@@ -4,7 +4,9 @@ ccflags-$(CONFIG_ZINC_DEBUG) += -DDEBUG
zinc_chacha20-y := chacha20/chacha20.o
zinc_chacha20-$(CONFIG_ZINC_ARCH_X86_64) += chacha20/chacha20-x86_64.o
-perlasm-targets += chacha20/chacha20-x86_64.S
+zinc_chacha20-$(CONFIG_ZINC_ARCH_ARM) += chacha20/chacha20-arm.o chacha20/chacha20-unrolled-arm.o
+zinc_chacha20-$(CONFIG_ZINC_ARCH_ARM64) += chacha20/chacha20-arm64.o
+perlasm-targets += chacha20/chacha20-x86_64.S chacha20/chacha20-arm.S chacha20/chacha20-arm64.S
obj-$(CONFIG_ZINC_CHACHA20) += zinc_chacha20.o
quiet_cmd_perlasm = PERLASM $@
new file mode 100644
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#if defined(CONFIG_ZINC_ARCH_ARM)
+#include <asm/system_info.h>
+#include <asm/cputype.h>
+#endif
+
+asmlinkage void chacha20_arm(u8 *out, const u8 *in, const size_t len,
+ const u32 key[8], const u32 counter[4]);
+asmlinkage void hchacha20_arm(const u32 state[16], u32 out[8]);
+asmlinkage void chacha20_neon(u8 *out, const u8 *in, const size_t len,
+ const u32 key[8], const u32 counter[4]);
+
+static bool chacha20_use_neon __ro_after_init;
+static bool *const chacha20_nobs[] __initconst = { &chacha20_use_neon };
+static void __init chacha20_fpu_init(void)
+{
+#if defined(CONFIG_ZINC_ARCH_ARM64)
+ chacha20_use_neon = elf_hwcap & HWCAP_ASIMD;
+#elif defined(CONFIG_ZINC_ARCH_ARM)
+ switch (read_cpuid_part()) {
+ case ARM_CPU_PART_CORTEX_A7:
+ case ARM_CPU_PART_CORTEX_A5:
+ /* The Cortex-A7 and Cortex-A5 do not perform well with the NEON
+ * implementation but do incredibly with the scalar one and use
+ * less power.
+ */
+ break;
+ default:
+ chacha20_use_neon = elf_hwcap & HWCAP_NEON;
+ }
+#endif
+}
+
+static inline bool chacha20_arch(struct chacha20_ctx *ctx, u8 *dst,
+ const u8 *src, size_t len,
+ simd_context_t *simd_context)
+{
+ /* SIMD disables preemption, so relax after processing each page. */
+ BUILD_BUG_ON(PAGE_SIZE < CHACHA20_BLOCK_SIZE ||
+ PAGE_SIZE % CHACHA20_BLOCK_SIZE);
+
+ for (;;) {
+ if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && chacha20_use_neon &&
+ len >= CHACHA20_BLOCK_SIZE * 3 && simd_use(simd_context)) {
+ const size_t bytes = min_t(size_t, len, PAGE_SIZE);
+
+ chacha20_neon(dst, src, bytes, ctx->key, ctx->counter);
+ ctx->counter[0] += (bytes + 63) / 64;
+ len -= bytes;
+ if (!len)
+ break;
+ dst += bytes;
+ src += bytes;
+ simd_relax(simd_context);
+ } else {
+ chacha20_arm(dst, src, len, ctx->key, ctx->counter);
+ ctx->counter[0] += (len + 63) / 64;
+ break;
+ }
+ }
+
+ return true;
+}
+
+static inline bool hchacha20_arch(u32 derived_key[CHACHA20_KEY_WORDS],
+ const u8 nonce[HCHACHA20_NONCE_SIZE],
+ const u8 key[HCHACHA20_KEY_SIZE],
+ simd_context_t *simd_context)
+{
+ if (IS_ENABLED(CONFIG_ZINC_ARCH_ARM)) {
+ u32 x[] = { CHACHA20_CONSTANT_EXPA,
+ CHACHA20_CONSTANT_ND_3,
+ CHACHA20_CONSTANT_2_BY,
+ CHACHA20_CONSTANT_TE_K,
+ get_unaligned_le32(key + 0),
+ get_unaligned_le32(key + 4),
+ get_unaligned_le32(key + 8),
+ get_unaligned_le32(key + 12),
+ get_unaligned_le32(key + 16),
+ get_unaligned_le32(key + 20),
+ get_unaligned_le32(key + 24),
+ get_unaligned_le32(key + 28),
+ get_unaligned_le32(nonce + 0),
+ get_unaligned_le32(nonce + 4),
+ get_unaligned_le32(nonce + 8),
+ get_unaligned_le32(nonce + 12)
+ };
+ hchacha20_arm(x, derived_key);
+ return true;
+ }
+ return false;
+}
new file mode 100644
@@ -0,0 +1,1227 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# December 2014
+#
+# ChaCha20 for ARMv4.
+#
+# September 2018
+#
+# Improve scalar performance per Eric Biggers' suggestion to eliminate
+# separate rotates. This requires b[0..3] and d[0..3] to be maintained
+# pre-rotated, hence odd twists prior inner loop and when accumulating
+# key material. Since amount of instructions is reduced as result, even
+# NEON performance is improved somewhat, most notably by ~9% on low-end
+# Cortex-A5/A7. Full unroll was shown to provide even better scalar
+# performance on Cortex-A5/A7, naturally at the cost of manyfold size
+# increase. We let it be. Oversized code works in benchmarks, but is not
+# necessarily optimal in real life, when it's likely to be out-of-cache
+# upon entry and evict significant part of cache upon completion.
+#
+# Performance in cycles per byte out of large buffer.
+#
+# IALU/gcc-4.4 1xNEON 3xNEON+1xIALU
+#
+# Cortex-A5 14.2(*)/+160% 21.8 12.9(**)
+# Cortex-A8 10.2(*)/+190% 13.9 6.10
+# Cortex-A9 10.8(*)/+150% 14.3 6.50
+# Cortex-A15 11.0/+40% 16.0 4.90
+# Snapdragon S4 13.9(***)/+90% 13.6 4.90
+#
+# (*) most "favourable" result for aligned data on little-endian
+# processor, result for misaligned data is 10-15% lower;
+# (**) pure 4xNEON [with "vertical" layout] was shown to provide ~8%
+# better performance on Cortex-A5/A7, but not on others;
+# (***) it's 17% slower than original, trade-off is considered
+# acceptable, because of improvement on others, specifically
+# +36% on Cortex-A5/A7 and +20% on Cortex-A9;
+
+$flavour = shift;
+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+
+if ($flavour && $flavour ne "void") {
+ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+ ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+ ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+ die "can't locate arm-xlate.pl";
+
+ open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+ open STDOUT,">$output";
+}
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+my @x=map("r$_",(0..7,"x","x","x","x",12,"x",14,"x"));
+my @t=map("r$_",(8..11));
+
+sub ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+my $odd = $d0&1;
+my ($xc,$xc_) = (@t[0..1]);
+my ($xd,$xd_) = $odd ? (@t[2],@x[$d1]) : (@x[$d0],@t[2]);
+my @ret;
+
+ # Consider order in which variables are addressed by their
+ # index:
+ #
+ # a b c d
+ #
+ # 0 4 8 12 < even round
+ # 1 5 9 13
+ # 2 6 10 14
+ # 3 7 11 15
+ # 0 5 10 15 < odd round
+ # 1 6 11 12
+ # 2 7 8 13
+ # 3 4 9 14
+ #
+ # 'a', 'b' are permanently allocated in registers, @x[0..7],
+ # while 'c's and pair of 'd's are maintained in memory. If
+ # you observe 'c' column, you'll notice that pair of 'c's is
+ # invariant between rounds. This means that we have to reload
+ # them once per round, in the middle. This is why you'll see
+ # bunch of 'c' stores and loads in the middle, but none in
+ # the beginning or end. If you observe 'd' column, you'll
+ # notice that 15 and 13 are reused in next pair of rounds.
+ # This is why these two are chosen for offloading to memory,
+ # to make loads count more.
+ push @ret,(
+ "&add (@x[$a0],@x[$a0],@x[$b0],'ror#13')",
+ "&add (@x[$a1],@x[$a1],@x[$b1],'ror#13')",
+ "&eor ($xd,@x[$a0],$xd,'ror#24')",
+ "&eor ($xd_,@x[$a1],$xd_,'ror#24')",
+
+ "&add ($xc,$xc,$xd,'ror#16')",
+ "&add ($xc_,$xc_,$xd_,'ror#16')",
+ "&eor (@x[$b0],$xc, @x[$b0],'ror#13')",
+ "&eor (@x[$b1],$xc_,@x[$b1],'ror#13')",
+
+ "&add (@x[$a0],@x[$a0],@x[$b0],'ror#20')",
+ "&add (@x[$a1],@x[$a1],@x[$b1],'ror#20')",
+ "&eor ($xd,@x[$a0],$xd,'ror#16')",
+ "&eor ($xd_,@x[$a1],$xd_,'ror#16')" );
+ push @ret,(
+ "&str ($xd,'[sp,#4*(16+$d0)]')" ) if ($odd);
+ push @ret,(
+ "&add ($xc,$xc,$xd,'ror#24')" );
+ push @ret,(
+ "&ldr ($xd,'[sp,#4*(16+$d2)]')" ) if ($odd);
+ push @ret,(
+ "&str ($xd_,'[sp,#4*(16+$d1)]')" ) if (!$odd);
+ push @ret,(
+ "&add ($xc_,$xc_,$xd_,'ror#24')" );
+ push @ret,(
+ "&ldr ($xd_,'[sp,#4*(16+$d3)]')" ) if (!$odd);
+ push @ret,(
+ "&str ($xc,'[sp,#4*(16+$c0)]')",
+ "&eor (@x[$b0],@x[$b0],$xc,'ror#12')",
+ "&str ($xc_,'[sp,#4*(16+$c1)]')",
+ "&eor (@x[$b1],@x[$b1],$xc_,'ror#12')" );
+
+ $xd=@x[$d2] if (!$odd);
+ $xd_=@x[$d3] if ($odd);
+ push @ret,(
+ "&ldr ($xc,'[sp,#4*(16+$c2)]')",
+ "&add (@x[$a2],@x[$a2],@x[$b2],'ror#13')",
+ "&ldr ($xc_,'[sp,#4*(16+$c3)]')",
+ "&add (@x[$a3],@x[$a3],@x[$b3],'ror#13')",
+ "&eor ($xd,@x[$a2],$xd,'ror#24')",
+ "&eor ($xd_,@x[$a3],$xd_,'ror#24')",
+
+ "&add ($xc,$xc,$xd,'ror#16')",
+ "&add ($xc_,$xc_,$xd_,'ror#16')",
+ "&eor (@x[$b2],$xc, @x[$b2],'ror#13')",
+ "&eor (@x[$b3],$xc_,@x[$b3],'ror#13')",
+
+ "&add (@x[$a2],@x[$a2],@x[$b2],'ror#20')",
+ "&add (@x[$a3],@x[$a3],@x[$b3],'ror#20')",
+ "&eor ($xd,@x[$a2],$xd,'ror#16')",
+ "&eor ($xd_,@x[$a3],$xd_,'ror#16')",
+
+ "&add ($xc,$xc,$xd,'ror#24')",
+ "&add ($xc_,$xc_,$xd_,'ror#24')",
+ "&eor (@x[$b2],@x[$b2],$xc,'ror#12')",
+ "&eor (@x[$b3],@x[$b3],$xc_,'ror#12')" );
+
+ @ret;
+}
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+#else
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
+# define ChaCha20_ctr32 chacha20_arm_cryptogams
+# define ChaCha20_neon chacha20_neon
+#endif
+
+.text
+#if defined(__thumb2__) || defined(__clang__)
+.syntax unified
+# define ldrhsb ldrbhs
+#endif
+#if defined(__thumb2__)
+.thumb
+#else
+.code 32
+#endif
+
+.align 5
+.Lsigma:
+.long 0x61707865,0x3320646e,0x79622d32,0x6b206574 @ endian-neutral
+.Lone:
+.long 1,0,0,0
+.Lrot8:
+.long 0x02010003,0x06050407
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+.LOPENSSL_armcap:
+.word OPENSSL_armcap_P-.LChaCha20_ctr32
+#else
+.word -1
+#endif
+
+.globl ChaCha20_ctr32
+.type ChaCha20_ctr32,%function
+.align 5
+ChaCha20_ctr32:
+.LChaCha20_ctr32:
+ ldr r12,[sp,#0] @ pull pointer to counter and nonce
+ stmdb sp!,{r0-r2,r4-r11,lr}
+#if __ARM_ARCH__<7 && !defined(__thumb2__)
+ sub r14,pc,#16 @ ChaCha20_ctr32
+#else
+ adr r14,.LChaCha20_ctr32
+#endif
+ cmp r2,#0 @ len==0?
