diff mbox

[08/10] leds: Add binding for Juniper's I2CS FPGA

Message ID 1475853669-22480-9-git-send-email-pantelis.antoniou@konsulko.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Pantelis Antoniou Oct. 7, 2016, 3:21 p.m. UTC
From: Georgi Vlaev <gvlaev@juniper.net>

Document bindings for the I2CS FPGA leds.

Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
---
 .../devicetree/bindings/leds/leds-i2cs.txt         | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-i2cs.txt

Comments

Jacek Anaszewski Oct. 10, 2016, 9:41 a.m. UTC | #1
Hi Pantelis,

On 10/07/2016 05:21 PM, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@juniper.net>
>
> Document bindings for the I2CS FPGA leds.
>
> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
> ---
>  .../devicetree/bindings/leds/leds-i2cs.txt         | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-i2cs.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-i2cs.txt b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
> new file mode 100644
> index 0000000..100e584
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
> @@ -0,0 +1,34 @@
> +Juniper I2CS LED driver.
> +
> +This is present in Juniper platforms that use a I2CS Slave FPGA.
> +
> +Required properties:
> +  - compatible: must be "jnx,leds-i2cs"

s/compatible:/compatible :/

Also treat the description as a regular sentence, i.e. begin it
with a capital letter and put a dot at the end.

> +  - #address-cells : must be 1.
> +  - #size-cells : must be 0.

s/must/Must/

> +Each led is represented as a sub-node of the jnx,leds-i2cs device.
> +
> +LED sub-node properties:
> +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
> +- reg : number of LED
> +- linux,default-trigger : (optional)
> +   see Documentation/devicetree/bindings/leds/common.txt

Driver uses also "hw-blink" property. Please document it here, but
add also a prefix:

jnx,hw-blink

Also "jnx" entry should be added to 
Documentation/devicetree/bindings/vendor-prefixes.txt.

> +Example:
> +
> +leds_fpc0: leds-jnx-i2cs {
> +	compatible = "jnx,leds-i2cs";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	fpc0-fail {
> +		reg = <1>;

It would be good to provide also an example of "label"
property to suggest LED class device name according to
the LED class device naming convention.
See Documentation/leds/leds-class.txt for details.

> +		linux,default-trigger = "fpc0-fail";
> +	};
> +
> +	fpc0-ok {
> +		reg = <2>;
> +		linux,default-trigger = "fpc0-ok";
> +	};
> +};
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-i2cs.txt b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
new file mode 100644
index 0000000..100e584
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-i2cs.txt
@@ -0,0 +1,34 @@ 
+Juniper I2CS LED driver.
+
+This is present in Juniper platforms that use a I2CS Slave FPGA.
+
+Required properties:
+  - compatible: must be "jnx,leds-i2cs"
+  - #address-cells : must be 1.
+  - #size-cells : must be 0.
+
+Each led is represented as a sub-node of the jnx,leds-i2cs device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+leds_fpc0: leds-jnx-i2cs {
+	compatible = "jnx,leds-i2cs";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	fpc0-fail {
+		reg = <1>;
+		linux,default-trigger = "fpc0-fail";
+	};
+
+	fpc0-ok {
+		reg = <2>;
+		linux,default-trigger = "fpc0-ok";
+	};
+};