Show patches with: Archived = No       |   9030 patches
« 1 2 ... 59 60 6190 91 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
ACPI: Use valid link of ACPI specification ACPI: Use valid link of ACPI specification - - - --- 2020-07-27 Tiezhu Yang Not Applicable
[v6,9/9] dt-bindings: hwmon: Add bindings for ADM1266 hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,8/9] hwmon: pmbus: adm1266: program configuration hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,7/9] hwmon: pmbus: adm1266: program firmware hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,6/9] hwmon: pmbus: adm1266: Add group command support hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,5/9] hwmon: pmbus: adm1266: read blackbox hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,4/9] hwmon: pmbus: adm1266: add debugfs for states hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,3/9] hwmon: pmbus: adm1266: Add support for GPIOs hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,2/9] hwmon: pmbus: adm1266: Add Block process call hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,1/9] hwmon: pmbus: adm1266: add support hwmon: pmbus: adm1266: add support - - - --- 2020-07-27 Alexandru Tachici Superseded
[v6,13/13] arm64: defconfig: enable the sl28cpld board management controller Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,12/13] arm64: dts: freescale: sl28: enable fan support Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,11/13] arm64: dts: freescale: sl28: enable LED support Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,10/13] arm64: dts: freescale: sl28: map GPIOs to input events Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,09/13] arm64: dts: freescale: sl28: enable sl28cpld Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,08/13] hwmon: add support for the sl28cpld hardware monitoring controller Add support for Kontron sl28cpld 1 1 - --- 2020-07-25 Michael Walle Not Applicable
[v6,07/13] gpio: add support for the sl28cpld GPIO controller Add support for Kontron sl28cpld - 2 - --- 2020-07-25 Michael Walle Not Applicable
[v6,06/13] pwm: add support for sl28cpld PWM controller Add support for Kontron sl28cpld 1 - - --- 2020-07-25 Michael Walle Not Applicable
[v6,05/13] watchdog: add support for sl28cpld watchdog Add support for Kontron sl28cpld 1 - - --- 2020-07-25 Michael Walle Not Applicable
[v6,04/13] irqchip: add sl28cpld interrupt controller support Add support for Kontron sl28cpld 1 - - --- 2020-07-25 Michael Walle Not Applicable
[v6,03/13] mfd: simple-mfd-i2c: add sl28cpld support Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[v6,02/13] dt-bindings: mfd: Add bindings for sl28cpld Add support for Kontron sl28cpld - 1 - --- 2020-07-25 Michael Walle Not Applicable
[v6,01/13] mfd: add simple regmap based I2C driver Add support for Kontron sl28cpld - - - --- 2020-07-25 Michael Walle Not Applicable
[-next] hwmon (pmbus/max20730): Whitespace cleanups in max20730.c [-next] hwmon (pmbus/max20730): Whitespace cleanups in max20730.c - - - --- 2020-07-24 Wangshaobo (bobo) Not Applicable
hwmon: add fan/pwm driver for corsair h100i platinum hwmon: add fan/pwm driver for corsair h100i platinum - - - --- 2020-07-23 jaap aarts Superseded
[-next] hwmon: sparx5: Make symbol 's5_temp_match' static [-next] hwmon: sparx5: Make symbol 's5_temp_match' static - - - --- 2020-07-21 Wei Yongjun Accepted
hwmon: corsair-cpro: add reading pwm values hwmon: corsair-cpro: add reading pwm values - - - --- 2020-07-21 Marius Zachmann Accepted
[v3] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 [v3] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 - 1 - --- 2020-07-21 Chu Lin Handled Elsewhere
[v3] dt-bindings: hwmon: adm1272: add analog,temp1-enable binding [v3] dt-bindings: hwmon: adm1272: add analog,temp1-enable binding - - - --- 2020-07-21 Chu Lin Handled Elsewhere
[v2] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 [v2] hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 - - - --- 2020-07-20 Chu Lin Superseded
[v2] dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding [v2] dt-bindings: hwmon: adm1272: add analog-temperature1-enable binding - - - --- 2020-07-20 Chu Lin Superseded
dt-bindings: thermal: Get rid of thermal.txt and replace references dt-bindings: thermal: Get rid of thermal.txt and replace references 1 - - --- 2020-07-20 Amit Kucheria Not Applicable