+#ifdef __thumb2__
+ itt eq
+#endif
+ addeq sp,sp,#4*3
+ beq .Lno_data
+#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
+ cmp r2,#192 @ test len
+ bls .Lshort
+ ldr r4,[r14,#-24]
+ ldr r4,[r14,r4]
+# ifdef __APPLE__
+ ldr r4,[r4]
+# endif
+ tst r4,#ARMV7_NEON
+ bne .LChaCha20_neon
+.Lshort:
+#endif
+ ldmia r12,{r4-r7} @ load counter and nonce
+ sub sp,sp,#4*(16) @ off-load area
+ sub r14,r14,#64 @ .Lsigma
+ stmdb sp!,{r4-r7} @ copy counter and nonce
+ ldmia r3,{r4-r11} @ load key
+ ldmia r14,{r0-r3} @ load sigma
+ stmdb sp!,{r4-r11} @ copy key
+ stmdb sp!,{r0-r3} @ copy sigma
+ str r10,[sp,#4*(16+10)] @ off-load "@x[10]"
+ str r11,[sp,#4*(16+11)] @ off-load "@x[11]"
+ b .Loop_outer_enter
+
+.align 4
+.Loop_outer:
+ ldmia sp,{r0-r9} @ load key material
+ str @t[3],[sp,#4*(32+2)] @ save len
+ str r12, [sp,#4*(32+1)] @ save inp
+ str r14, [sp,#4*(32+0)] @ save out
+.Loop_outer_enter:
+ ldr @t[3], [sp,#4*(15)]
+ mov @x[4],@x[4],ror#19 @ twist b[0..3]
+ ldr @x[12],[sp,#4*(12)] @ modulo-scheduled load
+ mov @x[5],@x[5],ror#19
+ ldr @t[2], [sp,#4*(13)]
+ mov @x[6],@x[6],ror#19
+ ldr @x[14],[sp,#4*(14)]
+ mov @x[7],@x[7],ror#19
+ mov @t[3],@t[3],ror#8 @ twist d[0..3]
+ mov @x[12],@x[12],ror#8
+ mov @t[2],@t[2],ror#8
+ mov @x[14],@x[14],ror#8
+ str @t[3], [sp,#4*(16+15)]
+ mov @t[3],#10
+ b .Loop
+
+.align 4
+.Loop:
+ subs @t[3],@t[3],#1
+___
+ foreach (&ROUND(0, 4, 8,12)) { eval; }
+ foreach (&ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+ bne .Loop
+
+ ldr @t[3],[sp,#4*(32+2)] @ load len
+
+ str @t[0], [sp,#4*(16+8)] @ modulo-scheduled store
+ str @t[1], [sp,#4*(16+9)]
+ str @x[12],[sp,#4*(16+12)]
+ str @t[2], [sp,#4*(16+13)]
+ str @x[14],[sp,#4*(16+14)]
+
+ @ at this point we have first half of 512-bit result in
+ @ @x[0-7] and second half at sp+4*(16+8)
+
+ cmp @t[3],#64 @ done yet?
+#ifdef __thumb2__
+ itete lo
+#endif
+ addlo r12,sp,#4*(0) @ shortcut or ...
+ ldrhs r12,[sp,#4*(32+1)] @ ... load inp
+ addlo r14,sp,#4*(0) @ shortcut or ...
+ ldrhs r14,[sp,#4*(32+0)] @ ... load out
+
+ ldr @t[0],[sp,#4*(0)] @ load key material
+ ldr @t[1],[sp,#4*(1)]
+
+#if __ARM_ARCH__>=6 || !defined(__ARMEB__)
+# if __ARM_ARCH__<7
+ orr @t[2],r12,r14
+ tst @t[2],#3 @ are input and output aligned?
+ ldr @t[2],[sp,#4*(2)]
+ bne .Lunaligned
+ cmp @t[3],#64 @ restore flags
+# else
+ ldr @t[2],[sp,#4*(2)]
+# endif
+ ldr @t[3],[sp,#4*(3)]
+
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ add @x[1],@x[1],@t[1]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[0],[r12],#16 @ load input
+ ldrhs @t[1],[r12,#-12]
+
+ add @x[2],@x[2],@t[2]
+ add @x[3],@x[3],@t[3]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[2],[r12,#-8]
+ ldrhs @t[3],[r12,#-4]
+# if __ARM_ARCH__>=6 && defined(__ARMEB__)
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+# endif
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[0],@x[0],@t[0] @ xor with input
+ eorhs @x[1],@x[1],@t[1]
+ add @t[0],sp,#4*(4)
+ str @x[0],[r14],#16 @ store output
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[2],@x[2],@t[2]
+ eorhs @x[3],@x[3],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[1],[r14,#-12]
+ str @x[2],[r14,#-8]
+ str @x[3],[r14,#-4]
+
+ add @x[4],@t[0],@x[4],ror#13 @ accumulate key material
+ add @x[5],@t[1],@x[5],ror#13
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[0],[r12],#16 @ load input
+ ldrhs @t[1],[r12,#-12]
+ add @x[6],@t[2],@x[6],ror#13
+ add @x[7],@t[3],@x[7],ror#13
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[2],[r12,#-8]
+ ldrhs @t[3],[r12,#-4]
+# if __ARM_ARCH__>=6 && defined(__ARMEB__)
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[4],@x[4],@t[0]
+ eorhs @x[5],@x[5],@t[1]
+ add @t[0],sp,#4*(8)
+ str @x[4],[r14],#16 @ store output
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[6],@x[6],@t[2]
+ eorhs @x[7],@x[7],@t[3]
+ str @x[5],[r14,#-12]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[6],[r14,#-8]
+ add @x[0],sp,#4*(16+8)
+ str @x[7],[r14,#-4]
+
+ ldmia @x[0],{@x[0]-@x[7]} @ load second half
+
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ add @x[1],@x[1],@t[1]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[0],[r12],#16 @ load input
+ ldrhs @t[1],[r12,#-12]
+# ifdef __thumb2__
+ itt hi
+# endif
+ strhi @t[2],[sp,#4*(16+10)] @ copy "@x[10]" while at it
+ strhi @t[3],[sp,#4*(16+11)] @ copy "@x[11]" while at it
+ add @x[2],@x[2],@t[2]
+ add @x[3],@x[3],@t[3]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[2],[r12,#-8]
+ ldrhs @t[3],[r12,#-4]
+# if __ARM_ARCH__>=6 && defined(__ARMEB__)
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+# endif
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[0],@x[0],@t[0]
+ eorhs @x[1],@x[1],@t[1]
+ add @t[0],sp,#4*(12)
+ str @x[0],[r14],#16 @ store output
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[2],@x[2],@t[2]
+ eorhs @x[3],@x[3],@t[3]
+ str @x[1],[r14,#-12]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[2],[r14,#-8]
+ str @x[3],[r14,#-4]
+
+ add @x[4],@t[0],@x[4],ror#24 @ accumulate key material
+ add @x[5],@t[1],@x[5],ror#24
+# ifdef __thumb2__
+ itt hi
+# endif
+ addhi @t[0],@t[0],#1 @ next counter value
+ strhi @t[0],[sp,#4*(12)] @ save next counter value
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[0],[r12],#16 @ load input
+ ldrhs @t[1],[r12,#-12]
+ add @x[6],@t[2],@x[6],ror#24
+ add @x[7],@t[3],@x[7],ror#24
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhs @t[2],[r12,#-8]
+ ldrhs @t[3],[r12,#-4]
+# if __ARM_ARCH__>=6 && defined(__ARMEB__)
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[4],@x[4],@t[0]
+ eorhs @x[5],@x[5],@t[1]
+# ifdef __thumb2__
+ it ne
+# endif
+ ldrne @t[0],[sp,#4*(32+2)] @ re-load len
+# ifdef __thumb2__
+ itt hs
+# endif
+ eorhs @x[6],@x[6],@t[2]
+ eorhs @x[7],@x[7],@t[3]
+ str @x[4],[r14],#16 @ store output
+ str @x[5],[r14,#-12]
+# ifdef __thumb2__
+ it hs
+# endif
+ subhs @t[3],@t[0],#64 @ len-=64
+ str @x[6],[r14,#-8]
+ str @x[7],[r14,#-4]
+ bhi .Loop_outer
+
+ beq .Ldone
+# if __ARM_ARCH__<7
+ b .Ltail
+
+.align 4
+.Lunaligned: @ unaligned endian-neutral path
+ cmp @t[3],#64 @ restore flags
+# endif
+#endif
+#if __ARM_ARCH__<7
+ ldr @t[3],[sp,#4*(3)]
+___
+for ($i=0;$i<16;$i+=4) {
+my $j=$i&0x7;
+my $twist="";
+if ($i==4) { $twist = ",ror#13"; }
+elsif ($i==12) { $twist = ",ror#24"; }
+
+$code.=<<___ if ($i==4);
+ add @x[0],sp,#4*(16+8)
+___
+$code.=<<___ if ($i==8);
+ ldmia @x[0],{@x[0]-@x[7]} @ load second half
+# ifdef __thumb2__
+ itt hi
+# endif
+ strhi @t[2],[sp,#4*(16+10)] @ copy "@x[10]"
+ strhi @t[3],[sp,#4*(16+11)] @ copy "@x[11]"
+___
+$code.=<<___;
+ add @x[$j+0],@t[0],@x[$j+0]$twist @ accumulate key material
+___
+$code.=<<___ if ($i==12);
+# ifdef __thumb2__
+ itt hi
+# endif
+ addhi @t[0],@t[0],#1 @ next counter value
+ strhi @t[0],[sp,#4*(12)] @ save next counter value
+___
+$code.=<<___;
+ add @x[$j+1],@t[1],@x[$j+1]$twist
+ add @x[$j+2],@t[2],@x[$j+2]$twist
+# ifdef __thumb2__
+ itete lo
+# endif
+ eorlo @t[0],@t[0],@t[0] @ zero or ...
+ ldrhsb @t[0],[r12],#16 @ ... load input
+ eorlo @t[1],@t[1],@t[1]
+ ldrhsb @t[1],[r12,#-12]
+
+ add @x[$j+3],@t[3],@x[$j+3]$twist
+# ifdef __thumb2__
+ itete lo
+# endif
+ eorlo @t[2],@t[2],@t[2]
+ ldrhsb @t[2],[r12,#-8]
+ eorlo @t[3],@t[3],@t[3]
+ ldrhsb @t[3],[r12,#-4]
+
+ eor @x[$j+0],@t[0],@x[$j+0] @ xor with input (or zero)
+ eor @x[$j+1],@t[1],@x[$j+1]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[0],[r12,#-15] @ load more input
+ ldrhsb @t[1],[r12,#-11]
+ eor @x[$j+2],@t[2],@x[$j+2]
+ strb @x[$j+0],[r14],#16 @ store output
+ eor @x[$j+3],@t[3],@x[$j+3]
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[2],[r12,#-7]
+ ldrhsb @t[3],[r12,#-3]
+ strb @x[$j+1],[r14,#-12]
+ eor @x[$j+0],@t[0],@x[$j+0],lsr#8
+ strb @x[$j+2],[r14,#-8]
+ eor @x[$j+1],@t[1],@x[$j+1],lsr#8
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[0],[r12,#-14] @ load more input
+ ldrhsb @t[1],[r12,#-10]
+ strb @x[$j+3],[r14,#-4]
+ eor @x[$j+2],@t[2],@x[$j+2],lsr#8
+ strb @x[$j+0],[r14,#-15]
+ eor @x[$j+3],@t[3],@x[$j+3],lsr#8
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[2],[r12,#-6]
+ ldrhsb @t[3],[r12,#-2]
+ strb @x[$j+1],[r14,#-11]
+ eor @x[$j+0],@t[0],@x[$j+0],lsr#8
+ strb @x[$j+2],[r14,#-7]
+ eor @x[$j+1],@t[1],@x[$j+1],lsr#8
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[0],[r12,#-13] @ load more input
+ ldrhsb @t[1],[r12,#-9]
+ strb @x[$j+3],[r14,#-3]
+ eor @x[$j+2],@t[2],@x[$j+2],lsr#8
+ strb @x[$j+0],[r14,#-14]
+ eor @x[$j+3],@t[3],@x[$j+3],lsr#8
+# ifdef __thumb2__
+ itt hs
+# endif
+ ldrhsb @t[2],[r12,#-5]
+ ldrhsb @t[3],[r12,#-1]
+ strb @x[$j+1],[r14,#-10]
+ strb @x[$j+2],[r14,#-6]
+ eor @x[$j+0],@t[0],@x[$j+0],lsr#8
+ strb @x[$j+3],[r14,#-2]
+ eor @x[$j+1],@t[1],@x[$j+1],lsr#8
+ strb @x[$j+0],[r14,#-13]
+ eor @x[$j+2],@t[2],@x[$j+2],lsr#8
+ strb @x[$j+1],[r14,#-9]
+ eor @x[$j+3],@t[3],@x[$j+3],lsr#8
+ strb @x[$j+2],[r14,#-5]
+ strb @x[$j+3],[r14,#-1]
+___
+$code.=<<___ if ($i<12);
+ add @t[0],sp,#4*(4+$i)
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+___
+}
+$code.=<<___;
+# ifdef __thumb2__
+ it ne
+# endif
+ ldrne @t[0],[sp,#4*(32+2)] @ re-load len
+# ifdef __thumb2__
+ it hs
+# endif
+ subhs @t[3],@t[0],#64 @ len-=64
+ bhi .Loop_outer
+
+ beq .Ldone
+#endif
+
+.Ltail:
+ ldr r12,[sp,#4*(32+1)] @ load inp
+ add @t[1],sp,#4*(0)
+ ldr r14,[sp,#4*(32+0)] @ load out
+
+.Loop_tail:
+ ldrb @t[2],[@t[1]],#1 @ read buffer on stack
+ ldrb @t[3],[r12],#1 @ read input
+ subs @t[0],@t[0],#1
+ eor @t[3],@t[3],@t[2]
+ strb @t[3],[r14],#1 @ store output
+ bne .Loop_tail
+
+.Ldone:
+ add sp,sp,#4*(32+3)
+.Lno_data:
+#if __ARM_ARCH__>=5
+ ldmia sp!,{r4-r11,pc}
+#else
+ ldmia sp!,{r4-r12,lr}
+ tst lr,#1
+ moveq pc,lr @ be binary compatible with V4, yet
+ .long 0xe12fff1e @ interoperable with Thumb ISA:-)
+#endif
+.size ChaCha20_ctr32,.-ChaCha20_ctr32
+___
+
+{{{
+my ($a0,$b0,$c0,$d0,$a1,$b1,$c1,$d1,$a2,$b2,$c2,$d2,$t0,$t1,$t2,$t3) =
+ map("q$_",(0..15));
+
+# This can replace vshr-by-24+vsli-by-8. It gives ~3% improvement on
+# Cortex-A5/A7, but hurts Cortex-A9 by 5% and Snapdragon S4 by 14%!
+sub vperm()
+{ my ($dst,$src,$tbl) = @_;
+ $code .= " vtbl.8 $dst#lo,{$src#lo},$tbl#lo\n";
+ $code .= " vtbl.8 $dst#hi,{$src#hi},$tbl#lo\n";
+}
+
+sub NEONROUND {
+my $odd = pop;
+my ($a,$b,$c,$d,$t)=@_;
+
+ (
+ "&vadd_i32 ($a,$a,$b)",
+ "&veor ($d,$d,$a)",
+ "&vrev32_16 ($d,$d)", # vrot ($d,16)
+
+ "&vadd_i32 ($c,$c,$d)",
+ "&veor ($t,$b,$c)",
+ "&vshr_u32 ($b,$t,20)",
+ "&vsli_32 ($b,$t,12)",
+
+ "&vadd_i32 ($a,$a,$b)",
+ "&veor ($t,$d,$a)",
+ "&vshr_u32 ($d,$t,24)",
+ "&vsli_32 ($d,$t,8)",
+ #"&vperm ($d,$t,$t3)",
+
+ "&vadd_i32 ($c,$c,$d)",
+ "&veor ($t,$b,$c)",
+ "&vshr_u32 ($b,$t,25)",
+ "&vsli_32 ($b,$t,7)",
+
+ "&vext_8 ($c,$c,$c,8)",
+ "&vext_8 ($b,$b,$b,$odd?12:4)",
+ "&vext_8 ($d,$d,$d,$odd?4:12)"
+ );
+}
+
+$code.=<<___;
+#if (defined(__KERNEL__) && defined(CONFIG_KERNEL_MODE_NEON)) || (!defined(__KERNEL__) && __ARM_MAX_ARCH__>=7)
+.arch armv7-a
+.fpu neon
+
+# ifdef __KERNEL__
+.globl ChaCha20_neon
+@ For optimal performance it's appropriate for caller to enforce
+@ minimum input length, 193 bytes is suggested.
+# endif
+.type ChaCha20_neon,%function
+.align 5
+ChaCha20_neon:
+ ldr r12,[sp,#0] @ pull pointer to counter and nonce
+ stmdb sp!,{r0-r2,r4-r11,lr}
+.LChaCha20_neon:
+ adr r14,.Lsigma
+ vstmdb sp!,{d8-d15} @ ABI spec says so
+ stmdb sp!,{r0-r3}
+
+ vld1.32 {$b0-$c0},[r3] @ load key
+ ldmia r3,{r4-r11} @ load key
+
+ sub sp,sp,#4*(16+16)
+ vld1.32 {$d0},[r12] @ load counter and nonce
+ add r12,sp,#4*8
+ ldmia r14,{r0-r3} @ load sigma
+ vld1.32 {$a0},[r14]! @ load sigma
+ vld1.32 {$t0},[r14]! @ one
+ @ vld1.32 {$t3#lo},[r14] @ rot8
+ vst1.32 {$c0-$d0},[r12] @ copy 1/2key|counter|nonce
+ vst1.32 {$a0-$b0},[sp] @ copy sigma|1/2key
+
+ str r10,[sp,#4*(16+10)] @ off-load "@x[10]"
+ str r11,[sp,#4*(16+11)] @ off-load "@x[11]"
+ vshl.i32 $t1#lo,$t0#lo,#1 @ two
+ vstr $t0#lo,[sp,#4*(16+0)]
+ vshl.i32 $t2#lo,$t0#lo,#2 @ four
+ vstr $t1#lo,[sp,#4*(16+2)]
+ vmov $a1,$a0
+ vstr $t2#lo,[sp,#4*(16+4)]
+ vmov $a2,$a0
+ @ vstr $t3#lo,[sp,#4*(16+6)]
+ vmov $b1,$b0
+ vmov $b2,$b0
+ b .Loop_neon_enter
+
+.align 4
+.Loop_neon_outer:
+ ldmia sp,{r0-r9} @ load key material
+ cmp @t[3],#64*2 @ if len<=64*2
+ bls .Lbreak_neon @ switch to integer-only
+ @ vldr $t3#lo,[sp,#4*(16+6)] @ rot8
+ vmov $a1,$a0
+ str @t[3],[sp,#4*(32+2)] @ save len
+ vmov $a2,$a0
+ str r12, [sp,#4*(32+1)] @ save inp
+ vmov $b1,$b0
+ str r14, [sp,#4*(32+0)] @ save out
+ vmov $b2,$b0
+.Loop_neon_enter:
+ ldr @t[3], [sp,#4*(15)]
+ mov @x[4],@x[4],ror#19 @ twist b[0..3]
+ vadd.i32 $d1,$d0,$t0 @ counter+1
+ ldr @x[12],[sp,#4*(12)] @ modulo-scheduled load
+ mov @x[5],@x[5],ror#19
+ vmov $c1,$c0
+ ldr @t[2], [sp,#4*(13)]
+ mov @x[6],@x[6],ror#19
+ vmov $c2,$c0
+ ldr @x[14],[sp,#4*(14)]
+ mov @x[7],@x[7],ror#19
+ vadd.i32 $d2,$d1,$t0 @ counter+2
+ add @x[12],@x[12],#3 @ counter+3
+ mov @t[3],@t[3],ror#8 @ twist d[0..3]
+ mov @x[12],@x[12],ror#8
+ mov @t[2],@t[2],ror#8
+ mov @x[14],@x[14],ror#8
+ str @t[3], [sp,#4*(16+15)]
+ mov @t[3],#10
+ b .Loop_neon
+
+.align 4
+.Loop_neon:
+ subs @t[3],@t[3],#1
+___
+ my @thread0=&NEONROUND($a0,$b0,$c0,$d0,$t0,0);
+ my @thread1=&NEONROUND($a1,$b1,$c1,$d1,$t1,0);
+ my @thread2=&NEONROUND($a2,$b2,$c2,$d2,$t2,0);
+ my @thread3=&ROUND(0,4,8,12);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+
+ @thread0=&NEONROUND($a0,$b0,$c0,$d0,$t0,1);
+ @thread1=&NEONROUND($a1,$b1,$c1,$d1,$t1,1);
+ @thread2=&NEONROUND($a2,$b2,$c2,$d2,$t2,1);
+ @thread3=&ROUND(0,5,10,15);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+$code.=<<___;
+ bne .Loop_neon
+
+ add @t[3],sp,#32
+ vld1.32 {$t0-$t1},[sp] @ load key material
+ vld1.32 {$t2-$t3},[@t[3]]
+
+ ldr @t[3],[sp,#4*(32+2)] @ load len
+
+ str @t[0], [sp,#4*(16+8)] @ modulo-scheduled store
+ str @t[1], [sp,#4*(16+9)]
+ str @x[12],[sp,#4*(16+12)]
+ str @t[2], [sp,#4*(16+13)]
+ str @x[14],[sp,#4*(16+14)]
+
+ @ at this point we have first half of 512-bit result in
+ @ @x[0-7] and second half at sp+4*(16+8)
+
+ ldr r12,[sp,#4*(32+1)] @ load inp
+ ldr r14,[sp,#4*(32+0)] @ load out
+
+ vadd.i32 $a0,$a0,$t0 @ accumulate key material
+ vadd.i32 $a1,$a1,$t0
+ vadd.i32 $a2,$a2,$t0
+ vldr $t0#lo,[sp,#4*(16+0)] @ one
+
+ vadd.i32 $b0,$b0,$t1
+ vadd.i32 $b1,$b1,$t1
+ vadd.i32 $b2,$b2,$t1
+ vldr $t1#lo,[sp,#4*(16+2)] @ two
+
+ vadd.i32 $c0,$c0,$t2
+ vadd.i32 $c1,$c1,$t2
+ vadd.i32 $c2,$c2,$t2
+ vadd.i32 $d1#lo,$d1#lo,$t0#lo @ counter+1
+ vadd.i32 $d2#lo,$d2#lo,$t1#lo @ counter+2
+
+ vadd.i32 $d0,$d0,$t3
+ vadd.i32 $d1,$d1,$t3
+ vadd.i32 $d2,$d2,$t3
+
+ cmp @t[3],#64*4
+ blo .Ltail_neon
+
+ vld1.8 {$t0-$t1},[r12]! @ load input
+ mov @t[3],sp
+ vld1.8 {$t2-$t3},[r12]!
+ veor $a0,$a0,$t0 @ xor with input
+ veor $b0,$b0,$t1
+ vld1.8 {$t0-$t1},[r12]!
+ veor $c0,$c0,$t2
+ veor $d0,$d0,$t3
+ vld1.8 {$t2-$t3},[r12]!
+
+ veor $a1,$a1,$t0
+ vst1.8 {$a0-$b0},[r14]! @ store output
+ veor $b1,$b1,$t1
+ vld1.8 {$t0-$t1},[r12]!
+ veor $c1,$c1,$t2
+ vst1.8 {$c0-$d0},[r14]!
+ veor $d1,$d1,$t3
+ vld1.8 {$t2-$t3},[r12]!
+
+ veor $a2,$a2,$t0
+ vld1.32 {$a0-$b0},[@t[3]]! @ load for next iteration
+ veor $t0#hi,$t0#hi,$t0#hi
+ vldr $t0#lo,[sp,#4*(16+4)] @ four
+ veor $b2,$b2,$t1
+ vld1.32 {$c0-$d0},[@t[3]]
+ veor $c2,$c2,$t2
+ vst1.8 {$a1-$b1},[r14]!
+ veor $d2,$d2,$t3
+ vst1.8 {$c1-$d1},[r14]!
+
+ vadd.i32 $d0#lo,$d0#lo,$t0#lo @ next counter value
+ vldr $t0#lo,[sp,#4*(16+0)] @ one
+
+ ldmia sp,{@t[0]-@t[3]} @ load key material
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ ldr @t[0],[r12],#16 @ load input
+ vst1.8 {$a2-$b2},[r14]!
+ add @x[1],@x[1],@t[1]
+ ldr @t[1],[r12,#-12]
+ vst1.8 {$c2-$d2},[r14]!
+ add @x[2],@x[2],@t[2]
+ ldr @t[2],[r12,#-8]
+ add @x[3],@x[3],@t[3]
+ ldr @t[3],[r12,#-4]
+# ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+# endif
+ eor @x[0],@x[0],@t[0] @ xor with input
+ add @t[0],sp,#4*(4)
+ eor @x[1],@x[1],@t[1]
+ str @x[0],[r14],#16 @ store output
+ eor @x[2],@x[2],@t[2]
+ str @x[1],[r14,#-12]
+ eor @x[3],@x[3],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[2],[r14,#-8]
+ str @x[3],[r14,#-4]
+
+ add @x[4],@t[0],@x[4],ror#13 @ accumulate key material
+ ldr @t[0],[r12],#16 @ load input
+ add @x[5],@t[1],@x[5],ror#13
+ ldr @t[1],[r12,#-12]
+ add @x[6],@t[2],@x[6],ror#13
+ ldr @t[2],[r12,#-8]
+ add @x[7],@t[3],@x[7],ror#13
+ ldr @t[3],[r12,#-4]
+# ifdef __ARMEB__
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+ eor @x[4],@x[4],@t[0]
+ add @t[0],sp,#4*(8)
+ eor @x[5],@x[5],@t[1]
+ str @x[4],[r14],#16 @ store output
+ eor @x[6],@x[6],@t[2]
+ str @x[5],[r14,#-12]
+ eor @x[7],@x[7],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[6],[r14,#-8]
+ add @x[0],sp,#4*(16+8)
+ str @x[7],[r14,#-4]
+
+ ldmia @x[0],{@x[0]-@x[7]} @ load second half
+
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ ldr @t[0],[r12],#16 @ load input
+ add @x[1],@x[1],@t[1]
+ ldr @t[1],[r12,#-12]
+# ifdef __thumb2__
+ it hi
+# endif
+ strhi @t[2],[sp,#4*(16+10)] @ copy "@x[10]" while at it
+ add @x[2],@x[2],@t[2]
+ ldr @t[2],[r12,#-8]
+# ifdef __thumb2__
+ it hi
+# endif
+ strhi @t[3],[sp,#4*(16+11)] @ copy "@x[11]" while at it
+ add @x[3],@x[3],@t[3]
+ ldr @t[3],[r12,#-4]
+# ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+# endif
+ eor @x[0],@x[0],@t[0]
+ add @t[0],sp,#4*(12)
+ eor @x[1],@x[1],@t[1]
+ str @x[0],[r14],#16 @ store output
+ eor @x[2],@x[2],@t[2]
+ str @x[1],[r14,#-12]
+ eor @x[3],@x[3],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+ str @x[2],[r14,#-8]
+ str @x[3],[r14,#-4]
+
+ add @x[4],@t[0],@x[4],ror#24 @ accumulate key material
+ add @t[0],@t[0],#4 @ next counter value
+ add @x[5],@t[1],@x[5],ror#24
+ str @t[0],[sp,#4*(12)] @ save next counter value
+ ldr @t[0],[r12],#16 @ load input
+ add @x[6],@t[2],@x[6],ror#24
+ add @x[4],@x[4],#3 @ counter+3
+ ldr @t[1],[r12,#-12]
+ add @x[7],@t[3],@x[7],ror#24
+ ldr @t[2],[r12,#-8]
+ ldr @t[3],[r12,#-4]
+# ifdef __ARMEB__
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+ eor @x[4],@x[4],@t[0]
+# ifdef __thumb2__
+ it hi
+# endif
+ ldrhi @t[0],[sp,#4*(32+2)] @ re-load len
+ eor @x[5],@x[5],@t[1]
+ eor @x[6],@x[6],@t[2]
+ str @x[4],[r14],#16 @ store output
+ eor @x[7],@x[7],@t[3]
+ str @x[5],[r14,#-12]
+ sub @t[3],@t[0],#64*4 @ len-=64*4
+ str @x[6],[r14,#-8]
+ str @x[7],[r14,#-4]
+ bhi .Loop_neon_outer
+
+ b .Ldone_neon
+
+.align 4
+.Lbreak_neon:
+ @ harmonize NEON and integer-only stack frames: load data
+ @ from NEON frame, but save to integer-only one; distance
+ @ between the two is 4*(32+4+16-32)=4*(20).
+
+ str @t[3], [sp,#4*(20+32+2)] @ save len
+ add @t[3],sp,#4*(32+4)
+ str r12, [sp,#4*(20+32+1)] @ save inp
+ str r14, [sp,#4*(20+32+0)] @ save out
+
+ ldr @x[12],[sp,#4*(16+10)]
+ ldr @x[14],[sp,#4*(16+11)]
+ vldmia @t[3],{d8-d15} @ fulfill ABI requirement
+ str @x[12],[sp,#4*(20+16+10)] @ copy "@x[10]"
+ str @x[14],[sp,#4*(20+16+11)] @ copy "@x[11]"
+
+ ldr @t[3], [sp,#4*(15)]
+ mov @x[4],@x[4],ror#19 @ twist b[0..3]
+ ldr @x[12],[sp,#4*(12)] @ modulo-scheduled load
+ mov @x[5],@x[5],ror#19
+ ldr @t[2], [sp,#4*(13)]
+ mov @x[6],@x[6],ror#19
+ ldr @x[14],[sp,#4*(14)]
+ mov @x[7],@x[7],ror#19
+ mov @t[3],@t[3],ror#8 @ twist d[0..3]
+ mov @x[12],@x[12],ror#8
+ mov @t[2],@t[2],ror#8
+ mov @x[14],@x[14],ror#8
+ str @t[3], [sp,#4*(20+16+15)]
+ add @t[3],sp,#4*(20)
+ vst1.32 {$a0-$b0},[@t[3]]! @ copy key
+ add sp,sp,#4*(20) @ switch frame
+ vst1.32 {$c0-$d0},[@t[3]]
+ mov @t[3],#10
+ b .Loop @ go integer-only
+
+.align 4
+.Ltail_neon:
+ cmp @t[3],#64*3
+ bhs .L192_or_more_neon
+ cmp @t[3],#64*2
+ bhs .L128_or_more_neon
+ cmp @t[3],#64*1
+ bhs .L64_or_more_neon
+
+ add @t[0],sp,#4*(8)
+ vst1.8 {$a0-$b0},[sp]
+ add @t[2],sp,#4*(0)
+ vst1.8 {$c0-$d0},[@t[0]]
+ b .Loop_tail_neon
+
+.align 4
+.L64_or_more_neon:
+ vld1.8 {$t0-$t1},[r12]!
+ vld1.8 {$t2-$t3},[r12]!
+ veor $a0,$a0,$t0
+ veor $b0,$b0,$t1
+ veor $c0,$c0,$t2
+ veor $d0,$d0,$t3
+ vst1.8 {$a0-$b0},[r14]!
+ vst1.8 {$c0-$d0},[r14]!
+
+ beq .Ldone_neon
+
+ add @t[0],sp,#4*(8)
+ vst1.8 {$a1-$b1},[sp]
+ add @t[2],sp,#4*(0)
+ vst1.8 {$c1-$d1},[@t[0]]
+ sub @t[3],@t[3],#64*1 @ len-=64*1
+ b .Loop_tail_neon
+
+.align 4
+.L128_or_more_neon:
+ vld1.8 {$t0-$t1},[r12]!
+ vld1.8 {$t2-$t3},[r12]!
+ veor $a0,$a0,$t0
+ veor $b0,$b0,$t1
+ vld1.8 {$t0-$t1},[r12]!
+ veor $c0,$c0,$t2
+ veor $d0,$d0,$t3
+ vld1.8 {$t2-$t3},[r12]!
+
+ veor $a1,$a1,$t0
+ veor $b1,$b1,$t1
+ vst1.8 {$a0-$b0},[r14]!
+ veor $c1,$c1,$t2
+ vst1.8 {$c0-$d0},[r14]!
+ veor $d1,$d1,$t3
+ vst1.8 {$a1-$b1},[r14]!
+ vst1.8 {$c1-$d1},[r14]!
+
+ beq .Ldone_neon
+
+ add @t[0],sp,#4*(8)
+ vst1.8 {$a2-$b2},[sp]
+ add @t[2],sp,#4*(0)
+ vst1.8 {$c2-$d2},[@t[0]]
+ sub @t[3],@t[3],#64*2 @ len-=64*2
+ b .Loop_tail_neon
+
+.align 4
+.L192_or_more_neon:
+ vld1.8 {$t0-$t1},[r12]!
+ vld1.8 {$t2-$t3},[r12]!
+ veor $a0,$a0,$t0
+ veor $b0,$b0,$t1
+ vld1.8 {$t0-$t1},[r12]!
+ veor $c0,$c0,$t2
+ veor $d0,$d0,$t3
+ vld1.8 {$t2-$t3},[r12]!
+
+ veor $a1,$a1,$t0
+ veor $b1,$b1,$t1
+ vld1.8 {$t0-$t1},[r12]!
+ veor $c1,$c1,$t2
+ vst1.8 {$a0-$b0},[r14]!
+ veor $d1,$d1,$t3
+ vld1.8 {$t2-$t3},[r12]!
+
+ veor $a2,$a2,$t0
+ vst1.8 {$c0-$d0},[r14]!
+ veor $b2,$b2,$t1
+ vst1.8 {$a1-$b1},[r14]!
+ veor $c2,$c2,$t2
+ vst1.8 {$c1-$d1},[r14]!
+ veor $d2,$d2,$t3
+ vst1.8 {$a2-$b2},[r14]!
