32 $D2#lo,#0xfc000000
+ vbic.i32 $H2,#0xfc000000
+
+ vshrn.u64 $T0#lo,$D0,#26 @ re-narrow
+ vmovn.i64 $D0#lo,$D0
+ vsri.u32 $H1,$H0,#26
+ vbic.i32 $H0,#0xfc000000
+ vshr.u32 $T1#lo,$D3#lo,#26
+ vbic.i32 $D3#lo,#0xfc000000
+ vbic.i32 $D0#lo,#0xfc000000
+ vadd.i32 $D1#lo,$D1#lo,$T0#lo @ h0 -> h1
+ vadd.i32 $D4#lo,$D4#lo,$T1#lo @ h3 -> h4
+ vbic.i32 $H1,#0xfc000000
+
+ bhi .Loop_neon
+
+.Lskip_loop:
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
+
+ add $tbl1,$ctx,#(48+0*9*4)
+ add $tbl0,$ctx,#(48+1*9*4)
+ adds $len,$len,#32
+ it ne
+ movne $len,#0
+ bne .Long_tail
+
+ vadd.i32 $H2#hi,$H2#lo,$D2#lo @ add hash value and move to #hi
+ vadd.i32 $H0#hi,$H0#lo,$D0#lo
+ vadd.i32 $H3#hi,$H3#lo,$D3#lo
+ vadd.i32 $H1#hi,$H1#lo,$D1#lo
+ vadd.i32 $H4#hi,$H4#lo,$D4#lo
+
+.Long_tail:
+ vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^1
+ vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^2
+
+ vadd.i32 $H2#lo,$H2#lo,$D2#lo @ can be redundant
+ vmull.u32 $D2,$H2#hi,$R0
+ vadd.i32 $H0#lo,$H0#lo,$D0#lo
+ vmull.u32 $D0,$H0#hi,$R0
+ vadd.i32 $H3#lo,$H3#lo,$D3#lo
+ vmull.u32 $D3,$H3#hi,$R0
+ vadd.i32 $H1#lo,$H1#lo,$D1#lo
+ vmull.u32 $D1,$H1#hi,$R0
+ vadd.i32 $H4#lo,$H4#lo,$D4#lo
+ vmull.u32 $D4,$H4#hi,$R0
+
+ vmlal.u32 $D0,$H4#hi,$S1
+ vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
+ vmlal.u32 $D3,$H2#hi,$R1
+ vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
+ vmlal.u32 $D1,$H0#hi,$R1
+ vmlal.u32 $D4,$H3#hi,$R1
+ vmlal.u32 $D2,$H1#hi,$R1
+
+ vmlal.u32 $D3,$H1#hi,$R2
+ vld1.32 ${S4}[1],[$tbl1,:32]
+ vmlal.u32 $D0,$H3#hi,$S2
+ vld1.32 ${S4}[0],[$tbl0,:32]
+ vmlal.u32 $D4,$H2#hi,$R2
+ vmlal.u32 $D1,$H4#hi,$S2
+ vmlal.u32 $D2,$H0#hi,$R2
+
+ vmlal.u32 $D3,$H0#hi,$R3
+ it ne
+ addne $tbl1,$ctx,#(48+2*9*4)
+ vmlal.u32 $D0,$H2#hi,$S3
+ it ne
+ addne $tbl0,$ctx,#(48+3*9*4)
+ vmlal.u32 $D4,$H1#hi,$R3
+ vmlal.u32 $D1,$H3#hi,$S3
+ vmlal.u32 $D2,$H4#hi,$S3
+
+ vmlal.u32 $D3,$H4#hi,$S4
+ vorn $MASK,$MASK,$MASK @ all-ones, can be redundant
+ vmlal.u32 $D0,$H1#hi,$S4
+ vshr.u64 $MASK,$MASK,#38
+ vmlal.u32 $D4,$H0#hi,$R4
+ vmlal.u32 $D1,$H2#hi,$S4
+ vmlal.u32 $D2,$H3#hi,$S4
+
+ beq .Lshort_tail
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ (hash+inp[0:1])*r^4:r^3 and accumulate
+
+ vld4.32 {${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]! @ load r^3
+ vld4.32 {${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]! @ load r^4
+
+ vmlal.u32 $D2,$H2#lo,$R0
+ vmlal.u32 $D0,$H0#lo,$R0
+ vmlal.u32 $D3,$H3#lo,$R0
+ vmlal.u32 $D1,$H1#lo,$R0
+ vmlal.u32 $D4,$H4#lo,$R0
+
+ vmlal.u32 $D0,$H4#lo,$S1
+ vld4.32 {${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
+ vmlal.u32 $D3,$H2#lo,$R1
+ vld4.32 {${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
+ vmlal.u32 $D1,$H0#lo,$R1
+ vmlal.u32 $D4,$H3#lo,$R1
+ vmlal.u32 $D2,$H1#lo,$R1
+
+ vmlal.u32 $D3,$H1#lo,$R2
+ vld1.32 ${S4}[1],[$tbl1,:32]
+ vmlal.u32 $D0,$H3#lo,$S2
+ vld1.32 ${S4}[0],[$tbl0,:32]
+ vmlal.u32 $D4,$H2#lo,$R2
+ vmlal.u32 $D1,$H4#lo,$S2
+ vmlal.u32 $D2,$H0#lo,$R2
+
+ vmlal.u32 $D3,$H0#lo,$R3
+ vmlal.u32 $D0,$H2#lo,$S3
+ vmlal.u32 $D4,$H1#lo,$R3
+ vmlal.u32 $D1,$H3#lo,$S3
+ vmlal.u32 $D2,$H4#lo,$S3
+
+ vmlal.u32 $D3,$H4#lo,$S4
+ vorn $MASK,$MASK,$MASK @ all-ones
+ vmlal.u32 $D0,$H1#lo,$S4
+ vshr.u64 $MASK,$MASK,#38
+ vmlal.u32 $D4,$H0#lo,$R4
+ vmlal.u32 $D1,$H2#lo,$S4
+ vmlal.u32 $D2,$H3#lo,$S4
+
+.Lshort_tail:
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ horizontal addition
