| Message ID | 20241001002628.2239032-2-jeffxu@chromium.org (mailing list archive) |
|---|---|
| State | Superseded |
| Commit | 5daace9676c7ae9aac4e53ca3b20c813ecdfeda6 |
| Headers | show |
| Series | update mseal.rst | expand |
Hi Jeff, Sorry for the delay. Thanks for your v2 updates. On 9/30/24 5:26 PM, jeffxu@chromium.org wrote: > From: Jeff Xu <jeffxu@chromium.org> > > Update doc after in-loop change: mprotect/madvise can have > partially updated and munmap is atomic. > > Fix indentation and clarify some sections to improve readability. > > Signed-off-by: Jeff Xu <jeffxu@chromium.org> > Fixes: df2a7df9a9aa ("mm/munmap: replace can_modify_mm with can_modify_vma") > Fixes: 4a2dd02b0916 ("mm/mprotect: replace can_modify_mm with can_modify_vma") > Fixes: 38075679b5f1 ("mm/mremap: replace can_modify_mm with can_modify_vma") > Fixes: 23c57d1fa2b9 ("mseal: replace can_modify_mm_madv with a vma variant") > --- > Documentation/userspace-api/mseal.rst | 304 ++++++++++++-------------- > 1 file changed, 144 insertions(+), 160 deletions(-) > > diff --git a/Documentation/userspace-api/mseal.rst b/Documentation/userspace-api/mseal.rst > index 4132eec995a3..04d34b5adb8f 100644 > --- a/Documentation/userspace-api/mseal.rst > +++ b/Documentation/userspace-api/mseal.rst > @@ -23,177 +23,161 @@ applications can additionally seal security critical data at runtime. > A similar feature already exists in the XNU kernel with the > VM_FLAGS_PERMANENT flag [1] and on OpenBSD with the mimmutable syscall [2]. > > -User API > -======== > -mseal() > ------------ > -The mseal() syscall has the following signature: > - > -``int mseal(void addr, size_t len, unsigned long flags)`` > - > -**addr/len**: virtual memory address range. > - > -The address range set by ``addr``/``len`` must meet: > - - The start address must be in an allocated VMA. > - - The start address must be page aligned. > - - The end address (``addr`` + ``len``) must be in an allocated VMA. > - - no gap (unallocated memory) between start and end address. > - > -The ``len`` will be paged aligned implicitly by the kernel. > - > -**flags**: reserved for future use. > - > -**return values**: > - > -- ``0``: Success. > - > -- ``-EINVAL``: > - - Invalid input ``flags``. > - - The start address (``addr``) is not page aligned. > - - Address range (``addr`` + ``len``) overflow. > - > -- ``-ENOMEM``: > - - The start address (``addr``) is not allocated. > - - The end address (``addr`` + ``len``) is not allocated. > - - A gap (unallocated memory) between start and end address. > - > -- ``-EPERM``: > - - sealing is supported only on 64-bit CPUs, 32-bit is not supported. > - > -- For above error cases, users can expect the given memory range is > - unmodified, i.e. no partial update. > - > -- There might be other internal errors/cases not listed here, e.g. > - error during merging/splitting VMAs, or the process reaching the max > - number of supported VMAs. In those cases, partial updates to the given > - memory range could happen. However, those cases should be rare. > - > -**Blocked operations after sealing**: > - Unmapping, moving to another location, and shrinking the size, > - via munmap() and mremap(), can leave an empty space, therefore > - can be replaced with a VMA with a new set of attributes. > - > - Moving or expanding a different VMA into the current location, > - via mremap(). > - > - Modifying a VMA via mmap(MAP_FIXED). > - > - Size expansion, via mremap(), does not appear to pose any > - specific risks to sealed VMAs. It is included anyway because > - the use case is unclear. In any case, users can rely on > - merging to expand a sealed VMA. > - > - mprotect() and pkey_mprotect(). > - > - Some destructive madvice() behaviors (e.g. MADV_DONTNEED) > - for anonymous memory, when users don't have write permission to the > - memory. Those behaviors can alter region contents by discarding pages, > - effectively a memset(0) for anonymous memory. > - > - Kernel will return -EPERM for blocked operations. > - > - For blocked operations, one can expect the given address is unmodified, > - i.e. no partial update. Note, this is different from existing mm > - system call behaviors, where partial updates are made till an error is > - found and returned to userspace. To give an example: > - > - Assume following code sequence: > - > - - ptr = mmap(null, 8192, PROT_NONE); > - - munmap(ptr + 4096, 4096); > - - ret1 = mprotect(ptr, 8192, PROT_READ); > - - mseal(ptr, 4096); > - - ret2 = mprotect(ptr, 8192, PROT_NONE); > - > - ret1 will be -ENOMEM, the page from ptr is updated to PROT_READ. > - > - ret2 will be -EPERM, the page remains to be PROT_READ. > - > -**Note**: > - > -- mseal() only works on 64-bit CPUs, not 32-bit CPU. > - > -- users can call mseal() multiple times, mseal() on an already sealed memory > - is a no-action (not error). > - > -- munseal() is not supported. > - > -Use cases: > -========== > +SYSCALL > +======= > +mseal syscall signature > +----------------------- > + ``int mseal(void \* addr, size_t len, unsigned long flags)`` > + > + **addr**/**len**: virtual memory address range. > + The address range set by **addr**/**len** must meet: > + - The start address must be in an allocated VMA. > + - The start address must be page aligned. > + - The end address (**addr** + **len**) must be in an allocated VMA. > + - no gap (unallocated memory) between start and end address. > + > + The ``len`` will be paged aligned implicitly by the kernel. > + > + **flags**: reserved for future use. > + > + **Return values**: > + - **0**: Success. > + - **-EINVAL**: > + * Invalid input ``flags``. > + * The start address (``addr``) is not page aligned. > + * Address range (``addr`` + ``len``) overflow. > + - **-ENOMEM**: > + * The start address (``addr``) is not allocated. > + * The end address (``addr`` + ``len``) is not allocated. > + * A gap (unallocated memory) between start and end address. > + - **-EPERM**: > + * sealing is supported only on 64-bit CPUs, 32-bit is not supported. > + > + **Note about error return**: > + - For above error cases, users can expect the given memory range is > + unmodified, i.e. no partial update. > + - There might be other internal errors/cases not listed here, e.g. > + error during merging/splitting VMAs, or the process reaching the max maximum > + number of supported VMAs. In those cases, partial updates to the given > + memory range could happen. However, those cases should be rare. > + > + **Architecture support**: > + mseal only works on 64-bit CPUs, not 32-bit CPUs. > + > + **Idempotent**: > + users can call mseal multiple times. mseal on an already sealed memory > + is a no-action (not error). > + > + **no munseal** > + Once mapping is sealed, it can't be unsealed. kernel should never The kernel > + have munseal, this is consistent with other sealing feature, e.g. > + F_SEAL_SEAL for file. > + > +Blocked mm syscall for sealed mapping > +------------------------------------- > + It might be important to note: **once the mapping is sealed, it will > + stay in the process's memory until the process terminates**. > + > + Example:: > + > + *ptr = mmap(0, 4096, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); > + rc = mseal(ptr, 4096, 0); > + /* munmap will fail */ > + rc = munmap(ptr, 4096); > + assert(rc < 0); > + > + Blocked mm syscall: > + - munmap > + - mmap > + - mremap > + - mprotect and pkey_mprotect > + - some destructive madvise behaviors: MADV_DONTNEED, MADV_FREE, > + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK > + > + The first set of syscall to block is munmap, mremap, mmap. They can syscalls > + either leave an empty space in the address space, therefore allow allowing > + replacement with a new mapping with new set of attributes, or can > + overwrite the existing mapping with another mapping. > + > + mprotect and pkey_mprotect are blocked because they changes the > + protection bits (RWX) of the mapping. > + > + Some destructive madvise behaviors (MADV_DONTNEED, MADV_FREE,> + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK) > + for anonymous memory, when users don't have write permission to the > + memory. Those behaviors can alter region contents by discarding pages, above is not a sentence but I don't know how to fix it. > + effectively a memset(0) for anonymous memory. > + > + Kernel will return -EPERM for blocked syscalls. > + > + When blocked syscall return -EPERM due to sealing, the memory regions may or may not be changed, depends on the syscall being blocked: a blocked syscall returns depending on and split that line into 2 lines. > + - munmap: munmap is atomic. If one of VMAs in the given range is > + sealed, none of VMAs are updated. > + - mprotect, pkey_mprotect, madvise: partial update might happen, e.g. > + when mprotect over multiple VMAs, mprotect might update the beginning > + VMAs before reaching the sealed VMA and return -EPERM. > + - mmap and mremap: undefined behavior. > + > +Use cases > +========= > - glibc: > The dynamic linker, during loading ELF executables, can apply sealing to > - non-writable memory segments. > - > -- Chrome browser: protect some security sensitive data-structures. > + mapping segments. > > -Notes on which memory to seal: > -============================== > +- Chrome browser: protect some security sensitive data structures. > > -It might be important to note that sealing changes the lifetime of a mapping, > -i.e. the sealed mapping won’t be unmapped till the process terminates or the > -exec system call is invoked. Applications can apply sealing to any virtual > -memory region from userspace, but it is crucial to thoroughly analyze the > -mapping's lifetime prior to apply the sealing. > +When not to use mseal > +===================== > +Applications can apply sealing to any virtual memory region from userspace, > +but it is *crucial to thoroughly analyze the mapping's lifetime* prior to > +apply the sealing. This is because the sealed mapping *won’t be unmapped* > +until the process terminates or the exec system call is invoked. > > For example: > + - aio/shm > + aio/shm can call mmap and munmap on behalf of userspace, e.g. > + ksys_shmdt() in shm.c. The lifetimes of those mapping are not tied to > + the lifetime of the process. If those memories are sealed from userspace, > + then munmap will fail, causing leaks in VMA address space during the > + lifetime of the process. > + > + - ptr allocated by malloc (heap) > + Don't use mseal on the memory ptr return from malloc(). > + malloc() is implemented by allocator, e.g. by glibc. Heap manager might > + allocate a ptr from brk or mapping created by mmap. > + If an app calls mseal on a ptr returned from malloc(), this can affect > + the heap manager's ability to manage the mappings; the outcome is > + non-deterministic. > + > + Example:: > + > + ptr = malloc(size); > + /* don't call mseal on ptr return from malloc. */ > + mseal(ptr, size); > + /* free will success, allocator can't shrink heap lower than ptr */ > + free(ptr); > + > +mseal doesn't block > +=================== > +In a nutshell, mseal blocks certain mm syscall from modifying some of VMA's > +attributes, such as protection bits (RWX). Sealed mappings doesn't mean the > +memory is immutable. > > -- aio/shm > - > - aio/shm can call mmap()/munmap() on behalf of userspace, e.g. ksys_shmdt() in > - shm.c. The lifetime of those mapping are not tied to the lifetime of the > - process. If those memories are sealed from userspace, then munmap() will fail, > - causing leaks in VMA address space during the lifetime of the process. > - > -- Brk (heap) > - > - Currently, userspace applications can seal parts of the heap by calling > - malloc() and mseal(). > - let's assume following calls from user space: > - > - - ptr = malloc(size); > - - mprotect(ptr, size, RO); > - - mseal(ptr, size); > - - free(ptr); > - > - Technically, before mseal() is added, the user can change the protection of > - the heap by calling mprotect(RO). As long as the user changes the protection > - back to RW before free(), the memory range can be reused. > - > - Adding mseal() into the picture, however, the heap is then sealed partially, > - the user can still free it, but the memory remains to be RO. If the address > - is re-used by the heap manager for another malloc, the process might crash > - soon after. Therefore, it is important not to apply sealing to any memory > - that might get recycled. > - > - Furthermore, even if the application never calls the free() for the ptr, > - the heap manager may invoke the brk system call to shrink the size of the > - heap. In the kernel, the brk-shrink will call munmap(). Consequently, > - depending on the location of the ptr, the outcome of brk-shrink is > - nondeterministic. > - > - > -Additional notes: > -================= > As Jann Horn pointed out in [3], there are still a few ways to write > -to RO memory, which is, in a way, by design. Those cases are not covered > -by mseal(). If applications want to block such cases, sandbox tools (such as > -seccomp, LSM, etc) might be considered. > +to RO memory, which is, in a way, by design. And those could be blocked > +by different security measures. > > Those cases are: > - > -- Write to read-only memory through /proc/self/mem interface. > -- Write to read-only memory through ptrace (such as PTRACE_POKETEXT). > -- userfaultfd. > + - Write to read-only memory through /proc/self/mem interface (FOLL_FORCE). > + - Write to read-only memory through ptrace (such as PTRACE_POKETEXT). > + - userfaultfd. > > The idea that inspired this patch comes from Stephen Röttger’s work in V8 > CFI [4]. Chrome browser in ChromeOS will be the first user of this API. > > -Reference: > -========== > -[1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 > - > -[2] https://man.openbsd.org/mimmutable.2 > - > -[3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com > - > -[4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc > +Reference > +========= > +- [1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 > +- [2] https://man.openbsd.org/mimmutable.2 > +- [3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com > +- [4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc With those few changes: Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Hi Randy On Thu, Oct 3, 2024 at 3:54 PM Randy Dunlap <rdunlap@infradead.org> wrote: > > Hi Jeff, > > Sorry for the delay. > Thanks for your v2 updates. > I appreciate you spending time proofreading the mseal.rst. > > On 9/30/24 5:26 PM, jeffxu@chromium.org wrote: > > From: Jeff Xu <jeffxu@chromium.org> > > > > Update doc after in-loop change: mprotect/madvise can have > > partially updated and munmap is atomic. > > > > Fix indentation and clarify some sections to improve readability. > > > > Signed-off-by: Jeff Xu <jeffxu@chromium.org> > > Fixes: df2a7df9a9aa ("mm/munmap: replace can_modify_mm with can_modify_vma") > > Fixes: 4a2dd02b0916 ("mm/mprotect: replace can_modify_mm with can_modify_vma") > > Fixes: 38075679b5f1 ("mm/mremap: replace can_modify_mm with can_modify_vma") > > Fixes: 23c57d1fa2b9 ("mseal: replace can_modify_mm_madv with a vma variant") > > --- > > Documentation/userspace-api/mseal.rst | 304 ++++++++++++-------------- > > 1 file changed, 144 insertions(+), 160 deletions(-) > > > > diff --git a/Documentation/userspace-api/mseal.rst b/Documentation/userspace-api/mseal.rst > > index 4132eec995a3..04d34b5adb8f 100644 > > --- a/Documentation/userspace-api/mseal.rst > > +++ b/Documentation/userspace-api/mseal.rst > > @@ -23,177 +23,161 @@ applications can additionally seal security critical data at runtime. > > A similar feature already exists in the XNU kernel with the > > VM_FLAGS_PERMANENT flag [1] and on OpenBSD with the mimmutable syscall [2]. > > > > -User API > > -======== > > -mseal() > > ------------ > > -The mseal() syscall has the following signature: > > - > > -``int mseal(void addr, size_t len, unsigned long flags)`` > > - > > -**addr/len**: virtual memory address range. > > - > > -The address range set by ``addr``/``len`` must meet: > > - - The start address must be in an allocated VMA. > > - - The start address must be page aligned. > > - - The end address (``addr`` + ``len``) must be in an allocated VMA. > > - - no gap (unallocated memory) between start and end address. > > - > > -The ``len`` will be paged aligned implicitly by the kernel. > > - > > -**flags**: reserved for future use. > > - > > -**return values**: > > - > > -- ``0``: Success. > > - > > -- ``-EINVAL``: > > - - Invalid input ``flags``. > > - - The start address (``addr``) is not page aligned. > > - - Address range (``addr`` + ``len``) overflow. > > - > > -- ``-ENOMEM``: > > - - The start address (``addr``) is not allocated. > > - - The end address (``addr`` + ``len``) is not allocated. > > - - A gap (unallocated memory) between start and end address. > > - > > -- ``-EPERM``: > > - - sealing is supported only on 64-bit CPUs, 32-bit is not supported. > > - > > -- For above error cases, users can expect the given memory range is > > - unmodified, i.e. no partial update. > > - > > -- There might be other internal errors/cases not listed here, e.g. > > - error during merging/splitting VMAs, or the process reaching the max > > - number of supported VMAs. In those cases, partial updates to the given > > - memory range could happen. However, those cases should be rare. > > - > > -**Blocked operations after sealing**: > > - Unmapping, moving to another location, and shrinking the size, > > - via munmap() and mremap(), can leave an empty space, therefore > > - can be replaced with a VMA with a new set of attributes. > > - > > - Moving or expanding a different VMA into the current location, > > - via mremap(). > > - > > - Modifying a VMA via mmap(MAP_FIXED). > > - > > - Size expansion, via mremap(), does not appear to pose any > > - specific risks to sealed VMAs. It is included anyway because > > - the use case is unclear. In any case, users can rely on > > - merging to expand a sealed VMA. > > - > > - mprotect() and pkey_mprotect(). > > - > > - Some destructive madvice() behaviors (e.g. MADV_DONTNEED) > > - for anonymous memory, when users don't have write permission to the > > - memory. Those behaviors can alter region contents by discarding pages, > > - effectively a memset(0) for anonymous memory. > > - > > - Kernel will return -EPERM for blocked operations. > > - > > - For blocked operations, one can expect the given address is unmodified, > > - i.e. no partial update. Note, this is different from