+ vst1.8 {$c2-$d2},[r14]!
+
+ beq .Ldone_neon
+
+ ldmia sp,{@t[0]-@t[3]} @ load key material
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ add @t[0],sp,#4*(4)
+ add @x[1],@x[1],@t[1]
+ add @x[2],@x[2],@t[2]
+ add @x[3],@x[3],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+
+ add @x[4],@t[0],@x[4],ror#13 @ accumulate key material
+ add @t[0],sp,#4*(8)
+ add @x[5],@t[1],@x[5],ror#13
+ add @x[6],@t[2],@x[6],ror#13
+ add @x[7],@t[3],@x[7],ror#13
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+# ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+ stmia sp,{@x[0]-@x[7]}
+ add @x[0],sp,#4*(16+8)
+
+ ldmia @x[0],{@x[0]-@x[7]} @ load second half
+
+ add @x[0],@x[0],@t[0] @ accumulate key material
+ add @t[0],sp,#4*(12)
+ add @x[1],@x[1],@t[1]
+ add @x[2],@x[2],@t[2]
+ add @x[3],@x[3],@t[3]
+ ldmia @t[0],{@t[0]-@t[3]} @ load key material
+
+ add @x[4],@t[0],@x[4],ror#24 @ accumulate key material
+ add @t[0],sp,#4*(8)
+ add @x[5],@t[1],@x[5],ror#24
+ add @x[4],@x[4],#3 @ counter+3
+ add @x[6],@t[2],@x[6],ror#24
+ add @x[7],@t[3],@x[7],ror#24
+ ldr @t[3],[sp,#4*(32+2)] @ re-load len
+# ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[1],@x[1]
+ rev @x[2],@x[2]
+ rev @x[3],@x[3]
+ rev @x[4],@x[4]
+ rev @x[5],@x[5]
+ rev @x[6],@x[6]
+ rev @x[7],@x[7]
+# endif
+ stmia @t[0],{@x[0]-@x[7]}
+ add @t[2],sp,#4*(0)
+ sub @t[3],@t[3],#64*3 @ len-=64*3
+
+.Loop_tail_neon:
+ ldrb @t[0],[@t[2]],#1 @ read buffer on stack
+ ldrb @t[1],[r12],#1 @ read input
+ subs @t[3],@t[3],#1
+ eor @t[0],@t[0],@t[1]
+ strb @t[0],[r14],#1 @ store output
+ bne .Loop_tail_neon
+
+.Ldone_neon:
+ add sp,sp,#4*(32+4)
+ vldmia sp,{d8-d15}
+ add sp,sp,#4*(16+3)
+ ldmia sp!,{r4-r11,pc}
+.size ChaCha20_neon,.-ChaCha20_neon
+# ifndef __KERNEL__
+.comm OPENSSL_armcap_P,4,4
+# endif
+#endif
+___
+}}}
+
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/@/ and !/^$/);
+ print;
+}
+close SELF;
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo;
+
+ print $_,"\n";
+}
+close STDOUT;
new file mode 100644
@@ -0,0 +1,1163 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# June 2015
+#
+# ChaCha20 for ARMv8.
+#
+# Performance in cycles per byte out of large buffer.
+#
+# IALU/gcc-4.9 3xNEON+1xIALU 6xNEON+2xIALU(*)
+#
+# Apple A7 5.50/+49% 3.33 1.70
+# Cortex-A53 8.40/+80% 4.72 4.72(**)
+# Cortex-A57 8.06/+43% 4.90 4.43(***)
+# Denver 4.50/+82% 2.63 2.67(**)
+# X-Gene 9.50/+46% 8.82 8.89(**)
+# Mongoose 8.00/+44% 3.64 3.25(***)
+# Kryo 8.17/+50% 4.83 4.65(***)
+#
+# (*) since no non-Apple processor exhibits significantly better
+# performance, the code path is #ifdef __APPLE__-ed;
+# (**) it's expected that doubling interleave factor doesn't help
+# all processors, only those with higher NEON latency and
+# higher instruction issue rate;
+# (***) expected improvement was actually higher;
+
+$flavour=shift;
+if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
+else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+
+if ($flavour && $flavour ne "void") {
+ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+ ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+ ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+ die "can't locate arm-xlate.pl";
+
+ open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+ open STDOUT,">$output";
+}
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+my ($out,$inp,$len,$key,$ctr) = map("x$_",(0..4));
+
+my @x=map("x$_",(5..17,19..21));
+my @d=map("x$_",(22..28,30));
+
+sub ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+
+ (
+ "&add_32 (@x[$a0],@x[$a0],@x[$b0])",
+ "&add_32 (@x[$a1],@x[$a1],@x[$b1])",
+ "&add_32 (@x[$a2],@x[$a2],@x[$b2])",
+ "&add_32 (@x[$a3],@x[$a3],@x[$b3])",
+ "&eor_32 (@x[$d0],@x[$d0],@x[$a0])",
+ "&eor_32 (@x[$d1],@x[$d1],@x[$a1])",
+ "&eor_32 (@x[$d2],@x[$d2],@x[$a2])",
+ "&eor_32 (@x[$d3],@x[$d3],@x[$a3])",
+ "&ror_32 (@x[$d0],@x[$d0],16)",
+ "&ror_32 (@x[$d1],@x[$d1],16)",
+ "&ror_32 (@x[$d2],@x[$d2],16)",
+ "&ror_32 (@x[$d3],@x[$d3],16)",
+
+ "&add_32 (@x[$c0],@x[$c0],@x[$d0])",
+ "&add_32 (@x[$c1],@x[$c1],@x[$d1])",
+ "&add_32 (@x[$c2],@x[$c2],@x[$d2])",
+ "&add_32 (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor_32 (@x[$b0],@x[$b0],@x[$c0])",
+ "&eor_32 (@x[$b1],@x[$b1],@x[$c1])",
+ "&eor_32 (@x[$b2],@x[$b2],@x[$c2])",
+ "&eor_32 (@x[$b3],@x[$b3],@x[$c3])",
+ "&ror_32 (@x[$b0],@x[$b0],20)",
+ "&ror_32 (@x[$b1],@x[$b1],20)",
+ "&ror_32 (@x[$b2],@x[$b2],20)",
+ "&ror_32 (@x[$b3],@x[$b3],20)",
+
+ "&add_32 (@x[$a0],@x[$a0],@x[$b0])",
+ "&add_32 (@x[$a1],@x[$a1],@x[$b1])",
+ "&add_32 (@x[$a2],@x[$a2],@x[$b2])",
+ "&add_32 (@x[$a3],@x[$a3],@x[$b3])",
+ "&eor_32 (@x[$d0],@x[$d0],@x[$a0])",
+ "&eor_32 (@x[$d1],@x[$d1],@x[$a1])",
+ "&eor_32 (@x[$d2],@x[$d2],@x[$a2])",
+ "&eor_32 (@x[$d3],@x[$d3],@x[$a3])",
+ "&ror_32 (@x[$d0],@x[$d0],24)",
+ "&ror_32 (@x[$d1],@x[$d1],24)",
+ "&ror_32 (@x[$d2],@x[$d2],24)",
+ "&ror_32 (@x[$d3],@x[$d3],24)",
+
+ "&add_32 (@x[$c0],@x[$c0],@x[$d0])",
+ "&add_32 (@x[$c1],@x[$c1],@x[$d1])",
+ "&add_32 (@x[$c2],@x[$c2],@x[$d2])",
+ "&add_32 (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor_32 (@x[$b0],@x[$b0],@x[$c0])",
+ "&eor_32 (@x[$b1],@x[$b1],@x[$c1])",
+ "&eor_32 (@x[$b2],@x[$b2],@x[$c2])",
+ "&eor_32 (@x[$b3],@x[$b3],@x[$c3])",
+ "&ror_32 (@x[$b0],@x[$b0],25)",
+ "&ror_32 (@x[$b1],@x[$b1],25)",
+ "&ror_32 (@x[$b2],@x[$b2],25)",
+ "&ror_32 (@x[$b3],@x[$b3],25)"
+ );
+}
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+.extern OPENSSL_armcap_P
+#else
+# define ChaCha20_ctr32 chacha20_arm
+# define ChaCha20_neon chacha20_neon
+#endif
+
+.text
+
+.align 5
+.Lsigma:
+.quad 0x3320646e61707865,0x6b20657479622d32 // endian-neutral
+.Lone:
+.long 1,0,0,0
+#ifndef __KERNEL__
+.LOPENSSL_armcap_P:
+# ifdef __ILP32__
+.long OPENSSL_armcap_P-.
+# else
+.quad OPENSSL_armcap_P-.