+
+ vadd.i64 $D3#lo,$D3#lo,$D3#hi
+ vadd.i64 $D0#lo,$D0#lo,$D0#hi
+ vadd.i64 $D4#lo,$D4#lo,$D4#hi
+ vadd.i64 $D1#lo,$D1#lo,$D1#hi
+ vadd.i64 $D2#lo,$D2#lo,$D2#hi
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ lazy reduction, but without narrowing
+
+ vshr.u64 $T0,$D3,#26
+ vand.i64 $D3,$D3,$MASK
+ vshr.u64 $T1,$D0,#26
+ vand.i64 $D0,$D0,$MASK
+ vadd.i64 $D4,$D4,$T0 @ h3 -> h4
+ vadd.i64 $D1,$D1,$T1 @ h0 -> h1
+
+ vshr.u64 $T0,$D4,#26
+ vand.i64 $D4,$D4,$MASK
+ vshr.u64 $T1,$D1,#26
+ vand.i64 $D1,$D1,$MASK
+ vadd.i64 $D2,$D2,$T1 @ h1 -> h2
+
+ vadd.i64 $D0,$D0,$T0
+ vshl.u64 $T0,$T0,#2
+ vshr.u64 $T1,$D2,#26
+ vand.i64 $D2,$D2,$MASK
+ vadd.i64 $D0,$D0,$T0 @ h4 -> h0
+ vadd.i64 $D3,$D3,$T1 @ h2 -> h3
+
+ vshr.u64 $T0,$D0,#26
+ vand.i64 $D0,$D0,$MASK
+ vshr.u64 $T1,$D3,#26
+ vand.i64 $D3,$D3,$MASK
+ vadd.i64 $D1,$D1,$T0 @ h0 -> h1
+ vadd.i64 $D4,$D4,$T1 @ h3 -> h4
+
+ cmp $len,#0
+ bne .Leven
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ store hash value
+
+ vst4.32 {$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
+ vst1.32 {$D4#lo[0]},[$ctx]
+
+ vldmia sp!,{d8-d15} @ epilogue
+ ldmia sp!,{r4-r7}
+.Lno_data_neon:
+ ret @ bx lr
+.size poly1305_blocks_neon,.-poly1305_blocks_neon
+
+#ifdef __KERNEL__
+.globl poly1305_emit_neon
+#endif
+.type poly1305_emit_neon,%function
+.align 5
+poly1305_emit_neon:
+ ldr ip,[$ctx,#36] @ is_base2_26
+
+ stmdb sp!,{r4-r11}
+
+ tst ip,ip
+ beq .Lpoly1305_emit_enter
+
+ ldmia $ctx,{$h0-$h4}
+ eor $g0,$g0,$g0
+
+ adds $h0,$h0,$h1,lsl#26 @ base 2^26 -> base 2^32
+ mov $h1,$h1,lsr#6
+ adcs $h1,$h1,$h2,lsl#20
+ mov $h2,$h2,lsr#12
+ adcs $h2,$h2,$h3,lsl#14
+ mov $h3,$h3,lsr#18
+ adcs $h3,$h3,$h4,lsl#8
+ adc $h4,$g0,$h4,lsr#24 @ can be partially reduced ...
+
+ and $g0,$h4,#-4 @ ... so reduce
+ and $h4,$h3,#3
+ add $g0,$g0,$g0,lsr#2 @ *= 5
+ adds $h0,$h0,$g0
+ adcs $h1,$h1,#0
+ adcs $h2,$h2,#0
+ adcs $h3,$h3,#0
+ adc $h4,$h4,#0
+
+ adds $g0,$h0,#5 @ compare to modulus
+ adcs $g1,$h1,#0
+ adcs $g2,$h2,#0
+ adcs $g3,$h3,#0
+ adc $g4,$h4,#0
+ tst $g4,#4 @ did it carry/borrow?
+
+ it ne
+ movne $h0,$g0
+ ldr $g0,[$nonce,#0]
+ it ne
+ movne $h1,$g1
+ ldr $g1,[$nonce,#4]
+ it ne
+ movne $h2,$g2
+ ldr $g2,[$nonce,#8]
+ it ne
+ movne $h3,$g3
+ ldr $g3,[$nonce,#12]
+
+ adds $h0,$h0,$g0 @ accumulate nonce
+ adcs $h1,$h1,$g1
+ adcs $h2,$h2,$g2
+ adc $h3,$h3,$g3
+
+# ifdef __ARMEB__
+ rev $h0,$h0
+ rev $h1,$h1
+ rev $h2,$h2
+ rev $h3,$h3
+# endif
+ str $h0,[$mac,#0] @ store the result
+ str $h1,[$mac,#4]
+ str $h2,[$mac,#8]
+ str $h3,[$mac,#12]
+
+ ldmia sp!,{r4-r11}
+ ret @ bx lr
+.size poly1305_emit_neon,.-poly1305_emit_neon
+
+.align 5
+.Lzeros:
+.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+# ifndef __KERNEL__
+.LOPENSSL_armcap:
+.word OPENSSL_armcap_P-.Lpoly1305_init
+# endif
+#endif
+___
+} }
+$code.=<<___;
+.align 2
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+.comm OPENSSL_armcap_P,4,4
+#endif
+___
+
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/@/ and !/^$/);
+ print;
+}
+close SELF;
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo or
+ s/\bret\b/bx lr/go or
+ s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4
+
+ print $_,"\n";
+}
+close STDOUT; # enforce flush
new file mode 100644
@@ -0,0 +1,974 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements Poly1305 hash for ARMv8.
+#
+# June 2015
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone.
