| Message ID | 3ca525852ce14a8e04949ff115cb6ec28c8f120b.1671098103.git.baskov@ispras.ru (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | x86_64: Improvements at compressed kernel stage | expand |
On Thu, 15 Dec 2022 at 13:38, Evgeniy Baskov <baskov@ispras.ru> wrote: > > Check if there are simultaneously writable and executable > program segments in vmlinux ELF image and fail build if there are any. > > This would prevent accidental introduction of RWX segments. > > Tested-by: Mario Limonciello <mario.limonciello@amd.com> > Tested-by: Peter Jones <pjones@redhat.com> > Signed-off-by: Evgeniy Baskov <baskov@ispras.ru> > --- > arch/x86/boot/compressed/Makefile | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile > index 1acff356d97a..4dcab38f5a38 100644 > --- a/arch/x86/boot/compressed/Makefile > +++ b/arch/x86/boot/compressed/Makefile > @@ -112,11 +112,17 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o > vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o > vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a > > +quiet_cmd_wx_check = WXCHK $< > +cmd_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; \ > + then (echo >&2 "$<: Simultaneously writable and executable sections are prohibited"; \ > + /bin/false); fi > + > $(obj)/vmlinux: $(vmlinux-objs-y) FORCE > $(call if_changed,ld) > > OBJCOPYFLAGS_vmlinux.bin := -R .comment -S > $(obj)/vmlinux.bin: vmlinux FORCE > + $(call cmd,wx_check) This breaks the way we track dependencies between make targets: the FORCE will result in the check being performed every time, even if nothing gets rebuilt. Better to do something like the below (apologies for the alphabet soup) --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -112,18 +112,17 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a -quiet_cmd_wx_check = WXCHK $< -cmd_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; \ - then (echo >&2 "$<: Simultaneously writable and executable sections are prohibited"; \ - /bin/false); fi +quiet_cmd_objcopy_and_wx_check = $(quiet_cmd_objcopy) + cmd_objcopy_and_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; then \ + (echo >&2 "$<: Simultaneously writable and executable sections are prohibited"; \ + /bin/false); else $(cmd_objcopy); fi $(obj)/vmlinux: $(vmlinux-objs-y) FORCE $(call if_changed,ld) OBJCOPYFLAGS_vmlinux.bin := -R .comment -S $(obj)/vmlinux.bin: vmlinux FORCE - $(call cmd,wx_check) - $(call if_changed,objcopy) + $(call if_changed,objcopy_and_wx_check)
On 2023-03-08 12:34, Ard Biesheuvel wrote: > On Thu, 15 Dec 2022 at 13:38, Evgeniy Baskov <baskov@ispras.ru> wrote: >> >> Check if there are simultaneously writable and executable >> program segments in vmlinux ELF image and fail build if there are any. >> >> This would prevent accidental introduction of RWX segments. >> >> Tested-by: Mario Limonciello <mario.limonciello@amd.com> >> Tested-by: Peter Jones <pjones@redhat.com> >> Signed-off-by: Evgeniy Baskov <baskov@ispras.ru> >> --- >> arch/x86/boot/compressed/Makefile | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/arch/x86/boot/compressed/Makefile >> b/arch/x86/boot/compressed/Makefile >> index 1acff356d97a..4dcab38f5a38 100644 >> --- a/arch/x86/boot/compressed/Makefile >> +++ b/arch/x86/boot/compressed/Makefile >> @@ -112,11 +112,17 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o >> vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o >> vmlinux-objs-$(CONFIG_EFI_STUB) += >> $(objtree)/drivers/firmware/efi/libstub/lib.a >> >> +quiet_cmd_wx_check = WXCHK $< >> +cmd_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; \ >> + then (echo >&2 "$<: Simultaneously writable and >> executable sections are prohibited"; \ >> + /bin/false); fi >> + >> $(obj)/vmlinux: $(vmlinux-objs-y) FORCE >> $(call if_changed,ld) >> >> OBJCOPYFLAGS_vmlinux.bin := -R .comment -S >> $(obj)/vmlinux.bin: vmlinux FORCE >> + $(call cmd,wx_check) > > This breaks the way we track dependencies between make targets: the > FORCE will result in the check being performed every time, even if > nothing gets rebuilt. > > Better to do something like the below (apologies for the alphabet soup) > > > --- a/arch/x86/boot/compressed/Makefile > +++ b/arch/x86/boot/compressed/Makefile > @@ -112,18 +112,17 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o > vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o > vmlinux-objs-$(CONFIG_EFI_STUB) += > $(objtree)/drivers/firmware/efi/libstub/lib.a > > -quiet_cmd_wx_check = WXCHK $< > -cmd_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; \ > - then (echo >&2 "$<: Simultaneously writable and > executable sections are prohibited"; \ > - /bin/false); fi > +quiet_cmd_objcopy_and_wx_check = $(quiet_cmd_objcopy) > + cmd_objcopy_and_wx_check = if $(OBJDUMP) -p $< | grep "flags > .wx" > /dev/null; then \ > + (echo >&2 "$<: Simultaneously > writable and executable sections are prohibited"; \ > + /bin/false); else > $(cmd_objcopy); fi > > $(obj)/vmlinux: $(vmlinux-objs-y) FORCE > $(call if_changed,ld) > > OBJCOPYFLAGS_vmlinux.bin := -R .comment -S > $(obj)/vmlinux.bin: vmlinux FORCE > - $(call cmd,wx_check) > - $(call if_changed,objcopy) > + $(call if_changed,objcopy_and_wx_check) Thank you for suggestion! I will fix it.
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 1acff356d97a..4dcab38f5a38 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -112,11 +112,17 @@ vmlinux-objs-$(CONFIG_EFI) += $(obj)/efi.o vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_mixed.o vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a +quiet_cmd_wx_check = WXCHK $< +cmd_wx_check = if $(OBJDUMP) -p $< | grep "flags .wx" > /dev/null; \ + then (echo >&2 "$<: Simultaneously writable and executable sections are prohibited"; \ + /bin/false); fi + $(obj)/vmlinux: $(vmlinux-objs-y) FORCE $(call if_changed,ld) OBJCOPYFLAGS_vmlinux.bin := -R .comment -S $(obj)/vmlinux.bin: vmlinux FORCE + $(call cmd,wx_check) $(call if_changed,objcopy) targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs