[20/28] dpll: zl3073x: Add support to get/set priority on input pins

Commit Message

Ivan Vecera April 7, 2025, 5:32 p.m. UTC

This adds support for getting and setting input pin priority. Implement
required callbacks and set appropriate capability for input pins.
Although the pin priority make sense only if the DPLL is running in
automatic mode we have to expose this capability unconditionally because
input pins (references) are shared between both DPLLs where on of them
can run in automatic mode while the other one not.

Reviewed-by: Michal Schmidt <[e-mail]>
Co-developed-by: Prathosh Satish <[e-mail]>
Signed-off-by: Prathosh Satish <[e-mail]>
Signed-off-by: Ivan Vecera <[e-mail]>
---
 drivers/dpll/dpll_zl3073x.c | 82 +++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

Patch

diff --git a/drivers/dpll/dpll_zl3073x.c b/drivers/dpll/dpll_zl3073x.c
index ad2a8d383daaf..072a33ec12399 100644
--- a/drivers/dpll/dpll_zl3073x.c
+++ b/drivers/dpll/dpll_zl3073x.c
@@ -403,6 +403,45 @@  zl3073x_dpll_ref_prio_get(struct zl3073x_dpll_pin *pin, u8 *prio)
 	return rc;
 }
 
+static int
+zl3073x_dpll_ref_prio_set(struct zl3073x_dpll_pin *pin, u8 prio)
+{
+	struct zl3073x_dpll *zldpll = pin_to_dpll(pin);
+	struct zl3073x_dev *zldev = zldpll->mfd;
+	u8 idx, ref_prio;
+	int rc;
+
+	/* Read DPLL configuration into mailbox */
+	rc = zl3073x_mb_dpll_read(zldev, zldpll->id);
+	if (rc)
+		return rc;
+
+	/* Get index of the pin */
+	idx = zl3073x_dpll_pin_index_get(pin);
+
+	/* Read ref prio nibble */
+	rc = zl3073x_read_dpll_ref_prio(zldev, idx / 2, &ref_prio);
+	if (rc)
+		return rc;
+
+	/* Update nibble according pin type */
+	if (zl3073x_dpll_is_p_pin(pin)) {
+		ref_prio &= ~DPLL_REF_PRIO_REF_P;
+		ref_prio |= FIELD_PREP(DPLL_REF_PRIO_REF_P, prio);
+	} else {
+		ref_prio &= ~DPLL_REF_PRIO_REF_N;
+		ref_prio |= FIELD_PREP(DPLL_REF_PRIO_REF_N, prio);
+	}
+
+	/* Write the updated priority value */
+	rc = zl3073x_write_dpll_ref_prio(zldev, idx / 2, ref_prio);
+	if (rc)
+		return rc;
+
+	/* Update channel configuration from mailbox */
+	return zl3073x_mb_dpll_write(zldev, zldpll->id);
+}
+
 static int
 zl3073x_dpll_input_pin_state_on_dpll_get(const struct dpll_pin *dpll_pin,
 					 void *pin_priv,
@@ -500,6 +539,46 @@  zl3073x_dpll_input_pin_state_on_dpll_set(const struct dpll_pin *dpll_pin,
 	return rc;
 }
 
+static int
+zl3073x_dpll_input_pin_prio_get(const struct dpll_pin *dpll_pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				u32 *prio, struct netlink_ext_ack *extack)
+{
+	struct zl3073x_dpll_pin *pin = pin_priv;
+
+	*prio = pin->prio;
+
+	return 0;
+}
+
+static int
+zl3073x_dpll_input_pin_prio_set(const struct dpll_pin *dpll_pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				u32 prio, struct netlink_ext_ack *extack)
+{
+	struct zl3073x_dpll *zldpll = dpll_priv;
+	struct zl3073x_dev *zldev = zldpll->mfd;
+	struct zl3073x_dpll_pin *pin = pin_priv;
+	int rc;
+
+	if (prio > DPLL_REF_PRIO_MAX)
+		return -EINVAL;
+
+	/* If the pin is selectable then update HW registers */
+	if (pin->selectable) {
+		guard(zl3073x)(zldev);
+
+		rc = zl3073x_dpll_ref_prio_set(pin, prio);
+		if (rc)
+			return rc;
+	}
+
+	/* Save priority */
+	pin->prio = prio;
+
+	return 0;
+}
+
 static int
 zl3073x_dpll_output_pin_state_on_dpll_get(const struct dpll_pin *dpll_pin,
 					  void *pin_priv,
@@ -575,6 +654,8 @@  zl3073x_dpll_mode_get(const struct dpll_device *dpll, void *dpll_priv,
 
 static const struct dpll_pin_ops zl3073x_dpll_input_pin_ops = {
 	.direction_get = zl3073x_dpll_pin_direction_get,
+	.prio_get = zl3073x_dpll_input_pin_prio_get,
+	.prio_set = zl3073x_dpll_input_pin_prio_set,
 	.state_on_dpll_get = zl3073x_dpll_input_pin_state_on_dpll_get,
 	.state_on_dpll_set = zl3073x_dpll_input_pin_state_on_dpll_set,
 };
@@ -736,6 +817,7 @@  zl3073x_dpll_pin_info_get(struct zl3073x_dpll_pin *pin)
 	if (zl3073x_dpll_is_input_pin(pin)) {
 		pin_info->props.type = DPLL_PIN_TYPE_EXT;
 		pin_info->props.capabilities =
+			DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE |
 			DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
 	} else {
 		pin_info->props.type = DPLL_PIN_TYPE_GNSS;