+#
+# IALU/gcc-4.9 NEON
+#
+# Apple A7 1.86/+5% 0.72
+# Cortex-A53 2.69/+58% 1.47
+# Cortex-A57 2.70/+7% 1.14
+# Denver 1.64/+50% 1.18(*)
+# X-Gene 2.13/+68% 2.27
+# Mongoose 1.77/+75% 1.12
+# Kryo 2.70/+55% 1.13
+#
+# (*) estimate based on resources availability is less than 1.0,
+# i.e. measured result is worse than expected, presumably binary
+# translator is not almighty;
+
+$flavour=shift;
+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+
+if ($flavour && $flavour ne "void") {
+ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+ ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+ ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+ die "can't locate arm-xlate.pl";
+
+ open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+ open STDOUT,">$output";
+}
+
+my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3));
+my ($mac,$nonce)=($inp,$len);
+
+my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14));
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+.extern OPENSSL_armcap_P
+#else
+# define poly1305_init poly1305_init_arm
+# define poly1305_blocks poly1305_blocks_arm
+# define poly1305_emit poly1305_emit_arm
+#endif
+
+.text
+
+// forward "declarations" are required for Apple
+.globl poly1305_blocks
+.globl poly1305_emit
+.globl poly1305_init
+.type poly1305_init,%function
+.align 5
+poly1305_init:
+ cmp $inp,xzr
+ stp xzr,xzr,[$ctx] // zero hash value
+ stp xzr,xzr,[$ctx,#16] // [along with is_base2_26]
+
+ csel x0,xzr,x0,eq
+ b.eq .Lno_key
+
+#ifndef __KERNEL__
+# ifdef __ILP32__
+ ldrsw $t1,.LOPENSSL_armcap_P
+# else
+ ldr $t1,.LOPENSSL_armcap_P
+# endif
+ adr $t0,.LOPENSSL_armcap_P
+ ldr w17,[$t0,$t1]
+#endif
+
+ ldp $r0,$r1,[$inp] // load key
+ mov $s1,#0xfffffffc0fffffff
+ movk $s1,#0x0fff,lsl#48
+#ifdef __AARCH64EB__
+ rev $r0,$r0 // flip bytes
+ rev $r1,$r1
+#endif
+ and $r0,$r0,$s1 // &=0ffffffc0fffffff
+ and $s1,$s1,#-4
+ and $r1,$r1,$s1 // &=0ffffffc0ffffffc
+ stp $r0,$r1,[$ctx,#32] // save key value
+
+#ifndef __KERNEL__
+ tst w17,#ARMV7_NEON
+
+ adr $d0,poly1305_blocks
+ adr $r0,poly1305_blocks_neon
+ adr $d1,poly1305_emit
+ adr $r1,poly1305_emit_neon
+
+ csel $d0,$d0,$r0,eq
+ csel $d1,$d1,$r1,eq
+
+# ifdef __ILP32__
+ stp w12,w13,[$len]
+# else
+ stp $d0,$d1,[$len]
+# endif
+
+ mov x0,#1
+#else
+ mov x0,#0
+#endif
+.Lno_key:
+ ret
+.size poly1305_init,.-poly1305_init
+
+.type poly1305_blocks,%function
+.align 5
+poly1305_blocks:
+ ands $len,$len,#-16
+ b.eq .Lno_data
+
+ ldp $h0,$h1,[$ctx] // load hash value
+ ldp $r0,$r1,[$ctx,#32] // load key value
+ ldr $h2,[$ctx,#16]
+ add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2)
+ b .Loop
+
+.align 5
+.Loop:
+ ldp $t0,$t1,[$inp],#16 // load input
+ sub $len,$len,#16
+#ifdef __AARCH64EB__
+ rev $t0,$t0
+ rev $t1,$t1
+#endif
+ adds $h0,$h0,$t0 // accumulate input
+ adcs $h1,$h1,$t1
+
+ mul $d0,$h0,$r0 // h0*r0
+ adc $h2,$h2,$padbit
+ umulh $d1,$h0,$r0
+
+ mul $t0,$h1,$s1 // h1*5*r1
+ umulh $t1,$h1,$s1
+
+ adds $d0,$d0,$t0
+ mul $t0,$h0,$r1 // h0*r1
+ adc $d1,$d1,$t1
+ umulh $d2,$h0,$r1
+
+ adds $d1,$d1,$t0
+ mul $t0,$h1,$r0 // h1*r0
+ adc $d2,$d2,xzr
+ umulh $t1,$h1,$r0
+
+ adds $d1,$d1,$t0
+ mul $t0,$h2,$s1 // h2*5*r1
+ adc $d2,$d2,$t1
+ mul $t1,$h2,$r0 // h2*r0
+
+ adds $d1,$d1,$t0
+ adc $d2,$d2,$t1
+
+ and $t0,$d2,#-4 // final reduction
+ and $h2,$d2,#3
+ add $t0,$t0,$d2,lsr#2
+ adds $h0,$d0,$t0
+ adcs $h1,$d1,xzr
+ adc $h2,$h2,xzr
+
+ cbnz $len,.Loop
+
+ stp $h0,$h1,[$ctx] // store hash value
+ str $h2,[$ctx,#16]
+
+.Lno_data:
+ ret
+.size poly1305_blocks,.-poly1305_blocks
+
+.type poly1305_emit,%function
+.align 5
+poly1305_emit:
+ ldp $h0,$h1,[$ctx] // load hash base 2^64
+ ldr $h2,[$ctx,#16]
+ ldp $t0,$t1,[$nonce] // load nonce
+
+ adds $d0,$h0,#5 // compare to modulus
+ adcs $d1,$h1,xzr
+ adc $d2,$h2,xzr
+
+ tst $d2,#-4 // see if it's carried/borrowed
+
+ csel $h0,$h0,$d0,eq
+ csel $h1,$h1,$d1,eq
+
+#ifdef __AARCH64EB__
+ ror $t0,$t0,#32 // flip nonce words
+ ror $t1,$t1,#32
+#endif
+ adds $h0,$h0,$t0 // accumulate nonce
+ adc $h1,$h1,$t1
