@@ -208,11 +208,13 @@ static ssize_t get_cpu_vid(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, get_cpu_vid, NULL);
-#define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
-#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, 255)
+#define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4)
+#define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4)
+#define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95)
-#define IN_FROM_REG(val) ((val) * 19)
-#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255)
+#define IN_FROM_REG(val) ((val) * 19)
+#define IN_CLAMP(val) clamp_val(val, 0, 255 * 19)
+#define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19)
static ssize_t get_in_input(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -349,8 +351,13 @@ static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR,
#define DIV_FROM_REG(val) (1 << (val))
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div))))
-#define FAN_TO_REG(val, div) ((val) <= 0 ? 0 : \
- clamp_val((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255))
+
+#define FAN_BASE(div) (480000 >> (div))
+#define FAN_CLAMP(val, div) clamp_val(val, FAN_BASE(div) / 255, \
+ FAN_BASE(div))
+#define FAN_TO_REG(val, div) ((val) == 0 ? 0 : \
+ DIV_ROUND_CLOSEST(480000, \
+ FAN_CLAMP(val, div) << (div)))
static ssize_t get_fan_input(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -513,9 +520,9 @@ static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(fan1_off, S_IRUGO | S_IWUSR,
get_fan_off, set_fan_off);
-#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
-#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \
- (val) - 500 : (val) + 500) / 1000) + 130), 0, 255)
+#define TEMP_FROM_REG(val) (((val) - 130) * 1000)
+#define TEMP_CLAMP(val) clamp_val(val, -130000, 125000)
+#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 130)
static ssize_t get_temp_input(struct device *dev, struct device_attribute *attr,
char *buf)
Writes into limit attributes can overflow due to multplications and additions with unbound input values. Writing into fan limit attributes can result in a crash with a division by zero if very large values are written and the fan divider is larger than 1. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- v2: Catch overflow (and resulting crash) seen when writing certain values into fan limit attributes drivers/hwmon/gl520sm.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)