existing mm > > - system call behaviors, where partial updates are made till an error is > > - found and returned to userspace. To give an example: > > - > > - Assume following code sequence: > > - > > - - ptr = mmap(null, 8192, PROT_NONE); > > - - munmap(ptr + 4096, 4096); > > - - ret1 = mprotect(ptr, 8192, PROT_READ); > > - - mseal(ptr, 4096); > > - - ret2 = mprotect(ptr, 8192, PROT_NONE); > > - > > - ret1 will be -ENOMEM, the page from ptr is updated to PROT_READ. > > - > > - ret2 will be -EPERM, the page remains to be PROT_READ. > > - > > -**Note**: > > - > > -- mseal() only works on 64-bit CPUs, not 32-bit CPU. > > - > > -- users can call mseal() multiple times, mseal() on an already sealed memory > > - is a no-action (not error). > > - > > -- munseal() is not supported. > > - > > -Use cases: > > -========== > > +SYSCALL > > +======= > > +mseal syscall signature > > +----------------------- > > + ``int mseal(void \* addr, size_t len, unsigned long flags)`` > > + > > + **addr**/**len**: virtual memory address range. > > + The address range set by **addr**/**len** must meet: > > + - The start address must be in an allocated VMA. > > + - The start address must be page aligned. > > + - The end address (**addr** + **len**) must be in an allocated VMA. > > + - no gap (unallocated memory) between start and end address. > > + > > + The ``len`` will be paged aligned implicitly by the kernel. > > + > > + **flags**: reserved for future use. > > + > > + **Return values**: > > + - **0**: Success. > > + - **-EINVAL**: > > + * Invalid input ``flags``. > > + * The start address (``addr``) is not page aligned. > > + * Address range (``addr`` + ``len``) overflow. > > + - **-ENOMEM**: > > + * The start address (``addr``) is not allocated. > > + * The end address (``addr`` + ``len``) is not allocated. > > + * A gap (unallocated memory) between start and end address. > > + - **-EPERM**: > > + * sealing is supported only on 64-bit CPUs, 32-bit is not supported. > > + > > + **Note about error return**: > > + - For above error cases, users can expect the given memory range is > > + unmodified, i.e. no partial update. > > + - There might be other internal errors/cases not listed here, e.g. > > + error during merging/splitting VMAs, or the process reaching the max > > maximum fixed. > > > + number of supported VMAs. In those cases, partial updates to the given > > + memory range could happen. However, those cases should be rare. > > + > > + **Architecture support**: > > + mseal only works on 64-bit CPUs, not 32-bit CPUs. > > + > > + **Idempotent**: > > + users can call mseal multiple times. mseal on an already sealed memory > > + is a no-action (not error). > > + > > + **no munseal** > > + Once mapping is sealed, it can't be unsealed. kernel should never > > The kernel Fixed. > > > + have munseal, this is consistent with other sealing feature, e.g. > > + F_SEAL_SEAL for file. > > + > > +Blocked mm syscall for sealed mapping > > +------------------------------------- > > + It might be important to note: **once the mapping is sealed, it will > > + stay in the process's memory until the process terminates**. > > + > > + Example:: > > + > > + *ptr = mmap(0, 4096, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); > > + rc = mseal(ptr, 4096, 0); > > + /* munmap will fail */ > > + rc = munmap(ptr, 4096); > > + assert(rc < 0); > > + > > + Blocked mm syscall: > > + - munmap > > + - mmap > > + - mremap > > + - mprotect and pkey_mprotect > > + - some destructive madvise behaviors: MADV_DONTNEED, MADV_FREE, > > + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK > > + > > + The first set of syscall to block is munmap, mremap, mmap. They can > > syscalls fixed. > > > + either leave an empty space in the address space, therefore allow > > allowing fixed. > > > + replacement with a new mapping with new set of attributes, or can > > + overwrite the existing mapping with another mapping. > > + > > + mprotect and pkey_mprotect are blocked because they changes the > > + protection bits (RWX) of the mapping. > > + > > + Some destructive madvise behaviors (MADV_DONTNEED, MADV_FREE,> + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK) > > + for anonymous memory, when users don't have write permission to the > > + memory. Those behaviors can alter region contents by discarding pages, > > above is not a sentence but I don't know how to fix it. > Would below work ? Certain destructive madvise behaviors, specifically MADV_DONTNEED, MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK, can pose risks when applied to anonymous memory by threads without write permissions. These behaviors have the potential to modify region contents by discarding pages, effectively performing a memset(0) operation on the anonymous memory. > > + effectively a memset(0) for anonymous memory. > > + > > + Kernel will return -EPERM for blocked syscalls. > > + > > + When blocked syscall return -EPERM due to sealing, the memory regions may or may not be changed, depends on the syscall being blocked: > > a blocked syscall returns depending on > > and split that line into 2 lines. fixed. > > > + - munmap: munmap is atomic. If one of VMAs in the given range is > > + sealed, none of VMAs are updated. > > + - mprotect, pkey_mprotect, madvise: partial update might happen, e.g. > > + when mprotect over multiple VMAs, mprotect might update the beginning > > + VMAs before reaching the sealed VMA and return -EPERM. > > + - mmap and mremap: undefined behavior. > > + > > +Use cases > > +========= > > - glibc: > > The dynamic linker, during loading ELF executables, can apply sealing to > > - non-writable memory segments. > > - > > -- Chrome browser: protect some security sensitive data-structures. > > + mapping segments. > > > > -Notes on which memory to seal: > > -============================== > > +- Chrome browser: protect some security sensitive data structures. > > > > -It might be important to note that sealing changes the lifetime of a mapping, > > -i.e. the sealed mapping won’t be unmapped till the process terminates or the > > -exec system call is invoked. Applications can apply sealing to any virtual > > -memory region from userspace, but