+#ifdef __AARCH64EB__
+ rev $h0,$h0 // flip output bytes
+ rev $h1,$h1
+#endif
+ stp $h0,$h1,[$mac] // write result
+
+ ret
+.size poly1305_emit,.-poly1305_emit
+___
+my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8));
+my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13));
+my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18));
+my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23));
+my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28));
+my ($T0,$T1,$MASK) = map("v$_",(29..31));
+
+my ($in2,$zeros)=("x16","x17");
+my $is_base2_26 = $zeros; # borrow
+
+$code.=<<___;
+.type __poly1305_mult,%function
+.align 5
+__poly1305_mult:
+ mul $d0,$h0,$r0 // h0*r0
+ umulh $d1,$h0,$r0
+
+ mul $t0,$h1,$s1 // h1*5*r1
+ umulh $t1,$h1,$s1
+
+ adds $d0,$d0,$t0
+ mul $t0,$h0,$r1 // h0*r1
+ adc $d1,$d1,$t1
+ umulh $d2,$h0,$r1
+
+ adds $d1,$d1,$t0
+ mul $t0,$h1,$r0 // h1*r0
+ adc $d2,$d2,xzr
+ umulh $t1,$h1,$r0
+
+ adds $d1,$d1,$t0
+ mul $t0,$h2,$s1 // h2*5*r1
+ adc $d2,$d2,$t1
+ mul $t1,$h2,$r0 // h2*r0
+
+ adds $d1,$d1,$t0
+ adc $d2,$d2,$t1
+
+ and $t0,$d2,#-4 // final reduction
+ and $h2,$d2,#3
+ add $t0,$t0,$d2,lsr#2
+ adds $h0,$d0,$t0
+ adcs $h1,$d1,xzr
+ adc $h2,$h2,xzr
+
+ ret
+.size __poly1305_mult,.-__poly1305_mult
+
+.type __poly1305_splat,%function
+.align 5
+__poly1305_splat:
+ and x12,$h0,#0x03ffffff // base 2^64 -> base 2^26
+ ubfx x13,$h0,#26,#26
+ extr x14,$h1,$h0,#52
+ and x14,x14,#0x03ffffff
+ ubfx x15,$h1,#14,#26
+ extr x16,$h2,$h1,#40
+
+ str w12,[$ctx,#16*0] // r0
+ add w12,w13,w13,lsl#2 // r1*5
+ str w13,[$ctx,#16*1] // r1
+ add w13,w14,w14,lsl#2 // r2*5
+ str w12,[$ctx,#16*2] // s1
+ str w14,[$ctx,#16*3] // r2
+ add w14,w15,w15,lsl#2 // r3*5
+ str w13,[$ctx,#16*4] // s2
+ str w15,[$ctx,#16*5] // r3
+ add w15,w16,w16,lsl#2 // r4*5
+ str w14,[$ctx,#16*6] // s3
+ str w16,[$ctx,#16*7] // r4
+ str w15,[$ctx,#16*8] // s4
+
+ ret
+.size __poly1305_splat,.-__poly1305_splat
+
+#if !defined(__KERNEL__) || defined(CONFIG_KERNEL_MODE_NEON)
+#ifdef __KERNEL__
+.globl poly1305_blocks_neon
+.globl poly1305_emit_neon
+#endif
+
+.type poly1305_blocks_neon,%function
+.align 5
+poly1305_blocks_neon:
+ ldr $is_base2_26,[$ctx,#24]
+ cmp $len,#128
+ b.hs .Lblocks_neon
+ cbz $is_base2_26,poly1305_blocks
+
+.Lblocks_neon:
+ stp x29,x30,[sp,#-80]!
+ add x29,sp,#0
+
+ ands $len,$len,#-16
+ b.eq .Lno_data_neon
+
+ cbz $is_base2_26,.Lbase2_64_neon
+
+ ldp w10,w11,[$ctx] // load hash value base 2^26
+ ldp w12,w13,[$ctx,#8]
+ ldr w14,[$ctx,#16]
+
+ tst $len,#31
+ b.eq .Leven_neon
+
+ ldp $r0,$r1,[$ctx,#32] // load key value
+
+ add $h0,x10,x11,lsl#26 // base 2^26 -> base 2^64
+ lsr $h1,x12,#12
+ adds $h0,$h0,x12,lsl#52
+ add $h1,$h1,x13,lsl#14
+ adc $h1,$h1,xzr
+ lsr $h2,x14,#24
+ adds $h1,$h1,x14,lsl#40
+ adc $d2,$h2,xzr // can be partially reduced...
+
+ ldp $d0,$d1,[$inp],#16 // load input
+ sub $len,$len,#16
+ add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2)
+
+ and $t0,$d2,#-4 // ... so reduce
+ and $h2,$d2,#3
+ add $t0,$t0,$d2,lsr#2
+ adds $h0,$h0,$t0
+ adcs $h1,$h1,xzr
+ adc $h2,$h2,xzr
+
+#ifdef __AARCH64EB__
+ rev $d0,$d0
+ rev $d1,$d1
+#endif
+ adds $h0,$h0,$d0 // accumulate input
+ adcs $h1,$h1,$d1
+ adc $h2,$h2,$padbit
+
+ bl __poly1305_mult
+ ldr x30,[sp,#8]
+
+ cbz $padbit,.Lstore_base2_64_neon
+
+ and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26
+ ubfx x11,$h0,#26,#26
+ extr x12,$h1,$h0,#52
+ and x12,x12,#0x03ffffff
+ ubfx x13,$h1,#14,#26
+ extr x14,$h2,$h1,#40
+
+ cbnz $len,.Leven_neon
+
+ stp w10,w11,[$ctx] // store hash value base 2^26
+ stp w12,w13,[$ctx,#8]
+ str w14,[$ctx,#16]
+ b .Lno_data_neon
+
+.align 4
+.Lstore_base2_64_neon:
+ stp $h0,$h1,[$ctx] // store hash value base 2^64
+ stp $h2,xzr,[$ctx,#16] // note that is_base2_26 is zeroed
+ b .Lno_data_neon
+
+.align 4
+.Lbase2_64_neon:
+ ldp $r0,$r1,[$ctx,#32] // load key value
+
+ ldp $h0,$h1,[$ctx] // load hash value base 2^64
+ ldr $h2,[$ctx,#16]
+
+ tst $len,#31
+ b.eq .Linit_neon
+
+ ldp $d0,$d1,[$inp],#16 // load input
+ sub $len,$len,#16
