mbox series

[0/2] hwmon: Add support for TI TPS389008

Message ID 20250319170234.63723-1-flaviu.nistor@gmail.com (mailing list archive)
Headers show
Series hwmon: Add support for TI TPS389008 | expand

Message

Flaviu Nistor March 19, 2025, 5:02 p.m. UTC 
This series adds support and documentation for the TI TPS389008,
TPS389006 and TPS389004 voltage monitor IC's.

This I2C device provides 8 bit ADC conversion result for all
input channels.

The proposed driver implements the logic to perform the ADC read.

The features this driver does not support (alarms and thresholds
for the alarms) have been documented in the "Known Issues" section.

The complete supported functionality has been tested with a TPS389008
and TPS389006 voltage monitors connected to a Raspberry Pi 4.
Different device tree node definitions have been tested with success.

Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>

Flaviu Nistor (2):
  hwmon: Add support for TI TPS389008
  dt-bindings: hwmon: Add TI TPS389008

 .../bindings/hwmon/ti,tps389008.yaml          | 140 ++++++
 Documentation/hwmon/index.rst                 |   1 +
 Documentation/hwmon/tps389008.rst             |  56 +++
 MAINTAINERS                                   |   8 +
 drivers/hwmon/Kconfig                         |  10 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/tps389008.c                     | 466 ++++++++++++++++++
 7 files changed, 682 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tps389008.yaml
 create mode 100644 Documentation/hwmon/tps389008.rst
 create mode 100644 drivers/hwmon/tps389008.c