it is crucial to thoroughly analyze the > > -mapping's lifetime prior to apply the sealing. > > +When not to use mseal > > +===================== > > +Applications can apply sealing to any virtual memory region from userspace, > > +but it is *crucial to thoroughly analyze the mapping's lifetime* prior to > > +apply the sealing. This is because the sealed mapping *won’t be unmapped* > > +until the process terminates or the exec system call is invoked. > > > > For example: > > + - aio/shm > > + aio/shm can call mmap and munmap on behalf of userspace, e.g. > > + ksys_shmdt() in shm.c. The lifetimes of those mapping are not tied to > > + the lifetime of the process. If those memories are sealed from userspace, > > + then munmap will fail, causing leaks in VMA address space during the > > + lifetime of the process. > > + > > + - ptr allocated by malloc (heap) > > + Don't use mseal on the memory ptr return from malloc(). > > + malloc() is implemented by allocator, e.g. by glibc. Heap manager might > > + allocate a ptr from brk or mapping created by mmap. > > + If an app calls mseal on a ptr returned from malloc(), this can affect > > + the heap manager's ability to manage the mappings; the outcome is > > + non-deterministic. > > + > > + Example:: > > + > > + ptr = malloc(size); > > + /* don't call mseal on ptr return from malloc. */ > > + mseal(ptr, size); > > + /* free will success, allocator can't shrink heap lower than ptr */ > > + free(ptr); > > + > > +mseal doesn't block > > +=================== > > +In a nutshell, mseal blocks certain mm syscall from modifying some of VMA's > > +attributes, such as protection bits (RWX). Sealed mappings doesn't mean the > > +memory is immutable. > > > > -- aio/shm > > - > > - aio/shm can call mmap()/munmap() on behalf of userspace, e.g. ksys_shmdt() in > > - shm.c. The lifetime of those mapping are not tied to the lifetime of the > > - process. If those memories are sealed from userspace, then munmap() will fail, > > - causing leaks in VMA address space during the lifetime of the process. > > - > > -- Brk (heap) > > - > > - Currently, userspace applications can seal parts of the heap by calling > > - malloc() and mseal(). > > - let's assume following calls from user space: > > - > > - - ptr = malloc(size); > > - - mprotect(ptr, size, RO); > > - - mseal(ptr, size); > > - - free(ptr); > > - > > - Technically, before mseal() is added, the user can change the protection of > > - the heap by calling mprotect(RO). As long as the user changes the protection > > - back to RW before free(), the memory range can be reused. > > - > > - Adding mseal() into the picture, however, the heap is then sealed partially, > > - the user can still free it, but the memory remains to be RO. If the address > > - is re-used by the heap manager for another malloc, the process might crash > > - soon after. Therefore, it is important not to apply sealing to any memory > > - that might get recycled. > > - > > - Furthermore, even if the application never calls the free() for the ptr, > > - the heap manager may invoke the brk system call to shrink the size of the > > - heap. In the kernel, the brk-shrink will call munmap(). Consequently, > > - depending on the location of the ptr, the outcome of brk-shrink is > > - nondeterministic. > > - > > - > > -Additional notes: > > -================= > > As Jann Horn pointed out in [3], there are still a few ways to write > > -to RO memory, which is, in a way, by design. Those cases are not covered > > -by mseal(). If applications want to block such cases, sandbox tools (such as > > -seccomp, LSM, etc) might be considered. > > +to RO memory, which is, in a way, by design. And those could be blocked > > +by different security measures. > > > > Those cases are: > > - > > -- Write to read-only memory through /proc/self/mem interface. > > -- Write to read-only memory through ptrace (such as PTRACE_POKETEXT). > > -- userfaultfd. > > + - Write to read-only memory through /proc/self/mem interface (FOLL_FORCE). > > + - Write to read-only memory through ptrace (such as PTRACE_POKETEXT). > > + - userfaultfd. > > > > The idea that inspired this patch comes from Stephen Röttger’s work in V8 > > CFI [4]. Chrome browser in ChromeOS will be the first user of this API. > > > > -Reference: > > -========== > > -[1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 > > - > > -[2] https://man.openbsd.org/mimmutable.2 > > - > > -[3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com > > - > > -[4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc > > +Reference > > +========= > > +- [1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 > > +- [2] https://man.openbsd.org/mimmutable.2 > > +- [3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com > > +- [4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc > > With those few changes: > > Reviewed-by: Randy Dunlap <rdunlap@infradead.org> > Thanks! -Jeff > -- > ~Randy
Jeff Xu <jeffxu@chromium.org> wrote: > > > + replacement with a new mapping with new set of attributes, or can > > > + overwrite the existing mapping with another mapping. > > > + > > > + mprotect and pkey_mprotect are blocked because they changes the > > > + protection bits (RWX) of the mapping. > > > + > > > + Some destructive madvise behaviors (MADV_DONTNEED, MADV_FREE,> + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK) > > > + for anonymous memory, when users don't have write permission to the > > > + memory. Those behaviors can alter region contents by discarding pages, > > > > above is not a sentence but I don't know how to fix it. > > > Would below work ? > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > threads without write permissions. These behaviors have the potential > to modify region contents by discarding pages, effectively performing > a memset(0) operation on the anonymous memory. In OpenBSD, mimmutable blocks all those madvise() operations. I don't understand the sentence supplied above. Is it saying that mseal() solves that problem, or that mseal() does not solve that problem. I would hope it solves that problem. But the sentence explains the problem without taking a position on what to do.
On 10/4/24 9:52 AM, Jeff Xu wrote: >> above is not a sentence but I don't know how to fix it. >> > Would below work ? > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > threads without write permissions. These behaviors have the potential > to modify region contents by discarding pages, effectively performing > a memset(0) operation on the anonymous memory. Yes, that works. Or at least it explains the problem, like Theo said. Thanks.
Randy Dunlap <rdunlap@infradead.org> wrote: > On 10/4/24 9:52 AM, Jeff Xu wrote: > >> above is not a sentence but I don't know how to fix it. > >> > > Would below work ? > > > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > > threads without write permissions. These behaviors have the potential > > to modify region contents by discarding pages, effectively performing > > a memset(0) operation on the anonymous memory. > > Yes, that works. > Or at least it explains the problem, like Theo said. In OpenBSD, mimmutable() solves this problem (in later code iterations). In Linux, does mseal() solve the problem or not? The statement doesn't answer this question. It only explains the problem. If it doesn't solve the problem, that's pretty surprising (weaker than mimmutable). During development I wrote a fake little program which placed an 'int = 1' resided into a zone of readonly memory (.data), and then imagined "an attacker gets enough control to perform an madvise(), but only had enough control, and has to return to normal control flow immediately". The madvise() operations was able to trash the int, altering the program's later behaviour. So I researched the matter more, and adapted mimmutable() to block ALL system-call variations similar to 'write to a not-permitted region'. So the question remains: Does mseal() block such a (rare) pattern or not. The sentence doesn't indicate that mseal() has a response to the stated problem.
Hi Theo On Fri, Oct 4, 2024 at 12:11 PM Theo de Raadt <deraadt@openbsd.org> wrote: > > Jeff Xu <jeffxu@chromium.org> wrote: > > > > > + replacement with a new mapping with new set of attributes, or can > > > > + overwrite the existing mapping with another mapping. > > > > + > > > > + mprotect and pkey_mprotect are blocked because they changes the > > > > + protection bits (RWX) of the mapping. > > > > + > > > > + Some destructive madvise behaviors (MADV_DONTNEED, MADV_FREE,> + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK) > > > > + for anonymous memory, when users don't have write permission to the > > > > + memory. Those behaviors can alter region contents by discarding pages, > > > > > > above is not a sentence but I don't know how to fix it. > > > > > Would below work ? > > > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > > threads without write permissions. These behaviors have the potential > > to modify region contents by discarding pages, effectively performing > > a memset(0) operation on the anonymous memory. > > > In OpenBSD, mimmutable blocks all those madvise() operations. > > > I don't understand the sentence supplied above. Is it saying that > mseal() solves that problem, or that mseal() does not solve that > problem. > Yes. The mseal solved the problem, I will modify the sentence to clarify that. thanks > I would hope it solves that problem. But the sentence explains the > problem without taking a position on what to do. >
Hi Randy On Fri, Oct 4, 2024 at 4:52 PM Randy Dunlap <rdunlap@infradead.org> wrote: > > > > On 10/4/24 9:52 AM, Jeff Xu wrote: > >> above is not a sentence but I don't know how to fix it. > >> > > Would below work ? > > > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > > threads without write permissions. These behaviors have the potential > > to modify region contents by discarding pages, effectively performing > > a memset(0) operation on the anonymous memory. > > Yes, that works. > Or at least it explains the problem, like Theo said. > I updated with : Certain destructive madvise behaviors, specifically MADV_DONTNEED, MADV_FREE, MADV_DONTNEED_LOCKED, and MADV_WIPEONFORK, can introduce risks when applied to anonymous memory by threads lacking write permissions. Consequently, these operations are prohibited under such conditions. The aforementioned behaviors have the potential to modify region contents by discarding pages, effectively performing a memset(0) operation on the anonymous memory. Thanks -Jeff > Thanks. > -- > ~Randy
Hi Theo On Fri, Oct 4, 2024 at 6:04 PM Theo de Raadt <deraadt@openbsd.org> wrote: > > Randy Dunlap <rdunlap@infradead.org> wrote: > > > On 10/4/24 9:52 AM, Jeff Xu wrote: > > >> above is not a sentence but I don't know how to fix it. > > >> > > > Would below work ? > > > > > > Certain destructive madvise behaviors, specifically MADV_DONTNEED, > > > MADV_FREE, MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, > > > MADV_WIPEONFORK, can pose risks when applied to anonymous memory by > > > threads without write permissions. These behaviors have the potential > > > to modify region contents by discarding pages, effectively performing > > > a memset(0) operation on the anonymous memory. > > > > Yes, that works. > > Or at least it explains the problem, like Theo said. > > In OpenBSD, mimmutable() solves this problem (in later code iterations). > > In Linux, does mseal() solve the problem or not? The statement doesn't > answer this question. It only explains the problem. > > If it doesn't solve the problem, that's pretty surprising (weaker than > mimmutable). > > During development I wrote a fake little program which placed an 'int = > 1' resided into a zone of readonly memory (.data), and then imagined "an > attacker gets enough control to perform an madvise(), but only had > enough control, and has to return to normal control flow immediately". > The madvise() operations was able to trash the int, altering the > program's later behaviour. So I researched the matter more, and adapted > mimmutable() to block ALL system-call variations similar to 'write to a > not-permitted region'. > > So the question remains: Does mseal() block such a (rare) pattern or not. Apology for delay. Yes, mseal does block such patterns. Thanks -Jeff > The sentence doesn't indicate that mseal() has a response to the stated > problem. >
