diff mbox series

[v2,09/11] arm64: dts: qcom: Add configuration for PM8950 peripheral

Message ID 20221111120156.48040-10-angelogioacchino.delregno@collabora.com (mailing list archive)
State Mainlined
Commit e07f41b0e1db8244867ff363f1d1eceefe8d6ad2
Headers show
Series MSM8956/76 and Sony Xperia X / X Compact support | expand

Commit Message

AngeloGioacchino Del Regno Nov. 11, 2022, 12:01 p.m. UTC 
The PM8950 features integrated peripherals like ADC, GPIO controller,
MPPs, PON keys and others.
Add them to DT files that will be imported on boards having this PMIC
combo (or one of them, anyways).

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/qcom/pm8950.dtsi | 165 +++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8950.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 000000000000..07c3896bd36f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,165 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			vcoin@5 {
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			vph-pwr@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			die-temp@8 {
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-625mv@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-1250mv@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-buf-625mv@c {
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+			};
+
+			ref-gnd@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			ref-vdd@f {
+				reg = <VADC_VDD_VADC>;
+			};
+
+			pa-therm1@11 {
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			case-therm@13 {
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm@32 {
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			pa-therm0@36 {
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+
+			xo-therm-buf@3c {
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8950_gpio: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_gpio 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};