+ add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2)
+#ifdef __AARCH64EB__
+ rev $d0,$d0
+ rev $d1,$d1
+#endif
+ adds $h0,$h0,$d0 // accumulate input
+ adcs $h1,$h1,$d1
+ adc $h2,$h2,$padbit
+
+ bl __poly1305_mult
+
+.Linit_neon:
+ and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26
+ ubfx x11,$h0,#26,#26
+ extr x12,$h1,$h0,#52
+ and x12,x12,#0x03ffffff
+ ubfx x13,$h1,#14,#26
+ extr x14,$h2,$h1,#40
+
+ stp d8,d9,[sp,#16] // meet ABI requirements
+ stp d10,d11,[sp,#32]
+ stp d12,d13,[sp,#48]
+ stp d14,d15,[sp,#64]
+
+ fmov ${H0},x10
+ fmov ${H1},x11
+ fmov ${H2},x12
+ fmov ${H3},x13
+ fmov ${H4},x14
+
+ ////////////////////////////////// initialize r^n table
+ mov $h0,$r0 // r^1
+ add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2)
+ mov $h1,$r1
+ mov $h2,xzr
+ add $ctx,$ctx,#48+12
+ bl __poly1305_splat
+
+ bl __poly1305_mult // r^2
+ sub $ctx,$ctx,#4
+ bl __poly1305_splat
+
+ bl __poly1305_mult // r^3
+ sub $ctx,$ctx,#4
+ bl __poly1305_splat
+
+ bl __poly1305_mult // r^4
+ sub $ctx,$ctx,#4
+ bl __poly1305_splat
+ ldr x30,[sp,#8]
+
+ add $in2,$inp,#32
+ adr $zeros,.Lzeros
+ subs $len,$len,#64
+ csel $in2,$zeros,$in2,lo
+
+ mov x4,#1
+ str x4,[$ctx,#-24] // set is_base2_26
+ sub $ctx,$ctx,#48 // restore original $ctx
+ b .Ldo_neon
+
+.align 4
+.Leven_neon:
+ add $in2,$inp,#32
+ adr $zeros,.Lzeros
+ subs $len,$len,#64
+ csel $in2,$zeros,$in2,lo
+
+ stp d8,d9,[sp,#16] // meet ABI requirements
+ stp d10,d11,[sp,#32]
+ stp d12,d13,[sp,#48]
+ stp d14,d15,[sp,#64]
+
+ fmov ${H0},x10
+ fmov ${H1},x11
+ fmov ${H2},x12
+ fmov ${H3},x13
+ fmov ${H4},x14
+
+.Ldo_neon:
+ ldp x8,x12,[$in2],#16 // inp[2:3] (or zero)
+ ldp x9,x13,[$in2],#48
+
+ lsl $padbit,$padbit,#24
+ add x15,$ctx,#48
+
+#ifdef __AARCH64EB__
+ rev x8,x8
+ rev x12,x12
+ rev x9,x9
+ rev x13,x13
+#endif
+ and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
+ and x5,x9,#0x03ffffff
+ ubfx x6,x8,#26,#26
+ ubfx x7,x9,#26,#26
+ add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
+ extr x8,x12,x8,#52
+ extr x9,x13,x9,#52
+ add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
+ fmov $IN23_0,x4
+ and x8,x8,#0x03ffffff
+ and x9,x9,#0x03ffffff
+ ubfx x10,x12,#14,#26
+ ubfx x11,x13,#14,#26
+ add x12,$padbit,x12,lsr#40
+ add x13,$padbit,x13,lsr#40
+ add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
+ fmov $IN23_1,x6
+ add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
+ add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
+ fmov $IN23_2,x8
+ fmov $IN23_3,x10
+ fmov $IN23_4,x12
+
+ ldp x8,x12,[$inp],#16 // inp[0:1]
+ ldp x9,x13,[$inp],#48
+
+ ld1 {$R0,$R1,$S1,$R2},[x15],#64
+ ld1 {$S2,$R3,$S3,$R4},[x15],#64
+ ld1 {$S4},[x15]
+
+#ifdef __AARCH64EB__
+ rev x8,x8
+ rev x12,x12
+ rev x9,x9
+ rev x13,x13
+#endif
+ and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
+ and x5,x9,#0x03ffffff
+ ubfx x6,x8,#26,#26
+ ubfx x7,x9,#26,#26
+ add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
+ extr x8,x12,x8,#52
+ extr x9,x13,x9,#52
+ add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
+ fmov $IN01_0,x4
+ and x8,x8,#0x03ffffff
+ and x9,x9,#0x03ffffff
+ ubfx x10,x12,#14,#26
+ ubfx x11,x13,#14,#26
+ add x12,$padbit,x12,lsr#40
+ add x13,$padbit,x13,lsr#40
+ add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
+ fmov $IN01_1,x6
+ add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
+ add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
+ movi $MASK.2d,#-1
+ fmov $IN01_2,x8
+ fmov $IN01_3,x10
+ fmov $IN01_4,x12
+ ushr $MASK.2d,$MASK.2d,#38
+
+ b.ls .Lskip_loop
+
+.align 4
+.Loop_neon:
+ ////////////////////////////////////////////////////////////////
+ // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
+ // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
+ // \___________________/
+ // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
+ // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
+ // \___________________/ \____________________/
+ //
+ // Note that we start with inp[2:3]*r^2. This is because it
+ // doesn't depend on reduction in previous iteration.
