[v2,0/2] Enable sensors support for the Congatec Board Controller

Message

Thomas Richard Nov. 8, 2024, 3:08 p.m. UTC

This is the second iteration of this series which enables sensors support
for the Congatec Board Controller.

The main change in the hwmon driver is that now a channel id always refers
to the same sensor. So in0 is always "CPU voltage", temp1 is always "CPU
Temperature", ...

Regards,

Thomas

Signed-off-by: Thomas Richard <[e-mail]>
---
Changes in v2:
- hwmon: use unsigned int type instead of u8 in struct cgbc_hwmon_sensor
  and struct cgbc_hwmon_data.
- hwmon: in cgbc_hwmon_probe_sensors() no need to request data for the
  first sensor as the Board Controller returns data of the first sensors
  with the number of sensors.
- hwmon: fix typos in comments and improve them.
- hwmon: remove dead code in cgbc_hwmon_read() and in
  cgbc_hwmon_read_string() (deadcode was the 'return -ENODEV').
- hwmon: remove useless platform_set_drvdata().
- hwmon: channel id always refers to the same sensor.
- hwmon: add a enum cgbc_sensor_types.
- Link to v1: https://lore.kernel.org/r/[e-mail]

---
Thomas Richard (2):
      hwmon: Add Congatec Board Controller monitoring driver
      mfd: cgbc: add a hwmon cell

 MAINTAINERS                |   1 +
 drivers/hwmon/Kconfig      |   9 ++
 drivers/hwmon/Makefile     |   1 +
 drivers/hwmon/cgbc-hwmon.c | 314 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mfd/cgbc-core.c    |   1 +
 5 files changed, 326 insertions(+)
---
base-commit: 1ffec08567f426a1c593e038cadc61bdc38cb467
change-id: 20240809-congatec-board-controller-hwmon-e9e63d957d33

Best regards,