[for,v5.9] hwmon: (tmp401) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (tmp401) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (lm95234) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (lm95234) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (lm90) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (lm90) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (k8temp) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (k8temp) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (jc42) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (jc42) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (ina2xx) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (ina2xx) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: (ina209) Replace HTTP links with HTTPS ones [for,v5.9] hwmon: (ina209) Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] hwmon: Replace HTTP links with HTTPS ones [for,v5.9] hwmon: Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[for,v5.9] docs: hwmon: Replace HTTP links with HTTPS ones [for,v5.9] docs: hwmon: Replace HTTP links with HTTPS ones - - - --- 2020-07-19 Alexander A. Klimov Accepted
[GIT,PULL] hwmon fixes for v5.8-rc6 [GIT,PULL] hwmon fixes for v5.8-rc6 - - - --- 2020-07-18 Guenter Roeck Not Applicable
[v3] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives [v3] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives - - - --- 2020-07-18 Maciej S. Szmigiero Accepted
[V2] hwmon: add fan/pwm driver for corsair h100i platinum [V2] hwmon: add fan/pwm driver for corsair h100i platinum - - - --- 2020-07-17 jaap aarts Changes Requested
[v3] hwmon: corsair-cpro: Change to HID driver [v3] hwmon: corsair-cpro: Change to HID driver - - - --- 2020-07-15 Marius Zachmann Accepted
[v2] hwmon: corsair-cpro: Change to HID driver [v2] hwmon: corsair-cpro: Change to HID driver - - - --- 2020-07-15 Marius Zachmann Superseded
[RESEND] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe() [RESEND] hwmon: scmi: fix potential buffer overflow in scmi_hwmon_probe() - 1 - --- 2020-07-15 Cristian Marussi Accepted
hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D - - - --- 2020-07-14 Guenter Roeck Accepted
hwmon: corsair-cpro: Change to hid driver hwmon: corsair-cpro: Change to hid driver - - - --- 2020-07-14 Marius Zachmann Superseded
hwmon: add fan/pwm driver for corsair h100i platinum hwmon: add fan/pwm driver for corsair h100i platinum - - - --- 2020-07-14 jaap aarts Changes Requested
[6/6] added some comments and fixed some styling [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
[5/6] allow setting enable instead of mode, and support enable 2/3/4 [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
[4/6] automatic fan count detection [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
[3/6] rpm support for asetek gen 6 driver [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
[2/6] fan support for asetek gen 6 driver [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
[1/6] skeleton for asetek gen 6 driver [1/6] skeleton for asetek gen 6 driver - - - --- 2020-07-13 jaap aarts Superseded
hwmon: (adm1025) Replace HTTP links with HTTPS ones hwmon: (adm1025) Replace HTTP links with HTTPS ones - - - --- 2020-07-13 Alexander A. Klimov Accepted
[RFC,17/35] hwmon: (sis5595) Tidy Success/Failure checks Untitled series #317301 - - - --- 2020-07-13 Saheed O. Bolarinwa Changes Requested
[RFC,16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0 Untitled series #317301 - - - --- 2020-07-13 Saheed O. Bolarinwa Changes Requested
[v6,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml shtc1: add support for device tree bindings - - - --- 2020-07-12 Chris Ruehl Superseded
[v6,1/2] hwmon: shtc1: add support for device tree bindings shtc1: add support for device tree bindings - 1 1 --- 2020-07-12 Chris Ruehl Superseded
[v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives [v2] hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives - - - --- 2020-07-11 Maciej S. Szmigiero Changes Requested
hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives - - - --- 2020-07-10 Maciej S. Szmigiero Superseded
[v5,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml shtc1: add support for device tree bindings - - - --- 2020-07-10 Chris Ruehl Superseded
[v5,1/2] hwmon: shtc1: add support for device tree bindings shtc1: add support for device tree bindings - 1 - --- 2020-07-10 Chris Ruehl Superseded
hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 hwmon: adm1272: Enable temperature sampling for adm1272 adm1278 - - - --- 2020-07-10 Chu Lin Superseded
dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding - - - --- 2020-07-10 Chu Lin Superseded
[v2] hwmon: corsair-cpro: add fan_target [v2] hwmon: corsair-cpro: add fan_target - - - --- 2020-07-09 Marius Zachmann Accepted