+# endif
+#endif
+
+.globl ChaCha20_ctr32
+.type ChaCha20_ctr32,%function
+.align 5
+ChaCha20_ctr32:
+ cbz $len,.Labort
+#ifndef __KERNEL__
+ adr @x[0],.LOPENSSL_armcap_P
+ cmp $len,#192
+ b.lo .Lshort
+# ifdef __ILP32__
+ ldrsw @x[1],[@x[0]]
+# else
+ ldr @x[1],[@x[0]]
+# endif
+ ldr w17,[@x[1],@x[0]]
+ tst w17,#ARMV7_NEON
+ b.ne ChaCha20_neon
+
+.Lshort:
+#endif
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+ sub sp,sp,#64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ldp @d[6],@d[7],[$ctr] // load counter
+#ifdef __AARCH64EB__
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+#endif
+
+.Loop_outer:
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ mov.32 @x[6],@d[3]
+ lsr @x[7],@d[3],#32
+ mov.32 @x[8],@d[4]
+ lsr @x[9],@d[4],#32
+ mov.32 @x[10],@d[5]
+ lsr @x[11],@d[5],#32
+ mov.32 @x[12],@d[6]
+ lsr @x[13],@d[6],#32
+ mov.32 @x[14],@d[7]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#10
+ subs $len,$len,#64
+.Loop:
+ sub $ctr,$ctr,#1
+___
+ foreach (&ROUND(0, 4, 8,12)) { eval; }
+ foreach (&ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+ cbnz $ctr,.Loop
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add @x[1],@x[1],@d[0],lsr#32
+ add.32 @x[2],@x[2],@d[1]
+ add @x[3],@x[3],@d[1],lsr#32
+ add.32 @x[4],@x[4],@d[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add.32 @x[6],@x[6],@d[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add @x[15],@x[15],@d[7],lsr#32
+
+ b.lo .Ltail
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#1 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+
+ b.hi .Loop_outer
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+.Labort:
+ ret
+
+.align 4
+.Ltail:
+ add $len,$len,#64
+.Less_than_64:
+ sub $out,$out,#1
+ add $inp,$inp,$len
+ add $out,$out,$len
+ add $ctr,sp,$len
+ neg $len,$len
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+#ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ stp @x[0],@x[2],[sp,#0]
+ stp @x[4],@x[6],[sp,#16]
+ stp @x[8],@x[10],[sp,#32]
+ stp @x[12],@x[14],[sp,#48]
+
+.Loop_tail:
+ ldrb w10,[$inp,$len]
+ ldrb w11,[$ctr,$len]
+ add $len,$len,#1
+ eor w10,w10,w11
+ strb w10,[$out,$len]
+ cbnz $len,.Loop_tail
+
+ stp xzr,xzr,[sp,#0]
+ stp xzr,xzr,[sp,#16]
+ stp xzr,xzr,[sp,#32]
+ stp xzr,xzr,[sp,#48]
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ ret
+.size ChaCha20_ctr32,.-ChaCha20_ctr32
+___
+
+{{{
+my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,$T0,$T1,$T2,$T3) =
+ map("v$_.4s",(0..7,16..23));
+my (@K)=map("v$_.4s",(24..30));
+my $ONE="v31.4s";
+
+sub NEONROUND {
+my $odd = pop;
+my ($a,$b,$c,$d,$t)=@_;
+
+ (
+ "&add ('$a','$a','$b')",
+ "&eor ('$d','$d','$a')",
+ "&rev32_16 ('$d','$d')", # vrot ($d,16)
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',20)",
+ "&sli ('$b','$t',12)",
+
+ "&add ('$a','$a','$b')",
+ "&eor ('$t','$d','$a')",
+ "&ushr ('$d','$t',24)",
+ "&sli ('$d','$t',8)",
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',25)",
+ "&sli ('$b','$t',7)",
+
+ "&ext ('$c','$c','$c',8)",
+ "&ext ('$d','$d','$d',$odd?4:12)",
+ "&ext ('$b','$b','$b',$odd?12:4)"
+ );
+}
+
+$code.=<<___;
+#if !defined(__KERNEL__) || defined(CONFIG_KERNEL_MODE_NEON)
+#ifdef __KERNEL__
+.globl ChaCha20_neon
+.type ChaCha20_neon,%function
+#endif
+.type ChaCha20_neon,%function
+.align 5
+ChaCha20_neon:
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+#ifdef __APPLE__
+ cmp $len,#512
+ b.hs .L512_or_more_neon
+#endif
+
+ sub sp,sp,#64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ld1 {@K[0]},[@x[0]],#16
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ld1 {@K[1],@K[2]},[$key]
+ ldp @d[6],@d[7],[$ctr] // load counter
+ ld1 {@K[3]},[$ctr]
+ ld1 {$ONE},[@x[0]]
+#ifdef __AARCH64EB__
+ rev64 @K[0],@K[0]
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+#endif
+ add @K[3],@K[3],$ONE // += 1
+ add @K[4],@K[3],$ONE
+ add @K[5],@K[4],$ONE
+ shl $ONE,$ONE,#2 // 1 -> 4
+
+.Loop_outer_neon:
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ mov $A0,@K[0]
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ mov $A1,@K[0]
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ mov $A2,@K[0]
+ mov.32 @x[6],@d[3]
+ mov $B0,@K[1]
+ lsr @x[7],@d[3],#32
+ mov $B1,@K[1]
+ mov.32 @x[8],@d[4]
+ mov $B2,@K[1]
+ lsr @x[9],@d[4],#32
+ mov $D0,@K[3]
+ mov.32 @x[10],@d[5]
+ mov $D1,@K[4]
+ lsr @x[11],@d[5],#32
+ mov $D2,@K[5]
+ mov.32 @x[12],@d[6]
+ mov $C0,@K[2]
+ lsr @x[13],@d[6],#32
+ mov $C1,@K[2]
+ mov.32 @x[14],@d[7]
+ mov $C2,@K[2]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#10
+ subs $len,$len,#256
+.Loop_neon:
+ sub $ctr,$ctr,#1
+___
+ my @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ my @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ my @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ my @thread3=&ROUND(0,4,8,12);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&ROUND(0,5,10,15);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add $A0,$A0,@K[0]
+ add @x[1],@x[1],@d[0],lsr#32
+ add $A1,$A1,@K[0]
+ add.32 @x[2],@x[2],@d[1]
+ add $A2,$A2,@K[0]
+ add @x[3],@x[3],@d[1],lsr#32
+ add $C0,$C0,@K[2]
+ add.32 @x[4],@x[4],@d[2]
+ add $C1,$C1,@K[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add $C2,$C2,@K[2]
+ add.32 @x[6],@x[6],@d[3]
+ add $D0,$D0,@K[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add $D1,$D1,@K[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add $D2,$D2,@K[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add $B0,$B0,@K[1]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add $B1,$B1,@K[1]
+ add @x[15],@x[15],@d[7],lsr#32
+ add $B2,$B2,@K[1]
+
+ b.lo .Ltail_neon
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor $A0,$A0,$T0
+ eor @x[10],@x[10],@x[11]
+ eor $B0,$B0,$T1
+ eor @x[12],@x[12],@x[13]
+ eor $C0,$C0,$T2
+ eor @x[14],@x[14],@x[15]
+ eor $D0,$D0,$T3
+ ld1.8 {$T0-$T3},[$inp],#64
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#4 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ add @K[3],@K[3],$ONE // += 4
+ stp @x[8],@x[10],[$out,#32]
+ add @K[4],@K[4],$ONE
+ stp @x[12],@x[14],[$out,#48]
+ add @K[5],@K[5],$ONE
+ add $out,$out,#64
+
+ st1.8 {$A0-$D0},[$out],#64
+ ld1.8 {$A0-$D0},[$inp],#64
+
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+
+ eor $A2,$A2,$A0
+ eor $B2,$B2,$B0
+ eor $C2,$C2,$C0
+ eor $D2,$D2,$D0
+ st1.8 {$A2-$D2},[$out],#64
+
+ b.hi .Loop_outer_neon
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ ret
+
+.Ltail_neon:
+ add $len,$len,#256
+ cmp $len,#64
+ b.lo .Less_than_64
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#4 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+ cmp $len,#64
+ b.lo .Less_than_128
+
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor $A0,$A0,$T0
+ eor $B0,$B0,$T1
+ eor $C0,$C0,$T2
+ eor $D0,$D0,$T3
+ st1.8 {$A0-$D0},[$out],#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+ cmp $len,#64
+ b.lo .Less_than_192
+
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+
+ st1.8 {$A2-$D2},[sp]
+ b .Last_neon
+
+.Less_than_128:
+ st1.8 {$A0-$D0},[sp]
+ b .Last_neon
+.Less_than_192:
+ st1.8 {$A1-$D1},[sp]
+ b .Last_neon
+
+.align 4
+.Last_neon:
+ sub $out,$out,#1
+ add $inp,$inp,$len
+ add $out,$out,$len
+ add $ctr,sp,$len
+ neg $len,$len
+
+.Loop_tail_neon:
+ ldrb w10,[$inp,$len]
+ ldrb w11,[$ctr,$len]
+ add $len,$len,#1
+ eor w10,w10,w11
+ strb w10,[$out,$len]
+ cbnz $len,.Loop_tail_neon
+
+ stp xzr,xzr,[sp,#0]
+ stp xzr,xzr,[sp,#16]
+ stp xzr,xzr,[sp,#32]
+ stp xzr,xzr,[sp,#48]
+
+.Ldone_neon:
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ ret
+.size ChaCha20_neon,.-ChaCha20_neon
+___
+{
+my ($T0,$T1,$T2,$T3,$T4,$T5)=@K;
+my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,
+ $A3,$B3,$C3,$D3,$A4,$B4,$C4,$D4,$A5,$B5,$C5,$D5) = map("v$_.4s",(0..23));
+
+$code.=<<___;
+#ifdef __APPLE__
+.type ChaCha20_512_neon,%function
+.align 5
+ChaCha20_512_neon:
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+
+.L512_or_more_neon:
+ sub sp,sp,#128+64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ld1 {@K[0]},[@x[0]],#16
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ld1 {@K[1],@K[2]},[$key]
+ ldp @d[6],@d[7],[$ctr] // load counter
+ ld1 {@K[3]},[$ctr]
+ ld1 {$ONE},[@x[0]]
+# ifdef __AARCH64EB__
+ rev64 @K[0],@K[0]
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+# endif
+ add @K[3],@K[3],$ONE // += 1
+ stp @K[0],@K[1],[sp,#0] // off-load key block, invariant part
+ add @K[3],@K[3],$ONE // not typo
+ str @K[2],[sp,#32]
+ add @K[4],@K[3],$ONE
+ add @K[5],@K[4],$ONE
+ add @K[6],@K[5],$ONE
+ shl $ONE,$ONE,#2 // 1 -> 4
+
+ stp d8,d9,[sp,#128+0] // meet ABI requirements
+ stp d10,d11,[sp,#128+16]
+ stp d12,d13,[sp,#128+32]
+ stp d14,d15,[sp,#128+48]
+
+ sub $len,$len,#512 // not typo
+
+.Loop_outer_512_neon:
+ mov $A0,@K[0]
+ mov $A1,@K[0]
+ mov $A2,@K[0]
+ mov $A3,@K[0]
+ mov $A4,@K[0]
+ mov $A5,@K[0]
+ mov $B0,@K[1]
+ mov.32 @x[0],@d[0] // unpack key block
+ mov $B1,@K[1]
+ lsr @x[1],@d[0],#32
+ mov $B2,@K[1]
+ mov.32 @x[2],@d[1]
+ mov $B3,@K[1]
+ lsr @x[3],@d[1],#32
+ mov $B4,@K[1]
+ mov.32 @x[4],@d[2]
+ mov $B5,@K[1]
+ lsr @x[5],@d[2],#32
+ mov $D0,@K[3]
+ mov.32 @x[6],@d[3]
+ mov $D1,@K[4]
+ lsr @x[7],@d[3],#32
+ mov $D2,@K[5]
+ mov.32 @x[8],@d[4]
+ mov $D3,@K[6]
+ lsr @x[9],@d[4],#32
+ mov $C0,@K[2]
+ mov.32 @x[10],@d[5]
+ mov $C1,@K[2]
+ lsr @x[11],@d[5],#32
+ add $D4,$D0,$ONE // +4
+ mov.32 @x[12],@d[6]
+ add $D5,$D1,$ONE // +4
+ lsr @x[13],@d[6],#32
+ mov $C2,@K[2]
+ mov.32 @x[14],@d[7]
+ mov $C3,@K[2]
+ lsr @x[15],@d[7],#32
+ mov $C4,@K[2]
+ stp @K[3],@K[4],[sp,#48] // off-load key block, variable part
+ mov $C5,@K[2]
+ str @K[5],[sp,#80]
+
+ mov $ctr,#5
+ subs $len,$len,#512
+.Loop_upper_neon:
+ sub $ctr,$ctr,#1
+___
+ my @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ my @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ my @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ my @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,0);
+ my @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,0);
+ my @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,0);
+ my @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+ my $diff = ($#thread0+1)*6 - $#thread67 - 1;
+ my $i = 0;
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,1);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,1);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,1);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_upper_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add @x[1],@x[1],@d[0],lsr#32