diff --git a/Documentation/userspace-api/mseal.rst b/Documentation/userspace-api/mseal.rst index 4132eec995a3..04d34b5adb8f 100644 --- a/Documentation/userspace-api/mseal.rst +++ b/Documentation/userspace-api/mseal.rst @@ -23,177 +23,161 @@ applications can additionally seal security critical data at runtime. A similar feature already exists in the XNU kernel with the VM_FLAGS_PERMANENT flag [1] and on OpenBSD with the mimmutable syscall [2]. -User API -======== -mseal() ------------ -The mseal() syscall has the following signature: - -``int mseal(void addr, size_t len, unsigned long flags)`` - -**addr/len**: virtual memory address range. - -The address range set by ``addr``/``len`` must meet: - - The start address must be in an allocated VMA. - - The start address must be page aligned. - - The end address (``addr`` + ``len``) must be in an allocated VMA. - - no gap (unallocated memory) between start and end address. - -The ``len`` will be paged aligned implicitly by the kernel. - -**flags**: reserved for future use. - -**return values**: - -- ``0``: Success. - -- ``-EINVAL``: - - Invalid input ``flags``. - - The start address (``addr``) is not page aligned. - - Address range (``addr`` + ``len``) overflow. - -- ``-ENOMEM``: - - The start address (``addr``) is not allocated. - - The end address (``addr`` + ``len``) is not allocated. - - A gap (unallocated memory) between start and end address. - -- ``-EPERM``: - - sealing is supported only on 64-bit CPUs, 32-bit is not supported. - -- For above error cases, users can expect the given memory range is - unmodified, i.e. no partial update. - -- There might be other internal errors/cases not listed here, e.g. - error during merging/splitting VMAs, or the process reaching the max - number of supported VMAs. In those cases, partial updates to the given - memory range could happen. However, those cases should be rare. - -**Blocked operations after sealing**: - Unmapping, moving to another location, and shrinking the size, - via munmap() and mremap(), can leave an empty space, therefore - can be replaced with a VMA with a new set of attributes. - - Moving or expanding a different VMA into the current location, - via mremap(). - - Modifying a VMA via mmap(MAP_FIXED). - - Size expansion, via mremap(), does not appear to pose any - specific risks to sealed VMAs. It is included anyway because - the use case is unclear. In any case, users can rely on - merging to expand a sealed VMA. - - mprotect() and pkey_mprotect(). - - Some destructive madvice() behaviors (e.g. MADV_DONTNEED) - for anonymous memory, when users don't have write permission to the - memory. Those behaviors can alter region contents by discarding pages, - effectively a memset(0) for anonymous memory. - - Kernel will return -EPERM for blocked operations. - - For blocked operations, one can expect the given address is unmodified, - i.e. no partial update. Note, this is different from existing mm - system call behaviors, where partial updates are made till an error is - found and returned to userspace. To give an example: - - Assume following code sequence: - - - ptr = mmap(null, 8192, PROT_NONE); - - munmap(ptr + 4096, 4096); - - ret1 = mprotect(ptr, 8192, PROT_READ); - - mseal(ptr, 4096); - - ret2 = mprotect(ptr, 8192, PROT_NONE); - - ret1 will be -ENOMEM, the page from ptr is updated to PROT_READ. - - ret2 will be -EPERM, the page remains to be PROT_READ. - -**Note**: - -- mseal() only works on 64-bit CPUs, not 32-bit CPU. - -- users can call mseal() multiple times, mseal() on an already sealed memory - is a no-action (not error). - -- munseal() is not supported. - -Use cases: -========== +SYSCALL +======= +mseal syscall signature +----------------------- + ``int mseal(void \* addr, size_t len, unsigned long flags)`` + + **addr**/**len**: virtual memory address range. + The address range set by **addr**/**len** must meet: + - The start address must be in an allocated VMA. + - The start address must be page aligned. + - The end address (**addr** + **len**) must be in an allocated VMA. + - no gap (unallocated memory) between start and end address. + + The ``len`` will be paged aligned implicitly by the kernel. + + **flags**: reserved for future use. + + **Return values**: + - **0**: Success. + - **-EINVAL**: + * Invalid input ``flags``. + * The start address (``addr``) is not page aligned. + * Address range (``addr`` + ``len``) overflow. + - **-ENOMEM**: + * The start address (``addr``) is not allocated. + * The end address (``addr`` + ``len``) is not allocated. + * A gap (unallocated memory) between start and end address. + - **-EPERM**: + * sealing is supported only on 64-bit CPUs, 32-bit is not supported. + + **Note about error return**: + - For above error cases, users can expect the given memory range is + unmodified, i.e. no partial update. + - There might be other internal errors/cases not listed here, e.g. + error during merging/splitting VMAs, or the process reaching the max + number of supported VMAs. In those cases, partial updates to the given + memory range could happen. However, those cases should be rare. + + **Architecture support**: + mseal only works on 64-bit CPUs, not 32-bit CPUs. + + **Idempotent**: + users can call mseal multiple times. mseal on an already sealed memory + is a no-action (not error). + + **no munseal** + Once mapping is sealed, it can't be unsealed. kernel should never + have munseal, this is consistent with other sealing feature, e.g. + F_SEAL_SEAL for file. + +Blocked mm syscall for sealed mapping +------------------------------------- + It might be important to note: **once the mapping is sealed, it will + stay in the process's memory until the process terminates**. + + Example:: + + *ptr = mmap(0, 4096, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); + rc = mseal(ptr, 4096, 0); + /* munmap will fail */ + rc = munmap(ptr, 4096); + assert(rc < 0); + + Blocked mm syscall: + - munmap + - mmap + - mremap + - mprotect and pkey_mprotect + - some destructive madvise behaviors: MADV_DONTNEED, MADV_FREE, + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK + + The first set of syscall to block is