From patchwork Sat Nov 19 20:37:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 13049790 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9BAFBC41535 for ; Sat, 19 Nov 2022 20:39:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234551AbiKSUjg (ORCPT ); Sat, 19 Nov 2022 15:39:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45384 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234857AbiKSUjS (ORCPT ); Sat, 19 Nov 2022 15:39:18 -0500 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6AC9913CC4; Sat, 19 Nov 2022 12:39:16 -0800 (PST) Received: from g550jk.arnhem.chello.nl (unknown [62.108.10.64]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id BD600D0662; Sat, 19 Nov 2022 20:38:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1668890325; bh=ZG0BKb5zKUPc/HbCQ7S54MG6eK2Va0ZZO8hts8PKNeM=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=lJyFOg5BOhQ2/ZpL6ZIE91zLqy2fg9sRcH+dkcYPVo41BS+JkEA2ukw4X2pYV7x3k ryNXaglAJNWdh/kGW2iyzbRy+LvzHLsEXqgxpI2fU3l6OsXZnmIAKxgtzm7eDsKIWo xRu58B0W+/E4dPpA/1qKuuC48HhUqnJiN4e2N5KY= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Sireesh Kodali , Luca Weiss , Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Kees Cook , Tony Luck , "Guilherme G. Piccoli" , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org Subject: [PATCH v2 4/9] arm64: dts: qcom: msm8953: Add device tree for Motorola G5 Plus Date: Sat, 19 Nov 2022 21:37:45 +0100 Message-Id: <20221119203758.888207-5-luca@z3ntu.xyz> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221119203758.888207-1-luca@z3ntu.xyz> References: <20221119203758.888207-1-luca@z3ntu.xyz> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-hardening@vger.kernel.org From: Sireesh Kodali Add device tree for the Motorola G5 Plus (potter) smartphone. This device is based on Snapdragon 625 (msm8953) SoC. Signed-off-by: Sireesh Kodali Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio --- Changes in v2: * address review comments from v1 arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8953-motorola-potter.dts | 305 ++++++++++++++++++ 2 files changed, 306 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6bc1be0d525a..eb3cfbac6b82 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts new file mode 100644 index 000000000000..e890fd53c454 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Sireesh Kodali + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G5 Plus"; + compatible = "motorola,potter", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x46 0x83a0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (2220 * 1920 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + reserved@aefd2000 { + reg = <0x0 0xaefd2000 0x0 0x2e000>; + no-map; + }; + + reserved@eefe4000 { + reg = <0x0 0xeefe4000 0x0 0x1c000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0x80000>; + console-size = <0x40000>; + ftrace-size = <0>; + record-size = <0x3f800>; + pmsg-size = <0x800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset>; + + vdd-supply = <&pm8953_l22>; + vio-supply = <&pm8953_l6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + }; +}; + +&pm8953_resin { + linux,code = ; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <25000>; + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>; + + ts_reset: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +};