| Message ID | 20220105180214.2435001-1-keescook@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] iio: addac: Do not reference negative array offsets | expand |
Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Put "iio: addac: ad74413r:" in patch title, maybe? > -----Original Message----- > From: Kees Cook <keescook@chromium.org> > Sent: Wednesday, January 5, 2022 8:02 PM > To: Lars-Peter Clausen <lars@metafoo.de> > Cc: Kees Cook <keescook@chromium.org>; Hennerich, Michael > <Michael.Hennerich@analog.com>; Tanislav, Cosmin > <Cosmin.Tanislav@analog.com>; Jonathan Cameron <jic23@kernel.org>; > linux-iio@vger.kernel.org; Linus Walleij <linus.walleij@linaro.org>; linux- > kernel@vger.kernel.org; linux-hardening@vger.kernel.org > Subject: [PATCH v2] iio: addac: Do not reference negative array offsets > > [External] > > Instead of aiming rx_buf at an invalid array-boundary-crossing location, > just skip the first increment. Fixes this warning seen when building > with -Warray-bounds: > > drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': > drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below > array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] > 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > AD74413R_FRAME_SIZE]; > | > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' > 84 | u8 rx_buf[AD74413R_FRAME_SIZE * > AD74413R_CHANNEL_MAX]; > | ^~~~~~ > > Cc: Lars-Peter Clausen <lars@metafoo.de> > Cc: Michael Hennerich <Michael.Hennerich@analog.com> > Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: linux-iio@vger.kernel.org > Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") > Signed-off-by: Kees Cook <keescook@chromium.org> > --- > v1: > https://urldefense.com/v3/__https://lore.kernel.org/lkml/20211215232321. > 2069314-1- > keescook@chromium.org/__;!!A3Ni8CS0y2Y!vadcwdERjyNVz3vFIp5m5S2ms > oFHro8aKzH9ulwPevCKHpev6D53gibZrv5U9mPHGcoB$ > v2: > - use "xfer" for checking "first through the loop" > --- > drivers/iio/addac/ad74413r.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c > index 5271073bb74e..aba9a643a4ca 100644 > --- a/drivers/iio/addac/ad74413r.c > +++ b/drivers/iio/addac/ad74413r.c > @@ -840,7 +840,7 @@ static int ad74413r_update_scan_mode(struct iio_dev > *indio_dev, > { > struct ad74413r_state *st = iio_priv(indio_dev); > struct spi_transfer *xfer = st->adc_samples_xfer; > - u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > AD74413R_FRAME_SIZE]; > + u8 *rx_buf = st->adc_samples_buf.rx_buf; > u8 *tx_buf = st->adc_samples_tx_buf; > unsigned int channel; > int ret = -EINVAL; > @@ -894,9 +894,10 @@ static int ad74413r_update_scan_mode(struct > iio_dev *indio_dev, > > spi_message_add_tail(xfer, &st->adc_samples_msg); > > - xfer++; > tx_buf += AD74413R_FRAME_SIZE; > - rx_buf += AD74413R_FRAME_SIZE; > + if (xfer != st->adc_samples_xfer) > + rx_buf += AD74413R_FRAME_SIZE; > + xfer++; > } > > xfer->rx_buf = rx_buf; > -- > 2.30.2
On Thu, 6 Jan 2022 06:31:55 +0000 "Tanislav, Cosmin" <Cosmin.Tanislav@analog.com> wrote: > Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> > > Put "iio: addac: ad74413r:" in patch title, maybe? I can fix that up whilst applying. I'll pick this up after rc1 is out. Thanks, Jonathan > > > -----Original Message----- > > From: Kees Cook <keescook@chromium.org> > > Sent: Wednesday, January 5, 2022 8:02 PM > > To: Lars-Peter Clausen <lars@metafoo.de> > > Cc: Kees Cook <keescook@chromium.org>; Hennerich, Michael > > <Michael.Hennerich@analog.com>; Tanislav, Cosmin > > <Cosmin.Tanislav@analog.com>; Jonathan Cameron <jic23@kernel.org>; > > linux-iio@vger.kernel.org; Linus Walleij <linus.walleij@linaro.org>; linux- > > kernel@vger.kernel.org; linux-hardening@vger.kernel.org > > Subject: [PATCH v2] iio: addac: Do not reference negative array offsets > > > > [External] > > > > Instead of aiming rx_buf at an invalid array-boundary-crossing location, > > just skip the first increment. Fixes this warning seen when building > > with -Warray-bounds: > > > > drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': > > drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below > > array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] > > 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > > AD74413R_FRAME_SIZE]; > > | > > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' > > 84 | u8 rx_buf[AD74413R_FRAME_SIZE * > > AD74413R_CHANNEL_MAX]; > > | ^~~~~~ > > > > Cc: Lars-Peter Clausen <lars@metafoo.de> > > Cc: Michael Hennerich <Michael.Hennerich@analog.com> > > Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> > > Cc: Jonathan Cameron <jic23@kernel.org> > > Cc: linux-iio@vger.kernel.org > > Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") > > Signed-off-by: Kees Cook <keescook@chromium.org> > > --- > > v1: > > https://urldefense.com/v3/__https://lore.kernel.org/lkml/20211215232321. > > 2069314-1- > > keescook@chromium.org/__;!!A3Ni8CS0y2Y!vadcwdERjyNVz3vFIp5m5S2ms > > oFHro8aKzH9ulwPevCKHpev6D53gibZrv5U9mPHGcoB$ > > v2: > > - use "xfer" for checking "first through the loop" > > --- > > drivers/iio/addac/ad74413r.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c > > index 5271073bb74e..aba9a643a4ca 100644 > > --- a/drivers/iio/addac/ad74413r.c > > +++ b/drivers/iio/addac/ad74413r.c > > @@ -840,7 +840,7 @@ static int ad74413r_update_scan_mode(struct iio_dev > > *indio_dev, > > { > > struct ad74413r_state *st = iio_priv(indio_dev); > > struct spi_transfer *xfer = st->adc_samples_xfer; > > - u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > > AD74413R_FRAME_SIZE]; > > + u8 *rx_buf = st->adc_samples_buf.rx_buf; > > u8 *tx_buf = st->adc_samples_tx_buf; > > unsigned int channel; > > int ret = -EINVAL; > > @@ -894,9 +894,10 @@ static int ad74413r_update_scan_mode(struct > > iio_dev *indio_dev, > > > > spi_message_add_tail(xfer, &st->adc_samples_msg); > > > > - xfer++; > > tx_buf += AD74413R_FRAME_SIZE; > > - rx_buf += AD74413R_FRAME_SIZE; > > + if (xfer != st->adc_samples_xfer) > > + rx_buf += AD74413R_FRAME_SIZE; > > + xfer++; > > } > > > > xfer->rx_buf = rx_buf; > > -- > > 2.30.2 >
On Sat, 15 Jan 2022 18:12:02 +0000 Jonathan Cameron <jic23@kernel.org> wrote: > On Thu, 6 Jan 2022 06:31:55 +0000 > "Tanislav, Cosmin" <Cosmin.Tanislav@analog.com> wrote: > > > Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> > > > > Put "iio: addac: ad74413r:" in patch title, maybe? > I can fix that up whilst applying. Ah. I see you already sent it again. Thanks as that's even easier. Jonathan > > I'll pick this up after rc1 is out. > > Thanks, > > Jonathan > > > > > > -----Original Message----- > > > From: Kees Cook <keescook@chromium.org> > > > Sent: Wednesday, January 5, 2022 8:02 PM > > > To: Lars-Peter Clausen <lars@metafoo.de> > > > Cc: Kees Cook <keescook@chromium.org>; Hennerich, Michael > > > <Michael.Hennerich@analog.com>; Tanislav, Cosmin > > > <Cosmin.Tanislav@analog.com>; Jonathan Cameron <jic23@kernel.org>; > > > linux-iio@vger.kernel.org; Linus Walleij <linus.walleij@linaro.org>; linux- > > > kernel@vger.kernel.org; linux-hardening@vger.kernel.org > > > Subject: [PATCH v2] iio: addac: Do not reference negative array offsets > > > > > > [External] > > > > > > Instead of aiming rx_buf at an invalid array-boundary-crossing location, > > > just skip the first increment. Fixes this warning seen when building > > > with -Warray-bounds: > > > > > > drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': > > > drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below > > > array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] > > > 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > > > AD74413R_FRAME_SIZE]; > > > | > > > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' > > > 84 | u8 rx_buf[AD74413R_FRAME_SIZE * > > > AD74413R_CHANNEL_MAX]; > > > | ^~~~~~ > > > > > > Cc: Lars-Peter Clausen <lars@metafoo.de> > > > Cc: Michael Hennerich <Michael.Hennerich@analog.com> > > > Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> > > > Cc: Jonathan Cameron <jic23@kernel.org> > > > Cc: linux-iio@vger.kernel.org > > > Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") > > > Signed-off-by: Kees Cook <keescook@chromium.org> > > > --- > > > v1: > > > https://urldefense.com/v3/__https://lore.kernel.org/lkml/20211215232321. > > > 2069314-1- > > > keescook@chromium.org/__;!!A3Ni8CS0y2Y!vadcwdERjyNVz3vFIp5m5S2ms > > > oFHro8aKzH9ulwPevCKHpev6D53gibZrv5U9mPHGcoB$ > > > v2: > > > - use "xfer" for checking "first through the loop" > > > --- > > > drivers/iio/addac/ad74413r.c | 7 ++++--- > > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c > > > index 5271073bb74e..aba9a643a4ca 100644 > > > --- a/drivers/iio/addac/ad74413r.c > > > +++ b/drivers/iio/addac/ad74413r.c > > > @@ -840,7 +840,7 @@ static int ad74413r_update_scan_mode(struct iio_dev > > > *indio_dev, > > > { > > > struct ad74413r_state *st = iio_priv(indio_dev); > > > struct spi_transfer *xfer = st->adc_samples_xfer; > > > - u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * > > > AD74413R_FRAME_SIZE]; > > > + u8 *rx_buf = st->adc_samples_buf.rx_buf; > > > u8 *tx_buf = st->adc_samples_tx_buf; > > > unsigned int channel; > > > int ret = -EINVAL; > > > @@ -894,9 +894,10 @@ static int ad74413r_update_scan_mode(struct > > > iio_dev *indio_dev, > > > > > > spi_message_add_tail(xfer, &st->adc_samples_msg); > > > > > > - xfer++; > > > tx_buf += AD74413R_FRAME_SIZE; > > > - rx_buf += AD74413R_FRAME_SIZE; > > > + if (xfer != st->adc_samples_xfer) > > > + rx_buf += AD74413R_FRAME_SIZE; > > > + xfer++; > > > } > > > > > > xfer->rx_buf = rx_buf; > > > -- > > > 2.30.2 > > >
diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index 5271073bb74e..aba9a643a4ca 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -840,7 +840,7 @@ static int ad74413r_update_scan_mode(struct iio_dev *indio_dev, { struct ad74413r_state *st = iio_priv(indio_dev); struct spi_transfer *xfer = st->adc_samples_xfer; - u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * AD74413R_FRAME_SIZE]; + u8 *rx_buf = st->adc_samples_buf.rx_buf; u8 *tx_buf = st->adc_samples_tx_buf; unsigned int channel; int ret = -EINVAL; @@ -894,9 +894,10 @@ static int ad74413r_update_scan_mode(struct iio_dev *indio_dev, spi_message_add_tail(xfer, &st->adc_samples_msg); - xfer++; tx_buf += AD74413R_FRAME_SIZE; - rx_buf += AD74413R_FRAME_SIZE; + if (xfer != st->adc_samples_xfer) + rx_buf += AD74413R_FRAME_SIZE; + xfer++; } xfer->rx_buf = rx_buf;
Instead of aiming rx_buf at an invalid array-boundary-crossing location, just skip the first increment. Fixes this warning seen when building with -Warray-bounds: drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * AD74413R_FRAME_SIZE]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' 84 | u8 rx_buf[AD74413R_FRAME_SIZE * AD74413R_CHANNEL_MAX]; | ^~~~~~ Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Kees Cook <keescook@chromium.org> --- v1: https://lore.kernel.org/lkml/20211215232321.2069314-1-keescook@chromium.org/ v2: - use "xfer" for checking "first through the loop" --- drivers/iio/addac/ad74413r.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)