+ add.32 @x[2],@x[2],@d[1]
+ add @x[3],@x[3],@d[1],lsr#32
+ add.32 @x[4],@x[4],@d[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add.32 @x[6],@x[6],@d[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add @x[15],@x[15],@d[7],lsr#32
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+# ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+# endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#1 // increment counter
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ stp @x[4],@x[6],[$out,#16]
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ stp @x[8],@x[10],[$out,#32]
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ mov.32 @x[6],@d[3]
+ lsr @x[7],@d[3],#32
+ mov.32 @x[8],@d[4]
+ lsr @x[9],@d[4],#32
+ mov.32 @x[10],@d[5]
+ lsr @x[11],@d[5],#32
+ mov.32 @x[12],@d[6]
+ lsr @x[13],@d[6],#32
+ mov.32 @x[14],@d[7]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#5
+.Loop_lower_neon:
+ sub $ctr,$ctr,#1
+___
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,0);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,0);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,0);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,1);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,1);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,1);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_lower_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ ldp @K[0],@K[1],[sp,#0]
+ add @x[1],@x[1],@d[0],lsr#32
+ ldp @K[2],@K[3],[sp,#32]
+ add.32 @x[2],@x[2],@d[1]
+ ldp @K[4],@K[5],[sp,#64]
+ add @x[3],@x[3],@d[1],lsr#32
+ add $A0,$A0,@K[0]
+ add.32 @x[4],@x[4],@d[2]
+ add $A1,$A1,@K[0]
+ add @x[5],@x[5],@d[2],lsr#32
+ add $A2,$A2,@K[0]
+ add.32 @x[6],@x[6],@d[3]
+ add $A3,$A3,@K[0]
+ add @x[7],@x[7],@d[3],lsr#32
+ add $A4,$A4,@K[0]
+ add.32 @x[8],@x[8],@d[4]
+ add $A5,$A5,@K[0]
+ add @x[9],@x[9],@d[4],lsr#32
+ add $C0,$C0,@K[2]
+ add.32 @x[10],@x[10],@d[5]
+ add $C1,$C1,@K[2]
+ add @x[11],@x[11],@d[5],lsr#32
+ add $C2,$C2,@K[2]
+ add.32 @x[12],@x[12],@d[6]
+ add $C3,$C3,@K[2]
+ add @x[13],@x[13],@d[6],lsr#32
+ add $C4,$C4,@K[2]
+ add.32 @x[14],@x[14],@d[7]
+ add $C5,$C5,@K[2]
+ add @x[15],@x[15],@d[7],lsr#32
+ add $D4,$D4,$ONE // +4
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add $D5,$D5,$ONE // +4
+ add @x[2],@x[2],@x[3],lsl#32
+ add $D0,$D0,@K[3]
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add $D1,$D1,@K[4]
+ add @x[4],@x[4],@x[5],lsl#32
+ add $D2,$D2,@K[5]
+ add @x[6],@x[6],@x[7],lsl#32
+ add $D3,$D3,@K[6]
+ ldp @x[5],@x[7],[$inp,#16]
+ add $D4,$D4,@K[3]
+ add @x[8],@x[8],@x[9],lsl#32
+ add $D5,$D5,@K[4]
+ add @x[10],@x[10],@x[11],lsl#32
+ add $B0,$B0,@K[1]
+ ldp @x[9],@x[11],[$inp,#32]
+ add $B1,$B1,@K[1]
+ add @x[12],@x[12],@x[13],lsl#32
+ add $B2,$B2,@K[1]
+ add @x[14],@x[14],@x[15],lsl#32
+ add $B3,$B3,@K[1]
+ ldp @x[13],@x[15],[$inp,#48]
+ add $B4,$B4,@K[1]
+ add $inp,$inp,#64
+ add $B5,$B5,@K[1]
+
+# ifdef __AARCH64EB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+# endif
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor $A0,$A0,$T0
+ eor @x[10],@x[10],@x[11]
+ eor $B0,$B0,$T1
+ eor @x[12],@x[12],@x[13]
+ eor $C0,$C0,$T2
+ eor @x[14],@x[14],@x[15]
+ eor $D0,$D0,$T3
+ ld1.8 {$T0-$T3},[$inp],#64
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#7 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ st1.8 {$A0-$D0},[$out],#64
+
+ ld1.8 {$A0-$D0},[$inp],#64
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+
+ ld1.8 {$A1-$D1},[$inp],#64
+ eor $A2,$A2,$A0
+ ldp @K[0],@K[1],[sp,#0]
+ eor $B2,$B2,$B0
+ ldp @K[2],@K[3],[sp,#32]
+ eor $C2,$C2,$C0
+ eor $D2,$D2,$D0
+ st1.8 {$A2-$D2},[$out],#64
+
+ ld1.8 {$A2-$D2},[$inp],#64
+ eor $A3,$A3,$A1
+ eor $B3,$B3,$B1
+ eor $C3,$C3,$C1
+ eor $D3,$D3,$D1
+ st1.8 {$A3-$D3},[$out],#64
+
+ ld1.8 {$A3-$D3},[$inp],#64
+ eor $A4,$A4,$A2
+ eor $B4,$B4,$B2
+ eor $C4,$C4,$C2
+ eor $D4,$D4,$D2
+ st1.8 {$A4-$D4},[$out],#64
+
+ shl $A0,$ONE,#1 // 4 -> 8
+ eor $A5,$A5,$A3
+ eor $B5,$B5,$B3
+ eor $C5,$C5,$C3
+ eor $D5,$D5,$D3
+ st1.8 {$A5-$D5},[$out],#64
+
+ add @K[3],@K[3],$A0 // += 8
+ add @K[4],@K[4],$A0
+ add @K[5],@K[5],$A0
+ add @K[6],@K[6],$A0
+
+ b.hs .Loop_outer_512_neon
+
+ adds $len,$len,#512
+ ushr $A0,$ONE,#2 // 4 -> 1
+
+ ldp d8,d9,[sp,#128+0] // meet ABI requirements
+ ldp d10,d11,[sp,#128+16]
+ ldp d12,d13,[sp,#128+32]
+ ldp d14,d15,[sp,#128+48]
+
+ stp @K[0],$ONE,[sp,#0] // wipe off-load area
+ stp @K[0],$ONE,[sp,#32]
+ stp @K[0],$ONE,[sp,#64]
+
+ b.eq .Ldone_512_neon
+
+ cmp $len,#192
+ sub @K[3],@K[3],$A0 // -= 1
+ sub @K[4],@K[4],$A0
+ sub @K[5],@K[5],$A0
+ add sp,sp,#128
+ b.hs .Loop_outer_neon
+
+ eor @K[1],@K[1],@K[1]
+ eor @K[2],@K[2],@K[2]
+ eor @K[3],@K[3],@K[3]
+ eor @K[4],@K[4],@K[4]
+ eor @K[5],@K[5],@K[5]
+ eor @K[6],@K[6],@K[6]
+ b .Loop_outer
+
+.Ldone_512_neon:
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#128+64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ ret
+.size ChaCha20_512_neon,.-ChaCha20_512_neon
+#endif
+#endif
+___
+}
+}}}
+
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/\/\// and !/^$/);
+ print;
+}
+close SELF;
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ (s/\b([a-z]+)\.32\b/$1/ and (s/x([0-9]+)/w$1/g or 1)) or
+ (m/\b(eor|ext|mov)\b/ and (s/\.4s/\.16b/g or 1)) or
+ (s/\b((?:ld|st)1)\.8\b/$1/ and (s/\.4s/\.16b/g or 1)) or
+ (m/\b(ld|st)[rp]\b/ and (s/v([0-9]+)\.4s/q$1/g or 1)) or
+ (s/\brev32\.16\b/rev32/ and (s/\.4s/\.8h/g or 1));
+
+ print $_,"\n";
+}
+close STDOUT; # flush
new file mode 100644
@@ -0,0 +1,461 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Google, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Design notes:
+ *
+ * 16 registers would be needed to hold the state matrix, but only 14 are
+ * available because 'sp' and 'pc' cannot be used. So we spill the elements
+ * (x8, x9) to the stack and swap them out with (x10, x11). This adds one
+ * 'ldrd' and one 'strd' instruction per round.
+ *
+ * All rotates are performed using the implicit rotate operand accepted by the
+ * 'add' and 'eor' instructions. This is faster than using explicit rotate
+ * instructions. To make this work, we allow the values in the second and last
+ * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the
+ * wrong rotation amount. The rotation amount is then fixed up just in time
+ * when the values are used. 'brot' is the number of bits the values in row 'b'
+ * need to be rotated right to arrive at the correct values, and 'drot'
+ * similarly for row 'd'. (brot, drot) start out as (0, 0) but we make it such
+ * that they end up as (25, 24) after every round.
+ */
+
+ // ChaCha state registers
+ X0 .req r0
+ X1 .req r1
+ X2 .req r2
+ X3 .req r3
+ X4 .req r4
+ X5 .req r5
+ X6 .req r6
+ X7 .req r7
+ X8_X10 .req r8 // shared by x8 and x10
+ X9_X11 .req r9 // shared by x9 and x11
+ X12 .req r10
+ X13 .req r11
+ X14 .req r12
+ X15 .req r14
+
+.Lexpand_32byte_k:
+ // "expand 32-byte k"
+ .word 0x61707865, 0x3320646e, 0x79622d32, 0x6b206574
+
+#ifdef __thumb2__
+# define adrl adr
+#endif
+
+.macro __rev out, in, t0, t1, t2
+.if __LINUX_ARM_ARCH__ >= 6
+ rev \out, \in
+.else
+ lsl \t0, \in, #24
+ and \t1, \in, #0xff00
+ and \t2, \in, #0xff0000
+ orr \out, \t0, \in, lsr #24
+ orr \out, \out, \t1, lsl #8
+ orr \out, \out, \t2, lsr #8
+.endif
+.endm
+
+.macro _le32_bswap x, t0, t1, t2
+#ifdef __ARMEB__
+ __rev \x, \x, \t0, \t1, \t2
+#endif
+.endm
+
+.macro _le32_bswap_4x a, b, c, d, t0, t1, t2
+ _le32_bswap \a, \t0, \t1, \t2
+ _le32_bswap \b, \t0, \t1, \t2
+ _le32_bswap \c, \t0, \t1, \t2
+ _le32_bswap \d, \t0, \t1, \t2
+.endm
+
+.macro __ldrd a, b, src, offset
+#if __LINUX_ARM_ARCH__ >= 6
+ ldrd \a, \b, [\src, #\offset]
+#else
+ ldr \a, [\src, #\offset]
+ ldr \b, [\src, #\offset + 4]
+#endif
+.endm
+
+.macro __strd a, b, dst, offset
+#if __LINUX_ARM_ARCH__ >= 6
+ strd \a, \b, [\dst, #\offset]
+#else
+ str \a, [\dst, #\offset]
+ str \b, [\dst, #\offset + 4]
+#endif
+.endm
+
+.macro _halfround a1, b1, c1, d1, a2, b2, c2, d2
+
+ // a += b; d ^= a; d = rol(d, 16);
+ add \a1, \a1, \b1, ror #brot
+ add \a2, \a2, \b2, ror #brot
+ eor \d1, \a1, \d1, ror #drot
+ eor \d2, \a2, \d2, ror #drot
+ // drot == 32 - 16 == 16
+
+ // c += d; b ^= c; b = rol(b, 12);
+ add \c1, \c1, \d1, ror #16
+ add \c2, \c2, \d2, ror #16
+ eor \b1, \c1, \b1, ror #brot
+ eor \b2, \c2, \b2, ror #brot
+ // brot == 32 - 12 == 20
+
+ // a += b; d ^= a; d = rol(d, 8);
+ add \a1, \a1, \b1, ror #20
+ add \a2, \a2, \b2, ror #20
+ eor \d1, \a1, \d1, ror #16
+ eor \d2, \a2, \d2, ror #16
+ // drot == 32 - 8 == 24
+
+ // c += d; b ^= c; b = rol(b, 7);
+ add \c1, \c1, \d1, ror #24
+ add \c2, \c2, \d2, ror #24
+ eor \b1, \c1, \b1, ror #20
+ eor \b2, \c2, \b2, ror #20
+ // brot == 32 - 7 == 25
+.endm
+
+.macro _doubleround
+
+ // column round
+
+ // quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13)
+ _halfround X0, X4, X8_X10, X12, X1, X5, X9_X11, X13
+
+ // save (x8, x9); restore (x10, x11)
+ __strd X8_X10, X9_X11, sp, 0
+ __ldrd X8_X10, X9_X11, sp, 8
+
+ // quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15)
+ _halfround X2, X6, X8_X10, X14, X3, X7, X9_X11, X15
+
+ .set brot, 25
+ .set drot, 24
+
+ // diagonal round
+
+ // quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12)
+ _halfround X0, X5, X8_X10, X15, X1, X6, X9_X11, X12
+
+ // save (x10, x11); restore (x8, x9)
+ __strd X8_X10, X9_X11, sp, 8
+ __ldrd X8_X10, X9_X11, sp, 0
+
+ // quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14)
+ _halfround X2, X7, X8_X10, X13, X3, X4, X9_X11, X14
+.endm
+
+.macro _chacha_permute nrounds
+ .set brot, 0
+ .set drot, 0
+ .rept \nrounds / 2
+ _doubleround
+ .endr
+.endm
+
+.macro _chacha nrounds
+
+.Lnext_block\@:
+ // Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN
+ // Registers contain x0-x9,x12-x15.
+
+ // Do the core ChaCha permutation to update x0-x15.
+ _chacha_permute \nrounds
+
+ add sp, #8
+ // Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN
+ // Registers contain x0-x9,x12-x15.
+ // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+ // Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15).
+ push {X8_X10, X9_X11, X12, X13, X14, X15}
+
+ // Load (OUT, IN, LEN).
