@@ -547,6 +547,17 @@ config RELOCATABLE
setting can still be useful to bootwrappers that need to know the
load address of the kernel (eg. u-boot/mkimage).
+config RANDOMIZE_BASE
+ bool "Randomize the address of the kernel image"
+ depends on (FSL_BOOKE && FLATMEM && PPC32)
+ depends on RELOCATABLE
+ help
+ Randomizes the virtual address at which the kernel image is
+ loaded, as a security feature that deters exploit attempts
+ relying on knowledge of the location of kernel internals.
+
+ If unsure, say Y.
+
config RELOCATABLE_TEST
bool "Test relocatable kernel"
depends on (PPC64 && RELOCATABLE)
@@ -75,7 +75,6 @@
#define MAS2_E 0x00000001
#define MAS2_WIMGE_MASK 0x0000001f
#define MAS2_EPN_MASK(size) (~0 << (size + 10))
-#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
#define MAS3_RPN 0xFFFFF000
#define MAS3_U0 0x00000200
@@ -22,7 +22,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
unsigned long offset = reloc_offset();
/* First zero the BSS */
- memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+ if (kernstart_virt_addr == KERNELBASE)
+ memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
/*
* Identify the CPU type and fix up code sections
@@ -32,5 +33,5 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
apply_feature_fixups();
- return KERNELBASE + offset;
+ return kernstart_virt_addr + offset;
}
@@ -155,23 +155,22 @@ skpinv: addi r6,r6,1 /* Increment */
#if defined(ENTRY_MAPPING_BOOT_SETUP)
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
+/* 6. Setup kernstart_virt_addr mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
- lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, MAS2_M_IF_NEEDED)@h
- ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, MAS2_M_IF_NEEDED)@l
+ lis r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@h
+ ori r6,r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@l
+ and r6,r6,r20
+ ori r6,r6,MAS2_M_IF_NEEDED@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
-/* 7. Jump to KERNELBASE mapping */
- lis r6,(KERNELBASE & ~0xfff)@h
- ori r6,r6,(KERNELBASE & ~0xfff)@l
- rlwinm r7,r25,0,0x03ffffff
- add r6,r7,r6
+/* 7. Jump to kernstart_virt_addr mapping */
+ mr r6,r20
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
@@ -155,6 +155,8 @@ _ENTRY(_start);
*/
_ENTRY(__early_start)
+ LOAD_REG_ADDR_PIC(r20, kernstart_virt_addr)
+ lwz r20,0(r20)
#define ENTRY_MAPPING_BOOT_SETUP
#include "fsl_booke_entry_mapping.S"
@@ -277,8 +279,8 @@ set_ivor:
ori r6, r6, swapper_pg_dir@l
lis r5, abatron_pteptrs@h
ori r5, r5, abatron_pteptrs@l
- lis r4, KERNELBASE@h
- ori r4, r4, KERNELBASE@l
+ lis r3, kernstart_virt_addr@ha
+ lwz r4, kernstart_virt_addr@l(r3)
stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
stw r6, 0(r5)
@@ -1067,7 +1069,12 @@ __secondary_start:
mr r5,r25 /* phys kernel start */
rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
subf r4,r5,r4 /* memstart_addr - phys kernel start */
- li r5,0 /* no device tree */
+ lis r7,KERNELBASE@h
+ ori r7,r7,KERNELBASE@l
+ cmpw r20,r7 /* if kernstart_virt_addr != KERNELBASE, randomized */
+ beq 2f
+ li r4,0
+2: li r5,0 /* no device tree */
li r6,0 /* not boot cpu */
bl restore_to_as0
@@ -144,10 +144,17 @@ extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
void create_kaslr_tlb_entry(int entry, unsigned long virt, phys_addr_t phys);
void reloc_kernel_entry(void *fdt, int addr);
+extern int is_second_reloc;
#endif
extern void loadcam_entry(unsigned int index);
extern void loadcam_multi(int first_idx, int num, int tmp_idx);
+#ifdef CONFIG_RANDOMIZE_BASE
+void kaslr_early_init(void *dt_ptr, phys_addr_t size);
+#else
+static inline void kaslr_early_init(void *dt_ptr, phys_addr_t size) {}
+#endif
+
struct tlbcam {
u32 MAS0;
u32 MAS1;
@@ -8,6 +8,7 @@ obj-$(CONFIG_40x) += 40x.o
obj-$(CONFIG_44x) += 44x.o
obj-$(CONFIG_PPC_8xx) += 8xx.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke.o
+obj-$(CONFIG_RANDOMIZE_BASE) += kaslr_booke.o
ifdef CONFIG_HUGETLB_PAGE
obj-$(CONFIG_PPC_FSL_BOOK3E) += book3e_hugetlbpage.o
endif
@@ -263,7 +263,8 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
int __initdata is_second_reloc;
notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
{
- unsigned long base = KERNELBASE;
+ unsigned long base = kernstart_virt_addr;
+ phys_addr_t size;
kernstart_addr = start;
if (is_second_reloc) {
@@ -291,7 +292,7 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
start &= ~0x3ffffff;
base &= ~0x3ffffff;
virt_phys_offset = base - start;
- early_get_first_memblock_info(__va(dt_ptr), NULL);
+ early_get_first_memblock_info(__va(dt_ptr), &size);
/*
* We now get the memstart_addr, then we should check if this
* address is the same as what the PAGE_OFFSET map to now. If
@@ -316,6 +317,8 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
/* We should never reach here */
panic("Relocation error");
}
+
+ kaslr_early_init(__va(dt_ptr), size);
}
#endif
#endif
new file mode 100644
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2019 Jason Yan <yanaijie@huawei.com>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/memblock.h>
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+
+static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size,
+ unsigned long kernel_sz)
+{
+ /* return a fixed offset of 64M for now */
+ return SZ_64M;
+}
+
+/*
+ * To see if we need to relocate the kernel to a random offset
+ * void *dt_ptr - address of the device tree
+ * phys_addr_t size - size of the first memory block
+ */
+notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
+{
+ unsigned long tlb_virt;
+ phys_addr_t tlb_phys;
+ unsigned long offset;
+ unsigned long kernel_sz;
+
+ kernel_sz = (unsigned long)_end - (unsigned long)_stext;
+
+ offset = kaslr_choose_location(dt_ptr, size, kernel_sz);
+ if (offset == 0)
+ return;
+
+ kernstart_virt_addr += offset;
+ kernstart_addr += offset;
+
+ is_second_reloc = 1;
+
+ if (offset >= SZ_64M) {
+ tlb_virt = round_down(kernstart_virt_addr, SZ_64M);
+ tlb_phys = round_down(kernstart_addr, SZ_64M);
+
+ /* Create kernel map to relocate in */
+ create_kaslr_tlb_entry(1, tlb_virt, tlb_phys);
+ }
+
+ /* Copy the kernel to it's new location and run */
+ memcpy((void *)kernstart_virt_addr, (void *)_stext, kernel_sz);
+ flush_icache_range(kernstart_virt_addr, kernstart_virt_addr + kernel_sz);
+
+ reloc_kernel_entry(dt_ptr, kernstart_virt_addr);
+}