+ ////////////////////////////////////////////////////////////////
+ // d4 = h0*r4 + h1*r3 + h2*r2 + h3*r1 + h4*r0
+ // d3 = h0*r3 + h1*r2 + h2*r1 + h3*r0 + h4*5*r4
+ // d2 = h0*r2 + h1*r1 + h2*r0 + h3*5*r4 + h4*5*r3
+ // d1 = h0*r1 + h1*r0 + h2*5*r4 + h3*5*r3 + h4*5*r2
+ // d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
+
+ subs $len,$len,#64
+ umull $ACC4,$IN23_0,${R4}[2]
+ csel $in2,$zeros,$in2,lo
+ umull $ACC3,$IN23_0,${R3}[2]
+ umull $ACC2,$IN23_0,${R2}[2]
+ ldp x8,x12,[$in2],#16 // inp[2:3] (or zero)
+ umull $ACC1,$IN23_0,${R1}[2]
+ ldp x9,x13,[$in2],#48
+ umull $ACC0,$IN23_0,${R0}[2]
+#ifdef __AARCH64EB__
+ rev x8,x8
+ rev x12,x12
+ rev x9,x9
+ rev x13,x13
+#endif
+
+ umlal $ACC4,$IN23_1,${R3}[2]
+ and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
+ umlal $ACC3,$IN23_1,${R2}[2]
+ and x5,x9,#0x03ffffff
+ umlal $ACC2,$IN23_1,${R1}[2]
+ ubfx x6,x8,#26,#26
+ umlal $ACC1,$IN23_1,${R0}[2]
+ ubfx x7,x9,#26,#26
+ umlal $ACC0,$IN23_1,${S4}[2]
+ add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
+
+ umlal $ACC4,$IN23_2,${R2}[2]
+ extr x8,x12,x8,#52
+ umlal $ACC3,$IN23_2,${R1}[2]
+ extr x9,x13,x9,#52
+ umlal $ACC2,$IN23_2,${R0}[2]
+ add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
+ umlal $ACC1,$IN23_2,${S4}[2]
+ fmov $IN23_0,x4
+ umlal $ACC0,$IN23_2,${S3}[2]
+ and x8,x8,#0x03ffffff
+
+ umlal $ACC4,$IN23_3,${R1}[2]
+ and x9,x9,#0x03ffffff
+ umlal $ACC3,$IN23_3,${R0}[2]
+ ubfx x10,x12,#14,#26
+ umlal $ACC2,$IN23_3,${S4}[2]
+ ubfx x11,x13,#14,#26
+ umlal $ACC1,$IN23_3,${S3}[2]
+ add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
+ umlal $ACC0,$IN23_3,${S2}[2]
+ fmov $IN23_1,x6
+
+ add $IN01_2,$IN01_2,$H2
+ add x12,$padbit,x12,lsr#40
+ umlal $ACC4,$IN23_4,${R0}[2]
+ add x13,$padbit,x13,lsr#40
+ umlal $ACC3,$IN23_4,${S4}[2]
+ add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
+ umlal $ACC2,$IN23_4,${S3}[2]
+ add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
+ umlal $ACC1,$IN23_4,${S2}[2]
+ fmov $IN23_2,x8
+ umlal $ACC0,$IN23_4,${S1}[2]
+ fmov $IN23_3,x10
+
+ ////////////////////////////////////////////////////////////////
+ // (hash+inp[0:1])*r^4 and accumulate
+
+ add $IN01_0,$IN01_0,$H0
+ fmov $IN23_4,x12
+ umlal $ACC3,$IN01_2,${R1}[0]
+ ldp x8,x12,[$inp],#16 // inp[0:1]
+ umlal $ACC0,$IN01_2,${S3}[0]
+ ldp x9,x13,[$inp],#48
+ umlal $ACC4,$IN01_2,${R2}[0]
+ umlal $ACC1,$IN01_2,${S4}[0]
+ umlal $ACC2,$IN01_2,${R0}[0]
+#ifdef __AARCH64EB__
+ rev x8,x8
+ rev x12,x12
+ rev x9,x9
+ rev x13,x13
+#endif
+
+ add $IN01_1,$IN01_1,$H1
+ umlal $ACC3,$IN01_0,${R3}[0]
+ umlal $ACC4,$IN01_0,${R4}[0]
+ and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
+ umlal $ACC2,$IN01_0,${R2}[0]
+ and x5,x9,#0x03ffffff
+ umlal $ACC0,$IN01_0,${R0}[0]
+ ubfx x6,x8,#26,#26
+ umlal $ACC1,$IN01_0,${R1}[0]
+ ubfx x7,x9,#26,#26
+
+ add $IN01_3,$IN01_3,$H3
+ add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
+ umlal $ACC3,$IN01_1,${R2}[0]
+ extr x8,x12,x8,#52
+ umlal $ACC4,$IN01_1,${R3}[0]
+ extr x9,x13,x9,#52
+ umlal $ACC0,$IN01_1,${S4}[0]
+ add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
+ umlal $ACC2,$IN01_1,${R1}[0]
+ fmov $IN01_0,x4
+ umlal $ACC1,$IN01_1,${R0}[0]
+ and x8,x8,#0x03ffffff
+
+ add $IN01_4,$IN01_4,$H4
+ and x9,x9,#0x03ffffff
+ umlal $ACC3,$IN01_3,${R0}[0]
+ ubfx x10,x12,#14,#26
+ umlal $ACC0,$IN01_3,${S2}[0]
+ ubfx x11,x13,#14,#26
+ umlal $ACC4,$IN01_3,${R1}[0]
+ add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
+ umlal $ACC1,$IN01_3,${S3}[0]
+ fmov $IN01_1,x6
+ umlal $ACC2,$IN01_3,${S4}[0]
+ add x12,$padbit,x12,lsr#40
+
+ umlal $ACC3,$IN01_4,${S4}[0]
+ add x13,$padbit,x13,lsr#40
+ umlal $ACC0,$IN01_4,${S1}[0]
+ add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
+ umlal $ACC4,$IN01_4,${R0}[0]
+ add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
+ umlal $ACC1,$IN01_4,${S2}[0]
+ fmov $IN01_2,x8
+ umlal $ACC2,$IN01_4,${S3}[0]
+ fmov $IN01_3,x10
+ fmov $IN01_4,x12
+
+ /////////////////////////////////////////////////////////////////
+ // lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
+ // and P. Schwabe
+ //
+ // [see discussion in poly1305-armv4 module]
+
+ ushr $T0.2d,$ACC3,#26
+ xtn $H3,$ACC3
+ ushr $T1.2d,$ACC0,#26
+ and $ACC0,$ACC0,$MASK.2d
+ add $ACC4,$ACC4,$T0.2d // h3 -> h4
+ bic $H3,#0xfc,lsl#24 // &=0x03ffffff
+ add $ACC1,$ACC1,$T1.2d // h0 -> h1
+
+ ushr $T0.2d,$ACC4,#26
+ xtn $H4,$ACC4
+ ushr $T1.2d,$ACC1,#26
+ xtn $H1,$ACC1
+ bic $H4,#0xfc,lsl#24
+ add $ACC2,$ACC2,$T1.2d // h1 -> h2
+
+ add $ACC0,$ACC0,$T0.2d
+ shl $T0.2d,$T0.2d,#2
+ shrn $T1.2s,$ACC2,#26
+ xtn $H2,$ACC2
+ add $ACC0,$ACC0,$T0.2d // h4 -> h0
+ bic $H1,#0xfc,lsl#24
+ add $H3,$H3,$T1.2s // h2 -> h3
+ bic $H2,#0xfc,lsl#24
+
+ shrn $T0.2s,$ACC0,#26
+ xtn $H0,$ACC0
+ ushr $T1.2s,$H3,#26
+ bic $H3,#0xfc,lsl#24
+ bic $H0,#0xfc,lsl#24
+ add $H1,$H1,$T0.2s // h0 -> h1
+ add $H4,$H4,$T1.2s // h3 -> h4
+
+ b.hi .Loop_neon
+
+.Lskip_loop:
+ dup $IN23_2,${IN23_2}[0]
+ add $IN01_2,$IN01_2,$H2
+
+ ////////////////////////////////////////////////////////////////
+ // multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
+
+ adds $len,$len,#32
+ b.ne .Long_tail
+
+ dup $IN23_2,${IN01_2}[0]
+ add $IN23_0,$IN01_0,$H0
+ add $IN23_3,$IN01_3,$H3
+ add $IN23_1,$IN01_1,$H1
+ add $IN23_4,$IN01_4,$H4
+
+.Long_tail:
+ dup $IN23_0,${IN23_0}[0]
+ umull2 $ACC0,$IN23_2,${S3}
+ umull2 $ACC3,$IN23_2,${R1}
+ umull2 $ACC4,$IN23_2,${R2}
+ umull2 $ACC2,$IN23_2,${R0}
+ umull2 $ACC1,$IN23_2,${S4}
+
+ dup $IN23_1,${IN23_1}[0]
+ umlal2 $ACC0,$IN23_0,${R0}
+ umlal2 $ACC2,$IN23_0,${R2}
+ umlal2 $ACC3,$IN23_0,${R3}
+ umlal2 $ACC4,$IN23_0,${R4}
+ umlal2 $ACC1,$IN23_0,${R1}
+
+ dup $IN23_3,${IN23_3}[0]
+ umlal2 $ACC0,$IN23_1,${S4}
+ umlal2 $ACC3,$IN23_1,${R2}
+ umlal2 $ACC2,$IN23_1,${R1}
+ umlal2 $ACC4,$IN23_1,${R3}
+ umlal2 $ACC1,$IN23_1,${R0}
+
+ dup $IN23_4,${IN23_4}[0]
+ umlal2 $ACC3,$IN23_3,${R0}
+ umlal2 $ACC4,$IN23_3,${R1}
+ umlal2 $ACC0,$IN23_3,${S2}
+ umlal2 $ACC1,$IN23_3,${S3}
+ umlal2 $ACC2,$IN23_3,${S4}
+
+ umlal2 $ACC3,$IN23_4,${S4}
+ umlal2 $ACC0,$IN23_4,${S1}
+ umlal2 $ACC4,$IN23_4,${R0}
+ umlal2 $ACC1,$IN23_4,${S2}
+ umlal2 $ACC2,$IN23_4,${S3}
+
+ b.eq .Lshort_tail
+
+ ////////////////////////////////////////////////////////////////
+ // (hash+inp[0:1])*r^4:r^3 and accumulate
+
+ add $IN01_0,$IN01_0,$H0
+ umlal $ACC3,$IN01_2,${R1}
+ umlal $ACC0,$IN01_2,${S3}
+ umlal $ACC4,$IN01_2,${R2}
+ umlal $ACC1,$IN01_2,${S4}
+ umlal $ACC2,$IN01_2,${R0}
+
+ add $IN01_1,$IN01_1,$H1
+ umlal $ACC3,$IN01_0,${R3}
+ umlal $ACC0,$IN01_0,${R0}
+ umlal $ACC4,$IN01_0,${R4}
+ umlal $ACC1,$IN01_0,${R1}
+ umlal $ACC2,$IN01_0,${R2}
+
+ add $IN01_3,$IN01_3,$H3
+ umlal $ACC3,$IN01_1,${R2}
+ umlal $ACC0,$IN01_1,${S4}
+ umlal $ACC4,$IN01_1,${R3}
+ umlal $ACC1,$IN01_1,${R0}
+ umlal $ACC2,$IN01_1,${R1}
+
+ add $IN01_4,$IN01_4,$H4
+ umlal $ACC3,$IN01_3,${R0}
+ umlal $ACC0,$IN01_3,${S2}
+ umlal $ACC4,$IN01_3,${R1}
+ umlal $ACC1,$IN01_3,${S3}
+ umlal $ACC2,$IN01_3,${S4}
+
+ umlal $ACC3,$IN01_4,${S4}
+ umlal $ACC0,$IN01_4,${S1}
+ umlal $ACC4,$IN01_4,${R0}
+ umlal $ACC1,$IN01_4,${S2}
+ umlal $ACC2,$IN01_4,${S3}
+
+.Lshort_tail:
+ ////////////////////////////////////////////////////////////////
+ // horizontal add
+
+ addp $ACC3,$ACC3,$ACC3
+ ldp d8,d9,[sp,#16] // meet ABI requirements
+ addp $ACC0,$ACC0,$ACC0
+ ldp d10,d11,[sp,#32]
+ addp $ACC4,$ACC4,$ACC4
+ ldp d12,d13,[sp,#48]
+ addp $ACC1,$ACC1,$ACC1
+ ldp d14,d15,[sp,#64]
+ addp $ACC2,$ACC2,$ACC2
+
+ ////////////////////////////////////////////////////////////////
+ // lazy reduction, but without narrowing
+
+ ushr $T0.2d,$ACC3,#26
+ and $ACC3,$ACC3,$MASK.2d
+ ushr $T1.2d,$ACC0,#26
+ and $ACC0,$ACC0,$MASK.2d
+
+ add $ACC4,$ACC4,$T0.2d // h3 -> h4
+ add $ACC1,$ACC1,$T1.2d // h0 -> h1
+
+ ushr $T0.2d,$ACC4,#26
+ and $ACC4,$ACC4,$MASK.2d
+ ushr $T1.2d,$ACC1,#26
+ and $ACC1,$ACC1,$MASK.2d
+ add $ACC2,$ACC2,$T1.2d // h1 -> h2
+
+ add $ACC0,$ACC0,$T0.2d
+ shl $T0.2d,$T0.2d,#2
+ ushr $T1.2d,$ACC2,#26
+ and $ACC2,$ACC2,$MASK.2d
+ add $ACC0,$ACC0,$T0.2d // h4 -> h0
+ add $ACC3,$ACC3,$T1.2d // h2 -> h3
+
+ ushr $T0.2d,$ACC0,#26
+ and $ACC0,$ACC0,$MASK.2d
+ ushr $T1.2d,$ACC3,#26
+ and $ACC3,$ACC3,$MASK.2d
+ add $ACC1,$ACC1,$T0.2d // h0 -> h1
+ add $ACC4,$ACC4,$T1.2d // h3 -> h4
+
+ ////////////////////////////////////////////////////////////////
+ // write the result, can be partially reduced
+
+ st4 {$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16
+ st1 {$ACC4}[0],[$ctx]
+
+.Lno_data_neon:
+ ldr x29,[sp],#80
+ ret
+.size poly1305_blocks_neon,.-poly1305_blocks_neon
+
+.type poly1305_emit_neon,%function
+.align 5
+poly1305_emit_neon:
+ ldr $is_base2_26,[$ctx,#24]
+ cbz $is_base2_26,poly1305_emit
+
+ ldp w10,w11,[$ctx] // load hash value base 2^26
+ ldp w12,w13,[$ctx,#8]
+ ldr w14,[$ctx,#16]
+
+ add $h0,x10,x11,lsl#26 // base 2^26 -> base 2^64
+ lsr $h1,x12,#12
+ adds $h0,$h0,x12,lsl#52
+ add $h1,$h1,x13,lsl#14
+ adc $h1,$h1,xzr
+ lsr $h2,x14,#24
+ adds $h1,$h1,x14,lsl#40
+ adc $h2,$h2,xzr // can be partially reduced...
+
+ ldp $t0,$t1,[$nonce] // load nonce
+
+ and $d0,$h2,#-4 // ... so reduce
+ add $d0,$d0,$h2,lsr#2
+ and $h2,$h2,#3
+ adds $h0,$h0,$d0
+ adcs $h1,$h1,xzr
+ adc $h2,$h2,xzr
+
+ adds $d0,$h0,#5 // compare to modulus
+ adcs $d1,$h1,xzr
+ adc $d2,$h2,xzr
+
+ tst $d2,#-4 // see if it's carried/borrowed
+
+ csel $h0,$h0,$d0,eq
+ csel $h1,$h1,$d1,eq
+
+#ifdef __AARCH64EB__
+ ror $t0,$t0,#32 // flip nonce words
+ ror $t1,$t1,#32
+#endif
+ adds $h0,$h0,$t0 // accumulate nonce
+ adc $h1,$h1,$t1
+#ifdef __AARCH64EB__
+ rev $h0,$h0 // flip output bytes
+ rev $h1,$h1
+#endif
+ stp $h0,$h1,[$mac] // write result
+
+ ret
+.size poly1305_emit_neon,.-poly1305_emit_neon
+#endif
+
+.align 5
+.Lzeros:
+.long 0,0,0,0,0,0,0,0
+#ifndef __KERNEL__
+.LOPENSSL_armcap_P:
+#ifdef __ILP32__
+.long OPENSSL_armcap_P-.
+#else
+.quad OPENSSL_armcap_P-.
+#endif
+#endif
+.align 2
+___
+
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/\/\// and !/^$/);
+ print;
+}
+close SELF;
+
+foreach (split("\n",$code)) {
+ s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/ or
+ s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/ or
+ (m/\bdup\b/ and (s/\.[24]s/.2d/g or 1)) or
+ (m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1)) or
+ (m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1)) or
+ (m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1)) or
+ (m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1));
+
+ s/\.[124]([sd])\[/.$1\[/;
+
+ print $_,"\n";
+}
+close STDOUT;
@@ -18,6 +18,8 @@
#if defined(CONFIG_ZINC_ARCH_X86_64)
#include "poly1305-x86_64-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
+#include "poly1305-arm-glue.c"
#else
static inline bool poly1305_init_arch(void *ctx,
const u8 key[POLY1305_KEY_SIZE])
These ARM implementations come from Andy Polyakov's implementations, and perform extremely well on ARMv4+, with optimized paths for NEON and non-NEON. The NEON code uses base 2^26, while the scalar code uses base 2^64 on 64-bit and base 2^32 on 32-bit. If we hit the unfortunate situation of using NEON and then having to go back to scalar -- because the user is silly and has called the update function from two separate contexts -- then we need to convert back to the original base before proceeding. It is possible to reason that the initial reduction below is sufficient given the implementation invariants. However, for an avoidance of doubt and because this is not performance critical, we do the full reduction anyway. This conversion is found in the glue code, and a proof of correctness may be easily obtained from Z3: <https://xn--4db.cc/ltPtHCKN/py>. While this is CRYPTOGAMS code, the originating code for this happens to be the same as OpenSSL's commit 9925a82146f2503b4dd11423d0eba649b43450c0 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Co-developed-by: Andy Polyakov <appro@openssl.org> Cc: Andy Polyakov <appro@openssl.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Samuel Neves <sneves@dei.uc.pt> Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-crypto@vger.kernel.org --- lib/zinc/Makefile | 4 +- lib/zinc/poly1305/poly1305-arm-glue.c | 140 +++ lib/zinc/poly1305/poly1305-arm.pl | 1276 +++++++++++++++++++++++++ lib/zinc/poly1305/poly1305-arm64.pl | 974 +++++++++++++++++++ lib/zinc/poly1305/poly1305.c | 2 + 5 files changed, 2395 insertions(+), 1 deletion(-) create mode 100644 lib/zinc/poly1305/poly1305-arm-glue.c create mode 100644 lib/zinc/poly1305/poly1305-arm.pl create mode 100644 lib/zinc/poly1305/poly1305-arm64.pl