+ ldr r14, [sp, #96]
+ ldr r12, [sp, #100]
+ ldr r11, [sp, #104]
+
+ orr r10, r14, r12
+
+ // Use slow path if fewer than 64 bytes remain.
+ cmp r11, #64
+ blt .Lxor_slowpath\@
+
+ // Use slow path if IN and/or OUT isn't 4-byte aligned. Needed even on
+ // ARMv6+, since ldmia and stmia (used below) still require alignment.
+ tst r10, #3
+ bne .Lxor_slowpath\@
+
+ // Fast path: XOR 64 bytes of aligned data.
+
+ // Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
+ // Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT.
+ // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+ // x0-x3
+ __ldrd r8, r9, sp, 32
+ __ldrd r10, r11, sp, 40
+ add X0, X0, r8
+ add X1, X1, r9
+ add X2, X2, r10
+ add X3, X3, r11
+ _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10
+ ldmia r12!, {r8-r11}
+ eor X0, X0, r8
+ eor X1, X1, r9
+ eor X2, X2, r10
+ eor X3, X3, r11
+ stmia r14!, {X0-X3}
+
+ // x4-x7
+ __ldrd r8, r9, sp, 48
+ __ldrd r10, r11, sp, 56
+ add X4, r8, X4, ror #brot
+ add X5, r9, X5, ror #brot
+ ldmia r12!, {X0-X3}
+ add X6, r10, X6, ror #brot
+ add X7, r11, X7, ror #brot
+ _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10
+ eor X4, X4, X0
+ eor X5, X5, X1
+ eor X6, X6, X2
+ eor X7, X7, X3
+ stmia r14!, {X4-X7}
+
+ // x8-x15
+ pop {r0-r7} // (x8-x9,x12-x15,x10-x11)
+ __ldrd r8, r9, sp, 32
+ __ldrd r10, r11, sp, 40
+ add r0, r0, r8 // x8
+ add r1, r1, r9 // x9
+ add r6, r6, r10 // x10
+ add r7, r7, r11 // x11
+ _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10
+ ldmia r12!, {r8-r11}
+ eor r0, r0, r8 // x8
+ eor r1, r1, r9 // x9
+ eor r6, r6, r10 // x10
+ eor r7, r7, r11 // x11
+ stmia r14!, {r0,r1,r6,r7}
+ ldmia r12!, {r0,r1,r6,r7}
+ __ldrd r8, r9, sp, 48
+ __ldrd r10, r11, sp, 56
+ add r2, r8, r2, ror #drot // x12
+ add r3, r9, r3, ror #drot // x13
+ add r4, r10, r4, ror #drot // x14
+ add r5, r11, r5, ror #drot // x15
+ _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11
+ ldr r9, [sp, #72] // load LEN
+ eor r2, r2, r0 // x12
+ eor r3, r3, r1 // x13
+ eor r4, r4, r6 // x14
+ eor r5, r5, r7 // x15
+ subs r9, #64 // decrement and check LEN
+ stmia r14!, {r2-r5}
+
+ beq .Ldone\@
+
+.Lprepare_for_next_block\@:
+
+ // Stack: x0-x15 OUT IN LEN
+
+ // Increment block counter (x12)
+ add r8, #1
+
+ // Store updated (OUT, IN, LEN)
+ str r14, [sp, #64]
+ str r12, [sp, #68]
+ str r9, [sp, #72]
+
+ mov r14, sp
+
+ // Store updated block counter (x12)
+ str r8, [sp, #48]
+
+ sub sp, #16
+
+ // Reload state and do next block
+ ldmia r14!, {r0-r11} // load x0-x11
+ __strd r10, r11, sp, 8 // store x10-x11 before state
+ ldmia r14, {r10-r12,r14} // load x12-x15
+ b .Lnext_block\@
+
+.Lxor_slowpath\@:
+ // Slow path: < 64 bytes remaining, or unaligned input or output buffer.
+ // We handle it by storing the 64 bytes of keystream to the stack, then
+ // XOR-ing the needed portion with the data.
+
+ // Allocate keystream buffer
+ sub sp, #64
+ mov r14, sp
+
+ // Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
+ // Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0.
+ // x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+ // Save keystream for x0-x3
+ __ldrd r8, r9, sp, 96
+ __ldrd r10, r11, sp, 104
+ add X0, X0, r8
+ add X1, X1, r9
+ add X2, X2, r10
+ add X3, X3, r11
+ _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10
+ stmia r14!, {X0-X3}
+
+ // Save keystream for x4-x7
+ __ldrd r8, r9, sp, 112
+ __ldrd r10, r11, sp, 120
+ add X4, r8, X4, ror #brot
+ add X5, r9, X5, ror #brot
+ add X6, r10, X6, ror #brot
+ add X7, r11, X7, ror #brot
+ _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10
+ add r8, sp, #64
+ stmia r14!, {X4-X7}
+
+ // Save keystream for x8-x15
+ ldm r8, {r0-r7} // (x8-x9,x12-x15,x10-x11)
+ __ldrd r8, r9, sp, 128
+ __ldrd r10, r11, sp, 136
+ add r0, r0, r8 // x8
+ add r1, r1, r9 // x9
+ add r6, r6, r10 // x10
+ add r7, r7, r11 // x11
+ _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10
+ stmia r14!, {r0,r1,r6,r7}
+ __ldrd r8, r9, sp, 144
+ __ldrd r10, r11, sp, 152
+ add r2, r8, r2, ror #drot // x12
+ add r3, r9, r3, ror #drot // x13
+ add r4, r10, r4, ror #drot // x14
+ add r5, r11, r5, ror #drot // x15
+ _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11
+ stmia r14, {r2-r5}
+
+ // Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
+ // Registers: r8 is block counter, r12 is IN.
+
+ ldr r9, [sp, #168] // LEN
+ ldr r14, [sp, #160] // OUT
+ cmp r9, #64
+ mov r0, sp
+ movle r1, r9
+ movgt r1, #64
+ // r1 is number of bytes to XOR, in range [1, 64]
+
+.if __LINUX_ARM_ARCH__ < 6
+ orr r2, r12, r14
+ tst r2, #3 // IN or OUT misaligned?
+ bne .Lxor_next_byte\@
+.endif
+
+ // XOR a word at a time
+.rept 16
+ subs r1, #4
+ blt .Lxor_words_done\@
+ ldr r2, [r12], #4
+ ldr r3, [r0], #4
+ eor r2, r2, r3
+ str r2, [r14], #4
+.endr
+ b .Lxor_slowpath_done\@
+.Lxor_words_done\@:
+ ands r1, r1, #3
+ beq .Lxor_slowpath_done\@
+
+ // XOR a byte at a time
+.Lxor_next_byte\@:
+ ldrb r2, [r12], #1
+ ldrb r3, [r0], #1
+ eor r2, r2, r3
+ strb r2, [r14], #1
+ subs r1, #1
+ bne .Lxor_next_byte\@
+
+.Lxor_slowpath_done\@:
+ subs r9, #64
+ add sp, #96
+ bgt .Lprepare_for_next_block\@
+
+.Ldone\@:
+.endm // _chacha
+
+/*
+ * void chacha20_arm(u8 *out, const u8 *in, size_t len, const u32 key[8],
+ * const u32 iv[4]);
+ */
+ENTRY(chacha20_arm)
+ cmp r2, #0 // len == 0?
+ reteq lr
+
+ push {r0-r2,r4-r11,lr}
+
+ // Push state x0-x15 onto stack.
+ // Also store an extra copy of x10-x11 just before the state.
+
+ ldr r4, [sp, #48] // iv
+ mov r0, sp
+ sub sp, #80
+
+ // iv: x12-x15
+ ldm r4, {X12,X13,X14,X15}
+ stmdb r0!, {X12,X13,X14,X15}
+
+ // key: x4-x11
+ __ldrd X8_X10, X9_X11, r3, 24
+ __strd X8_X10, X9_X11, sp, 8
+ stmdb r0!, {X8_X10, X9_X11}
+ ldm r3, {X4-X9_X11}
+ stmdb r0!, {X4-X9_X11}
+
+ // constants: x0-x3
+ adrl X3, .Lexpand_32byte_k
+ ldm X3, {X0-X3}
+ __strd X0, X1, sp, 16
+ __strd X2, X3, sp, 24
+
+ _chacha 20
+
+ add sp, #76
+ pop {r4-r11, pc}
+ENDPROC(chacha20_arm)
+
+/*
+ * void hchacha20_arm(const u32 state[16], u32 out[8]);
+ */
+ENTRY(hchacha20_arm)
+ push {r1,r4-r11,lr}
+
+ mov r14, r0
+ ldmia r14!, {r0-r11} // load x0-x11
+ push {r10-r11} // store x10-x11 to stack
+ ldm r14, {r10-r12,r14} // load x12-x15
+ sub sp, #8
+
+ _chacha_permute 20
+
+ // Skip over (unused0-unused1, x10-x11)
+ add sp, #16
+
+ // Fix up rotations of x12-x15
+ ror X12, X12, #drot
+ ror X13, X13, #drot
+ pop {r4} // load 'out'
+ ror X14, X14, #drot
+ ror X15, X15, #drot
+
+ // Store (x0-x3,x12-x15) to 'out'
+ stm r4, {X0,X1,X2,X3,X12,X13,X14,X15}
+
+ pop {r4-r11,pc}
+ENDPROC(hchacha20_arm)
@@ -18,6 +18,8 @@
#if defined(CONFIG_ZINC_ARCH_X86_64)
#include "chacha20-x86_64-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
+#include "chacha20-arm-glue.c"
#else
static bool *const chacha20_nobs[] __initconst = { };
static void __init chacha20_fpu_init(void)
These ARM implementations come from Andy Polyakov's implementation, as well as an ultra-fast unrolled scalar version optimized for ARMv7 from Eric Biggers, which performs well on platforms with slow NEON like Cortex A7 and A5. This commit delivers approximately the same or much better performance than the existing crypto API's code and has been measured to do as such on: - ARM1176JZF-S [ARMv6] - Cortex-A7 [ARMv7] - Cortex-A8 [ARMv7] - Cortex-A9 [ARMv7] - Cortex-A17 [ARMv7] - Cortex-A53 [ARMv8] - Cortex-A55 [ARMv8] - Cortex-A73 [ARMv8] - Cortex-A75 [ARMv8] Interestingly, Andy Polyakov's scalar code is slower than Eric Biggers', but is also significantly shorter. This has the advantage that it does not evict other code from L1 cache -- particularly on ARM11 chips -- and so in certain circumstances it can actually be faster. However, it wasn't found that this had an affect on any code existing in the kernel today. While this is CRYPTOGAMS code, the originating code for this happens to be the same as OpenSSL's commit 9925a82146f2503b4dd11423d0eba649b43450c0 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Co-authored-by: Andy Polyakov <appro@openssl.org> Co-authored-by: Eric Biggers <ebiggers@google.com> Cc: Andy Polyakov <appro@openssl.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Samuel Neves <sneves@dei.uc.pt> Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-crypto@vger.kernel.org --- lib/zinc/Makefile | 4 +- lib/zinc/chacha20/chacha20-arm-glue.c | 98 ++ lib/zinc/chacha20/chacha20-arm.pl | 1227 +++++++++++++++++++++ lib/zinc/chacha20/chacha20-arm64.pl | 1163 +++++++++++++++++++ lib/zinc/chacha20/chacha20-unrolled-arm.S | 461 ++++++++ lib/zinc/chacha20/chacha20.c | 2 + 6 files changed, 2954 insertions(+), 1 deletion(-) create mode 100644 lib/zinc/chacha20/chacha20-arm-glue.c create mode 100644 lib/zinc/chacha20/chacha20-arm.pl create mode 100644 lib/zinc/chacha20/chacha20-arm64.pl create mode 100644 lib/zinc/chacha20/chacha20-unrolled-arm.S