hwmon: corsair-cpro: add fan_target hwmon: corsair-cpro: add fan_target - - - --- 2020-07-09 Marius Zachmann Changes Requested
[v2] hwmon: adm1275: Make sure we are reading enough data for different chips [v2] hwmon: adm1275: Make sure we are reading enough data for different chips - - - --- 2020-07-09 Chu Lin Accepted
hwmon: adm1275: Make sure we are reading enough data for different chips hwmon: adm1275: Make sure we are reading enough data for different chips - - - --- 2020-07-08 Chu Lin Superseded
[v4,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml shtc1: add support for device tree bindings - - - --- 2020-07-08 Chris Ruehl Superseded
[v4,1/2] hwmon: shtc1: add support for device tree bindings shtc1: add support for device tree bindings - 1 - --- 2020-07-08 Chris Ruehl Superseded
[v4] hwmon:max6697: Allow max6581 to create tempX_offset [v4] hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-07 Chu Lin Accepted
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute hwmon: (emc2103) fix unable to change fan pwm1_enable attribute - - - --- 2020-07-07 Vishwas M Accepted
[v3,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml shtc1: add support for device tree bindings - - - --- 2020-07-07 Chris Ruehl Superseded
[v3,1/2] hwmon: shtc1: add support for device tree bindings shtc1: add support for device tree bindings - - - --- 2020-07-07 Chris Ruehl Superseded
[v3,1/1] hwmon:max6697: Allows max6581 to create tempX_offset attributes hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-07 Chu Lin Changes Requested
[v3,2/2] hwmon:max6697: fixing the type issue where the comparison is always true hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-07 Chu Lin Superseded
[v3,1/2] hwmon:max6697: Allow max6581 to create tempX_offset hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-07 Chu Lin Superseded
[v2,1/1] hwmon:max6697: Allow max6581 to create tempX_offset hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-06 Chu Lin Superseded
hwmon:max6697: Allow max6581 to create tempX_offset hwmon:max6697: Allow max6581 to create tempX_offset - - - --- 2020-07-06 Chu Lin Superseded
[v5,13/13] arm64: dts: freescale: sl28: enable fan support Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,12/13] arm64: dts: freescale: sl28: enable LED support Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,11/13] arm64: dts: freescale: sl28: map GPIOs to input events Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,10/13] arm64: dts: freescale: sl28: enable sl28cpld Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,09/13] hwmon: add support for the sl28cpld hardware monitoring controller Add support for Kontron sl28cpld 1 - - --- 2020-07-06 Michael Walle Not Applicable
[v5,08/13] gpio: add support for the sl28cpld GPIO controller Add support for Kontron sl28cpld - 1 - --- 2020-07-06 Michael Walle Not Applicable
[v5,07/13] pwm: add support for sl28cpld PWM controller Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,06/13] watchdog: add support for sl28cpld watchdog Add support for Kontron sl28cpld 1 - - --- 2020-07-06 Michael Walle Not Applicable
[v5,05/13] irqchip: add sl28cpld interrupt controller support Add support for Kontron sl28cpld 1 - - --- 2020-07-06 Michael Walle Not Applicable
[v5,04/13] mfd: simple-mfd-i2c: add sl28cpld support Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,03/13] dt-bindings: mfd: Add bindings for sl28cpld Add support for Kontron sl28cpld - 1 - --- 2020-07-06 Michael Walle Not Applicable
[v5,02/13] mfd: add simple regmap based I2C driver Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
[v5,01/13] regmap-irq: use fwnode instead of device node in add_irq_chip() Add support for Kontron sl28cpld - - - --- 2020-07-06 Michael Walle Not Applicable
hwmon: amd_energy: match for supported models hwmon: amd_energy: match for supported models - - - --- 2020-07-06 Naveen Krishna Chatradhi Accepted
[v2,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml shtc1: add support for device tree bindings - - - --- 2020-07-05 Chris Ruehl Changes Requested
[v2,1/2] hwmon: shtc1: add support for device tree bindings shtc1: add support for device tree bindings - - - --- 2020-07-05 Chris Ruehl Changes Requested
[GIT,PULL] hwmon fixes for v5.8-rc4 [GIT,PULL] hwmon fixes for v5.8-rc4 - - - --- 2020-07-03 Guenter Roeck Not Applicable
[5/5] Documenation: hwmon/w83l786ng: drop duplicate words Documenation: hwmon: eliminate doubled words - - - --- 2020-07-03 Randy Dunlap Accepted
« 1 2 ... 59 60 6190 91 »