munmap, mremap, mmap. They can + either leave an empty space in the address space, therefore allow + replacement with a new mapping with new set of attributes, or can + overwrite the existing mapping with another mapping. + + mprotect and pkey_mprotect are blocked because they changes the + protection bits (RWX) of the mapping. + + Some destructive madvise behaviors (MADV_DONTNEED, MADV_FREE, + MADV_DONTNEED_LOCKED, MADV_FREE, MADV_DONTFORK, MADV_WIPEONFORK) + for anonymous memory, when users don't have write permission to the + memory. Those behaviors can alter region contents by discarding pages, + effectively a memset(0) for anonymous memory. + + Kernel will return -EPERM for blocked syscalls. + + When blocked syscall return -EPERM due to sealing, the memory regions may or may not be changed, depends on the syscall being blocked: + - munmap: munmap is atomic. If one of VMAs in the given range is + sealed, none of VMAs are updated. + - mprotect, pkey_mprotect, madvise: partial update might happen, e.g. + when mprotect over multiple VMAs, mprotect might update the beginning + VMAs before reaching the sealed VMA and return -EPERM. + - mmap and mremap: undefined behavior. + +Use cases +========= - glibc: The dynamic linker, during loading ELF executables, can apply sealing to - non-writable memory segments. - -- Chrome browser: protect some security sensitive data-structures. + mapping segments. -Notes on which memory to seal: -============================== +- Chrome browser: protect some security sensitive data structures. -It might be important to note that sealing changes the lifetime of a mapping, -i.e. the sealed mapping won’t be unmapped till the process terminates or the -exec system call is invoked. Applications can apply sealing to any virtual -memory region from userspace, but it is crucial to thoroughly analyze the -mapping's lifetime prior to apply the sealing. +When not to use mseal +===================== +Applications can apply sealing to any virtual memory region from userspace, +but it is *crucial to thoroughly analyze the mapping's lifetime* prior to +apply the sealing. This is because the sealed mapping *won’t be unmapped* +until the process terminates or the exec system call is invoked. For example: + - aio/shm + aio/shm can call mmap and munmap on behalf of userspace, e.g. + ksys_shmdt() in shm.c. The lifetimes of those mapping are not tied to + the lifetime of the process. If those memories are sealed from userspace, + then munmap will fail, causing leaks in VMA address space during the + lifetime of the process. + + - ptr allocated by malloc (heap) + Don't use mseal on the memory ptr return from malloc(). + malloc() is implemented by allocator, e.g. by glibc. Heap manager might + allocate a ptr from brk or mapping created by mmap. + If an app calls mseal on a ptr returned from malloc(), this can affect + the heap manager's ability to manage the mappings; the outcome is + non-deterministic. + + Example:: + + ptr = malloc(size); + /* don't call mseal on ptr return from malloc. */ + mseal(ptr, size); + /* free will success, allocator can't shrink heap lower than ptr */ + free(ptr); + +mseal doesn't block +=================== +In a nutshell, mseal blocks certain mm syscall from modifying some of VMA's +attributes, such as protection bits (RWX). Sealed mappings doesn't mean the +memory is immutable. -- aio/shm - - aio/shm can call mmap()/munmap() on behalf of userspace, e.g. ksys_shmdt() in - shm.c. The lifetime of those mapping are not tied to the lifetime of the - process. If those memories are sealed from userspace, then munmap() will fail, - causing leaks in VMA address space during the lifetime of the process. - -- Brk (heap) - - Currently, userspace applications can seal parts of the heap by calling - malloc() and mseal(). - let's assume following calls from user space: - - - ptr = malloc(size); - - mprotect(ptr, size, RO); - - mseal(ptr, size); - - free(ptr); - - Technically, before mseal() is added, the user can change the protection of - the heap by calling mprotect(RO). As long as the user changes the protection - back to RW before free(), the memory range can be reused. - - Adding mseal() into the picture, however, the heap is then sealed partially, - the user can still free it, but the memory remains to be RO. If the address - is re-used by the heap manager for another malloc, the process might crash - soon after. Therefore, it is important not to apply sealing to any memory - that might get recycled. - - Furthermore, even if the application never calls the free() for the ptr, - the heap manager may invoke the brk system call to shrink the size of the - heap. In the kernel, the brk-shrink will call munmap(). Consequently, - depending on the location of the ptr, the outcome of brk-shrink is - nondeterministic. - - -Additional notes: -================= As Jann Horn pointed out in [3], there are still a few ways to write -to RO memory, which is, in a way, by design. Those cases are not covered -by mseal(). If applications want to block such cases, sandbox tools (such as -seccomp, LSM, etc) might be considered. +to RO memory, which is, in a way, by design. And those could be blocked +by different security measures. Those cases are: - -- Write to read-only memory through /proc/self/mem interface. -- Write to read-only memory through ptrace (such as PTRACE_POKETEXT). -- userfaultfd. + - Write to read-only memory through /proc/self/mem interface (FOLL_FORCE). + - Write to read-only memory through ptrace (such as PTRACE_POKETEXT). + - userfaultfd. The idea that inspired this patch comes from Stephen Röttger’s work in V8 CFI [4]. Chrome browser in ChromeOS will be the first user of this API. -Reference: -========== -[1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 - -[2] https://man.openbsd.org/mimmutable.2 - -[3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com - -[4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc +Reference +========= +- [1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274 +- [2] https://man.openbsd.org/mimmutable.2 +- [3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com +- [4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc